From e2f7cb0905569283ce24e13f1e1869ce91911119 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Wed, 6 Jul 2016 18:37:21 -0700
Subject: [PATCH] Don't use axis_codes if a literal will do

---
 Marlin/Marlin_main.cpp | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 37ccd983c80b..2dc8e24276f4 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2897,9 +2897,7 @@ inline void gcode_G28() {
 
   #else // NOT DELTA
 
-    bool  homeX = code_seen(axis_codes[X_AXIS]),
-          homeY = code_seen(axis_codes[Y_AXIS]),
-          homeZ = code_seen(axis_codes[Z_AXIS]);
+    bool homeX = code_seen('X'), homeY = code_seen('Y'), homeZ = code_seen('Z');
 
     home_all_axis = (!homeX && !homeY && !homeZ) || (homeX && homeY && homeZ);
 
@@ -3522,7 +3520,7 @@ inline void gcode_G28() {
         delta_grid_spacing[0] = xGridSpacing;
         delta_grid_spacing[1] = yGridSpacing;
         float zoffset = zprobe_zoffset;
-        if (code_seen(axis_codes[Z_AXIS])) zoffset += code_value_axis_units(Z_AXIS);
+        if (code_seen('Z')) zoffset += code_value_axis_units(Z_AXIS);
       #else // !DELTA
         /**
          * solve the plane equation ax + by + d = z
@@ -3835,7 +3833,7 @@ inline void gcode_G28() {
  * G92: Set current position to given X Y Z E
  */
 inline void gcode_G92() {
-  bool didE = code_seen(axis_codes[E_AXIS]);
+  bool didE = code_seen('E');
 
   if (!didE) stepper.synchronize();
 
@@ -5017,7 +5015,7 @@ inline void gcode_M18_M84() {
     stepper_inactive_time = code_value_millis_from_seconds();
   }
   else {
-    bool all_axis = !((code_seen(axis_codes[X_AXIS])) || (code_seen(axis_codes[Y_AXIS])) || (code_seen(axis_codes[Z_AXIS])) || (code_seen(axis_codes[E_AXIS])));
+    bool all_axis = !((code_seen('X')) || (code_seen('Y')) || (code_seen('Z')) || (code_seen('E')));
     if (all_axis) {
       stepper.finish_and_disable();
     }
@@ -5265,11 +5263,9 @@ inline void gcode_M201() {
  * M203: Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec
  */
 inline void gcode_M203() {
-  for (int8_t i = 0; i < NUM_AXIS; i++) {
-    if (code_seen(axis_codes[i])) {
+  for (int8_t i = 0; i < NUM_AXIS; i++)
+    if (code_seen(axis_codes[i]))
       planner.max_feedrate[i] = code_value_axis_units(i);
-    }
-  }
 }
 
 /**