diff --git a/.github/workflows/test-builds.yml b/.github/workflows/test-builds.yml index e45bf42f29a7..c6afaffebf7a 100644 --- a/.github/workflows/test-builds.yml +++ b/.github/workflows/test-builds.yml @@ -58,15 +58,16 @@ jobs: #- STM32F103RC_btt_maple - STM32F103RC_btt_USB_maple - - STM32F103RC_fysetc + - STM32F103RC_fysetc_maple - STM32F103RC_meeb - - jgaurora_a5s_a1 + - jgaurora_a5s_a1_maple - STM32F103VE_longer_maple #- mks_robin_maple - - mks_robin_lite - - mks_robin_pro + - mks_robin_lite_maple + - mks_robin_pro_maple #- mks_robin_nano35_maple #- STM32F103RET6_creality_maple + - STM32F103VE_ZM3E4V2_USB_maple # STM32 (ST) Environments diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index ba3c9f978c63..2ed585919966 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -346,6 +346,9 @@ #define BOARD_BEAST 4048 // STM32F103RET6 Libmaple-based controller #define BOARD_MINGDA_MPX_ARM_MINI 4049 // STM32F103ZET6 Mingda MD-16 #define BOARD_GTM32_PRO_VD 4050 // STM32F103VET6 controller +#define BOARD_ZONESTAR_ZM3E2 4051 // Zonestar ZM3E2 (STM32F103RCT6) +#define BOARD_ZONESTAR_ZM3E4 4052 // Zonestar ZM3E4 V1 (STM32F103VCT6) +#define BOARD_ZONESTAR_ZM3E4V2 4053 // Zonestar ZM3E4 V2 (STM32F103VCT6) // // ARM Cortex-M4F diff --git a/Marlin/src/lcd/tft_io/touch_calibration.cpp b/Marlin/src/lcd/tft_io/touch_calibration.cpp index 0f9d25caeb62..2a54d2af4005 100644 --- a/Marlin/src/lcd/tft_io/touch_calibration.cpp +++ b/Marlin/src/lcd/tft_io/touch_calibration.cpp @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/lcd/tft_io/touch_calibration.h b/Marlin/src/lcd/tft_io/touch_calibration.h index f8cbf99bf000..112fbdca301e 100644 --- a/Marlin/src/lcd/tft_io/touch_calibration.h +++ b/Marlin/src/lcd/tft_io/touch_calibration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h index d648b25efb13..cecb44efbe18 100644 --- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h +++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h @@ -212,7 +212,7 @@ * BEEPER | 5 6 ENT (BTN_ENC) (LCD_D4) P0_15 | 5 6 P0_20 (BTN_EN2) * (SKR_RX1) TX | 7 8 | RX (SKR_TX1) Reset | 7 8 | P0_19 (BTN_EN1) * NC | 9 10 | NC (BTN_ENC) P0_16 | 9 10 | P2_08 (BEEPER) - * ------ ------ + * ------ ------ */ #define BEEPER_PIN EXP1_10_PIN diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index b3e16056136f..f1c431cf048b 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -561,6 +561,12 @@ #include "stm32f1/pins_BEAST.h" // STM32F103VE? env:STM32F103VE env:STM32F103RE_maple #elif MB(MINGDA_MPX_ARM_MINI) #include "stm32f1/pins_MINGDA_MPX_ARM_MINI.h" // STM32F1 env:mingda_mpx_arm_mini +#elif MB(ZONESTAR_ZM3E2) + #include "stm32f1/pins_ZM3E2_V1_0.h" // STM32F1 env:STM32F103RC_ZM3E2_USB env:STM32F103RC_ZM3E2_USB_maple +#elif MB(ZONESTAR_ZM3E4) + #include "stm32f1/pins_ZM3E4_V1_0.h" // STM32F1 env:STM32F103VC_ZM3E4_USB env:STM32F103VC_ZM3E4_USB_maple +#elif MB(ZONESTAR_ZM3E4V2) + #include "stm32f1/pins_ZM3E4_V2_0.h" // STM32F1 env:STM32F103VE_ZM3E4V2_USB env:STM32F103VE_ZM3E4V2_USB_maple // // ARM Cortex-M4F diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h index c51e7f48d94a..9dc02c495b45 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h @@ -23,7 +23,7 @@ #define SKR_MINI_E3_V2 -#define BOARD_CUSTOM_BUILD_FLAGS -DTONE_CHANNEL=4 -DTONE_TIMER=4 +#define BOARD_CUSTOM_BUILD_FLAGS -DTONE_CHANNEL=4 -DTONE_TIMER=4 -DTIMER_TONE=4 // Onboard I2C EEPROM #if NO_EEPROM_SELECTED diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h index bded0edd3a7b..98465a86073e 100644 --- a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h +++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h @@ -45,14 +45,19 @@ #endif //#define MCU_STM32F103ZE // not yet required -// Enable EEPROM Emulation for this board, so that we don't overwrite factory data -//#define I2C_EEPROM // AT24C64 -//#define MARLIN_EEPROM_SIZE 0x8000UL // 64KB +// Enable EEPROM Emulation for this board, so that we don't overwrite factory data +#if NO_EEPROM_SELECTED + //#define I2C_EEPROM // AT24C64 + //#define FLASH_EEPROM_EMULATION +#endif -//#define FLASH_EEPROM_EMULATION -//#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB -//#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL) +#if ENABLED(I2C_EEPROM) + //#define MARLIN_EEPROM_SIZE 0x8000UL // 32KB +#elif ENABLED(FLASH_EEPROM_EMULATION) + //#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB + //#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL) +#endif // // Limit Switches diff --git a/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h b/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h index 14f2ad981ac5..3fed0adac336 100644 --- a/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h @@ -22,7 +22,7 @@ #pragma once /** - * MKS Robin mini (STM32F130VET6) board pin assignments + * MKS Robin mini (STM32F103VET6) board pin assignments */ #if NOT_TARGET(STM32F1, STM32F1xx) diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h index f91297805150..4d798ffe282b 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h @@ -22,7 +22,7 @@ #pragma once /** - * MKS Robin (STM32F130ZET6) board pin assignments + * MKS Robin (STM32F103ZET6) board pin assignments * https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware */ diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h index 7aa308f7b309..2fc99f297104 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -22,7 +22,7 @@ #pragma once /** - * MKS Robin nano (STM32F130VET6) board pin assignments + * MKS Robin nano (STM32F103VET6) board pin assignments */ #include "env_validate.h" diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h index be23394af7ab..d4a2f59b4256 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h @@ -22,7 +22,7 @@ #pragma once /** - * MKS Robin mini (STM32F130VET6) board pin assignments + * MKS Robin mini (STM32F103VET6) board pin assignments */ #include "env_validate.h" diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h index 368c0a24582e..2a5c9f727372 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h @@ -22,7 +22,7 @@ #pragma once /** - * MKS Robin nano (STM32F130VET6) board pin assignments + * MKS Robin nano (STM32F103VET6) board pin assignments * https://github.com/makerbase-mks/MKS-Robin-Nano-V1.X/tree/master/hardware */ diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h index cdb9448410d9..31ce016e67a1 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -22,7 +22,7 @@ #pragma once /** - * MKS Robin nano (STM32F130VET6) board pin assignments + * MKS Robin nano (STM32F103VET6) board pin assignments */ #if NOT_TARGET(__STM32F1__, STM32F1) diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h index 1de3729dcc58..5b59a157f163 100644 --- a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h @@ -22,7 +22,7 @@ #pragma once /** - * ANYCUBIC Trigorilla Pro (STM32F130ZET6) board pin assignments. + * ANYCUBIC Trigorilla Pro (STM32F103ZET6) board pin assignments. * It is the same used by the Tronxy X5SA thanks to ftoz1 for sharing it * https://github.com/MarlinFirmware/Marlin/issues/14655 * https://github.com/MarlinFirmware/Marlin/files/3401484/x5sa-main_board-2.pdf diff --git a/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h b/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h new file mode 100644 index 000000000000..bad5db7125e1 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h @@ -0,0 +1,235 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "env_validate.h" + +#define BOARD_INFO_NAME "ZONESTAR ZM3E2 V1.0" + +#define DISABLE_DEBUG +//#define DISABLE_JTAG + +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800) // 2KB + #define EEPROM_START_ADDRESS (0x08000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +//============================================================================= +// Zonestar ZM3E2 V1.0 (STM32F103RCT6) board pin assignments +//============================================================================= +// PA0 PWR_HOLD | PB0 BEEP | PC0 HEATER_0 +// PA1 FAN_PIN | PB1 KILL | PC1 HEATER_BED +// PA2 TX2 | PB2 LCD_SDA | PC2 TEMP_BED +// PA3 RX2 | PB3 E1_EN | PC3 TEMP_E0 +// PA4 SD_CS | PB4 Z_STOP | PC4 SD_DETECT +// PA5 SD_SCK | PB5 Z_DIR | PC5 BTN_EN2 +// PA6 SD_MISO | PB6 Z_STEP | PC6 FAN1 +// PA7 SD_MOSI | PB7 Z_EN | PC7 FIL_RUNOUT +// PA8 X_DIR | PB8 Y_STEP | PC8 X_EN +// PA9 LCD_RS | PB9 Y_DIR | PC9 X_STEP +// PA10 LCD_SCK | PB10 BTN_ENC | PC10 Z_MIN_PROBE_PIN +// PA11 USB_D- | PB11 BTN_EN1 | PC11 FIL_RUNOUT2 +// PA12 USB_D+ | PB12 LED | PC12 E1_DIR +// PA13 MS1 | PB13 E0_EN | PC13 Y_STOP +// PA14 MS2 | PB14 E0_STEP | PC14 Y_EN +// PA15 PWM | PB15 E0_DIR | PC15 X_STOP +// PD0 NC +// PD1 NC +// PD2 E1_STEP + +//============================================================================= +// EXP1 connector +// MARK I/O ZONESTAR_12864LCD ZONESTAR_12864OLED +// 10 MOSI PB1 KILL SDA +// 9 SCK PB0 BEEP SCK +// 8 TX1 PA9 DOGLCD_CS CS +// 7 RX1 PA10 DOGLCD_SCK DC +// 6 ENA PC5 BTN_EN2 KNOB_ENB +// 5 DAT PB2 DOGLCD_MOSI RESET +// 4 TX3 PB10 BTN_ENC KNOB_ENC +// 3 RX3 PB11 BTN_EN1 KNOB_ENA +// 2 +5V +// 1 GND + +#define EXP1_03_PIN PB11 +#define EXP1_04_PIN PB10 +#define EXP1_05_PIN PB2 +#define EXP1_06_PIN PC5 +#define EXP1_07_PIN PA10 +#define EXP1_08_PIN PA9 +#define EXP1_09_PIN PB0 +#define EXP1_10_PIN PB1 + +// AUX1 connector +// 1 +5V +// 2 TX2 PA2 UART2_TX +// 3 RX2 PA3 UART2_RX +// 4 GND + +// AUX2 connector to BLTouch +// 1 +5V +// 2 SEN PC10 +// 3 PWM PA15 +// 4 GND +//============================================================================= + +// +// Servos +// +#define SERVO0_PIN PA15 + +// +// Limit Switches +// +#define X_STOP_PIN PC15 +#define Y_STOP_PIN PC13 +#define Z_STOP_PIN PB4 + +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN PC10 // BLTouch (3DTouch) +#endif + +// +// Filament Runout Sensor +// +#define FIL_RUNOUT_PIN PC7 // E0_SW +//#define FIL_RUNOUT2_PIN PC11 // E1_SW + +// +// Steppers +// +#define MS1_PIN PA13 +#define MS2_PIN PA14 + +#define X_STEP_PIN PC9 +#define X_DIR_PIN PA8 +#define X_ENABLE_PIN PC8 + +#define Y_STEP_PIN PB8 +#define Y_DIR_PIN PB9 +#define Y_ENABLE_PIN PC14 + +#define Z_STEP_PIN PB6 +#define Z_DIR_PIN PB5 +#define Z_ENABLE_PIN PB7 + +#define E0_STEP_PIN PB14 +#define E0_DIR_PIN PB15 +#define E0_ENABLE_PIN PB13 + +#define E1_STEP_PIN PD2 +#define E1_DIR_PIN PC12 +#define E1_ENABLE_PIN PB3 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC0 // EXTRUDER 1 +#define HEATER_BED_PIN PC1 // BED + +#define FAN1_PIN PC6 +#define FAN_PIN PA1 + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PC2 // Analog Input +#define TEMP_0_PIN PC3 // Analog Input + +#define LED_PIN PB12 +//#define KILL_PIN PB1 // @EXP1 +#define SUICIDE_PIN PA0 + +// +// SD card +// +#define ENABLE_SPI1 +#define SD_DETECT_PIN PC4 +#define SD_SCK_PIN PA5 +#define SD_MISO_PIN PA6 +#define SD_MOSI_PIN PA7 +#define SD_SS_PIN PA4 + +// +// LCD Pins +// +#if ENABLED(ZONESTAR_12864LCD) + + //================================================================================ + // LCD 128x64 + //================================================================================ + // EXP1 connector + // MARK I/O ZONESTAR_12864LCD + // 10 MOSI PB1 KILL + // 9 SCK PB0 BEEP + // 8 TX1 PA9 LCD_PINS_RS + // 7 RX1 PA10 LCD_PINS_D4 + // 6 ENA PC5 BTN_EN2 + // 5 DAT PB2 LCD_PINS_ENABLE + // 4 TX3 PB10 BTN_ENC + // 3 RX3 PB11 BTN_EN1 + // 2 +5V + // 1 GND + + #define LCDSCREEN_NAME "ZONESTAR LCD12864" + #define LCD_PINS_RS EXP1_08_PIN + #define LCD_PINS_ENABLE EXP1_05_PIN + #define LCD_PINS_D4 EXP1_07_PIN + //#define KILL_PIN EXP1_10_PIN + #define BEEPER_PIN EXP1_09_PIN + #define BTN_EN1 EXP1_03_PIN + #define BTN_EN2 EXP1_06_PIN + #define BTN_ENC EXP1_04_PIN + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #define BOARD_ST7920_DELAY_2 DELAY_NS(200) + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + +#elif EITHER(ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306) + + //================================================================================ + // OLED 128x64 + //================================================================================ + // 10 MOSI PB1 OLED_SDA + // 9 SCK PB0 OLED_SCK + // 8 TX1 PA9 OLED_CS + // 7 RX1 PA10 OLED_DC + // 6 ENA PC5 KNOB_ENA + // 5 DAT PB2 OLED_RESET + // 4 TX3 PB10 KNOB_ENC + // 3 RX3 PB11 KNOB_ENB + + #define FORCE_SOFT_SPI + #define LCDSCREEN_NAME "ZONESTAR 12864OLED" + #define LCD_PINS_RS EXP1_05_PIN // = LCD_RESET_PIN + #define LCD_PINS_DC EXP1_07_PIN // DC + #define DOGLCD_CS EXP1_08_PIN // CS + #define DOGLCD_A0 LCD_PINS_DC // A0 = DC + #define DOGLCD_MOSI EXP1_10_PIN // SDA + #define DOGLCD_SCK EXP1_09_PIN // SCK + // Encoder + #define BTN_EN1 EXP1_03_PIN + #define BTN_EN2 EXP1_06_PIN + #define BTN_ENC EXP1_04_PIN + +#endif diff --git a/Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h b/Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h new file mode 100644 index 000000000000..8a6bb4b5f87b --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h @@ -0,0 +1,355 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "env_validate.h" + +#define BOARD_INFO_NAME "ZONESTAR ZM3E4 V1.0" + +//#define DISABLE_DEBUG +#define DISABLE_JTAG + +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800) // 2KB + #define EEPROM_START_ADDRESS (0x08000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +//#define OPTION_DUALZ_DRIVE +//#define OPTION_Z2_ENDSTOP +//#define SWITCH_EXTRUDER_SEQUENCE + +//============================================================================= +// Zonestar ZM3E4 V1.0 (STM32F103VCT6) board pin assignments +//============================================================================= +// PA0 | PB0 HEAT_1 | PC0 AXU_SDA +// PA1 | PB1 FAN1 | PC1 TEMP_E1 +// PA2 HEAT_BED | PB2 BOOT1 | PC2 TEMP_E0 +// PA3 PWR_HOLD | PB3 SPI3_SCK | PC3 TEMP_BED +// PA4 SD_CS | PB4 SPI3_MISO | PC4 SD_DETECT +// PA5 SD_SCK | PB5 SPI3_MOSI | PC5 HEAT_0 +// PA6 SD_MISO | PB6 SERVO3 | PC6 E1_STEP +// PA7 SD_MOSI | PB7 SERVO2 | PC7 E1_EN +// PA8 X_DIR | PB8 FAN2/SERVO1 | PC8 FIL_RUNOUT_PIN +// PA9 UART1_RX | PB9 SERVO0 | PC9 E0_DIR +// PA10 UART1_TX | PB10 TX3 | PC10 E0_EN +// PA11 USB_D- | PB11 RX3 | PC11 Z2_EN +// PA12 USB_D+ | PB12 LED | PC12 Z2_STEP +// PA13 SWD_SDO | PB13 Z1_MAX | PC13 X_MIN +// PA14 SWD_SCK | PB14 Y_MAX | PC14 WIFI_RST +// PA15 SPI3_CS | PB15 PWR_DET | PC15 WIFI_CS +// PD0 Z2_DIR | PE0 Y_EN +// PD1 Z2_MIN | PE1 Y_STEP +// PD2 Z1_EN | PE2 Y_DIR +// PD3 Z1_STEP | PE3 Y_MIN +// PD4 Z1_DIR | PE4 X_DIR +// PD5 WIFI_RXD | PE5 X_STEP +// PD6 WIFI_TXD | PE6 X_EN +// PD7 Z1_MIN | PE7 AXU_SCL +// PD8 X_MAX | PE8 BTN_EN1 +// PD9 E3_DIR | PE9 LCD_SCK +// PD10 E3_STEP | PE10 LCD_MOSI +// PD11 E3_EN | PE11 BEEPER +// PD12 E2_DIR | PE12 LCD_EN +// PD13 E2_STEP | PE13 KILL +// PD14 E2_EN | PE14 BTN_EN2 +// PD15 E1_DIR | PE15 BTN_ENC +//============================================================================= + +// EXP1 connector +// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864 +// 10 RS PE13 KILL BTN_ENC +// 9 BP PE11 BEEP BEEP +// 8 EN PE12 DOGLCD_CS LCDRS +// 7 MOSI PE10 DOGLCD_SCK LCDE +// 6 EN1 PE8 BTN_EN1 NC +// 5 SCK PE9 DOGLCD_MOSI LCD4 +// 4 ENC PE15 BTN_ENC NC +// 3 EN2 PE14 BTN_EN2 NC +// 2 +5V +5V +// 1 GND GND + +#define EXP1_03_PIN PE14 +#define EXP1_04_PIN PE15 +#define EXP1_05_PIN PE9 +#define EXP1_06_PIN PE8 +#define EXP1_07_PIN PE10 +#define EXP1_08_PIN PE12 +#define EXP1_09_PIN PE11 +#define EXP1_10_PIN PE13 + +// EXP2 connector +// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864 +// 10 +// 9 +// 8 RX0 PA9 UART1_RX +// 7 TX0 PA10 UART1_TX BTN_EN2 +// 6 CS3 PA15 +// 5 MISO3 PB4 BTN_EN1 +// 4 MOSI3 PB5 KILL +// 3 SCK3 PB3 +// 2 +5V +5V +// 1 GND GND + +#define EXP2_03_PIN PB3 +#define EXP2_04_PIN PB5 +#define EXP2_05_PIN PB4 +#define EXP2_06_PIN PA15 +#define EXP2_07_PIN PA10 +#define EXP2_08_PIN PA9 + +// AUX1 connector +// 1 +5V +// 2 GND +// 3 RX3 PB11 UART3_RX +// 4 TX3 PB10 UART3_TX +// 5 SCL PE7 +// 6 SDA PC0 + +// WiFi +// 1 +5V +// 2 GND +// 3 WIFI_TXD PD5 UART2_RX +// 4 WIFI_RXD PD6 UART2_TX +// 5 WIFI_RST PC14 +// 6 WIFI_CS PC15 +//============================================================================= + +// +// Servos +// +#define SERVO0_PIN PB9 +#define SERVO2_PIN PB7 +#define SERVO3_PIN PB6 + +// +// Limit Switches +// +#define X_MIN_PIN PC13 +#define X_MAX_PIN PD8 +#define Y_MIN_PIN PE3 +#define Y_MAX_PIN PB14 +#define Z_MIN_PIN PD7 +#define Z_MAX_PIN PB13 + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PC8 +#endif + +// +// Steppers +// +#if ENABLED(COREXY) + #define X_ENABLE_PIN PE0 + #define X_STEP_PIN PE1 + #define X_DIR_PIN PE2 + + #define Y_ENABLE_PIN PE6 + #define Y_STEP_PIN PE5 + #define Y_DIR_PIN PE4 +#else + #define X_ENABLE_PIN PE6 + #define X_STEP_PIN PE5 + #define X_DIR_PIN PE4 + + #define Y_ENABLE_PIN PE0 + #define Y_STEP_PIN PE1 + #define Y_DIR_PIN PE2 +#endif + +#define Z_ENABLE_PIN PD2 +#define Z_STEP_PIN PD3 +#define Z_DIR_PIN PD4 + +#ifdef OPTION_DUALZ_DRIVE + #define Z2_ENABLE_PIN PC11 + #define Z2_STEP_PIN PC12 + #define Z2_DIR_PIN PD0 +#endif + +#ifdef OPTION_Z2_ENDSTOP + #define Z2_MIN_PIN PD1 + #define Z2_MAX_PIN PB12 +#endif + +#ifdef SWITCH_EXTRUDER_SEQUENCE + #define E3_ENABLE_PIN PC10 + #define E3_STEP_PIN PA8 + #define E3_DIR_PIN PC9 + + #define E2_STEP_PIN PC6 + #define E2_DIR_PIN PD15 + #define E2_ENABLE_PIN PC7 + + #define E1_STEP_PIN PD13 + #define E1_DIR_PIN PD12 + #define E1_ENABLE_PIN PD14 + + #define E0_STEP_PIN PD10 + #define E0_DIR_PIN PD9 + #define E0_ENABLE_PIN PD11 +#else + #define E0_ENABLE_PIN PC10 + #define E0_STEP_PIN PA8 + #define E0_DIR_PIN PC9 + + #define E1_STEP_PIN PC6 + #define E1_DIR_PIN PD15 + #define E1_ENABLE_PIN PC7 + + #define E2_STEP_PIN PD13 + #define E2_DIR_PIN PD12 + #define E2_ENABLE_PIN PD14 + + #define E3_STEP_PIN PD10 + #define E3_DIR_PIN PD9 + #define E3_ENABLE_PIN PD11 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC2 // TH0 +#define TEMP_BED_PIN PC3 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC5 // HEATER0 +#define HEATER_BED_PIN PA2 // HOT BED + +#if ENABLED(OPTION_CHAMBER) + #define TEMP_CHAMBER_PIN PC1 + #define HEATER_CHAMBER_PIN PB0 +#else + #define TEMP_1_PIN PC1 // TH1 + #define HEATER_1_PIN PB0 // HEATER1 +#endif + +#define FAN_PIN PB1 // FAN1 +#define FAN1_PIN PB8 // FAN2 + +// +// Misc. Functions +// + +//#define POWER_LOSS_PIN PB15 +#define LED_PIN PA0 +#define SUICIDE_PIN PA3 + +// +// SD card +// +#define ENABLE_SPI1 +#define SD_DETECT_PIN PC4 +#define SD_SCK_PIN PA5 +#define SD_MISO_PIN PA6 +#define SD_MOSI_PIN PA7 +#define SD_SS_PIN PA4 + +// WiFi Functions +#define WIFI_RST PC15 +#define WIFI_EN PC14 + +// +// LCD / Controller +// +#if ENABLED(ZONESTAR_12864LCD) + #define LCDSCREEN_NAME "ZONESTAR LCD12864" + #define LCD_PINS_RS EXP1_08_PIN // 7 CS make sure for zonestar zm3e4! + #define LCD_PINS_ENABLE EXP1_05_PIN // 6 DATA make sure for zonestar zm3e4! + #define LCD_PINS_D4 EXP1_07_PIN // 8 SCK make sure for zonestar zm3e4! + #define BEEPER_PIN EXP1_09_PIN + #define KILL_PIN -1 // EXP1_10_PIN + #define BTN_EN1 EXP1_06_PIN + #define BTN_EN2 EXP1_03_PIN + #define BTN_ENC EXP1_04_PIN +#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define LCDSCREEN_NAME "REPRAPDISCOUNT LCD12864" + #define LCD_PINS_RS EXP1_08_PIN // 7 CS make sure for zonestar zm3e4! + #define LCD_PINS_ENABLE EXP1_07_PIN // 6 DATA make sure for zonestar zm3e4! + #define LCD_PINS_D4 EXP1_05_PIN // 8 SCK make sure for zonestar zm3e4! + #define BEEPER_PIN EXP1_09_PIN + #define KILL_PIN EXP2_04_PIN + #define BTN_EN1 EXP2_05_PIN + #define BTN_EN2 EXP2_07_PIN + #define BTN_ENC EXP1_10_PIN +#elif ENABLED(ZONESTAR_DWIN_LCD) + // Connect to EXP2 connector + #define LCDSCREEN_NAME "ZONESTAR DWIN LCD" + #define BEEPER_PIN EXP2_06_PIN + #define KILL_PIN PC0 + #define BTN_EN1 EXP2_03_PIN + #define BTN_EN2 EXP2_04_PIN + #define BTN_ENC EXP2_05_PIN +#endif + +#if ENABLED(ZONESTAR_LCD2004_KNOB) + #define LCDSCREEN_NAME "LCD2004 KNOB" + #define LCD_PINS_RS EXP1_08_PIN + #define LCD_PINS_ENABLE EXP1_07_PIN + #define LCD_PINS_D4 EXP1_05_PIN + #define LCD_PINS_D5 EXP1_06_PIN + #define LCD_PINS_D6 EXP1_03_PIN + #define LCD_PINS_D7 EXP1_04_PIN + #define BTN_EN1 EXP2_07_PIN + #define BTN_EN2 EXP2_05_PIN + #define BTN_ENC EXP1_10_PIN + #define BEEPER_PIN EXP1_09_PIN + #define KILL_PIN EXP2_04_PIN +#elif ENABLED(ZONESTAR_LCD2004_ADCKEY) + #define LCDSCREEN_NAME "LCD2004 5KEY" + #define LCD_PINS_RS EXP1_08_PIN + #define LCD_PINS_ENABLE EXP1_07_PIN + #define LCD_PINS_D4 EXP1_05_PIN + #define LCD_PINS_D5 EXP1_06_PIN + #define LCD_PINS_D6 EXP1_03_PIN + #define LCD_PINS_D7 EXP1_04_PIN + #define ADC_KEYPAD_PIN PC0 // PIN6 of AUX1 +#endif + +#if HAS_MARLINUI_U8GLIB + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #define BOARD_ST7920_DELAY_2 DELAY_NS(250) + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) +#endif + +// Remap SERVO0 PIN for BLTouch +#if ENABLED(BLTOUCH_ON_EXP1) + // BLTouch connected to EXP1 + #define BLTOUCH_PROBE_PIN EXP1_06_PIN + #define BLTOUCH_GND_PIN EXP1_04_PIN + #undef SERVO0_PIN + #define SERVO0_PIN EXP1_03_PIN +#elif ENABLED(BLTOUCH_ON_EXP2) + // BLTouch connected to EXP2 + #define BLTOUCH_PROBE_PIN EXP2_03_PIN + #define BLTOUCH_GND_PIN EXP2_04_PIN + #undef SERVO0_PIN + #define SERVO0_PIN EXP2_06_PIN +#else + #define BLTOUCH_PROBE_PIN PB13 +#endif diff --git a/Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h b/Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h new file mode 100644 index 000000000000..5bbf43bbfac3 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h @@ -0,0 +1,328 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "env_validate.h" + +#define BOARD_INFO_NAME "ZONESTAR ZM3E4 V2.0" + +//#define DISABLE_DEBUG +#define DISABLE_JTAG + +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800) // 2KB + #define EEPROM_START_ADDRESS (0x08000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +//#define OPTION_DUALZ_DRIVE +//#define OPTION_Z2_ENDSTOP +//#define OPTION_REPEAT_PRINTING +//#define SWITCH_EXTRUDER_SEQUENCE + +//============================================================================= +// Zonestar ZM3E4 V2.0 (STM32F103VET6) board pin assignments +//============================================================================= +// PA0 | PB0 HEAT_1 | PC0 AUX_SDA +// PA1 | PB1 FAN1 | PC1 TEMP_E1 +// PA2 HEAT_BED | PB2 BOOT1 | PC2 TEMP_E0 +// PA3 PWR_HOLD | PB3 SPI3_SCK | PC3 TEMP_BED +// PA4 SD_CS | PB4 SPI3_MISO | PC4 SD_DETECT +// PA5 SD_SCK | PB5 SPI3_MOSI | PC5 HEAT_0 +// PA6 SD_MISO | PB6 SERVO3 | PC6 E1_STEP +// PA7 SD_MOSI | PB7 SERVO2 | PC7 E1_EN +// PA8 X_DIR | PB8 FAN2/SERVO1 | PC8 FIL_RUNOUT_PIN +// PA9 UART1_RX | PB9 SERVO0 | PC9 E0_DIR +// PA10 UART1_TX | PB10 TX3 | PC10 E0_EN +// PA11 USB_D- | PB11 RX3 | PC11 Z2_EN +// PA12 USB_D+ | PB12 LED | PC12 Z2_STEP +// PA13 SWD_SDO | PB13 Z1_MAX | PC13 X_MIN +// PA14 SWD_SCK | PB14 Y_MAX | PC14 WIFI_RST +// PA15 SPI3_CS | PB15 PWR_DET | PC15 WIFI_CS +// PD0 Z2_DIR | PE0 Y_EN +// PD1 Z2_MIN | PE1 Y_STEP +// PD2 Z1_EN | PE2 Y_DIR +// PD3 Z1_STEP | PE3 Y_MIN +// PD4 Z1_DIR | PE4 X_DIR +// PD5 WIFI_RXD | PE5 X_STEP +// PD6 WIFI_TXD | PE6 X_EN +// PD7 Z1_MIN | PE7 AUX_SCL +// PD8 X_MAX | PE8 BTN_EN1 +// PD9 E3_DIR | PE9 LCD_SCK +// PD10 E3_STEP | PE10 LCD_MOSI +// PD11 E3_EN | PE11 BEEPER +// PD12 E2_DIR | PE12 LCD_EN +// PD13 E2_STEP | PE13 KILL +// PD14 E2_EN | PE14 BTN_EN2 +// PD15 E1_DIR | PE15 BTN_ENC + +//============================================================================= +// EXP1 connector +// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864 +// 10 RS PE13 KILL BTN_ENC +// 9 BP PE11 BEEP BEEP +// 8 EN PE12 DOGLCD_CS LCDRS +// 7 MOSI PE10 DOGLCD_SCK LCDE +// 6 EN1 PE8 BTN_EN1 NC +// 5 SCK PE9 DOGLCD_MOSI LCD4 +// 4 ENC PE15 BTN_ENC NC +// 3 EN2 PE14 BTN_EN2 NC +// 2 +5V +// 1 GND + +#define EXP1_03_PIN PE14 +#define EXP1_04_PIN PE15 +#define EXP1_05_PIN PE9 +#define EXP1_06_PIN PE8 +#define EXP1_07_PIN PE10 +#define EXP1_08_PIN PE12 +#define EXP1_09_PIN PE11 +#define EXP1_10_PIN PE13 + +// EXP2 connector +// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864 +// 10 SDA PC0 +// 9 SCL PE7 +// 8 RX1 PA9 UART1_RX +// 7 TX1 PA10 UART1_TX BTN_EN2 +// 6 CS3 PA15 +// 5 MISO3 PB4 BTN_EN1 +// 4 MOSI3 PB5 KILL +// 3 SCK3 PB3 +// 2 +5V +// 1 GND + +#define EXP2_03_PIN PB3 +#define EXP2_04_PIN PB5 +#define EXP2_05_PIN PB4 +#define EXP2_06_PIN PA15 +#define EXP2_07_PIN PA10 +#define EXP2_08_PIN PA9 +#define EXP2_09_PIN PE7 +#define EXP2_10_PIN PC0 + +// AUX1 connector +// 1 +5V +// 2 GND +// 3 RX3 PB11 UART3_RX +// 4 TX3 PB10 UART3_TX +// 5 SCL PE7 +// 6 SDA PC0 + +// WiFi +// 1 +5V +// 2 GND +// 3 WIFI_TXD PD5 UART2_RX +// 4 WIFI_RXD PD6 UART2_TX +// 5 WIFI_RST PC14 +// 6 WIFI_CS PC15 +//============================================================================= + +// +// Servos +// +#define SERVO0_PIN PB9 +//#define SERVO1_PIN PB8 +#define SERVO2_PIN PB7 +#define SERVO3_PIN PB6 + +// +// Limit Switches +// +#define X_MIN_PIN PC13 +#define Y_MIN_PIN PE3 +#define Z_MIN_PIN PD7 +#define X_MAX_PIN PD8 +#define Y_MAX_PIN PB14 +#define Z_MAX_PIN PB13 + +#ifdef OPTION_Z2_ENDSTOP + #define Z2_MIN_PIN PD1 + #define Z2_MAX_PIN PB12 +#endif + +// +// Steppers +// +#if ENABLED(COREXY) + #define X_ENABLE_PIN PE0 + #define X_STEP_PIN PE1 + #define X_DIR_PIN PE2 + + #define Y_ENABLE_PIN PE6 + #define Y_STEP_PIN PE5 + #define Y_DIR_PIN PE4 +#else + #define X_ENABLE_PIN PE6 + #define X_STEP_PIN PE5 + #define X_DIR_PIN PE4 + + #define Y_ENABLE_PIN PE0 + #define Y_STEP_PIN PE1 + #define Y_DIR_PIN PE2 +#endif + +#define Z_ENABLE_PIN PD2 +#define Z_STEP_PIN PD3 +#define Z_DIR_PIN PD4 + +#ifdef OPTION_DUALZ_DRIVE + #define Z2_ENABLE_PIN PC11 + #define Z2_STEP_PIN PC12 + #define Z2_DIR_PIN PD0 +#endif + +#ifdef OPTION_REPEAT_PRINTING + #define REPRINT_STOP_PIN PD8 // X_MAX_PIN + #define FORWARD_PIN PA13 + #define BACK_PIN PA14 +#endif + +#ifdef SWITCH_EXTRUDER_SEQUENCE + #define E3_ENABLE_PIN PC10 + #define E3_STEP_PIN PA8 + #define E3_DIR_PIN PC9 + + #define E2_STEP_PIN PC6 + #define E2_DIR_PIN PD15 + #define E2_ENABLE_PIN PC7 + + #define E1_STEP_PIN PD13 + #define E1_DIR_PIN PD12 + #define E1_ENABLE_PIN PD14 + + #define E0_STEP_PIN PD10 + #define E0_DIR_PIN PD9 + #define E0_ENABLE_PIN PD11 +#else + #define E0_ENABLE_PIN PC10 + #define E0_STEP_PIN PA8 + #define E0_DIR_PIN PC9 + + #define E1_STEP_PIN PC6 + #define E1_DIR_PIN PD15 + #define E1_ENABLE_PIN PC7 + + #define E2_STEP_PIN PD13 + #define E2_DIR_PIN PD12 + #define E2_ENABLE_PIN PD14 + + #define E3_STEP_PIN PD10 + #define E3_DIR_PIN PD9 + #define E3_ENABLE_PIN PD11 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC2 // TH0 +//#define TEMP_1_PIN PC1 // TH1 +#define TEMP_BED_PIN PC3 // TB1 + +// +// Heaters +// +#define HEATER_0_PIN PC5 // HEATER0 +//#define HEATER_1_PIN PB0 // HEATER1 +#define HEATER_BED_PIN PA2 // HOT BED + +// +// Fans +// +#define FAN_PIN PB1 // FAN1 +#define FAN1_PIN PB8 // FAN2 + +// +// Misc. Functions +// +//#define POWER_LOSS_PIN PB15 +#define LED_PIN PA0 +#define SUICIDE_PIN PA3 +#define FIL_RUNOUT_PIN PC8 + +// +// SD card +// +#define ENABLE_SPI1 +#define SD_DETECT_PIN PC4 +#define SD_SCK_PIN PA5 +#define SD_MISO_PIN PA6 +#define SD_MOSI_PIN PA7 +#define SD_SS_PIN PA4 + +// WiFi Functions +#define WIFI_RST PC15 +#define WIFI_EN PC14 + +#if ENABLED(ZONESTAR_12864LCD) + #define LCDSCREEN_NAME "ZONESTAR LCD12864" + #define LCD_PINS_RS EXP1_08_PIN // 7 CS make sure for zonestar zm3e4! + #define LCD_PINS_ENABLE EXP1_05_PIN // 6 DATA make sure for zonestar zm3e4! + #define LCD_PINS_D4 EXP1_07_PIN // 8 SCK make sure for zonestar zm3e4! + #define BEEPER_PIN EXP1_09_PIN + #define KILL_PIN -1 // EXP1_10_PIN + #define BTN_EN1 EXP1_06_PIN + #define BTN_EN2 EXP1_03_PIN + #define BTN_ENC EXP1_04_PIN +#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define LCDSCREEN_NAME "REPRAPDISCOUNT LCD12864" + #define LCD_PINS_RS EXP2_08_PIN // 7 CS make sure for zonestar zm3e4! + #define LCD_PINS_ENABLE EXP2_05_PIN // 6 DATA make sure for zonestar zm3e4! + #define LCD_PINS_D4 EXP2_07_PIN // 8 SCK make sure for zonestar zm3e4! + #define BEEPER_PIN EXP2_10_PIN + #define KILL_PIN EXP2_09_PIN + #define BTN_EN1 EXP2_03_PIN + #define BTN_EN2 EXP2_06_PIN + #define BTN_ENC EXP2_04_PIN +#elif ENABLED(ZONESTAR_DWIN_LCD) + // Connect to EXP2 connector + #define LCDSCREEN_NAME "ZONESTAR DWIN LCD" + #define BEEPER_PIN EXP2_06_PIN // PE11 + #define KILL_PIN -1 // EXP1_10_PIN + #define BTN_EN2 EXP2_04_PIN // PE8 + #define BTN_EN1 EXP2_03_PIN // PE14 + #define BTN_ENC EXP2_05_PIN // PE15 +#endif + +#if HAS_MARLINUI_U8GLIB + #define BOARD_ST7920_DELAY_1 DELAY_NS(200) // Tclk_fall <200ns + #define BOARD_ST7920_DELAY_2 DELAY_NS(250) // Tdata_width >200ns + #define BOARD_ST7920_DELAY_3 DELAY_NS(200) // Tclk_rise <200ns +#endif + +// Remap SERVO0 PIN for BLTouch +#if ENABLED(BLTOUCH_ON_EXP1) + // BLTouch connected to EXP1 + #define BLTOUCH_PROBE_PIN EXP1_06_PIN + #define BLTOUCH_GND_PIN EXP1_04_PIN + #undef SERVO0_PIN + #define SERVO0_PIN EXP1_03_PIN +#elif ENABLED(BLTOUCH_ON_EXP2) + // BLTouch connected to EXP2 + #define BLTOUCH_PROBE_PIN EXP2_03_PIN + #define BLTOUCH_GND_PIN EXP2_04_PIN + #undef SERVO0_PIN + #define SERVO0_PIN EXP2_06_PIN +#else + #define BLTOUCH_PROBE_PIN PB13 // Z1_MAX +#endif diff --git a/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h b/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h index c4349d182bf9..d85bbf7bed95 100644 --- a/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h +++ b/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h @@ -223,13 +223,16 @@ #define BTN_ENC PH8 #endif +// +// SD card +// #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD #endif #define SOFTWARE_SPI #define SDSS PA15 -#define SS_PIN SDSS +#define SD_SS_PIN SDSS #define SD_SCK_PIN PC10 #define SD_MISO_PIN PC11 #define SD_MOSI_PIN PC12 diff --git a/buildroot/share/PlatformIO/ldscripts/ZONESTAR_ZM3E_256K.ld b/buildroot/share/PlatformIO/ldscripts/ZONESTAR_ZM3E_256K.ld new file mode 100644 index 000000000000..2404e7cac9bc --- /dev/null +++ b/buildroot/share/PlatformIO/ldscripts/ZONESTAR_ZM3E_256K.ld @@ -0,0 +1,14 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40 + rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K - 4K +} + +/* Provide memory region aliases for common.inc */ +REGION_ALIAS("REGION_TEXT", rom); +REGION_ALIAS("REGION_DATA", ram); +REGION_ALIAS("REGION_BSS", ram); +REGION_ALIAS("REGION_RODATA", rom); + +/* Let common.inc handle the real work. */ +INCLUDE common.inc diff --git a/buildroot/share/PlatformIO/ldscripts/ZONESTAR_ZM3E_512K.ld b/buildroot/share/PlatformIO/ldscripts/ZONESTAR_ZM3E_512K.ld new file mode 100644 index 000000000000..821c8ebbfe38 --- /dev/null +++ b/buildroot/share/PlatformIO/ldscripts/ZONESTAR_ZM3E_512K.ld @@ -0,0 +1,14 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40 + rom (rx) : ORIGIN = 0x08005000, LENGTH = 512K - 20K - 4K +} + +/* Provide memory region aliases for common.inc */ +REGION_ALIAS("REGION_TEXT", rom); +REGION_ALIAS("REGION_DATA", ram); +REGION_ALIAS("REGION_BSS", ram); +REGION_ALIAS("REGION_RODATA", rom); + +/* Let common.inc handle the real work. */ +INCLUDE common.inc diff --git a/buildroot/tests/STM32F103RC_fysetc b/buildroot/tests/STM32F103RC_fysetc_maple similarity index 100% rename from buildroot/tests/STM32F103RC_fysetc rename to buildroot/tests/STM32F103RC_fysetc_maple diff --git a/buildroot/tests/STM32F103VE_ZM3E4V2_USB_maple b/buildroot/tests/STM32F103VE_ZM3E4V2_USB_maple new file mode 100755 index 000000000000..8cbb84fb807d --- /dev/null +++ b/buildroot/tests/STM32F103VE_ZM3E4V2_USB_maple @@ -0,0 +1,14 @@ +#!/usr/bin/env bash +# +# Build tests for STM32F103VE_ZM3E4V2_USB +# + +# exit on first failure +set -e + +restore_configs +opt_set MOTHERBOARD BOARD_ZONESTAR_ZM3E4V2 SERIAL_PORT 1 +exec_test $1 $2 "Zonestar ZM3E4 V2.0" "$3" + +# cleanup +restore_configs diff --git a/buildroot/tests/jgaurora_a5s_a1 b/buildroot/tests/jgaurora_a5s_a1_maple similarity index 100% rename from buildroot/tests/jgaurora_a5s_a1 rename to buildroot/tests/jgaurora_a5s_a1_maple diff --git a/buildroot/tests/mks_robin_lite b/buildroot/tests/mks_robin_lite_maple similarity index 100% rename from buildroot/tests/mks_robin_lite rename to buildroot/tests/mks_robin_lite_maple diff --git a/buildroot/tests/mks_robin_pro b/buildroot/tests/mks_robin_pro_maple similarity index 100% rename from buildroot/tests/mks_robin_pro rename to buildroot/tests/mks_robin_pro_maple diff --git a/ini/stm32f1-maple.ini b/ini/stm32f1-maple.ini index 0258fb3b7cc7..c184dc247c4a 100644 --- a/ini/stm32f1-maple.ini +++ b/ini/stm32f1-maple.ini @@ -357,3 +357,46 @@ extra_scripts = ${common_stm32f1.extra_scripts} buildroot/share/PlatformIO/scripts/custom_board.py build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4 + +# +# Zonestar ZM3E2 V1.0 / ZM3E4 V1.0 / ZM3E4 V2.0 +# +# STM32F103RC_ZM3E2_USB_maple ........... RCT6 with 256K +# STM32F103VC_ZM3E4_USB_maple ........... VCT6 with 256K +# STM32F103VE_ZM3E4V2_USB_maple ......... VET6 with 512K +# +[ZONESTAR_ZM3E_maple] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +platform_packages = tool-stm32duino +board_build.address = 0x08005000 +board_build.offset = 0x5000 +board_upload.maximum_size = 237568 +extra_scripts = ${common.extra_scripts} + buildroot/share/PlatformIO/scripts/custom_board.py + buildroot/share/PlatformIO/scripts/offset_and_rename.py +build_flags = ${common_stm32f1.build_flags} + -D__STM32F1__=1 -DDEBUG_LEVEL=0 -DSS_TIMER=4 -DSERIAL_USB +lib_deps = USBComposite for STM32F1@0.91 +lib_ignore = Adafruit NeoPixel, SPI, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster, TMCStepper + +[env:STM32F103RC_ZM3E2_USB_maple] +platform = ${ZONESTAR_ZM3E_maple.platform} +extends = ZONESTAR_ZM3E_maple +board = genericSTM32F103RC +board_build.ldscript = ZONESTAR_ZM3E_256K.ld + +[env:STM32F103VC_ZM3E4_USB_maple] +platform = ${ZONESTAR_ZM3E_maple.platform} +extends = ZONESTAR_ZM3E_maple +board = genericSTM32F103VC +board_build.ldscript = ZONESTAR_ZM3E_256K.ld +build_flags = ${ZONESTAR_ZM3E_maple.build_flags} -DTONE_TIMER=1 -DTONE_CHANNEL=2 + +[env:STM32F103VE_ZM3E4V2_USB_maple] +platform = ${ZONESTAR_ZM3E_maple.platform} +extends = ZONESTAR_ZM3E_maple +board = genericSTM32F103VE +board_build.ldscript = ZONESTAR_ZM3E_512K.ld +build_flags = ${ZONESTAR_ZM3E_maple.build_flags} -DTONE_TIMER=1 -DTONE_CHANNEL=2 +board_upload.maximum_size = 499712 diff --git a/ini/stm32f1.ini b/ini/stm32f1.ini index 1185e8f84d8a..d03898a12ee1 100644 --- a/ini/stm32f1.ini +++ b/ini/stm32f1.ini @@ -374,3 +374,43 @@ extra_scripts = ${stm32_variant.extra_scripts} platform = ${common_stm32.platform} extends = env:chitu_f103 build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX + +# +# Zonestar ZM3E2 V1.0 / ZM3E4 V1.0 / ZM3E4 V2.0 +# +# STM32F103RC_ZM3E2_USB ........... RCT6 with 256K +# STM32F103VC_ZM3E4_USB ........... VCT6 with 256K +# STM32F103VE_ZM3E4V2_USB ......... VET6 with 512K +# +[ZONESTAR_ZM3E] +platform = ${common_stm32.platform} +extends = stm32_variant +platform_packages = ${stm_flash_drive.platform_packages} +board_upload.offset_address = 0x08005000 +board_build.offset = 0x5000 +board_upload.maximum_size = 237568 +extra_scripts = ${stm32_variant.extra_scripts} +build_flags = ${common_stm32.build_flags} + -DSS_TIMER=4 -DTIMER_SERVO=TIM5 -DUSE_USB_FS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6 -DUSBD_USE_CDC_MSC +build_unflags = ${stm32_variant.build_unflags} -DUSBD_USE_CDC + +[env:STM32F103RC_ZM3E2_USB] +platform = ${ZONESTAR_ZM3E.platform} +extends = ZONESTAR_ZM3E +board = genericSTM32F103RC +board_build.variant = MARLIN_F103Rx + +[env:STM32F103VC_ZM3E4_USB] +platform = ${ZONESTAR_ZM3E.platform} +extends = ZONESTAR_ZM3E +board = genericSTM32F103VC +board_build.variant = MARLIN_F103Vx +build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=1 + +[env:STM32F103VE_ZM3E4V2_USB] +platform = ${ZONESTAR_ZM3E.platform} +extends = ZONESTAR_ZM3E +board = genericSTM32F103VE +board_build.variant = MARLIN_F103Vx +build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=1 +board_upload.maximum_size = 499712