diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index f82e50bc2df..d273f2c570f 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index d8e1c4c87c7..fe06bcc6c05 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 634f051f57c..8d1d03af899 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index a7a69f04996..4742a9bbf3d 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 80583e219e5..bc541d4efe3 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -3006,28 +3006,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3035,9 +3035,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 5df7b8226f5..ce15a102d31 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index f42fee87707..2f7bde138be 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 30975815a11..2d42c5e09ad 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 30975815a11..2d42c5e09ad 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index d9f0afd1f25..d87d71ce786 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index ea9f230310a..03ced34308b 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index d02076bf861..0e7b6934d53 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index a94d22502b6..585ef8abbb8 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 1d8762457b6..0263e90faeb 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 7f696d01f17..b343b6e8652 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index b80b7b3a0a2..5428036db75 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 2604feafd24..55541ae88eb 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 2604feafd24..55541ae88eb 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index f70ca27a54e..6d4ceef8516 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index f70ca27a54e..6d4ceef8516 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index a24d1a8fe8f..c2a45138d99 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index a24d1a8fe8f..c2a45138d99 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index a24d1a8fe8f..c2a45138d99 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 1dd217092c7..31f71db2455 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 748686ecc51..0fcf54fd545 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 3ec855b95d6..4e3d925e98d 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index b73750de6e9..3830acb9699 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index d160c60139c..820245d8c4c 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index ea56ec2c45e..68bf97210cb 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 5b89a63fccf..1ce4d312982 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 8190b76cda7..107fc7c546e 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index b676782a707..f210c44f8e2 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -3001,28 +3001,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3030,9 +3030,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 2fe4571c04c..d478930b93f 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 3d69ffcf7fb..d9a48ca43cf 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 74e2285472f..672a4306bcc 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 71fcab256b6..39d7e59d4cf 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index d41fc07951b..d53c0d64b4d 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 74e2285472f..672a4306bcc 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 16c0129b7e4..1bd42cdd22e 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 0a1acb0fab1..3e0416f11b9 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 035a3bf4248..54b44bf2d46 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -2993,28 +2993,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3022,9 +3022,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index c7cbefdec5d..06a020e78bd 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index 43bb24c0438..873005e7c47 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 2acd2f9750e..fa71f61ba69 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index d7cd47aa9ca..c9d225327ae 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index abb7dd8495f..510c74db02f 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index f47b5f910bb..4815458c9ca 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index b43fae135db..c0a50dd06f8 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 2a5c4eece88..16113838548 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -3004,28 +3004,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3033,9 +3033,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index b43fae135db..c0a50dd06f8 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 1701eff8542..e2df02d01a1 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index a2101ff46b7..9237ee2e89b 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 723ff90cb27..0ef25680a43 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 01ae08ead83..4558d66be44 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 585c636a3b3..d521ad9b4ac 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 35bb727f271..99acb5670d1 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index cb1823a60bb..eb52ccd35d3 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 2291e7d9fa3..ee4adc79b58 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index f4fb2c2ebeb..30cfd7cfc90 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index cb1823a60bb..eb52ccd35d3 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 60a2f40c6df..69d776e90bf 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 57301e62df3..1c09657ec38 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -3001,28 +3001,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3030,9 +3030,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index d138ee3465b..7155d6fcbda 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -3003,28 +3003,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3032,9 +3032,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 3db7eb37bd3..d0e8116b325 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index fe221c566f8..a52772c44a8 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 56f1c9af695..bda568ae125 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index e72a3c20ec4..c5d638a5a90 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 297e6773fa9..6bd42607dd9 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index 6f219fec165..2417778abd6 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 41268a523b5..dee66934f71 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index cab2618e517..5d9c92a5e13 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index 74d327df385..96219beba2e 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index 74d327df385..96219beba2e 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index eb5ec2de18c..5c311b09cf2 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index cb3fe7f3737..61cef69d22a 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 6208b571a05..4da5a59cb85 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 137518cfdd7..f590260c07a 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index e1bc0e4a75b..ad732840976 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index b9c2e17fa6f..226751ab426 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index 63c78544da2..99c97df365d 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 7d30170a6d0..bf519c4f0ba 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index a6802b5b897..7fec455622d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index a6802b5b897..7fec455622d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 1c237c9aa7c..09199fd186c 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index c474cf97d6e..5e4bcd522d6 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 725ea1d22f2..57d872cd1d1 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 5fb916ac19a..d3b72435515 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 55977b89e95..4a430e69b89 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 11fa9e757a5..a3aa5ece399 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 4277bcf944a..a3ba3aa8ddb 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h index 0206932b878..7682e346cba 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 5df0748d857..75589464d13 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 15e951c34e7..3ff74b43d32 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index ae8a4a0202a..93d31391b21 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index f11d71c2efa..7a6528a817e 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 7f2970583dd..6ef6cc317a8 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index be379f5d0c8..ba807eb3ee6 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 184b7061919..54bb7ad725f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index da33cbb32a5..ced02231dc0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 27456b41297..d24c503a560 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index a2d4256ddf3..0c19fceffd4 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 27456b41297..d24c503a560 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 85f967556db..5c22a959ab3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index ce5b9bd3cdb..89685738a1f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index ce5b9bd3cdb..89685738a1f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 962bd1298d7..6276d25a305 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index eea631ca4eb..9dab88407e2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 40484d7077f..0bf15428296 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 42d1e225a18..1795f2a14fd 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 9641f93417b..83c4a485e83 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 51e70be534c..77aacb1f2bf 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 51e70be534c..77aacb1f2bf 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 78ea6e506ee..2e36a0ce91e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 51e70be534c..77aacb1f2bf 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 51e70be534c..77aacb1f2bf 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 61c90e7fb8d..fda55e76002 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 9f5abfc473c..2837f3bb150 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 73865a643dc..5a5107b47c6 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 74f03df4826..11b49c53412 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index a846ad91065..c8977845e05 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 82f54204bc8..86a3392eb88 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index 7e2a8392a97..be70bb89599 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h index f2ac642676d..719c93987a4 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 0b26bc8f575..2d8b9d232d5 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 4f366c465f3..e1b55d9df8a 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 7bd27a7d251..3157126e284 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index 4680c798f13..9593b273923 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 87cc1ab5b06..6fd00fe88e9 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 101a4811d70..db8589f861e 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index f8ae1590b88..1d8cd64f6f3 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index 4f057984d0c..f7d7905ead8 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -3003,28 +3003,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3032,9 +3032,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 0b26bc8f575..2d8b9d232d5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 3f1ba66c25e..3f9aead89ea 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index cb7df2cc3d1..04619448cdd 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index f2bc1784b2f..bb739d04734 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index a928598a370..a258a70730f 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index b4af23b01bd..d5c96bb6d69 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index e3527e44f38..6b5b32d780e 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 0e544fd6df1..428be6ae0f7 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index f792a6f2189..801ed12720c 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 3723ae09e74..6a0e1e6cbcc 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 7dd04663ad1..ccd0f68e7e1 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 1c40cc26f8b..64d527db281 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 6eb053e83bc..c166afbb9f8 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index f3fa93893c5..21d50cfe02e 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -3002,28 +3002,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3031,9 +3031,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 749aef26422..6ec79791818 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -3002,28 +3002,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3031,9 +3031,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 8b51f4ec390..d76655c0ad1 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 48c676c43d0..f5eb1de09f9 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 050a1f58055..6d94c466e40 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index e379a232d92..273ba6bb01a 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index e379a232d92..273ba6bb01a 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 97709561bf5..88563f5e0ec 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index ab6ef157e1e..b9d50efb548 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index ffb0e3e15d7..8fddaf6eaca 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 2067ae4a497..10db8aba54c 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -2999,28 +2999,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3028,9 +3028,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 4f422c537f5..2191090b4f4 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index aca3f5e09e9..e8e7d0c61d5 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index ffe37f085db..ccac4d64aaa 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index b0b2ae61ced..8b38b420fe2 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 28faa5b2b48..95e4238a768 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index d876a2ddbf8..bc161df0f39 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -3000,28 +3000,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3029,9 +3029,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 3dcaa18e4df..d7f3852d6ec 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 8c3331c98b0..34e08611497 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 5620b0469ea..475550949f1 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 5620b0469ea..475550949f1 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 3dcaa18e4df..d7f3852d6ec 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 5620b0469ea..475550949f1 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 5620b0469ea..475550949f1 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index d70e767d643..5cded0dbaa4 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index d70e767d643..5cded0dbaa4 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index d70e767d643..5cded0dbaa4 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index ecaa5d2873d..dcec52b2696 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index ecaa5d2873d..dcec52b2696 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index ecaa5d2873d..dcec52b2696 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 2c3ee0cf7a6..68db50708fb 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 050a1f58055..6d94c466e40 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index ecaa5d2873d..dcec52b2696 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 2c3ee0cf7a6..68db50708fb 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 0aeefa96da9..7c222d689ad 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 050a1f58055..6d94c466e40 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 8b62deace4c..d7984059852 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index e59d5d8ca4d..31b95f08ef8 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 3dcaa18e4df..d7f3852d6ec 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 3dcaa18e4df..d7f3852d6ec 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 3528423a2e2..dce410dd300 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 7047e9c8e50..8ed4e750bdd 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 1dbd50c3592..97396df6302 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 9d94e256145..13a61dc9459 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -3002,28 +3002,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3031,9 +3031,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 5c3c6e8eea9..0ded4fc4401 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 2046bfe9447..a12de4b2742 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -3002,28 +3002,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3031,9 +3031,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index d8e1795d3a2..b30ce8372f5 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index e292f0788de..aaa7e93236c 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Kingroon/KP5L/Configuration_adv.h b/config/examples/Kingroon/KP5L/Configuration_adv.h index 092a11b9dac..74adfcd228b 100644 --- a/config/examples/Kingroon/KP5L/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 2604feafd24..55541ae88eb 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index 5b849d04156..8dbc2292d34 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index ea5387181e7..5e723404ba0 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -3000,28 +3000,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3029,9 +3029,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index fdf985d5781..dcf118789fa 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 07ff9e85d12..d4ce3fec725 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 44b31298ed0..8f33aeeab74 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -2990,28 +2990,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3019,9 +3019,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 47e5cb7e079..f884d646c7b 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index a4f73795b09..b0871aab265 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 12c1efb5ec0..a72c0d4b8a9 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index ca41086c861..d0ea13ad0fd 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 586be63b3d7..7b40357ffac 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index bbad4c33789..a18c7e5fe6d 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 324d9a00db1..79a4813f4df 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index a7d08391c1f..1a7f5d666bb 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index 0508d61a7f4..5e7a6f24f12 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ #define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index b7ca7f4076d..a3949fc8065 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ #define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 7e5e434dd76..7f3425681a0 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index a2b76ef0f44..ecc4ac9867c 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index af7e1ecf6fa..174251ab7b9 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -3004,28 +3004,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3033,9 +3033,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index df829dc95c7..2d192c6e2dd 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -3001,28 +3001,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3030,9 +3030,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index d940c3361eb..2d8f05f5c52 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index d9f0afd1f25..d87d71ce786 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 050a1f58055..6d94c466e40 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 28c54bd0b65..25171e1c8f9 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 28c54bd0b65..25171e1c8f9 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 28c54bd0b65..25171e1c8f9 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index 2299460bbcb..e9bb9e695bb 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 195ee7efa76..94d91154840 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 1b74891e634..e1838760529 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 941472b59ab..163f298e26d 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 6180b73a870..39b9b82f6be 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index cbcc15f78ca..49bd85330f8 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 55bd1d411c8..ae93d896768 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 5b13ccd25e5..d30b8467593 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index e0f7e3c17af..b0786ad5628 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index d0f28fe0d68..83a6b1aa917 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 4772814272f..fbf9de2d6c0 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index e80d8995c0b..2fc455fb022 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 3919ad62704..e09a172601e 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index fb811412c1b..f50f1c8fc95 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index a094886f067..00c6033d97d 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 90be9d7e3ff..62a11479f70 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 0b8866fa73d..cb183d20c15 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 5ecb9b07e46..93c03309df6 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index de14fc5b529..096bf16f930 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 6e835b969cd..6d30d27f9fd 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 0b6b4f4f08e..395f30bc7d3 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 0b6b4f4f08e..395f30bc7d3 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index cb8475f22af..e1230a3705e 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 59c15974456..eeafd9f866d 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index eccf49e9730..dbe3dcdc189 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 199ff42ba80..3153d81dbbb 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index 69633d303bd..48dd9d88d48 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index dfc150bc324..099abe4aa8c 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index b5c310e3651..f7434b9a854 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -3000,28 +3000,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3029,9 +3029,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index fa948545746..afac629dd58 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -3000,28 +3000,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3029,9 +3029,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index 6fa63799b7c..f4def55ddb6 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 2c2ce9124bf..c10e337e999 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -2995,28 +2995,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3024,9 +3024,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 9928c72c2af..5459e0b2131 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 9928c72c2af..5459e0b2131 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 5eebd2be6d5..ace27366b5d 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index ed2f1be049a..3937e692e6a 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -3003,28 +3003,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3032,9 +3032,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 41dc028c62e..dbd52443f98 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -3003,28 +3003,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3032,9 +3032,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index b83a3c7bd90..ab0bdf507ca 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 6614ddb4d86..43cdd446865 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index f3ad1fb72b2..7d693000aad 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ #define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index ce99353d7ae..f2473cf0807 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 302cf4bf745..9f6bac4d134 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index aac3e1b133c..76f45365f5f 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 9dd42fc4e82..6423c8055a9 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index 9f0ab167bac..2e14e5a9063 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 527c213cf27..1292d670b89 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index bfdd09234d8..24b8ad22a2b 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -3009,28 +3009,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3038,9 +3038,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 636178b34dd..3e18f8cf9b6 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -3009,28 +3009,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3038,9 +3038,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 51887161356..bfc8c805159 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 51887161356..bfc8c805159 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index cc6a891fb47..410e74e88f8 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 5bdeb538e56..2fa080af01b 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index eb264a1d869..b47da7626ef 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 19cddbd3e21..6d0ba4a7e96 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 80b1fcdeeab..50cf6ba10e5 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index fb03971289c..f83556e8566 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index fb03971289c..f83556e8566 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 960ec051123..acff1298beb 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 6561842c50a..0c2621b647b 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 164371e0cb9..e1c4f33c72c 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 2096add72b8..e7a9e8071b8 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 1b1773cd049..b30a9867368 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 4455aa47d16..157a2dde0a3 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index f3a0f609315..325bfed7204 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -2999,28 +2999,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3028,9 +3028,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 9ad580dc68d..537bdc56395 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 9ad580dc68d..537bdc56395 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 0c461308452..619d28f4ffe 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index b934eb41900..897aa1bb774 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index d5e2e5625de..43544484cef 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index dd0bfbcca30..c64833b92ff 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index dd0bfbcca30..c64833b92ff 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 6850928cb77..150d2ce3ef9 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 88d595285b1..40402d3ef73 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 88d595285b1..40402d3ef73 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 88d595285b1..40402d3ef73 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 88d595285b1..40402d3ef73 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index a5d542921ea..4ac2a762211 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 038765aee8e..d7ee4f62165 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 54b5ec60494..5c64c0caa58 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index ba8d1001ba2..010671bc527 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index d25bee53d04..2f5a3101b58 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index ad127411758..60560cda74e 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -2998,28 +2998,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3027,9 +3027,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 6850928cb77..150d2ce3ef9 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 02168c04df9..4bd11ed3883 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index db40462f3a2..b901846b282 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -2997,28 +2997,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3026,9 +3026,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 21fd0708491..5793e2cd249 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index ae007694d4e..c0560d3ecd6 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 792668c7645..281ac58130c 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 2b2b95d90d8..0d4037f6c15 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index acf7cebee1d..b2d52d2624d 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -2996,28 +2996,28 @@ * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define Z4_CS_PIN -1 - //#define I_CS_PIN -1 - //#define J_CS_PIN -1 - //#define K_CS_PIN -1 - //#define U_CS_PIN -1 - //#define V_CS_PIN -1 - //#define W_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - //#define E6_CS_PIN -1 - //#define E7_CS_PIN -1 + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define Z4_CS_PIN -1 + //#define I_CS_PIN -1 + //#define J_CS_PIN -1 + //#define K_CS_PIN -1 + //#define U_CS_PIN -1 + //#define V_CS_PIN -1 + //#define W_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -3025,9 +3025,9 @@ * but you can override or define them here. */ //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 + //#define TMC_SPI_MOSI -1 + //#define TMC_SPI_MISO -1 + //#define TMC_SPI_SCK -1 // @section tmc/serial