v1.10

1. Flush time is reduced to 0.5 s, which increases performance;
2. Running average per-ASIC BFGMiner counters show correct values;
3. Configurable number of attempts for io-pwr board initialization.

v1.05

1. Submit shares during flash procedure;
2. Upper frequency limit is 325 MHz;
3. Ability to switch off offending dies.

v1.04

Two major improvements:
  1) bfgminer is not restarted on die failure; instead,
     die is reconfigured individually
  2) Flush time reduced to 4 secs thanks to batched SPI transfers

v1.03

Short changelog:

1. Improved Advanced page stability;
2. Shut down DC/DCs before reboot/shutdown of RPi, so that would not go into faulty state after reboot.
3. Upgrade BFGminer to 4.8.0

Note: there is no full SD-card image for this release. Use titan-upgrade-1.03.bin to upgrade previous release (v1.02) via web interface.

v1.02

Titan 1.02 release fixing I²C issues that caused frequent reboots and performance improvements on block flushes.

v1.01-1

Addendum to 1.01 release to track the linux kernel sources used in the release.

Titan release 1.01

Initial release of Titan miner software.