From c2a1e33706d076afa20e29eb83391680f253c139 Mon Sep 17 00:00:00 2001 From: Emile Nijssen Date: Mon, 4 Mar 2024 10:09:43 +0100 Subject: [PATCH] Remove all mentions of copyright infringements --- docs/basics/compatible-controllers.md | 5 ----- docs/basics/install-binary.md | 4 ++-- docs/features/cct.md | 4 ++-- 3 files changed, 4 insertions(+), 9 deletions(-) diff --git a/docs/basics/compatible-controllers.md b/docs/basics/compatible-controllers.md index 58983d84e..af97555af 100644 --- a/docs/basics/compatible-controllers.md +++ b/docs/basics/compatible-controllers.md @@ -39,10 +39,6 @@ In the following some third-party controllers are listed. Please use a decent an ![Gold Member](../assets/images/content/akemi_gold.png)
[ABC! WLED Controller V41 / ESP32](https://shop.myhome-control.de/ABC-WLED-Controller-V41-ESP32/HW10003.1) | Commercial controller for 5V LED strips. Based on ESP32 uC. Two outputs. Option for digital microphone or [line-in-to-I2S Adapter](https://shop.myhome-control.de/Line-In-zu-I2S-Adapter-fuer-WLED-Controller/HW10013) for sound reactive WLED. Ready to use. Additional [Relay&Fuse board](https://shop.myhome-control.de/Relais-Board-fuer-WLED-Controller-5V/HW10005) available. ([German shop & shipping only within Germany or to Poland](https://shop.myhome-control.de/ABC-WLED-Controller-V41-ESP32/HW10003.1)). A similar one is available at [WLED.SHOP](https://wled.shop/produkt/wladis-wled-controller-v40-esp32/). ![Gold Member](../assets/images/content/akemi_gold.png)
[ABC! WLED Controller V43 / ESP32 based / 5V-24V](https://shop.myhome-control.de/ABC-WLED-Controller-Board-5-24V/HW10015) | Commercial controller board for 5V / 12V / 24V LED strips from creator of [LED power, wiring and fuse calculator](https://wled-calculator.github.io/). Based on ESP32 uC. Preflashed SW. Up to four outputs. Option for digital microphone or [line-in-to-I2S Adapter](https://shop.myhome-control.de/Line-In-zu-I2S-Adapter-fuer-WLED-Controller/HW10013) for sound reactive WLED. Automatic 5V/12V/24V recognition (no jumper/switch etc. required). [Ethernet adapter](https://shop.myhome-control.de/Ethernet-Adapter-fuer-WLED-Controller/HW10016) is available. Enclosure is available too. [German shop & shipping only within Germany or to Poland.](https://shop.myhome-control.de/ABC-WLED-Controller-Board-5-24V/HW10015) ![Gold Member](../assets/images/content/akemi_gold.png)
[ABC! WLED mini Controller V70 / ESP32 based / 5V-12V](https://shop.myhome-control.de/ABC-WLED-Controller-Board-mini-5V-12V-ESP32/HW10014) | Commercial controller board for 5V / 12V LED strips from creator of [LED power, wiring and fuse calculator](https://wled-calculator.github.io/). Based on ESP32 uC. Preflashed SW. Up to four outputs. Option for digital microphone or [line-in-to-I2S Adapter](https://shop.myhome-control.de/Line-In-zu-I2S-Adapter-fuer-WLED-Controller/HW10013) for sound reactive WLED. Automatic 5V/12V recognition (no jumper/switch etc. required). Enclosure is available. [German shop & shipping only within Germany or to Poland](https://shop.myhome-control.de/ABC-WLED-Controller-Board-5-24V/HW10015). -[Athom Light Strip Controller](https://www.aliexpress.com/item/1005002198527735.html) | Simple controller with enclosure for reliably driving 3 pin 5V LEDs. Uses 2M ESP8266. -[Athom LS8P ESP32 Music Controller](https://www.athom.tech/blank-1/wled-esp32-music-addressable-led-strip-controller) | ESP32 based controller with dual output, microphone and IR. Comes with WLED preinstalled -[Athom High Power Addressable LED Strip Controller](https://www.athom.tech/blank-1/wled-high-power-led-strip-controller) | Higher power options than the above system. Supports optional clock output. -[Athom RGBW Light Strip Controller](https://www.athom.tech/blank-1/wled-rgbw-light-strip-controller) | Has outputs for individual color channels. [Cadsbi Motion Smart](https://www.cadsbi-shop.de/shop/led-beleuchtungscontroller/cadsbi-motion-smart/) | Ready to use solution with 3 output ports, an external antenna, in a high quality metal enclosure ![Gold Member](../assets/images/content/akemi_gold.png)
[cod.m Wi-Fi Pixel Controller](https://shop.codm.de/automation/pixel/30/wlan-pixel-controller) | Fully completed control PCB with level shifter, terminals and case - pre-flashed with WLED! [Domestic Automation LLC](www.domestic-automation.com) | Plug in design makes it the easiest and quickest preinstalled WLED controller to setup! Modular design allows for simple plug-in addition of Motion sensors, Button control, 12V lights and more. Snap track makes for universal mounting. Includes built in fuses and power relay for safety and control. Available on Amazon [here](https://amzn.to/3XFTjpb) @@ -94,7 +90,6 @@ SP501e | ESP8285 | 8285-based 1M Controller that supports both Addressable and P | Name | Chip | Description | |---|---|---| -[Athom 15W bulb](https://www.athom.tech/blank-1/15w-color-bulb) | ESP8266 (2M flash) | 15W bulb with RGB, warm white, and cold white LEDs. Compatible with all voltages, available form factors E27, B22 and [GU10](https://www.aliexpress.com/item/1005003512212258.html) [Merkury MI-BW210-999W](https://www.walmart.com/ip/Merkury-Innovations-A21-Smart-Light-Bulb-75W-Color-LED-2-Pack/669037420) | ESP8285 | Tuya Style WiFi Led light bulb, Warm White + RGB. There are two versions of this same bulb sold in the same packaging only way to check is to look at the bulb, EBEQPW92 uses PWM led control and is compatible with WLED however EBEQPW06 uses an SM16716 chip and is not currently compatible with WLED. Managed to flash using tuya-convert and a custom WLED build with the following analog pinout: B:4, G:5, R:13, W:14. Extras disabled to allow OTA, OTA only way to flash this, programming headers are not internally available. [Shelly RGBW2](https://shelly.cloud/wifi-smart-shelly-rgbw-2/) | ESP8266 | For "analog" LED use only! Runs on 12-24VDC. One button and one input. Pins: R=12, G=15, B=14, W=4. _Finished, commercial product that can be flashed._ [More info and flashing docs](https://tasmota.github.io/docs/devices/Shelly-RGBW2/#serial-connection) diff --git a/docs/basics/install-binary.md b/docs/basics/install-binary.md index 6e56ba321..ddfb54265 100644 --- a/docs/basics/install-binary.md +++ b/docs/basics/install-binary.md @@ -90,8 +90,8 @@ I always recommend to use the latest release. Starting from WLED 0.12.0, pins ca | WLED_0.x.x_ESP32.bin | All ESP32 devices (try [this](https://github.com/Aircoookie/WLED/issues/517#issuecomment-571333712) if the WLED-AP doesn't appear after flashing) | | WLED_0.x.x_ESP32_Ethernet.bin | ESP32 devices with an Ethernet interface. Also works with WiFi only. | | WLED_0.x.x_ESP01.bin | ESP-01 (black PCB), most Sonoff devices, ESP8265, all ESP8266 with 1MB flash. This binary has the full feature set, but wireless updates will not work. | -| WLED_0.x.x_ESP02.bin | All ESP8266 with 2MB flash, Athom bulbs. This binary has the full feature set, but wireless updates will not work (for more detail see [this](https://github.com/Aircoookie/WLED/issues/3257). For wireless updates use WLED_0.x.x_ESP02.bin.gz firmware instead. | -| WLED_0.x.x_ESP02.bin.gz | All ESP8266 with 2MB flash, Athom bulbs, wireless update are possible with this firmware. | +| WLED_0.x.x_ESP02.bin | All ESP8266 with 2MB flash. This binary has the full feature set, but wireless updates will not work (for more detail see [this](https://github.com/Aircoookie/WLED/issues/3257). For wireless updates use WLED_0.x.x_ESP02.bin.gz firmware instead. | +| WLED_0.x.x_ESP02.bin.gz | All ESP8266 with 2MB flash, wireless update are possible with this firmware. | | esp32_bootloader.bin | Not a WLED release. To be flashed to a brand new ESP32 before flashing the WLED binary itself. | Legacy binary format (up to 0.11.1) diff --git a/docs/features/cct.md b/docs/features/cct.md index 4872106c8..89aca5824 100644 --- a/docs/features/cct.md +++ b/docs/features/cct.md @@ -51,7 +51,7 @@ Setting this to 100% results in the highest peak brightness output at the neutra ![](/assets/images/content/wledcct.png) !!! warning - Make sure your setup can handle driving both white channels at maximum output simultaneously. This results in a higher heat output and might reduce the lifetime of your LEDs. For example, bulbs by Athom are designed for linear blending (0%) and may be damaged by attempting to use additive blending. + Make sure your setup can handle driving both white channels at maximum output simultaneously. This results in a higher heat output and might reduce the lifetime of your LEDs. You can limit the maximum allowed additive blending at build time using the `WLED_MAX_CCT_BLEND` macro. For example, add `-D WLED_MAX_CCT_BLEND=0` to your build flags to force linear blending only. @@ -59,7 +59,7 @@ For example, add `-D WLED_MAX_CCT_BLEND=0` to your build flags to force linear b #### IC CCT By default, PWM CCT bus types set the value of the warm and cold white channels. -If your hardware uses an IC that controls the color temperature based on one PWM signal and the overall brightness on the other, please use the build flag `-D WLED_USE_IC_CCT` in a custom compilation. (the 15W bulb by Athom uses this method) +If your hardware uses an IC that controls the color temperature based on one PWM signal and the overall brightness on the other, please use the build flag `-D WLED_USE_IC_CCT` in a custom compilation. #### CCT in the JSON API