diff --git a/hal/targets.json b/hal/targets.json index c48bdcba712..f122eaf261b 100644 --- a/hal/targets.json +++ b/hal/targets.json @@ -1550,6 +1550,22 @@ "extra_labels_add": ["NRF51_MICROBIT"], "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"] }, + "MTM_MTCONNECT04S": { + "inherits": ["MCU_NRF51_32K"], + "progen": {"target": "mtm-mtconnect04s"}, + "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"], + "release_versions": ["2"] + }, + "MTM_MTCONNECT04S_BOOT": { + "inherits": ["MCU_NRF51_32K_BOOT"], + "extra_labels_add": ["MTM_CONNECT04S"], + "macros_add": ["TARGET_MTM_CONNECT04S"] + }, + "MTM_MTCONNECT04S_OTA": { + "inherits": ["MCU_NRF51_32K_OTA"], + "extra_labels_add": ["MTM_CONNECT04S"], + "macros_add": ["TARGET_MTM_CONNECT04S"] + }, "TY51822R3": { "inherits": ["MCU_NRF51_32K_UNIFIED"], diff --git a/hal/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_MTM_MTCONNECT04S/PinNames.h b/hal/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_MTM_MTCONNECT04S/PinNames.h new file mode 100644 index 00000000000..5a834539c43 --- /dev/null +++ b/hal/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_MTM_MTCONNECT04S/PinNames.h @@ -0,0 +1,137 @@ +/* mbed Microcontroller Library + * Copyright (c) 2015 Nordic Semiconductor + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 3 + +typedef enum { + p0 = 0, + p1 = 1, + p2 = 2, + p3 = 3, + p4 = 4, + p5 = 5, + p6 = 6, + p7 = 7, + p8 = 8, + p9 = 9, + p10 = 10, + p11 = 11, + p12 = 12, + p13 = 13, + p14 = 14, + p15 = 15, + p16 = 16, + p17 = 17, + p18 = 18, + p19 = 19, + p20 = 20, + p21 = 21, + p22 = 22, + p23 = 23, + p24 = 24, + p25 = 25, + p26 = 26, + p27 = 27, + p28 = 28, + p29 = 29, + p30 = 30, + p31 = 31, + + P0_0 = p0, + P0_1 = p1, + P0_2 = p2, + P0_3 = p3, + P0_4 = p4, + P0_5 = p5, + P0_6 = p6, + P0_7 = p7, + + P0_8 = p8, + P0_9 = p9, + P0_10 = p10, + P0_11 = p11, + P0_12 = p12, + P0_13 = p13, + P0_14 = p14, + P0_15 = p15, + + P0_16 = p16, + P0_17 = p17, + P0_18 = p18, + P0_19 = p19, + P0_20 = p20, + P0_21 = p21, + P0_22 = p22, + P0_23 = p23, + + P0_24 = p24, + P0_25 = p25, + P0_26 = p26, + P0_27 = p27, + P0_28 = p28, + P0_29 = p29, + P0_30 = p30, + P0_31 = p31, + + LEDR = p16, + LEDG = p15, + LEDB = p6, + LED1 = LEDR, + LED2 = LEDG, + LED3 = LEDB, + LED4 = LEDB, + + RX_PIN_NUMBER = p4, + TX_PIN_NUMBER = p5, + CTS_PIN_NUMBER = p2, + RTS_PIN_NUMBER = p3, + + // mBed interface Pins + USBTX = TX_PIN_NUMBER, + USBRX = RX_PIN_NUMBER, + + I2C_SDA0 = p14, + I2C_SCL0 = p13, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullDown = 1, + PullUp = 3, + PullDefault = PullUp +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hal/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_MTM_MTCONNECT04S/device.h b/hal/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_MTM_MTCONNECT04S/device.h new file mode 100644 index 00000000000..3b470c68647 --- /dev/null +++ b/hal/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_MTM_MTCONNECT04S/device.h @@ -0,0 +1,38 @@ +// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches. +// Check the 'features' section of the target description in 'targets.json' for more details. +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + + + + + + + + + + + + + + + + +#include "objects.h" + +#endif diff --git a/tools/export/gcc_arm_mtm_mtconnect04S.tmpl b/tools/export/gcc_arm_mtm_mtconnect04S.tmpl new file mode 100644 index 00000000000..a2d1df6b721 --- /dev/null +++ b/tools/export/gcc_arm_mtm_mtconnect04S.tmpl @@ -0,0 +1,14 @@ +{% extends "gcc_arm_common.tmpl" %} + +{% block additional_variables %} +SOFTDEVICE = mbed/TARGET_MTM_MTCONNECT04S/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s130_nrf51822_1_0_0/s130_nrf51_1.0.0_softdevice.hex +{% endblock %} + +{% block additional_executables %} +SREC_CAT = srec_cat +{% endblock %} + +{% block additional_targets %} +merge: + $(SREC_CAT) $(SOFTDEVICE) -intel $(PROJECT).hex -intel -o combined.hex -intel --line-length=44 +{% endblock %} diff --git a/tools/export/gccarm.py b/tools/export/gccarm.py index 3cdb0477ff1..e0e4785dff9 100644 --- a/tools/export/gccarm.py +++ b/tools/export/gccarm.py @@ -106,6 +106,7 @@ class GccArm(Exporter): 'NRF51_DK', 'NRF51_DONGLE', 'NRF51_MICROBIT', + 'MTM_MTCONNECT04S', 'SEEED_TINY_BLE', 'DISCO_F401VC', 'DELTA_DFCM_NNN40',