Button not detected...

[alexe100]

x64 desktop, Ubuntu, Asus BT400 dongle and one flic button

1#. I plugged bt400

[42237.430646] usb 3-3: USB disconnect, device number 10
[42238.982636] usb 3-3: new full-speed USB device number 11 using xhci_hcd
[42239.114122] usb 3-3: New USB device found, idVendor=0b05, idProduct=17cb
[42239.114132] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[42239.114139] usb 3-3: Product: BCM20702A0
[42239.114144] usb 3-3: Manufacturer: Broadcom Corp
[42239.114149] usb 3-3: SerialNumber: 5CF37072FC0E
[42239.224702] Bluetooth: hci0: BCM: chip id 63
[42239.240714] Bluetooth: hci0: BCM20702A
[42239.241745] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[42239.241787] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2
[42239.241793] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17cb.hcd not found

#2. Console 1:

.../fliclib-linux-hci-master/bin/x86_64$ ./flicd -f flic.sqlite3
Available HCI devices found:
hci0

Trying hci0
hci0 is busy, shutting down and retrying...
Successfully bound HCI socket
Flic server is now up and running!
Initialization of Bluetooth controller done!

#3. console 2:

.../fliclib-linux-hci-master/simpleclient$ ./simpleclient localhost
Available commands:
getInfo - get various info about the server state and previously verified buttons
startScanWizard - start scan wizard
cancelScanWizard - cancel scan wizard
startScan - start a raw scanning of Flic buttons
stopScan - stop raw scanning
connect xx:xx:xx:xx:xx:xx id - first parameter is the bluetooth address of the button, second is an integer identifier you set to identify this connection
disconnect id - disconnect or abort pending connection
changeModeParameters id latency_mode auto_disconnect_time - change latency mode (NormalLatency/LowLatency/HighLatency) and auto disconnect time for this connection
forceDisconnect xx:xx:xx:xx:xx:xx - disconnect this button, even if other client program are connected
getButtonInfo xx:xx:xx:xx:xx:xx - get button info for a verified button
createBatteryStatusListener xx:xx:xx:xx:xx:xx id - first parameter is the bluetooth address of the button, second is an integer you set to identify this listener
removeBatteryStatusListener id - removes a battery listener
help - prints this help text

startScanWizard
Please click your Flic button!

(I clicked it at this time and I saw light blink)

Scan wizard done with status WizardFailedTimeout

Many thanks

[Emill]

Can you run "sudo btmon" in a separate terminal while you try to pair your button, and post the output from there (in a

code

block)?

[alexe100]

Already paired...

Now it is just needed to connect right?
The problem is to get the mac address. I got it using and android app

[Emill]

You can retrieve all paired devices' addresses using the getInfo command.