Skip to content

Latest commit

 

History

History
154 lines (119 loc) · 6.42 KB

building-xfstests.md

File metadata and controls

154 lines (119 loc) · 6.42 KB

Building xfstests

The xfstests-bld package makes it easy to build xfstests in a hermetic build environment (so it is not dependent on possibly out-of-date distro versions of libaio, xfsprogs, etc.). This was the original raison d'etre for xfstests-bld, which explains why it was so named.

Fetching the external git trees

The xfstests-bld package depends on a number of external git trees:

  • xfstests-dev
  • xfsprogs-dev
  • fio
  • quota
  • fsverity
  • ima-evm-utils

The first time you run "make", the build system will clone these repositories by running ./get-all. Their remote URLs are set in the file fstests-bld/config file. If you wish to make changes, copy "config" to "config.custom" and make changes there.

The config file can also specify the commit to use for each repository. If a commit is specified, the build system will check it out after cloning the repository. The commit will also be checked out each time a new build is done, in case the config file was changed to specify a different commit. Note that this will override any local changes. If, on the other hand, no commit is specified, then the repository will simply start out at the latest "master", and you will be free to make local changes or update it with "git pull" as desired.

(Please take care before updating the fio repository; some updates to the fio tree have caused test regressions in the past, so it may be preferable to let things be as far as the fio repo is concerned.)

The build also supports some optional repositories which are only included when their URLs are uncommented in the config file; see the config file for a full list.

Choosing a build type

xfstests-bld can be used to build xfstests and its dependencies for one of the official "test appliances" (kvm-xfstests, gce-xfstests, android-xfstests, etc.), then optionally build the test appliance itself. This normally requires using a Debian build chroot. Alternatively, xfstests-bld can be used to build xfstests and its dependencies for a different environment, such as for the native system, without using a build chroot.

Preparing a build chroot

To build xfstests and its dependencies for one of the official test appliances, it is strongly recommended to use a Debian build chroot. Using a build chroot ensures that an appropriate compiler toolchain is used and that the binaries are linked to the appropriate shared libraries. In addition, using QEMU user-mode emulation it is possible to create a chroot for a foreign architecture, making it easy to do cross-architecture builds.

To set up a Debian build chroot, run the setup-buildchroot script. setup-buildchroot will invoke debootstrap to bootstrap a minimal Debian system into a directory (by default a subdirectory of /chroots/), then set it up for use with schroot and install into it all the Debian packages needed for the build. setup-buildchroot must be run as root, since it needs root permission to run debootstrap and update /etc/schroot/schroot.conf.

setup-buildchroot supports setting up a chroot using any architecture supported by Debian. For kvm-xfstests appliances, you'll need either an i386 or amd64 chroot:

$ sudo ./setup-buildchroot --arch=i386
$ sudo ./setup-buildchroot --arch=amd64

For gce-xfstests test appliances, you'll need an amd64 chroot:

$ sudo ./setup-buildchroot --arch=amd64

For android-xfstests test appliances, you'll need an armhf or arm64 chroot:

$ sudo ./setup-buildchroot --arch=armhf
$ sudo ./setup-buildchroot --arch=arm64

Normally ARM will be a foreign architecture, so setup-buildchroot will walk you through installing the needed QEMU binary and binfmt_misc support to get QEMU user-mode emulation working. Afterwards, it will behave just like a native chroot.

Once you're created a chroot, you should be able to use the schroot program to enter it, e.g.:

$ schroot -c bullseye-amd64         # enter chroot as regular user
$ schroot -c bullseye-amd64 -u root # enter chroot as root

The -c option must specify the name of the chroot as listed in /etc/schroot/schroot.conf. By default setup-buildchroot names the chroots after the Debian release and architecture.

Without a build chroot

If you want to use xfstests-bld without a dedicated build chroot, a number of prerequisite packages are needed. They can be installed using the following command:

$ sudo apt-get install autoconf autoconf2.64 \
	automake autopoint bison build-essential ca-certificates \
	debootstrap e2fslibs-dev ed fakechroot flex gettext git \
	golang-1.11-go libblkid-dev libdbus-1-3 libgdbm-dev \
	libicu-dev libkeyutils-dev libsqlite3-dev libssl-dev \
	libsystemd-dev libtool-bin liburcu-dev lsb-release \
	meson pkg-config python3-setuptools rsync symlinks \
	qemu-utils uuid-dev zlib1g-dev

It is also possible to use a cross compiler rather than the native compiler. To do this, set the shell variables CROSS_COMPILE and optionally TOOLCHAIN_DIR in your config.custom file as follows:

  • CROSS_COMPILE should be set to the target triplet. For example, on a Debian system, you can install the gcc-arm-linux-gnueabihf package and then set CROSS_COMPILE=arm-linux-gnueabihf to cross compile for the Debian armhf platform.

  • TOOLCHAIN_DIR can be set to the directory containing the cross-compiler toolchain, if it is not already on your $PATH. It should specify the directory one level above the bin directory containing the compiler executable file.

Building the xfstests tarball

You may skip explicitly building the xfstests tarball if you are using the build-appliance script to build a test appliance, as described in building-rootfs. Otherwise, you can build the tarball as follows:

$BUILD_ENV make clean
$BUILD_ENV make
$BUILD_ENV make tarball

... where BUILD_ENV should be set to "schroot -c $CHROOT_NAME --" for a chroot build environment (where $CHROOT_NAME should be replaced with the name of the chroot as listed in /etc/schroot/schroot.conf) or an empty string otherwise.

Briefly, these make targets do the following tasks:

  • make clean cleans the various components.
  • make (or equivalently make all) builds the various subcomponents and installs them into the bld directory.
  • make tarball copies the files actually needed to run xfstests into the xfstests scratch directory, then creates xfstests.tar.gz by running the gen-tarball script.