Skip to content

Latest commit

 

History

History
391 lines (292 loc) · 18.3 KB

devnotes.md

File metadata and controls

391 lines (292 loc) · 18.3 KB
Raw

devnotes toc

future ideas

list of dreams which will probably never happen

  • the JS is a mess -- a preact rewrite would be nice
    • preferably without build dependencies like webpack/babel/node.js, maybe a python thing to assemble js files into main.js
    • good excuse to look at using virtual lists (browsers start to struggle when folders contain over 5000 files)
    • maybe preact / vdom isn't the best choice, could just wait for the Next Big Thing
  • the UX is a mess -- a proper design would be nice
    • very organic (much like the python/js), everything was an afterthought
    • true for both the layout and the visual flair
    • something like the tron board-room ui (or most other hollywood ones, like ironman) would be 💯
      • would preferably keep the information density, just more organized yet not too boring
  • some of the python files are way too big
    • up2k.py ended up doing all the file indexing / db management
    • httpcli.py should be separated into modules in general

design

up2k

quick outline of the up2k protocol, see uploading for the web-client

  • the up2k client splits a file into an "optimal" number of chunks
    • 1 MiB each, unless that becomes more than 256 chunks
    • tries 1.5M, 2M, 3, 4, 6, ... until <= 256 chunks or size >= 32M
  • client posts the list of hashes, filename, size, last-modified
  • server creates the wark, an identifier for this upload
    • sha512( salt + filesize + chunk_hashes )
    • and a sparse file is created for the chunks to drop into
  • client sends a series of POSTs, with one or more consecutive chunks in each
    • header entries for the chunk-hashes (comma-separated) and wark
    • server writes chunks into place based on the hash
  • client does another handshake with the hashlist; server replies with OK or a list of chunks to reupload

up2k has saved a few uploads from becoming corrupted in-transfer already;

  • caught an android phone on wifi redhanded in wireshark with a bitflip, however bup with https would probably have noticed as well (thanks to tls also functioning as an integrity check)
  • also stopped someone from uploading because their ram was bad

regarding the frequent server log message during uploads;
6.0M 106M/s 2.77G 102.9M/s n948 thank 4/0/3/1 10042/7198 00:01:09

  • this chunk was 6 MiB, uploaded at 106 MiB/s
  • on this http connection, 2.77 GiB transferred, 102.9 MiB/s average, 948 chunks handled
  • client says 4 uploads OK, 0 failed, 3 busy, 1 queued, 10042 MiB total size, 7198 MiB and 00:01:09 left

why not tus

I didn't know about tus when I made this, but:

  • up2k has the advantage that it supports parallel uploading of non-contiguous chunks straight into the final file -- tus does a merge at the end which is slow and taxing on the server HDD / filesystem (unless i'm misunderstanding)
  • up2k has the slight disadvantage of requiring the client to hash the entire file before an upload can begin, but this has the benefit of immediately skipping duplicate files
    • and the hashing happens in a separate thread anyways so it's usually not a bottleneck

why chunk-hashes

a single sha512 would be better, right?

this was due to crypto.subtle not yet providing a streaming api (or the option to seed the sha512 hasher with a starting hash)

as a result, the hashes are much less useful than they could have been (search the server by sha512, provide the sha512 in the response http headers, ...)

however it allows for hashing multiple chunks in parallel, greatly increasing upload speed from fast storage (NVMe, raid-0 and such)

hashwasm would solve the streaming issue but reduces hashing speed for sha512 (xxh128 does 6 GiB/s), and it would make old browsers and iphones unsupported

  • blake2 might be a better choice since xxh is non-cryptographic, but that gets ~15 MiB/s on slower androids

hashed passwords

regarding the curious decisions

there is a static salt for all passwords;

  • because most copyparty APIs allow users to authenticate using only their password, making the username unknown, so impossible to do per-account salts
  • the drawback of this is that an attacker can bruteforce all accounts in parallel, however most copyparty instances only have a handful of accounts in the first place, and it can be compensated by increasing the hashing cost anyways

http api

  • table-column params = URL parameters; ?foo=bar&qux=...
  • table-column body = POST payload
  • method jPOST = json post
  • method mPOST = multipart post
  • method uPOST = url-encoded post
  • FILE = conventional HTTP file upload entry (rfc1867 et al, filename in Content-Disposition)

authenticate using header Cookie: cppwd=foo or url param &pw=foo

read

method params result
GET ?ls list files/folders at URL as JSON
GET ?ls&dots list files/folders at URL as JSON, including dotfiles
GET ?ls=t list files/folders at URL as plaintext
GET ?ls=v list files/folders at URL, terminal-formatted
GET ?lt in listings, use symlink timestamps rather than targets
GET ?b list files/folders at URL as simplified HTML
GET ?tree=. list one level of subdirectories inside URL
GET ?tree list one level of subdirectories for each level until URL
GET ?tar download everything below URL as a gnu-tar file
GET ?tar=gz:9 ...as a gzip-level-9 gnu-tar file
GET ?tar=xz:9 ...as an xz-level-9 gnu-tar file
GET ?tar=pax ...as a pax-tar file
GET ?tar=pax,xz ...as an xz-level-1 pax-tar file
GET ?zip=utf-8 ...as a zip file
GET ?zip ...as a WinXP-compatible zip file
GET ?zip=crc ...as an MSDOS-compatible zip file
GET ?tar&w pregenerate webp thumbnails
GET ?tar&j pregenerate jpg thumbnails
GET ?tar&p pregenerate audio waveforms
GET ?shares list your shared files/folders
GET ?dls show active downloads (do this as admin)
GET ?ups show recent uploads from your IP
GET ?ups&filter=f ...where URL contains f
GET ?mime=foo specify return mimetype foo
GET ?v render markdown file at URL
GET ?v open image/video/audio in mediaplayer
GET ?txt get file at URL as plaintext
GET ?txt=iso-8859-1 ...with specific charset
GET ?th get image/video at URL as thumbnail
GET ?th=opus convert audio file to 128kbps opus
GET ?th=caf ...in the iOS-proprietary container
method body result
jPOST {"q":"foo"} do a server-wide search; see the [🔎] search tab raw field for syntax
method params body result
jPOST ?tar ["foo","bar"] download folders foo and bar inside URL as a tar file

write

method params result
POST ?copy=/foo/bar copy the file/folder at URL to /foo/bar
POST ?move=/foo/bar move/rename the file/folder at URL to /foo/bar
method params body result
PUT (binary data) upload into file at URL
PUT ?gz (binary data) compress with gzip and write into file at URL
PUT ?xz (binary data) compress with xz and write into file at URL
mPOST f=FILE upload FILE into the folder at URL
mPOST ?j f=FILE ...and reply with json
mPOST ?replace f=FILE ...and overwrite existing files
mPOST ?media f=FILE ...and return medialink (not hotlink)
mPOST act=mkdir, name=foo create directory foo at URL
POST ?delete delete URL recursively
POST ?eshare=rm stop sharing a file/folder
POST ?eshare=3 set expiration to 3 minutes
jPOST ?share (complicated) create temp URL for file/folder
jPOST ?delete ["/foo","/bar"] delete /foo and /bar recursively
uPOST msg=foo send message foo into server log
mPOST act=tput, body=TEXT overwrite markdown document at URL

upload modifiers:

http-header url-param effect
Accept: url want=url return just the file URL
Rand: 4 rand=4 generate random filename with 4 characters
Life: 30 life=30 delete file after 30 seconds

  • life only has an effect if the volume has a lifetime, and the volume lifetime must be greater than the file's

  • server behavior of msg can be reconfigured with --urlform

admin

method params result
GET ?reload=cfg reload config files and rescan volumes
GET ?scan initiate a rescan of the volume which provides URL
GET ?stack show a stacktrace of all threads

general

method params result
GET ?pw=x logout
GET ?grid ui: show grid-view
GET ?imgs ui: show grid-view with thumbnails
GET ?grid=0 ui: show list-view
GET ?imgs=0 ui: show list-view
GET ?thumb ui, grid-mode: show thumbnails
GET ?thumb=0 ui, grid-mode: show icons

event hooks

on writing your own hooks

hook effects

hooks can cause intentional side-effects, such as redirecting an upload into another location, or creating+indexing additional files, or deleting existing files, by returning json on stdout

  • reloc can redirect uploads before/after uploading has finished, based on filename, extension, file contents, uploader ip/name etc.
  • idx informs copyparty about a new file to index as a consequence of this upload
  • del tells copyparty to delete an unrelated file by vpath

for these to take effect, the hook must be defined with the c1 flag; see example reloc-by-ext

a subset of effect types are available for a subset of hook types,

  • most hook types (xbu/xau/xbr/xar/xbd/xad/xm) support idx and del for all http protocols (up2k / basic-uploader / webdav), but not ftp/tftp/smb
  • most hook types will abort/reject the action if the hook returns nonzero, assuming flag c is given, see examples reject-extension and reject-mimetype
  • xbu supports reloc for all http protocols (up2k / basic-uploader / webdav), but not ftp/tftp/smb
  • xau supports reloc for basic-uploader / webdav only, not up2k or ftp/tftp/smb
    • so clients like sharex are supported, but not dragdrop into browser

to trigger indexing of files /foo/1.txt and /foo/bar/2.txt, a hook can print(json.dumps({"idx":{"vp":["/foo/1.txt","/foo/bar/2.txt"]}})) (and replace "idx" with "del" to delete instead)

  • note: paths starting with / are absolute URLs, but you can also do ../3.txt relative to the destination folder of each uploaded file

assumptions

mdns

  • outgoing replies will always fit in one packet
  • if a client mentions any of our services, assume it's not missing any
  • always answer with all services, even if the client only asked for a few
  • not-impl: probe tiebreaking (too complicated)
  • not-impl: unicast listen (assume avahi took it)

sfx repack

reduce the size of an sfx by removing features

if you don't need all the features, you can repack the sfx and save a bunch of space; all you need is an sfx and a copy of this repo (nothing else to download or build, except if you're on windows then you need msys2 or WSL)

  • 393k size of original sfx.py as of v1.1.3
  • 310k after ./scripts/make-sfx.sh re no-cm
  • 269k after ./scripts/make-sfx.sh re no-cm no-hl

the features you can opt to drop are

  • cm/easymde, the "fancy" markdown editor, saves ~89k
  • hl, prism, the syntax hilighter, saves ~41k
  • fnt, source-code-pro, the monospace font, saves ~9k
  • dd, the custom mouse cursor for the media player tray tab, saves ~2k

for the repack to work, first run one of the sfx'es once to unpack it

note: you can also just download and run /scripts/copyparty-repack.sh -- this will grab the latest copyparty release from github and do a few repacks; works on linux/macos (and windows with msys2 or WSL)

building

dev env setup

you need python 3.9 or newer due to type hints

the rest is mostly optional; if you need a working env for vscode or similar

python3 -m venv .venv
. .venv/bin/activate
pip install jinja2 strip_hints  # MANDATORY
pip install argon2-cffi  # password hashing
pip install mutagen  # audio metadata
pip install pyftpdlib  # ftp server
pip install partftpy  # tftp server
pip install impacket  # smb server -- disable Windows Defender if you REALLY need this on windows
pip install Pillow pyheif-pillow-opener pillow-avif-plugin  # thumbnails
pip install pyvips  # faster thumbnails
pip install psutil  # better cleanup of stuck metadata parsers on windows 
pip install black==21.12b0 click==8.0.2 bandit pylint flake8 isort mypy  # vscode tooling

just the sfx

if you just want to modify the copyparty source code (py/html/css/js) then this is the easiest approach

build the sfx using any of the following examples:

./scripts/make-sfx.sh           # regular edition
./scripts/make-sfx.sh fast      # build faster (worse js/css compression)
./scripts/make-sfx.sh gz no-cm  # gzip-compressed + no fancy markdown editor

build from release tarball

uses the included prebuilt webdeps

if you downloaded a release source tarball from github (for example copyparty-1.6.15.tar.gz so not the autogenerated one) you can build it like so,

python3 -m pip install --user -U build setuptools wheel jinja2 strip_hints
bash scripts/run-tests.sh python3  # optional
python3 -m build

if you are unable to use build, you can use the old setuptools approach instead,

python3 setup.py install --user setuptools wheel jinja2
python3 setup.py build
# you now have a wheel which you can install. or extract and repackage:
python3 setup.py install --skip-build --prefix=/usr --root=$HOME/pe/copyparty

complete release

also builds the sfx so skip the sfx section above

WARNING: rls.sh has not yet been updated with the docker-images and arch/nix packaging

does everything completely from scratch, straight from your local repo

in the scripts folder:

  • run make -C deps-docker to build all dependencies
  • run ./rls.sh 1.2.3 which uploads to pypi + creates github release + sfx

debugging

music playback halting on phones

mostly fine on android, but still haven't find a way to massage iphones into behaving well

  • conditionally starting/stopping mp.fau according to mp.au.readyState <3 or <4 doesn't help
  • loop=true doesn't work, and manually looping mp.fau from an onended also doesn't work (it does nothing)
  • assigning fau.currentTime in a timer doesn't work, as safari merely pretends to assign it
  • on ios 16.7.7, mp.fau can sometimes make everything visibly work correctly, but no audio is actually hitting the speakers

can be reproduced with --no-sendfile --s-wr-sz 8192 --s-wr-slp 0.3 --rsp-slp 6 and then play a collection of small audio files with the screen off, ffmpeg -i track01.cdda.flac -c:a libopus -b:a 128k -segment_time 12 -f segment smol-%02d.opus

discarded ideas

  • optimization attempts which didn't improve performance
  • single sha512 across all up2k chunks?
    • crypto.subtle cannot into streaming, would have to use hashwasm, expensive
  • separate sqlite table per tag
    • performance fixed by skipping some indexes (+mt.k)
  • audio fingerprinting
    • only makes sense if there can be a wasm client and that doesn't exist yet (except for olaf which is agpl hence counts as not existing)
  • os.copy_file_range for up2k cloning
    • almost never hit this path anyways
  • up2k partials ui
    • feels like there isn't much point
  • cache sha512 chunks on client
    • too dangerous -- overtaken by turbo mode
  • comment field
    • nah
  • look into android thumbnail cache file format
    • absolutely not
  • indexedDB for hashes, cfg enable/clear/sz, 2gb avail, ~9k for 1g, ~4k for 100m, 500k items before autoeviction
    • blank hashlist when up-ok to skip handshake
      • too many confusing side-effects
  • hls framework for Someone Else to drop code into :^)
    • probably not, too much stuff to consider -- seeking, start at offset, task stitching (probably np-hard), conditional passthru, rate-control (especially multi-consumer), session keepalive, cache mgmt...