Skip to content

Latest commit

 

History

History
93 lines (56 loc) · 2.03 KB

RASPBERRY.md

File metadata and controls

93 lines (56 loc) · 2.03 KB
Raw

Configuring Raspberry Pi

OS Installation

  1. Download Raspbian OS from here https://www.raspberrypi.org/downloads/raspbian/
  2. Burn SD card using downloaded image above using Balena Etcher which can be downloaded from https://www.balena.io/etcher
  3. Put the card into Raspbery device, and turn it on. Follow the instructions, and respect naming convention defined here.
  4. Make sure you select 5G WiFi during the OS installation

Post OS Installation Steps

Open "Rasberry PI Configuration" screen

System tab:

  • Hostname - Enter a new name according to Naming Conventions

  • Auto-Login - Disable option

  • Boot - To CLI

  • Network at Boot - Wait for network

Interfaces tab:

  • Set SSH to enabled

Modifying The Hosts File

sudo nano /etc/hosts

Add the following entry:

192.168.0.xxx	sports-replay-ai-Y

Where:

  • xxx us defined in router setup explained below
  • Y is the ID defined during Jetson Nano device setup.

At this point, we need to run sudo reboot to apply the host name changes.

Preventing SSH timeout on Raspberry

Read instructions here.

Performing OS Upgrade

sudo apt-get update

sudo apt update

sudo apt-get upgrade

Installing The FTP Server on Raspberry PI

sudo apt-get update

sudo apt-get install vsftpd

sudo nano /etc/vsftpd.conf

Add, uncomment, or amend lines in the config file:

Amend

anonymous_enable=NO
local_enable=YES
write_enable=YES
local_umask=022
chroot_local_user=YES

Add

user_sub_token=$USER
local_root=/home/$USER/FTP

Creating FTP directory, and Restarting FTP service

mkdir /home/pi/FTP

sudo service vsftpd restart

Setting up The Tunneling

Full instructions can be found in Setting up the Tunneling section.

The Prerequisites for The Player

sudo apt-get update && sudo apt-get install -y libdbus-1{,-dev}

pip3 install omxplayer-wrapper

Enabling HDMI1 port

sudo nano /boot/config.txt

Enable the following flags

hdmi_force_hotplug=1
hdmi_drive=2