Skip to content

Latest commit

 

History

History
393 lines (289 loc) · 25.5 KB

README.md

File metadata and controls

393 lines (289 loc) · 25.5 KB
Raw

somo-rl

Reinforcement learning for continuum manipulators in SoMo / PyBullet

README TODOs:

  1. Instructions for configuring experiments directory
  2. Postprocessing example code

SoMo-RL is an open-source toolkit for developing and evaluating control policies for soft robots. Using the SoMo simulation framework and SoMoGym library, SoMo-RL permits experiments on, e.g., the effects of varying control and robot design parameters, and enables the use of RL for such systems. SoMo-RL builds off the functionality of SoMoGym, providing a straightforward system for training RL policies on SoMoGym environments, managing experiments at scale, and analyzing RL results. In SoMo-RL, experiments are highly customizable, allowing for complete modification of learning hyperparameters and environment parameters through a single configuration file.

project_outline

Requirements

  • Ubuntu 20.04
  • Python 3.6+

TODO: specify which versions of python work / dont work. i had problems with python 3.8 and/or 3.9 I think (because of pybullet)

  • if python3.8 or 3.9 doesnt work: install python3.7; make sure to also install the venv for python3.7: apt-get install python3.7-dev python3.7-ven

Setup

  1. clone this repo: git clone https://github.com/t7mccarthy/somo-rl.git
  2. upgrade pip: python -m pip install --upgrade pip or pip install -U pip --upgrade
  3. create a dedicated virtual environment: python -m venv /path_to_new_venv
  4. activate the environment: source /path_to_new_venv/bin/activate
  5. from within your local repo, install the requirements: pip install -r requirements.txt

If you want to run SoMo-RL on a research computing cluster, check out the rc_cluster/ directory and additional documentation.

Configuring Experiments Directory:

Throughout the framework, RL trials are divided into a three-layer hierarchy, which corresponds to the directory structure of experimental data and results. In order to run experiments, you need to have an experiments directory. When setting up this repo, make a new directory called something like somo-rl_experiments/. This will store experiments, run groups, and runs.

Each RL training run, where one training run learns one policy, is defined as a run. Each run is a member of a run group, which is further a member of an experiment. A single experiment is usually constructed to investigate a single point of comparison; run groups are usually distinguished along that point of comparison (e.g., varying RL algorithm), and runs are usually distinguished by random seed. In a run, the combination of experiment name, run group name, and run name is defined as the run ID.

Unit Testing

SoMoGym uses pytest for testing, and it is helpful to run them after installing to ensure your codebase is configured correctly. In most cases, it will be better to ignore the tests that rely on the GUI -test coverage will be identical. You can run all tests with $ pytest from the repository's root and ignore the tests involving the GUI with $ pytest -m "not gui". Run pytest from the repo root.

Note: If you want to skip straight to technical codebase and usage details and skip the system overview, scroll down a lot until you get to Codebase Structure [TODO: link].

Background

system_overview

Reinforcement Learning

At the most fundamental level, RL consists of an agent interacting with an environment and (potentially) receiving a reward in response to its action. The agent then learns from this reward response, with the goal of maximizing the total reward collected. The reward function, which defines the goal of a task, outputs a reward value according to the state's desirability. The agent generates a policy that maps its observed state to an action, which commands the control inputs of the environment to change. In deep RL setups, the agent is at least one neural network which is trained to maximize the resulting reward. Defining a policy rollout as the execution of a policy on an environment, we consider an RL agent successful when its trained policy consistently succeeds on rollouts.

SoMo

SoMoGym and SoMo-RL use SoMo, a thin wrapper around PyBullet, which was designed for the simulation of soft/rigid hybrid systems. It facilitates the simulation of continuum manipulators by approximating them through rigid-link systems with spring-loaded joints and has been shown to accurately capture soft manipulator behavior. It is well-suited as the underlying engine for an RL benchmarking suite for soft/rigid hybrid tasks for two reasons: (i) its high-level interface enables the construction of varied environments that contain soft robots and other objects with complex contact interactions, and (ii) its rigid-link approximations make it fast---a crucial feature given the large amounts of data required in state-of-the-art RL algorithms.

Manipulators in SoMo are comprised of one or more actuators in series, which have either one or two bending axes commanded by torque control inputs. Input torques are applied to each discrete joint in the simulated actuator. In actuators with two actively controlled bending axes, applied joint torques alternate between controlled axes along the length of the actuator. Multiple manipulators can be present in a single SoMo environment, allowing for the possibility of hand-like systems and other complex manipulator assemblies. Rigid components (e.g., rigid palms and objects to manipulate) can also be added to SoMo environments to form soft/rigid hybrid systems. Furthermore, SoMo's accuracy and feature set let its simulation results transfer to physical systems with high fidelity, which ensures the utility of policies generated by SoMoGym and SoMo-RL when applied in the physical world.

SoMoGym

SoMoGym provides a modular and straightforward way to define complex environments as control tasks for soft robots, allowing for easy evaluation of control policies and learning frameworks. It contains a set of predefined environments with pre-specified settings for use as a policy benchmarking suite. The gym, built in Python3, consists of environments that inherit from the environment (or `Env') class in OpenAI Gym. The format of OpenAI Gym environments is a standard for defining RL tasks, making SoMoGym's structure easy to understand within the RL community. During initialization, a SoMoGym environment defaults to its provided benchmark run configuration. To initialize a SoMoGym environment with custom settings, a run configuration dictionary can be provided with custom general simulation parameters (PyBullet time step, controller update rate, maximum torque for each actuator, etc.) and task-specific parameters (reward components and weights, observation components, object properties, etc.). SoMoGym also provides a variety of observation and reward functions, which can be selected, combined, or modified easily. Internally, SoMoGym relies on the SoMo framework to represent and control soft robots. As such, each continuum robot is described in a human-readable configuration file, making it easy to vary the number, positions, and properties of robots as well as other objects in each SoMoGym environment.

SoMo-Gym Relevant Details

Manipulator Control and Action Spaces

Actuators in SoMoGym are controlled via torque control, emulating standard physical soft actuators. In SoMoGym, the action space usually represents normalized absolute torque for each DOF of each actuator. Each dimension of each environment’s action space can take on a value from (-1) to (1), and we map from action values to actuator torques using a max_torque_multiplier constant (provided in the run configuration). The value of max_torque_multiplier can be specified along with manipulator physical characteristics to reflect the dynamics and capabilities of a physical system.

In controlling robots in SoMoGym manipulators, we consider two distinct time step durations: action time and simulation time (defined in a run configuration as action_time and bullet_time). Simulation time represents how often the PyBullet simulation is updated; action time represents how often a new policy input is applied and is the inverse of the controller update rate. The simulation time has to be small enough to avoid numerical instabilities; the magnitude of action time determines the precision over time a policy can exhibit and depends on the update rate of the real-world controller. However, as the physics simulation of an environment runs faster with a larger simulation time, maximizing simulation time has a big impact on the real-world time required for training an RL policy (which especially matters in complex environments). We found that a simulation time of 0.4 ms works well across all of our examples, though this can be increased on a case-by-case basis depending on environment complexity. Generally, more complex environments require a smaller simulation time to maintain numerical stability.

The action time should be small enough such that there is a high degree of control over manipulator trajectories, but large enough to make each action meaningful. As detailed in the following paragraph, instantaneous jumps in applied torque are not supported in SoMoGym, so the significance of each individual action on actuator trajectory decreases as action time decreases. Additionally, increasing action time decreases computational cost per unit of time in simulation. We found that an action time of 10 ms provided sufficient granularity for each action step across all of our environments.

Instantaneously applying a new actuator torque that is significantly different from the current torque is (i) commonly not possible in physical systems, and (ii) can lead to numerical instability in simulated systems. In order to achieve stable and smooth motion as actions are applied, we limit the change in torque per simulation step. This also helps us achieve realistic system behavior; hardware systems have actuation rate limits (e.g., caused by fluidic resistance/capacitance in fluidic actuators). The torque rate limit is defined in the run configuration field max_torque_rate. This creates a gradual change in applied torque between simulation steps, ramping the applied torque linearly according to max_torque_rate over an action step until the commanded torque is achieved or the next torque command is issued.

Defining Observations, Reward, and Success

SoMoGym implements a set of state observation options, a set of reward component options, and a success metric for each environment. Observations are chosen based on what may be available on a hardware system or useful in evaluating the impact of providing more complete state information to an agent. Run configurations define which observation options to use during training as the observation function. This allows for easy comparison of the performance of different observation spaces, helping us pursue useful questions like optimal sensor placement. For continuum manipulators in our environments, we commonly provide the following observation options:

  1. Backbone positions: position vectors of evenly spaced points along the center of a manipulator in the world coordinate frame. The maximum number of observable backbone positions is the number of links used to model the manipulator in SoMo. If (n) backbone positions are requested by a SoMoGym observation function (where (n < #\ links)), the positions of evenly spaced links along the manipulator will be returned. If (n=1) backbone position is requested, the position of the most distal link will be returned. This could be collected in a physical system via (n) inertial measurement units (IMUs).

  2. Link velocities: velocity vectors of each link in the manipulator in the world coordinate frame. Like backbone positions, the maximum number of link velocities that can be observed is the number of links used to model the manipulator in SoMo. If (n) link velocities are requested by a SoMoGym observation function (where (n < #\ links)), the positions of evenly spaced links along the manipulator will be returned. If (n=1) link velocity is requested, the velocity of the most distal link will be returned. This could be collected in a physical system via (n) IMUs.

  3. Applied actuator torque inputs: torques applied to the actuators of the manipulator. As the action space does not map directly to torque space, it is useful to observe the actual inputs applied to the system. In physical fluidic actuation systems, applied actuator torques is a known quantity.

If an external object is involved, we commonly provide the following observation options:

  1. Object position: the position vector of the object in the world coordinate frame.

  2. Object orientation: the quaternion representation or Euler angle vector of the object’s orientation in the world coordinate frame.

  3. Object velocity: the velocity vector of the object in the world coordinate frame.

  4. Manipulator distance vector: the distance vector from the center of the object to the nearest point on the manipulator.

  5. Tip distance vector: the distance vector from the center of the object to the tip of the manipulator.

Similar to observations, the implementations of rewards and success metrics are chosen based on availability of information, but are entirely task dependent. Like observation functions, reward functions are broken down into components selectable by run configurations. The run configuration specifies the weight of each of these components in the cumulative scalar reward during each action step. This structure allows for the convenient comparison of different reward functions, and makes it easy to evaluate the performance of policies along common axes in the case that reward functions vary across an experiment. Success metrics are binary representations of the performance of a policy rollout, measured at the end of the rollout episode. A rollout is considered successful if its final state is within a certain threshold on some axes (e.g., an object is within 1 cm of a target position).

SoMo-RL High-Level Overview

The SoMo-RL framework provides associated RL functionality to SoMoGym environments, enabling a simple way of running, tracking, and postprocessing RL experiments in SoMoGym environments with highly configurable settings. SoMo-RL uses implementations of RL algorithms from Stable Baselines3, a toolset that allows for easy use of popular RL algorithms. Given a run configuration file, SoMo-RL sets up experimental runs, instantiates SoMoGym environments, and executes training using Stable Baselines3. SoMo-RL further handles rollouts of trained policies, analysis of policy performance, and visualizations of training status over time.

General Usage

SoMo-RL is divided into two main components: training and postprocessing. Experimental data and results are stored outside of SoMo-RL, though the path to a user's experiments directory is stored in the SoMo-RL user settings file. The training component includes functionality for training RL policies on SoMoGym benchmark environments and on custom environment settings. To start a training run, specify the experiment name, run group name, and run name, in addition to any optional parameters. Optional parameters include a flag to render the environment and an argument to display live-updating environment information in a configurable debugging GUI that can show observation space values, reward component values, applied torque values, and action values. On starting a training run, a run's run directory is set up with directories for models, monitoring, results, and callbacks. Depending on how RL settings are configured in the run configuration, data generated by a training run is stored in these directories as it is executed. As training runs often run over the course of days, a training run can be cancelled at any point in its duration and the training data and trained policy will remain available.

somo-rl_dashboard

Run Configurations

Run Configurations define SoMoGym environment settings and RL settings for training. Each pre-built environment has its own standard run configuration (saved as a .yaml file), which defines the default setting of the environment. These default settings are used in the SoMoGym benchmark. Environment related settings vary from environment to environment, but generally include:

  • Action time: time step over which a single action is applied to the system.

  • Bullet time: amount of time between updates to the PyBullet physics engine running the simulation.

  • Environment id: name and version of the SoMoGym environent to run.

  • Torque multiplier: value to multiply the normalized action space by in order to map from the action space to the torque space. This can be a scalar value or a vector depending on the torque limits of each actuator.

  • Maximum torque rate: maximum change in torque per simulation step.

  • Observation flags: list of which state components to include in the observation function. For observation components that are composed of more than one sample (e.g., positions along manipulator backbone), the number of samples is also specified. This number of samples corresponds to, for example, the number of a certain type of sensor placed along each manipulator.

  • Reward flags: list of which reward components to include in the reward function, along with the weight of each component.

We augment these run configurations when executing RL control policies. RL settings usually include:

  • Random seed: the seed used in all pseudorandom number generators across a run’s RL functionality and instantiated SoMoGym environment. As RL is sample inefficient and conducting a large number of trials in each experiment is computationally intensive, it is often only feasible to execute a particular setting on a few random seeds. As such, using the same set of random seeds across settings in a given experiment is important in understanding differences in performance.

  • Algorithm: RL algorithm to train with; all implementations from Stable Baselines(3) (A(2)C, DDPG, DQN, HER, PPO, SAC, TD(3)) are supported by default, but any other algorithm that follows the Stable Baselines(3) model interface can be used easily.

  • Policy: RL policy network to train; the Stable Baselines(3) default policy networks for each algorithm are supported by default, but any policy network that follows the Stable Baselines(3) policy network interface and works with the selected RL algorithm can be used.

  • Algorithm settings: a dictionary holding optional hyperparameters to use as input during algorithm instantiation. This can include learning rate, entropy coefficient, buffer size, etc.

  • Policy network settings: a dictionary holding optional policy network hyperparameters. This can include network architecture and activation function.

  • Training timesteps: number of action steps to take during the training run, cumulative over all episodes.

  • Maximum steps per episode: maximum number of action steps per episode. If stopping conditions are in place for the particular environment, an episode can be shorter than this value.

  • Callback settings: parameters defining how often to save and evaluate the policy during training.

Codebase Structure

The SoMo-RL repo contains all scripts for training and analyzing policies. The SomoGym repo contains the gym environment for running each task, as well as benchmark settings for each.

Note: A run is defined as a single training trial to develop a single policy. A run group is defined as a related collection of runs. An experiment is defined as a collection of run groups. This distinction is important to the structure of the somo-baseline-results repo, and to the running of scripts within this repo.

Main Scripts

Users interact with two main scripts to train RL policies:

  1. train_policy.py: executes a training run based on a given run config. First, directories to save run data are created in the run's directory. A SomoGym environment is instantiated according to the run's config, and a Stable Baselines training run is established. Logging occurs throughout training, and callback models are save periodically according to the run config.

  2. train_benchmark_policy.py: executes a trainig run using benchmark config parameters for the SoMoGymym environment. RL paramters are still specified in a provided run config.

  3. postprocessing/process_experiment_reward.py: handles postprocessing of policies and training run performance. It calls functions defined in the postprocessing/utils/ directory, which contain functionality to plot reward curves, test out policies, and visualize policy performance. The file currently does not have well defined options, so see the Basic Usage section below for some sample script lines.

The postprocessing/ directory contains three modules for evaluating training and policy performance:

  1. run_policy.py: runs a trained policy on an environment, recording performance and state data at each step. There are a lot of command line args for running this as a script.
  2. process_run_reward.py: parses the monitoring output of a given run, loading the data into a pandas dataframe. There is also basic plotting functionality.
  3. process_experiment_reward.py: processes the monitoring output of all runs in an experiment, or of a selected set of runs in an experment. This data is compiled into a pandas dataframe, and used in comparison plots.

Basic Usage

Setting up a Training Run

To set up a training run, you need to create a run folder in the experiments directory and write a run config file.

  1. In your experiments directory, make a new directory for a new experiment. Here, we'll refer to that new directory as test_exp/.

  2. In text_exp/, make a new directory for a new run group. We'll refer to this as setup_0/.

  3. In text_ep/setup_0/. make a new directory for a new run, which we'll refer to as random_seed_0/.

  4. Make a new file in text_ep/setup_0/random_seed_0/ called run_config.yaml. This is your run config file.

  5. Enter your desired settings into the run config. It probably will look something like this:

action_time: 0.01
alg: PPO
bullet_time_step: 0.0002
checkpoint_cb:
  save_freq: 10000
env_id: InHandManipulation-v0
eval_cb:
  eval_freq: 50000
  n_eval_episodes: 1
failure_penalty_multiplier: 100
max_episode_steps: 1000
max_torque_rate: 130
num_threads: 4
observation_flags:
  box_or: null
  box_pos: null
  torques: null
policy: PPOMlpPolicy
reward_flags:
  position: -5
  z_rotation: 10
seed: 0
torque_multiplier: 65
training_timesteps: 10000000

Now your new training run is set up!

Executing a Training Run

Note: currently, the SoMo-RL repo and SomoGym repo must be located in the same directory on your machine.

  1. Make a file user_settings.py in the base directory of this repo. Define the absolute path to your experiments directory as EXPERIMENT_ABS_PATH.

  2. Prepare a run (and a run config) in your experiments directory (the same one your EXPERIMENT_ABS_PATH goes to).

  3. There are several command line arguments used in actually executing a run:

    • exp_name (-e): required, name of experiment in your experiments directory.
    • run_group_name (-g): required, name of run group within experiment.
    • run_name (-r): required, name of run within run group.
    • render (-v): optional, if present, show pybullet rendering while running training. This should only be used for debugging as it will slow down training significantly.
    • debug (-d): optional, if present, show debugging dashboard with all debugger components.
    • debug_list (-dl): optional, list (space separated) of debugger components to show (choose from reward_components, observations, actions, applied_torques). If present, show debugging dashboard with only these selected debugger components.
    • overwrite (-o): optional, allow overwrite of old data if the training run has prevously been started.
    • note: optional, notes on training run.

  4. To run, simply execute train_policy.py or train_benchmark_policy.py followed by command line arguments in the terminal. Most runs will look something like:

    (venv) somo-rl tom$ python train_policy.py -e test_experiment -g test_group -r test_run

    or for debugging, something like:

    (venv) somo-rl tom$ python train_policy.py -e test_experiment -g test_group -r test_run -v -dl reward_components observations -o

Again, the difference between train_policy.py and train_benchmark_policy.py is that train_benchmark_policy.py will overwrite environment settings in your run_config with those found in the benchmark_run_config.yaml file in the SomoGym environment directory.

Running a trained policy: TODO

After you've started training and have the final policy file (or a callback policy file), you can easily run a rollout of it in simulation to get a sense of its performance. This is done with run_policy.py, which has a number of command line args.

Postprocessing training data: TODO 😞

Run process_run_reward.py or process_experiment_reward.py

summary_diagram

Copyright 2022 Thomas P. McCarthy and Moritz A. Graule, Harvard John A. Paulsen School of Engineering and Applied Sciences. All Rights Reserved.