S8 Stock 2.0.7.2(bugfix)

Update to Marlin v2.0.7.2

No significant updates to S8 configuration.

Mostly prep for future releases for BL touch and SKR boards

Two versions available in zip files below, one with stock 4 point mesh and one with 16 point mesh.

S8 Stock 2.0.5.4

Update to Marlin v2.0.5.4

• Increased Max Bed Temp to 115. Note, the bed heater/power supply is under-powered for this kind of temperature and will likely result in a heater failure alarm. Personal tests indicate it can reach approx. 95

• Enabled print statistics.

• Improved behaviour on Stop print, now presents the bed.

Two versions available in zip files below, one with 4 point mesh and one with 16 point mesh.

S8 Stock 2.0.5.3

Changes from beta 3:

• Enabled advanced pause and configured filament loading/unloading
• Enable host action commands (notifications in OctoPrint)
• Fix filament runout sensor

Download S8_Stock_2.0.5.3 below:

S8 Stock 2.0.5.3 beta3

Changes from beta 2:

• Increase homing speed on first bump.
• Enable quick home (X and Y home simultaneously)

Download S8_Stock_2.0.5.3_b3.zip below.

S8 Stock 2.0.5.3 beta2

Changes from beta 1:

• Enabled Firmware Retraction. Good for tuning, retraction can be adjusted mid print. Firmware retraction in Prusa Slicer can be found in Print Settings -> General -> Advanced section. In Cura the Printer Settings plugin is required.
• Enabled G26 Mesh Validation.
• Adjustment to Mesh Bed Levelling points. Closer to adjustment screws.
• Enabled part cooling fan kickstart and set min fan PWM.
• Enabled Babystepping. Double click during print to access. Double click when not printing gives quick access to Move Z menu
• Enabled M486 Cancel Objects.

Download S8_Stock_2.0.5.3_b2.zip below.

S8 Stock 2.0.5.3 beta1

Initial Marlin V2 build for stock board and setup.

Changes from V1:

• Various LCD Updates
• Implement thermal runaway protections

Download S8_Stock_2.0.5.3_b1.zip below.