Encoder counts only up – debounce cap was missing

[Barabba11]

Hi, I don't know what is wrong there, if I disconnect one of the 2 inputs I have no events (right), but If I invert them or change rotation it always increase. ON one direction it only increase, in the other if I go really slow it decrease by 1, but suddenly increase by one
Which parameter should I change? Thanks

I have ESP8266 and a classic mechanical encoder, I'm using D5 and D6

[LennartHennigs]

Hey,
that is kind of hard to tell from afar.
Encoders can have different steps per click values, try setting a different steps_per_click value:

ESPRotary(byte pin1, byte pin2, byte steps_per_click = 1, int lower_bound = INT16_MIN, int upper_bound = INT16_MAX, int inital_pos = 0, int increment = 1);

Or, it might be faulty.

[Barabba11]

Mate, thank you for your kind help, the reason was the bounces of encoder, connecting condensers 0,1uF solved it. I strongly suggest you to write it on your notes, they sell modules without them so it can happen often that people getting errors
https://github.com/enjoyneering/RotaryEncoder/raw/master/images/rotary_encoder_shematic.png