rposConfig.sample-usbcam.json

{
  "NetworkAdapters" : ["awdl0","eth0", "wlan0", "en0"], 
  "IpAddress" : "192.168.1.15",
  "ServicePort" : 8081,
  "Username" : "",
  "Password" : "",
  "CameraType" : "usbcam",
  "CameraDevice" : "/dev/video0",
  "RTSPAddress" : "", "//":"Normally left blank. Used to set RTSP Server Address",
  "RTSPPort" : 8554,
  "RTSPName" : "h264",
  "MulticastEnabled"  : false, "MulticastEnabledComment" : "## Multicast is not supported for USB camera",
  "RTSPMulticastName" : "h264m",
  "MulticastAddress"  : "224.0.0.1",
  "MulticastPort"     : "10001",
  "RTSPServer" : 3, "RtspServerComment" : "## Select RTSP Server > 1:RPOS RTSP Server 2:V4L2 RTSP Server by mpromonet (auto selected if MulticastEnabled=true)",
  "PTZDriver" : "none", "PTZDriverComment": "## valid values are none,tenx,pelcod,visca and pan-tilt-hat",
  "PTZOutput" : "none", "PTZOutputComment": "## values are none (eg Tenx), serial and tcp",
  "PTZSerialPort" : "/dev/ttyUSB0",
  "PTZSerialPortSettings" : { "baudRate":2400, "dataBits":8, "parity":"none", "stopBits":1 },
  "PTZOutputURL": "127.0.0.1:9999",
  "PTZCameraAddress": 1,
  "DeviceInformation" : {
    "Manufacturer" : "Raspberry Pi",
    "Model" : "2 B",
    "HardwareId" : ""
  },
  "logLevel" : 3, "logLevelComment": "## LogLevels are > 1:Error 2:Warning 3:Info 4:Debug",
  "logSoapCalls" : false
}