diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 41f3f129e006..94c1d32e9e8b 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -779,13 +779,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 110 -#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 5c302ac2f5ef..b335f965624c 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -4862,32 +4862,32 @@ inline void gcode_M140() { case 0: if (code_seen('H')) { v = code_value_int(); - plaPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); + preheatHotendTemp1 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); } if (code_seen('F')) { v = code_value_int(); - plaPreheatFanSpeed = constrain(v, 0, 255); + preheatFanSpeed1 = constrain(v, 0, 255); } #if TEMP_SENSOR_BED != 0 if (code_seen('B')) { v = code_value_int(); - plaPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); + preheatBedTemp1 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); } #endif break; case 1: if (code_seen('H')) { v = code_value_int(); - absPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); + preheatHotendTemp2 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); } if (code_seen('F')) { v = code_value_int(); - absPreheatFanSpeed = constrain(v, 0, 255); + preheatFanSpeed2 = constrain(v, 0, 255); } #if TEMP_SENSOR_BED != 0 if (code_seen('B')) { v = code_value_int(); - absPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); + preheatBedTemp2 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); } #endif break; diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 9c251500a08a..3dc330885e06 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -632,6 +632,18 @@ #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead." #elif ENABLED(FILAMENTCHANGEENABLE) #error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration." +#elif defined(PLA_PREHEAT_HOTEND_TEMP) + #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration." +#elif defined(PLA_PREHEAT_HPB_TEMP) + #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration." +#elif defined(PLA_PREHEAT_FAN_SPEED) + #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration." +#elif defined(ABS_PREHEAT_HOTEND_TEMP) + #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration." +#elif defined(ABS_PREHEAT_HPB_TEMP) + #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration." +#elif defined(ABS_PREHEAT_FAN_SPEED) + #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration." #endif #endif //SANITYCHECK_H diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index 1af06ecd1e89..fd8d41b4bf89 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -85,12 +85,12 @@ * 285 M666 Z z_endstop_adj (float) * * ULTIPANEL: - * 289 M145 S0 H plaPreheatHotendTemp (int) - * 291 M145 S0 B plaPreheatHPBTemp (int) - * 293 M145 S0 F plaPreheatFanSpeed (int) - * 295 M145 S1 H absPreheatHotendTemp (int) - * 297 M145 S1 B absPreheatHPBTemp (int) - * 299 M145 S1 F absPreheatFanSpeed (int) + * 289 M145 S0 H preheatHotendTemp1 (int) + * 291 M145 S0 B preheatBedTemp1 (int) + * 293 M145 S0 F preheatFanSpeed1 (int) + * 295 M145 S1 H preheatHotendTemp2 (int) + * 297 M145 S1 B preheatBedTemp2 (int) + * 299 M145 S1 F preheatFanSpeed2 (int) * * PIDTEMP: * 301 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4) @@ -262,16 +262,16 @@ void Config_StoreSettings() { #endif #if DISABLED(ULTIPANEL) - int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED, - absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; + int preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND, preheatBedTemp1 = PREHEAT_1_TEMP_BED, preheatFanSpeed1 = PREHEAT_1_FAN_SPEED, + preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND, preheatBedTemp2 = PREHEAT_2_TEMP_BED, preheatFanSpeed2 = PREHEAT_2_FAN_SPEED; #endif // !ULTIPANEL - EEPROM_WRITE_VAR(i, plaPreheatHotendTemp); - EEPROM_WRITE_VAR(i, plaPreheatHPBTemp); - EEPROM_WRITE_VAR(i, plaPreheatFanSpeed); - EEPROM_WRITE_VAR(i, absPreheatHotendTemp); - EEPROM_WRITE_VAR(i, absPreheatHPBTemp); - EEPROM_WRITE_VAR(i, absPreheatFanSpeed); + EEPROM_WRITE_VAR(i, preheatHotendTemp1); + EEPROM_WRITE_VAR(i, preheatBedTemp1); + EEPROM_WRITE_VAR(i, preheatFanSpeed1); + EEPROM_WRITE_VAR(i, preheatHotendTemp2); + EEPROM_WRITE_VAR(i, preheatBedTemp2); + EEPROM_WRITE_VAR(i, preheatFanSpeed2); for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { @@ -447,16 +447,16 @@ void Config_RetrieveSettings() { #endif #if DISABLED(ULTIPANEL) - int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed, - absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed; + int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1, + preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2; #endif - EEPROM_READ_VAR(i, plaPreheatHotendTemp); - EEPROM_READ_VAR(i, plaPreheatHPBTemp); - EEPROM_READ_VAR(i, plaPreheatFanSpeed); - EEPROM_READ_VAR(i, absPreheatHotendTemp); - EEPROM_READ_VAR(i, absPreheatHPBTemp); - EEPROM_READ_VAR(i, absPreheatFanSpeed); + EEPROM_READ_VAR(i, preheatHotendTemp1); + EEPROM_READ_VAR(i, preheatBedTemp1); + EEPROM_READ_VAR(i, preheatFanSpeed1); + EEPROM_READ_VAR(i, preheatHotendTemp2); + EEPROM_READ_VAR(i, preheatBedTemp2); + EEPROM_READ_VAR(i, preheatFanSpeed2); #if ENABLED(PIDTEMP) for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { @@ -604,12 +604,12 @@ void Config_ResetDefault() { #endif #if ENABLED(ULTIPANEL) - plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP; - plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP; - plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED; - absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP; - absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP; - absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; + preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND; + preheatBedTemp1 = PREHEAT_1_TEMP_BED; + preheatFanSpeed1 = PREHEAT_1_FAN_SPEED; + preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND; + preheatBedTemp2 = PREHEAT_2_TEMP_BED; + preheatFanSpeed2 = PREHEAT_2_FAN_SPEED; #endif #if HAS_LCD_CONTRAST @@ -814,14 +814,14 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOLNPGM("Material heatup parameters:"); CONFIG_ECHO_START; } - SERIAL_ECHOPAIR(" M145 S0 H", plaPreheatHotendTemp); - SERIAL_ECHOPAIR(" B", plaPreheatHPBTemp); - SERIAL_ECHOPAIR(" F", plaPreheatFanSpeed); + SERIAL_ECHOPAIR(" M145 S0 H", preheatHotendTemp1); + SERIAL_ECHOPAIR(" B", preheatBedTemp1); + SERIAL_ECHOPAIR(" F", preheatFanSpeed1); SERIAL_EOL; CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M145 S1 H", absPreheatHotendTemp); - SERIAL_ECHOPAIR(" B", absPreheatHPBTemp); - SERIAL_ECHOPAIR(" F", absPreheatFanSpeed); + SERIAL_ECHOPAIR(" M145 S1 H", preheatHotendTemp2); + SERIAL_ECHOPAIR(" B", preheatBedTemp2); + SERIAL_ECHOPAIR(" F", preheatFanSpeed2); SERIAL_EOL; #endif // ULTIPANEL diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 3545e5994c32..a875ecce6602 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -778,13 +778,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 190 -#define PLA_PREHEAT_HPB_TEMP 50 -#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 50 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 110 -#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 737aad19b646..d3543127f85c 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -762,13 +762,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index f2b35df5cd10..097c1e2ee8dd 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -760,13 +760,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index a8dc026f54a8..ad3d59088a7e 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -771,13 +771,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 200 -#define PLA_PREHEAT_HPB_TEMP 0 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 0 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 220 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 05e6de775f3c..0d6252eabd89 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -773,13 +773,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 210 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 110 -#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 0e2a4d2c8af4..2a1ed29817a1 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -796,13 +796,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 190 -#define PLA_PREHEAT_HPB_TEMP 50 // K8200: set back to 70 if you have an upgraded heatbed power supply -#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 50 // K8200: set back to 70 if you have an upgraded heatbed power supply +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 60 // K8200: set back to 110 if you have an upgraded heatbed power supply -#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 60 // K8200: set back to 110 if you have an upgraded heatbed power supply +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index 17e5c28719d7..6cec00cb21bc 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -779,13 +779,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 210 -#define PLA_PREHEAT_HPB_TEMP 0 -#define PLA_PREHEAT_FAN_SPEED 165 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 0 +#define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 245 -#define ABS_PREHEAT_HPB_TEMP 0 -#define ABS_PREHEAT_FAN_SPEED 165 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 0 +#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/K8400/Dual Heads/Configuration.h b/Marlin/example_configurations/K8400/Dual Heads/Configuration.h index 2d706afffe5c..2dc75368a7f3 100644 --- a/Marlin/example_configurations/K8400/Dual Heads/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual Heads/Configuration.h @@ -779,13 +779,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 210 -#define PLA_PREHEAT_HPB_TEMP 0 -#define PLA_PREHEAT_FAN_SPEED 165 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 0 +#define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 245 -#define ABS_PREHEAT_HPB_TEMP 0 -#define ABS_PREHEAT_FAN_SPEED 165 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 0 +#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 6b073db8f3c3..ab6c8dcd91ea 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -779,13 +779,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 110 -#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index d097b0a20d77..f24a4ea07679 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -777,13 +777,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 110 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 297b311394b1..b8addb287196 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -787,13 +787,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 6db6caf30c10..e2782de05ec0 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -800,13 +800,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 230 -#define ABS_PREHEAT_HPB_TEMP 110 -#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index c71f965b1d0c..06a5ae8fb95f 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -771,13 +771,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 200 -#define PLA_PREHEAT_HPB_TEMP 0 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 0 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 220 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index ff9bbf244c4c..be81a9a2e7c8 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -779,13 +779,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 110 -#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index 01d21032c77f..5cc2ed9d1836 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -874,13 +874,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index ad48fedc950d..31d6b3551f25 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -868,13 +868,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index d7fa60cbb850..2699a97f455a 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -871,13 +871,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index f3753c75433c..dddb9c4357fe 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -871,13 +871,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 7c46535525af..58b162635733 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -873,13 +873,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index ac4d1d888fe1..9a4be404e47c 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -782,13 +782,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 1d137d3b7a93..a135d4d7b8dc 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -773,13 +773,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // @section temperature // Preheat Constants -#define PLA_PREHEAT_HOTEND_TEMP 180 -#define PLA_PREHEAT_HPB_TEMP 70 -#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 100 -#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 // // Print job timer diff --git a/Marlin/language_an.h b/Marlin/language_an.h index 37ae982e1965..2423275d9896 100644 --- a/Marlin/language_an.h +++ b/Marlin/language_an.h @@ -48,16 +48,16 @@ #define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "Establir zero" -#define MSG_PREHEAT_PLA "Precalentar PLA" -#define MSG_PREHEAT_PLA_N "Precalentar PLA " -#define MSG_PREHEAT_PLA_ALL "Precalentar PLA a" -#define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base" -#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA" -#define MSG_PREHEAT_ABS "Precalentar ABS" -#define MSG_PREHEAT_ABS_N "Precalentar ABS " -#define MSG_PREHEAT_ABS_ALL "Precalentar ABS a" -#define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base" -#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS" +#define MSG_PREHEAT_1 "Precalentar PLA" +#define MSG_PREHEAT_1_N "Precalentar PLA " +#define MSG_PREHEAT_1_ALL "Precalentar PLA a" +#define MSG_PREHEAT_1_BEDONLY "Prec. PLA Base" +#define MSG_PREHEAT_1_SETTINGS "Achustar tem. PLA" +#define MSG_PREHEAT_2 "Precalentar ABS" +#define MSG_PREHEAT_2_N "Precalentar ABS " +#define MSG_PREHEAT_2_ALL "Precalentar ABS a" +#define MSG_PREHEAT_2_BEDONLY "Prec. ABS Base" +#define MSG_PREHEAT_2_SETTINGS "Achustar tem. ABS" #define MSG_COOLDOWN "Enfriar" #define MSG_SWITCH_PS_ON "Enchegar Fuent" #define MSG_SWITCH_PS_OFF "Desenchegar Fuent" diff --git a/Marlin/language_bg.h b/Marlin/language_bg.h index 3fc7a5bee78f..8b42904673ea 100644 --- a/Marlin/language_bg.h +++ b/Marlin/language_bg.h @@ -49,16 +49,16 @@ #define MSG_SET_HOME_OFFSETS "Задай Начало" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "Изходна точка" -#define MSG_PREHEAT_PLA "Подгряване PLA" -#define MSG_PREHEAT_PLA_N "Подгряване PLA" -#define MSG_PREHEAT_PLA_ALL "Подгр. PLA Всички" -#define MSG_PREHEAT_PLA_BEDONLY "Подгр. PLA Легло" -#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA" -#define MSG_PREHEAT_ABS "Подгряване ABS" -#define MSG_PREHEAT_ABS_N "Подгряване ABS" -#define MSG_PREHEAT_ABS_ALL "Подгр. ABS Всички" -#define MSG_PREHEAT_ABS_BEDONLY "Подгр. ABS Легло" -#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS" +#define MSG_PREHEAT_1 "Подгряване PLA" +#define MSG_PREHEAT_1_N "Подгряване PLA" +#define MSG_PREHEAT_1_ALL "Подгр. PLA Всички" +#define MSG_PREHEAT_1_BEDONLY "Подгр. PLA Легло" +#define MSG_PREHEAT_1_SETTINGS "Настройки PLA" +#define MSG_PREHEAT_2 "Подгряване ABS" +#define MSG_PREHEAT_2_N "Подгряване ABS" +#define MSG_PREHEAT_2_ALL "Подгр. ABS Всички" +#define MSG_PREHEAT_2_BEDONLY "Подгр. ABS Легло" +#define MSG_PREHEAT_2_SETTINGS "Настройки ABS" #define MSG_COOLDOWN "Охлаждане" #define MSG_SWITCH_PS_ON "Вкл. захранване" #define MSG_SWITCH_PS_OFF "Изкл. захранване" diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h index 1c2e4924be6e..27f9ff475d8f 100644 --- a/Marlin/language_ca.h +++ b/Marlin/language_ca.h @@ -49,16 +49,16 @@ #define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "Establir origen" -#define MSG_PREHEAT_PLA "Preescalfar PLA" -#define MSG_PREHEAT_PLA_N "Preescalfar PLA " -#define MSG_PREHEAT_PLA_ALL "Preesc. tot PLA" -#define MSG_PREHEAT_PLA_BEDONLY "Preesc. llit PLA" -#define MSG_PREHEAT_PLA_SETTINGS "Configuració PLA" -#define MSG_PREHEAT_ABS "Preescalfar ABS" -#define MSG_PREHEAT_ABS_N "Preescalfar ABS " -#define MSG_PREHEAT_ABS_ALL "Preesc. tot ABS" -#define MSG_PREHEAT_ABS_BEDONLY "Preesc. llit ABS" -#define MSG_PREHEAT_ABS_SETTINGS "Configuració ABS" +#define MSG_PREHEAT_1 "Preescalfar PLA" +#define MSG_PREHEAT_1_N "Preescalfar PLA " +#define MSG_PREHEAT_1_ALL "Preesc. tot PLA" +#define MSG_PREHEAT_1_BEDONLY "Preesc. llit PLA" +#define MSG_PREHEAT_1_SETTINGS "Configuració PLA" +#define MSG_PREHEAT_2 "Preescalfar ABS" +#define MSG_PREHEAT_2_N "Preescalfar ABS " +#define MSG_PREHEAT_2_ALL "Preesc. tot ABS" +#define MSG_PREHEAT_2_BEDONLY "Preesc. llit ABS" +#define MSG_PREHEAT_2_SETTINGS "Configuració ABS" #define MSG_COOLDOWN "Refredar" #define MSG_SWITCH_PS_ON "Switch power on" #define MSG_SWITCH_PS_OFF "Switch power off" diff --git a/Marlin/language_cn.h b/Marlin/language_cn.h index de52af44fff4..dc102d7bf60f 100644 --- a/Marlin/language_cn.h +++ b/Marlin/language_cn.h @@ -45,16 +45,16 @@ #define MSG_SET_HOME_OFFSETS "\xbe\xbf\xbb\xbc\xbd\xc0\xc1" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "\xbe\xbf\xbc\xbd" -#define MSG_PREHEAT_PLA "\xc3\xc4 PLA" -#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " -#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " \xc5\xc6" -#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " \xc4\xc7" -#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " \xbe\xbf" -#define MSG_PREHEAT_ABS "\xc3\xc4 ABS" -#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " -#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xc5\xc6" -#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xbe\xc6" -#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " \xbe\xbf" +#define MSG_PREHEAT_1 "\xc3\xc4 PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " \xc5\xc6" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " \xc4\xc7" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " \xbe\xbf" +#define MSG_PREHEAT_2 "\xc3\xc4 ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " \xc5\xc6" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " \xbe\xc6" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " \xbe\xbf" #define MSG_COOLDOWN "\xc8\xc9" #define MSG_SWITCH_PS_ON "\xb9\xcb\xca\xb3" #define MSG_SWITCH_PS_OFF "\xb9\xcb\xb5\xb6" diff --git a/Marlin/language_cz.h b/Marlin/language_cz.h index 030b92e85e19..461c41a05384 100644 --- a/Marlin/language_cz.h +++ b/Marlin/language_cz.h @@ -57,16 +57,16 @@ #define MSG_SET_HOME_OFFSETS "Nastavit ofsety" #define MSG_HOME_OFFSETS_APPLIED "Ofsety nastaveny" #define MSG_SET_ORIGIN "Nastavit pocatek" -#define MSG_PREHEAT_PLA "Zahrat PLA" -#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " -#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Vse" -#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Podloz" -#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " Nast" -#define MSG_PREHEAT_ABS "Zahrat ABS" -#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " -#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Vse" -#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Podloz" -#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " Nast" +#define MSG_PREHEAT_1 "Zahrat PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Vse" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Podloz" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " Nast" +#define MSG_PREHEAT_2 "Zahrat ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Vse" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Podloz" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " Nast" #define MSG_H1 "1" #define MSG_H2 "2" #define MSG_H3 "3" diff --git a/Marlin/language_da.h b/Marlin/language_da.h index 55c9fd48c6b5..833a6b26a80b 100644 --- a/Marlin/language_da.h +++ b/Marlin/language_da.h @@ -54,16 +54,16 @@ #define MSG_SET_HOME_OFFSETS "Sæt forskyding af home" #define MSG_HOME_OFFSETS_APPLIED "Forskydninger af home pos. er tilføjet" #define MSG_SET_ORIGIN "Sæt origin" -#define MSG_PREHEAT_PLA "Forvarm PLA" -#define MSG_PREHEAT_PLA_N "Forvarm PLA " -#define MSG_PREHEAT_PLA_ALL "Forvarm PLA Alle" -#define MSG_PREHEAT_PLA_BEDONLY "Forvarm PLA Bed" -#define MSG_PREHEAT_PLA_SETTINGS "Forvarm PLA conf" -#define MSG_PREHEAT_ABS "Forvarm ABS" -#define MSG_PREHEAT_ABS_N "Forvarm ABS " -#define MSG_PREHEAT_ABS_ALL "Forvarm ABS Alle" -#define MSG_PREHEAT_ABS_BEDONLY "Forvarm ABS Bed" -#define MSG_PREHEAT_ABS_SETTINGS "Forvarm ABS conf" +#define MSG_PREHEAT_1 "Forvarm PLA" +#define MSG_PREHEAT_1_N "Forvarm PLA " +#define MSG_PREHEAT_1_ALL "Forvarm PLA Alle" +#define MSG_PREHEAT_1_BEDONLY "Forvarm PLA Bed" +#define MSG_PREHEAT_1_SETTINGS "Forvarm PLA conf" +#define MSG_PREHEAT_2 "Forvarm ABS" +#define MSG_PREHEAT_2_N "Forvarm ABS " +#define MSG_PREHEAT_2_ALL "Forvarm ABS Alle" +#define MSG_PREHEAT_2_BEDONLY "Forvarm ABS Bed" +#define MSG_PREHEAT_2_SETTINGS "Forvarm ABS conf" #define MSG_H1 "1" #define MSG_H2 "2" #define MSG_H3 "3" diff --git a/Marlin/language_de.h b/Marlin/language_de.h index 58acd952783c..3077e6b4584f 100644 --- a/Marlin/language_de.h +++ b/Marlin/language_de.h @@ -49,16 +49,16 @@ #define MSG_SET_HOME_OFFSETS "Setze Homeoffsets" #define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv" #define MSG_SET_ORIGIN "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp -#define MSG_PREHEAT_PLA "Vorwärmen PLA" -#define MSG_PREHEAT_PLA_N "Vorwärmen PLA " -#define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle" -#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett" -#define MSG_PREHEAT_PLA_SETTINGS "Vorw. PLA Einst." -#define MSG_PREHEAT_ABS "Vorwärmen ABS" -#define MSG_PREHEAT_ABS_N "Vorwärmen ABS " -#define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle" -#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett" -#define MSG_PREHEAT_ABS_SETTINGS "Vorw. ABS Einst." +#define MSG_PREHEAT_1 "Vorwärmen PLA" +#define MSG_PREHEAT_1_N "Vorwärmen PLA " +#define MSG_PREHEAT_1_ALL "Vorw. PLA Alle" +#define MSG_PREHEAT_1_BEDONLY "Vorw. PLA Bett" +#define MSG_PREHEAT_1_SETTINGS "Vorw. PLA Einst." +#define MSG_PREHEAT_2 "Vorwärmen ABS" +#define MSG_PREHEAT_2_N "Vorwärmen ABS " +#define MSG_PREHEAT_2_ALL "Vorw. ABS Alle" +#define MSG_PREHEAT_2_BEDONLY "Vorw. ABS Bett" +#define MSG_PREHEAT_2_SETTINGS "Vorw. ABS Einst." #define MSG_COOLDOWN "Abkühlen" #define MSG_SWITCH_PS_ON "Netzteil ein" #define MSG_SWITCH_PS_OFF "Netzteil aus" diff --git a/Marlin/language_en.h b/Marlin/language_en.h index a1612bdf2190..ef602209425a 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -92,35 +92,35 @@ #ifndef MSG_SET_ORIGIN #define MSG_SET_ORIGIN "Set origin" #endif -#ifndef MSG_PREHEAT_PLA - #define MSG_PREHEAT_PLA "Preheat PLA" +#ifndef MSG_PREHEAT_1 + #define MSG_PREHEAT_1 "Preheat PLA" #endif -#ifndef MSG_PREHEAT_PLA_N - #define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " +#ifndef MSG_PREHEAT_1_N + #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " #endif -#ifndef MSG_PREHEAT_PLA_ALL - #define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All" +#ifndef MSG_PREHEAT_1_ALL + #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " All" #endif -#ifndef MSG_PREHEAT_PLA_BEDONLY - #define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed" +#ifndef MSG_PREHEAT_1_BEDONLY + #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Bed" #endif -#ifndef MSG_PREHEAT_PLA_SETTINGS - #define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " conf" +#ifndef MSG_PREHEAT_1_SETTINGS + #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf" #endif -#ifndef MSG_PREHEAT_ABS - #define MSG_PREHEAT_ABS "Preheat ABS" +#ifndef MSG_PREHEAT_2 + #define MSG_PREHEAT_2 "Preheat ABS" #endif -#ifndef MSG_PREHEAT_ABS_N - #define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " +#ifndef MSG_PREHEAT_2_N + #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " #endif -#ifndef MSG_PREHEAT_ABS_ALL - #define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All" +#ifndef MSG_PREHEAT_2_ALL + #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " All" #endif -#ifndef MSG_PREHEAT_ABS_BEDONLY - #define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed" +#ifndef MSG_PREHEAT_2_BEDONLY + #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Bed" #endif -#ifndef MSG_PREHEAT_ABS_SETTINGS - #define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " conf" +#ifndef MSG_PREHEAT_2_SETTINGS + #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf" #endif #ifndef MSG_H1 #define MSG_H1 "1" diff --git a/Marlin/language_es.h b/Marlin/language_es.h index c5b3e0e7a4ba..8647a50faf8e 100644 --- a/Marlin/language_es.h +++ b/Marlin/language_es.h @@ -52,16 +52,16 @@ #define MSG_SET_HOME_OFFSETS "Ajustar desfases" #define MSG_HOME_OFFSETS_APPLIED "Desfase aplicado" #define MSG_SET_ORIGIN "Establecer origen" -#define MSG_PREHEAT_PLA "Precalentar PLA" -#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " -#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA "Todo" -#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA"Plataforma" -#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA "Config" -#define MSG_PREHEAT_ABS "Precalentar ABS" -#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " -#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS "Todo" -#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS "Plataforma" -#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS "Config" +#define MSG_PREHEAT_1 "Precalentar PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 "Todo" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1"Plataforma" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 "Config" +#define MSG_PREHEAT_2 "Precalentar ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 "Todo" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 "Plataforma" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 "Config" #define MSG_H1 "1" #define MSG_H2 "2" #define MSG_H3 "3" diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h index 361fe0c4575f..2b246e20d04a 100644 --- a/Marlin/language_eu.h +++ b/Marlin/language_eu.h @@ -48,16 +48,16 @@ #define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "Hasiera ipini" -#define MSG_PREHEAT_PLA "Aurreberotu PLA" -#define MSG_PREHEAT_PLA_N "Aurreberotu PLA " -#define MSG_PREHEAT_PLA_ALL "Berotu PLA Guztia" -#define MSG_PREHEAT_PLA_BEDONLY "Berotu PLA Ohea" -#define MSG_PREHEAT_PLA_SETTINGS "Berotu PLA Konfig" -#define MSG_PREHEAT_ABS "Aurreberotu ABS" -#define MSG_PREHEAT_ABS_N "Aurreberotu ABS " -#define MSG_PREHEAT_ABS_ALL "Berotu ABS Guztia" -#define MSG_PREHEAT_ABS_BEDONLY "Berotu ABS Ohea" -#define MSG_PREHEAT_ABS_SETTINGS "Berotu ABS Konfig" +#define MSG_PREHEAT_1 "Aurreberotu PLA" +#define MSG_PREHEAT_1_N "Aurreberotu PLA " +#define MSG_PREHEAT_1_ALL "Berotu PLA Guztia" +#define MSG_PREHEAT_1_BEDONLY "Berotu PLA Ohea" +#define MSG_PREHEAT_1_SETTINGS "Berotu PLA Konfig" +#define MSG_PREHEAT_2 "Aurreberotu ABS" +#define MSG_PREHEAT_2_N "Aurreberotu ABS " +#define MSG_PREHEAT_2_ALL "Berotu ABS Guztia" +#define MSG_PREHEAT_2_BEDONLY "Berotu ABS Ohea" +#define MSG_PREHEAT_2_SETTINGS "Berotu ABS Konfig" #define MSG_COOLDOWN "Hoztu" #define MSG_SWITCH_PS_ON "Energia piztu" #define MSG_SWITCH_PS_OFF "Energia itzali" diff --git a/Marlin/language_fi.h b/Marlin/language_fi.h index be3db646c581..f3f4db27e806 100644 --- a/Marlin/language_fi.h +++ b/Marlin/language_fi.h @@ -49,16 +49,16 @@ #define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "Aseta origo" -#define MSG_PREHEAT_PLA "Esilämmitä PLA" -#define MSG_PREHEAT_PLA_N "Esilämmitä PLA " -#define MSG_PREHEAT_PLA_ALL "Esilä. PLA Kaikki" -#define MSG_PREHEAT_PLA_BEDONLY "Esilä. PLA Alusta" -#define MSG_PREHEAT_PLA_SETTINGS "Esilämm. PLA konf" -#define MSG_PREHEAT_ABS "Esilämmitä ABS" -#define MSG_PREHEAT_ABS_N "Esilämmitä ABS " -#define MSG_PREHEAT_ABS_ALL "Esilä. ABS Kaikki" -#define MSG_PREHEAT_ABS_BEDONLY "Esilä. ABS Alusta" -#define MSG_PREHEAT_ABS_SETTINGS "Esilämm. ABS konf" +#define MSG_PREHEAT_1 "Esilämmitä PLA" +#define MSG_PREHEAT_1_N "Esilämmitä PLA " +#define MSG_PREHEAT_1_ALL "Esilä. PLA Kaikki" +#define MSG_PREHEAT_1_BEDONLY "Esilä. PLA Alusta" +#define MSG_PREHEAT_1_SETTINGS "Esilämm. PLA konf" +#define MSG_PREHEAT_2 "Esilämmitä ABS" +#define MSG_PREHEAT_2_N "Esilämmitä ABS " +#define MSG_PREHEAT_2_ALL "Esilä. ABS Kaikki" +#define MSG_PREHEAT_2_BEDONLY "Esilä. ABS Alusta" +#define MSG_PREHEAT_2_SETTINGS "Esilämm. ABS konf" #define MSG_COOLDOWN "Jäähdytä" #define MSG_SWITCH_PS_ON "Virta päälle" #define MSG_SWITCH_PS_OFF "Virta pois" diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h index 63bba3c3ff7b..30c45e78a248 100644 --- a/Marlin/language_fr.h +++ b/Marlin/language_fr.h @@ -48,16 +48,16 @@ #define MSG_SET_HOME_OFFSETS "Regler decal. origine" #define MSG_HOME_OFFSETS_APPLIED "Decalages appliques" #define MSG_SET_ORIGIN "Regler origine" -#define MSG_PREHEAT_PLA "Prechauffage PLA" -#define MSG_PREHEAT_PLA_N "Prechauff. PLA " -#define MSG_PREHEAT_PLA_ALL "Prech. PLA Tout" -#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau" -#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA" -#define MSG_PREHEAT_ABS "Prechauffage ABS" -#define MSG_PREHEAT_ABS_N "Prechauff. ABS " -#define MSG_PREHEAT_ABS_ALL "Prech. ABS Tout" -#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau" -#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS" +#define MSG_PREHEAT_1 "Prechauffage PLA" +#define MSG_PREHEAT_1_N "Prechauff. PLA " +#define MSG_PREHEAT_1_ALL "Prech. PLA Tout" +#define MSG_PREHEAT_1_BEDONLY "Prech. PLA Plateau" +#define MSG_PREHEAT_1_SETTINGS "Regl. prech. PLA" +#define MSG_PREHEAT_2 "Prechauffage ABS" +#define MSG_PREHEAT_2_N "Prechauff. ABS " +#define MSG_PREHEAT_2_ALL "Prech. ABS Tout" +#define MSG_PREHEAT_2_BEDONLY "Prech. ABS Plateau" +#define MSG_PREHEAT_2_SETTINGS "Regl. prech. ABS" #define MSG_COOLDOWN "Refroidir" #define MSG_SWITCH_PS_ON "Allumer alim." #define MSG_SWITCH_PS_OFF "Eteindre alim." diff --git a/Marlin/language_gl.h b/Marlin/language_gl.h index f4e4639fc319..87453b81c864 100644 --- a/Marlin/language_gl.h +++ b/Marlin/language_gl.h @@ -54,16 +54,16 @@ #define MSG_SET_HOME_OFFSETS "Offsets na orixe" #define MSG_HOME_OFFSETS_APPLIED "Offsets fixados" #define MSG_SET_ORIGIN "Fixar orixe" -#define MSG_PREHEAT_PLA "Prequentar PLA" -#define MSG_PREHEAT_PLA_N "Prequentar PLA " -#define MSG_PREHEAT_PLA_ALL "Preque. PLA Todo" -#define MSG_PREHEAT_PLA_BEDONLY "Preque. PLA Cama" -#define MSG_PREHEAT_PLA_SETTINGS "Preque. PLA conf" -#define MSG_PREHEAT_ABS "Prequentar ABS" -#define MSG_PREHEAT_ABS_N "Prequentar ABS " -#define MSG_PREHEAT_ABS_ALL "Preque. ABS Todo" -#define MSG_PREHEAT_ABS_BEDONLY "Preque. ABS Cama" -#define MSG_PREHEAT_ABS_SETTINGS "Preque. ABS conf" +#define MSG_PREHEAT_1 "Prequentar PLA" +#define MSG_PREHEAT_1_N "Prequentar PLA " +#define MSG_PREHEAT_1_ALL "Preque. PLA Todo" +#define MSG_PREHEAT_1_BEDONLY "Preque. PLA Cama" +#define MSG_PREHEAT_1_SETTINGS "Preque. PLA conf" +#define MSG_PREHEAT_2 "Prequentar ABS" +#define MSG_PREHEAT_2_N "Prequentar ABS " +#define MSG_PREHEAT_2_ALL "Preque. ABS Todo" +#define MSG_PREHEAT_2_BEDONLY "Preque. ABS Cama" +#define MSG_PREHEAT_2_SETTINGS "Preque. ABS conf" #define MSG_H1 "1" #define MSG_H2 "2" #define MSG_H3 "3" diff --git a/Marlin/language_hr.h b/Marlin/language_hr.h index e6ebe7db80c7..83742ded9df8 100644 --- a/Marlin/language_hr.h +++ b/Marlin/language_hr.h @@ -54,16 +54,16 @@ #define MSG_SET_HOME_OFFSETS "Postavi home offsete" #define MSG_HOME_OFFSETS_APPLIED "Offsets postavljeni" #define MSG_SET_ORIGIN "Postavi ishodište" -#define MSG_PREHEAT_PLA "Predgrij PLA" -#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " -#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Sve" -#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed" -#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " conf" -#define MSG_PREHEAT_ABS "Predgrij ABS" -#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " -#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Sve" -#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed" -#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " conf" +#define MSG_PREHEAT_1 "Predgrij PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Sve" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Bed" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf" +#define MSG_PREHEAT_2 "Predgrij ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Sve" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Bed" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf" #define MSG_H1 "1" #define MSG_H2 "2" #define MSG_H3 "3" diff --git a/Marlin/language_it.h b/Marlin/language_it.h index a8e08391f07d..e393f59113e4 100644 --- a/Marlin/language_it.h +++ b/Marlin/language_it.h @@ -53,16 +53,16 @@ #define MSG_SET_HOME_OFFSETS "Imp. offset home" #define MSG_HOME_OFFSETS_APPLIED "Offset applicato" #define MSG_SET_ORIGIN "Imposta Origine" -#define MSG_PREHEAT_PLA "Preriscalda PLA" -#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " -#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Tutto" -#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Piatto" -#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " conf" -#define MSG_PREHEAT_ABS "Preriscalda ABS" -#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " -#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Tutto" -#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Piatto" -#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " conf" +#define MSG_PREHEAT_1 "Preriscalda PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Tutto" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Piatto" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf" +#define MSG_PREHEAT_2 "Preriscalda ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Tutto" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Piatto" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf" #define MSG_COOLDOWN "Raffredda" #define MSG_SWITCH_PS_ON "Accendi aliment." #define MSG_SWITCH_PS_OFF "Spegni aliment." diff --git a/Marlin/language_kana.h b/Marlin/language_kana.h index 3a824e9ae7cc..894bda043dc4 100644 --- a/Marlin/language_kana.h +++ b/Marlin/language_kana.h @@ -55,16 +55,16 @@ #define MSG_SET_HOME_OFFSETS "\xb7\xbc\xde\xad\xdd\xb5\xcc\xbe\xaf\xc4\xbe\xaf\xc3\xb2" // "ｷｼﾞｭﾝｵﾌｾｯﾄｾｯﾃｲ" ("Set home offsets") #define MSG_HOME_OFFSETS_APPLIED "\xb5\xcc\xbe\xaf\xc4\xb6\xde\xc3\xb7\xd6\xb3\xbb\xda\xcf\xbc\xc0" // "ｵﾌｾｯﾄｶﾞﾃｷﾖｳｻﾚﾏｼﾀ" ("Offsets applied") #define MSG_SET_ORIGIN "\xb7\xbc\xde\xad\xdd\xbe\xaf\xc4" // "ｷｼﾞｭﾝｾｯﾄ" ("Set origin") -#define MSG_PREHEAT_PLA "PLA \xd6\xc8\xc2" // "PLA ﾖﾈﾂ" ("Preheat PLA") -#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " -#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " \xbd\xcd\xde\xc3" // " ｽﾍﾞﾃ" (" All") -#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " \xcd\xde\xaf\xc4\xde" // " ﾍﾞｯﾄﾞ" (" Bed") -#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " \xbe\xaf\xc3\xb2" // " ｾｯﾃｲ" (" conf") -#define MSG_PREHEAT_ABS "ABS \xd6\xc8\xc2" // "ABS ﾖﾈﾂ" ("Preheat ABS") -#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " -#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xbd\xcd\xde\xc3" // " ｽﾍﾞﾃ" (" All") -#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xcd\xde\xaf\xc4\xde" // " ﾍﾞｯﾄﾞ" (" Bed") -#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " \xbe\xaf\xc3\xb2" // " ｾｯﾃｲ" (" conf") +#define MSG_PREHEAT_1 "PLA \xd6\xc8\xc2" // "PLA ﾖﾈﾂ" ("Preheat PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " \xbd\xcd\xde\xc3" // " ｽﾍﾞﾃ" (" All") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " \xcd\xde\xaf\xc4\xde" // " ﾍﾞｯﾄﾞ" (" Bed") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " \xbe\xaf\xc3\xb2" // " ｾｯﾃｲ" (" conf") +#define MSG_PREHEAT_2 "ABS \xd6\xc8\xc2" // "ABS ﾖﾈﾂ" ("Preheat ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " \xbd\xcd\xde\xc3" // " ｽﾍﾞﾃ" (" All") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " \xcd\xde\xaf\xc4\xde" // " ﾍﾞｯﾄﾞ" (" Bed") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " \xbe\xaf\xc3\xb2" // " ｾｯﾃｲ" (" conf") #define MSG_COOLDOWN "\xb6\xc8\xc2\xc3\xb2\xbc" // "ｶﾈﾂﾃｲｼ" ("Cooldown") #define MSG_SWITCH_PS_ON "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xdd" // "ﾃﾞﾝｹﾞﾝ ｵﾝ" ("Switch power on") #define MSG_SWITCH_PS_OFF "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "ﾃﾞﾝｹﾞﾝ ｵﾌ" ("Switch power off") diff --git a/Marlin/language_kana_utf8.h b/Marlin/language_kana_utf8.h index 8a35e7cef8e1..b9121260708b 100644 --- a/Marlin/language_kana_utf8.h +++ b/Marlin/language_kana_utf8.h @@ -59,16 +59,16 @@ #define MSG_SET_HOME_OFFSETS "キジュンオフセットセッテイ" // "Set home offsets" #define MSG_HOME_OFFSETS_APPLIED "オフセットガテキヨウサレマシタ" // "Offsets applied" #define MSG_SET_ORIGIN "キジュンセット" // "Set origin" -#define MSG_PREHEAT_PLA "PLA ヨネツ" // "Preheat PLA" -#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " -#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " スベテ" // " All" -#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " ベッド" // " Bed" -#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " セッテイ" // " conf" -#define MSG_PREHEAT_ABS "ABS ヨネツ" // "Preheat ABS" -#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " -#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " スベテ" // " All" -#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " ベッド" // " Bed" -#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " セッテイ" // " conf" +#define MSG_PREHEAT_1 "PLA ヨネツ" // "Preheat PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " スベテ" // " All" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " ベッド" // " Bed" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " セッテイ" // " conf" +#define MSG_PREHEAT_2 "ABS ヨネツ" // "Preheat ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " スベテ" // " All" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " ベッド" // " Bed" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " セッテイ" // " conf" #define MSG_COOLDOWN "カネツテイシ" // "Cooldown" #define MSG_SWITCH_PS_ON "デンゲン オン" // "Switch power on" #define MSG_SWITCH_PS_OFF "デンゲン オフ" // "Switch power off" diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h index 4dd07d82e852..1b1f91877b46 100644 --- a/Marlin/language_nl.h +++ b/Marlin/language_nl.h @@ -48,16 +48,16 @@ #define MSG_SET_HOME_OFFSETS "Zet home offsets" #define MSG_HOME_OFFSETS_APPLIED "H offset toegep." #define MSG_SET_ORIGIN "Nulpunt instellen" -#define MSG_PREHEAT_PLA "PLA voorverwarmen" -#define MSG_PREHEAT_PLA_N "PLA voorverw. " -#define MSG_PREHEAT_PLA_ALL "PLA voorverw. aan" -#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed" -#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf" -#define MSG_PREHEAT_ABS "ABS voorverwarmen" -#define MSG_PREHEAT_ABS_N "ABS voorverw. " -#define MSG_PREHEAT_ABS_ALL "ABS voorverw. aan" -#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed" -#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf" +#define MSG_PREHEAT_1 "PLA voorverwarmen" +#define MSG_PREHEAT_1_N "PLA voorverw. " +#define MSG_PREHEAT_1_ALL "PLA voorverw. aan" +#define MSG_PREHEAT_1_BEDONLY "PLA voorverw. Bed" +#define MSG_PREHEAT_1_SETTINGS "PLA verw. conf" +#define MSG_PREHEAT_2 "ABS voorverwarmen" +#define MSG_PREHEAT_2_N "ABS voorverw. " +#define MSG_PREHEAT_2_ALL "ABS voorverw. aan" +#define MSG_PREHEAT_2_BEDONLY "ABS voorverw. Bed" +#define MSG_PREHEAT_2_SETTINGS "ABS verw. conf" #define MSG_COOLDOWN "Afkoelen" #define MSG_SWITCH_PS_ON "Stroom aan" #define MSG_SWITCH_PS_OFF "Stroom uit" diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h index 71d664c3c1f3..8df809b62b8a 100644 --- a/Marlin/language_pl.h +++ b/Marlin/language_pl.h @@ -50,16 +50,16 @@ #define MSG_SET_HOME_OFFSETS "Ust. poz. zer." #define MSG_HOME_OFFSETS_APPLIED "Poz. zerowa ust." #define MSG_SET_ORIGIN "Ustaw punkt zero" -#define MSG_PREHEAT_PLA "Rozgrzej PLA" -#define MSG_PREHEAT_PLA_N "Rozgrzej PLA " -#define MSG_PREHEAT_PLA_ALL "Roz. PLA Wszystko" -#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze" -#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA" -#define MSG_PREHEAT_ABS "Rozgrzej ABS" -#define MSG_PREHEAT_ABS_N "Rozgrzej ABS " -#define MSG_PREHEAT_ABS_ALL "Roz. ABS Wszystko" -#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze" -#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS" +#define MSG_PREHEAT_1 "Rozgrzej PLA" +#define MSG_PREHEAT_1_N "Rozgrzej PLA " +#define MSG_PREHEAT_1_ALL "Roz. PLA Wszystko" +#define MSG_PREHEAT_1_BEDONLY "Rozgrzej PLA Loze" +#define MSG_PREHEAT_1_SETTINGS "Ustaw. rozg. PLA" +#define MSG_PREHEAT_2 "Rozgrzej ABS" +#define MSG_PREHEAT_2_N "Rozgrzej ABS " +#define MSG_PREHEAT_2_ALL "Roz. ABS Wszystko" +#define MSG_PREHEAT_2_BEDONLY "Rozgrzej ABS Loze" +#define MSG_PREHEAT_2_SETTINGS "Ustaw. rozg. ABS" #define MSG_H1 "1" #define MSG_H2 "2" #define MSG_H3 "3" diff --git a/Marlin/language_pt-br.h b/Marlin/language_pt-br.h index e9f27ecc8008..c8914fc4e172 100644 --- a/Marlin/language_pt-br.h +++ b/Marlin/language_pt-br.h @@ -48,16 +48,16 @@ #define MSG_SET_HOME_OFFSETS "Ajustar Jogo" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "Ajustar orig." -#define MSG_PREHEAT_PLA "Pre-aquecer PLA" -#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA" -#define MSG_PREHEAT_PLA_ALL "Pre-aq.Todo PLA" -#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" -#define MSG_PREHEAT_PLA_SETTINGS "Ajustar PLA" -#define MSG_PREHEAT_ABS "Pre-aquecer ABS" -#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS" -#define MSG_PREHEAT_ABS_ALL "Pre-aq.Todo ABS" -#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" -#define MSG_PREHEAT_ABS_SETTINGS "Ajustar ABS" +#define MSG_PREHEAT_1 "Pre-aquecer PLA" +#define MSG_PREHEAT_1_N "Pre-aquecer PLA" +#define MSG_PREHEAT_1_ALL "Pre-aq.Todo PLA" +#define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_1_SETTINGS "Ajustar PLA" +#define MSG_PREHEAT_2 "Pre-aquecer ABS" +#define MSG_PREHEAT_2_N "Pre-aquecer ABS" +#define MSG_PREHEAT_2_ALL "Pre-aq.Todo ABS" +#define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_2_SETTINGS "Ajustar ABS" #define MSG_COOLDOWN "Esfriar" #define MSG_SWITCH_PS_ON "Ligar" #define MSG_SWITCH_PS_OFF "Desligar" diff --git a/Marlin/language_pt-br_utf8.h b/Marlin/language_pt-br_utf8.h index 2909b3d55241..48731438bf06 100644 --- a/Marlin/language_pt-br_utf8.h +++ b/Marlin/language_pt-br_utf8.h @@ -48,16 +48,16 @@ #define MSG_SET_HOME_OFFSETS "Ajustar Jogo" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "Ajustar orig." -#define MSG_PREHEAT_PLA "Pre-aquecer PLA" -#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA" -#define MSG_PREHEAT_PLA_ALL "Pre-aq.Todo PLA" -#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" -#define MSG_PREHEAT_PLA_SETTINGS "Ajustar PLA" -#define MSG_PREHEAT_ABS "Pre-aquecer ABS" -#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS" -#define MSG_PREHEAT_ABS_ALL "Pre-aq.Todo ABS" -#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" -#define MSG_PREHEAT_ABS_SETTINGS "Ajustar ABS" +#define MSG_PREHEAT_1 "Pre-aquecer PLA" +#define MSG_PREHEAT_1_N "Pre-aquecer PLA" +#define MSG_PREHEAT_1_ALL "Pre-aq.Todo PLA" +#define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_1_SETTINGS "Ajustar PLA" +#define MSG_PREHEAT_2 "Pre-aquecer ABS" +#define MSG_PREHEAT_2_N "Pre-aquecer ABS" +#define MSG_PREHEAT_2_ALL "Pre-aq.Todo ABS" +#define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_2_SETTINGS "Ajustar ABS" #define MSG_COOLDOWN "Esfriar" #define MSG_SWITCH_PS_ON "Ligar" #define MSG_SWITCH_PS_OFF "Desligar" diff --git a/Marlin/language_pt.h b/Marlin/language_pt.h index 2e88f11922ea..b7c562c20b44 100644 --- a/Marlin/language_pt.h +++ b/Marlin/language_pt.h @@ -52,16 +52,16 @@ #define MSG_SET_HOME_OFFSETS "Definir desvio" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "Definir origem" -#define MSG_PREHEAT_PLA "Pre-aquecer PLA" -#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA" -#define MSG_PREHEAT_PLA_ALL "Pre-aq. PLA Tudo" -#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" -#define MSG_PREHEAT_PLA_SETTINGS "Definicoes PLA" -#define MSG_PREHEAT_ABS "Pre-aquecer ABS" -#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS " -#define MSG_PREHEAT_ABS_ALL "Pre-aq. ABS Tudo" -#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" -#define MSG_PREHEAT_ABS_SETTINGS "Definicoes ABS" +#define MSG_PREHEAT_1 "Pre-aquecer PLA" +#define MSG_PREHEAT_1_N "Pre-aquecer PLA" +#define MSG_PREHEAT_1_ALL "Pre-aq. PLA Tudo" +#define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_1_SETTINGS "Definicoes PLA" +#define MSG_PREHEAT_2 "Pre-aquecer ABS" +#define MSG_PREHEAT_2_N "Pre-aquecer ABS " +#define MSG_PREHEAT_2_ALL "Pre-aq. ABS Tudo" +#define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_2_SETTINGS "Definicoes ABS" #define MSG_COOLDOWN "Arrefecer" #define MSG_SWITCH_PS_ON "Ligar" #define MSG_SWITCH_PS_OFF "Desligar" diff --git a/Marlin/language_pt_utf8.h b/Marlin/language_pt_utf8.h index 9040951b3f86..ac8b2440c6b8 100644 --- a/Marlin/language_pt_utf8.h +++ b/Marlin/language_pt_utf8.h @@ -52,16 +52,16 @@ #define MSG_SET_HOME_OFFSETS "Definir desvio" #define MSG_HOME_OFFSETS_APPLIED "Offsets aplicados" #define MSG_SET_ORIGIN "Definir origem" -#define MSG_PREHEAT_PLA "Pre-aquecer PLA" -#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA" -#define MSG_PREHEAT_PLA_ALL "Pre-aq. PLA Tudo" -#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" -#define MSG_PREHEAT_PLA_SETTINGS "Definições PLA" -#define MSG_PREHEAT_ABS "Pre-aquecer ABS" -#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS " -#define MSG_PREHEAT_ABS_ALL "Pre-aq. ABS Tudo" -#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" -#define MSG_PREHEAT_ABS_SETTINGS "Definições ABS" +#define MSG_PREHEAT_1 "Pre-aquecer PLA" +#define MSG_PREHEAT_1_N "Pre-aquecer PLA" +#define MSG_PREHEAT_1_ALL "Pre-aq. PLA Tudo" +#define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_1_SETTINGS "Definições PLA" +#define MSG_PREHEAT_2 "Pre-aquecer ABS" +#define MSG_PREHEAT_2_N "Pre-aquecer ABS " +#define MSG_PREHEAT_2_ALL "Pre-aq. ABS Tudo" +#define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_2_SETTINGS "Definições ABS" #define MSG_COOLDOWN "Arrefecer" #define MSG_SWITCH_PS_ON "Ligar" #define MSG_SWITCH_PS_OFF "Desligar" diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h index 4d0f976c9037..c86e34983384 100644 --- a/Marlin/language_ru.h +++ b/Marlin/language_ru.h @@ -49,16 +49,16 @@ #define MSG_SET_HOME_OFFSETS "Запомнить парковку" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_SET_ORIGIN "Запомнить ноль" -#define MSG_PREHEAT_PLA "Преднагрев PLA" -#define MSG_PREHEAT_PLA_N "Греть PLA Сопло " -#define MSG_PREHEAT_PLA_ALL "Греть PLA Все" -#define MSG_PREHEAT_PLA_BEDONLY "Греть PLA Стол" -#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA" -#define MSG_PREHEAT_ABS "Преднагрев ABS" -#define MSG_PREHEAT_ABS_N "Греть ABS Сопло " -#define MSG_PREHEAT_ABS_ALL "Греть ABS Все" -#define MSG_PREHEAT_ABS_BEDONLY "Греть ABS Стол" -#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS" +#define MSG_PREHEAT_1 "Преднагрев PLA" +#define MSG_PREHEAT_1_N "Греть PLA Сопло " +#define MSG_PREHEAT_1_ALL "Греть PLA Все" +#define MSG_PREHEAT_1_BEDONLY "Греть PLA Стол" +#define MSG_PREHEAT_1_SETTINGS "Настройки PLA" +#define MSG_PREHEAT_2 "Преднагрев ABS" +#define MSG_PREHEAT_2_N "Греть ABS Сопло " +#define MSG_PREHEAT_2_ALL "Греть ABS Все" +#define MSG_PREHEAT_2_BEDONLY "Греть ABS Стол" +#define MSG_PREHEAT_2_SETTINGS "Настройки ABS" #define MSG_COOLDOWN "Охлаждение" #define MSG_SWITCH_PS_ON "Включить Питание" #define MSG_SWITCH_PS_OFF "Отключить Питание" diff --git a/Marlin/language_test.h b/Marlin/language_test.h index ea1b0c4dbc3b..99fa712a7155 100644 --- a/Marlin/language_test.h +++ b/Marlin/language_test.h @@ -141,8 +141,8 @@ #define MSG_DISABLE_STEPPERS STRG_C2_8 #define MSG_AUTO_HOME STRG_C2_9 #define MSG_SET_HOME_OFFSETS STRG_C2_a - #define MSG_PREHEAT_PLA STRG_C2_b - #define MSG_PREHEAT_ABS STRG_C3_8 + #define MSG_PREHEAT_1 STRG_C2_b + #define MSG_PREHEAT_2 STRG_C3_8 #define MSG_COOLDOWN STRG_C3_9 #define MSG_SWITCH_PS_OFF STRG_C3_a #define MSG_MOVE_AXIS STRG_C3_b @@ -176,8 +176,8 @@ #define MSG_DISABLE_STEPPERS STRG_D0_8 #define MSG_AUTO_HOME STRG_D0_9 #define MSG_SET_HOME_OFFSETS STRG_D0_a - #define MSG_PREHEAT_PLA STRG_D0_b - #define MSG_PREHEAT_ABS STRG_D1_8 + #define MSG_PREHEAT_1 STRG_D0_b + #define MSG_PREHEAT_2 STRG_D1_8 #define MSG_COOLDOWN STRG_D1_9 #define MSG_SWITCH_PS_OFF STRG_D1_a #define MSG_MOVE_AXIS STRG_D1_b @@ -211,8 +211,8 @@ #define MSG_DISABLE_STEPPERS STRG_E382_8 #define MSG_AUTO_HOME STRG_E382_9 #define MSG_SET_HOME_OFFSETS STRG_E382_a - #define MSG_PREHEAT_PLA STRG_E382_b - #define MSG_PREHEAT_ABS STRG_E383_8 + #define MSG_PREHEAT_1 STRG_E382_b + #define MSG_PREHEAT_2 STRG_E383_8 #define MSG_COOLDOWN STRG_E383_9 #define MSG_SWITCH_PS_OFF STRG_E383_a #define MSG_MOVE_AXIS STRG_E383_b diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 00f9065c4beb..b1a34702da01 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -33,13 +33,8 @@ #include "printcounter.h" #endif -int plaPreheatHotendTemp; -int plaPreheatHPBTemp; -int plaPreheatFanSpeed; - -int absPreheatHotendTemp; -int absPreheatHPBTemp; -int absPreheatFanSpeed; +int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1, + preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2; #if ENABLED(FILAMENT_LCD_DISPLAY) millis_t previous_lcd_status_ms = 0; @@ -885,29 +880,29 @@ void kill_screen(const char* lcd_msg) { } #if TEMP_SENSOR_0 != 0 - void lcd_preheat_pla0() { _lcd_preheat(0, plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed); } - void lcd_preheat_abs0() { _lcd_preheat(0, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed); } + void lcd_preheat_pla0() { _lcd_preheat(0, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } + void lcd_preheat_abs0() { _lcd_preheat(0, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } #endif #if HOTENDS > 1 - void lcd_preheat_pla1() { _lcd_preheat(1, plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed); } - void lcd_preheat_abs1() { _lcd_preheat(1, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed); } + void lcd_preheat_pla1() { _lcd_preheat(1, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } + void lcd_preheat_abs1() { _lcd_preheat(1, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } #if HOTENDS > 2 - void lcd_preheat_pla2() { _lcd_preheat(2, plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed); } - void lcd_preheat_abs2() { _lcd_preheat(2, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed); } + void lcd_preheat_pla2() { _lcd_preheat(2, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } + void lcd_preheat_abs2() { _lcd_preheat(2, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } #if HOTENDS > 3 - void lcd_preheat_pla3() { _lcd_preheat(3, plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed); } - void lcd_preheat_abs3() { _lcd_preheat(3, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed); } + void lcd_preheat_pla3() { _lcd_preheat(3, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } + void lcd_preheat_abs3() { _lcd_preheat(3, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } #endif #endif void lcd_preheat_pla0123() { #if HOTENDS > 1 - thermalManager.setTargetHotend(plaPreheatHotendTemp, 1); + thermalManager.setTargetHotend(preheatHotendTemp1, 1); #if HOTENDS > 2 - thermalManager.setTargetHotend(plaPreheatHotendTemp, 2); + thermalManager.setTargetHotend(preheatHotendTemp1, 2); #if HOTENDS > 3 - thermalManager.setTargetHotend(plaPreheatHotendTemp, 3); + thermalManager.setTargetHotend(preheatHotendTemp1, 3); #endif #endif #endif @@ -915,11 +910,11 @@ void kill_screen(const char* lcd_msg) { } void lcd_preheat_abs0123() { #if HOTENDS > 1 - thermalManager.setTargetHotend(absPreheatHotendTemp, 1); + thermalManager.setTargetHotend(preheatHotendTemp2, 1); #if HOTENDS > 2 - thermalManager.setTargetHotend(absPreheatHotendTemp, 2); + thermalManager.setTargetHotend(preheatHotendTemp2, 2); #if HOTENDS > 3 - thermalManager.setTargetHotend(absPreheatHotendTemp, 3); + thermalManager.setTargetHotend(preheatHotendTemp2, 3); #endif #endif #endif @@ -929,8 +924,8 @@ void kill_screen(const char* lcd_msg) { #endif // HOTENDS > 1 #if TEMP_SENSOR_BED != 0 - void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, plaPreheatHPBTemp, plaPreheatFanSpeed); } - void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, absPreheatHPBTemp, absPreheatFanSpeed); } + void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, preheatBedTemp1, preheatFanSpeed1); } + void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, preheatBedTemp2, preheatFanSpeed2); } #endif #if TEMP_SENSOR_0 != 0 && (TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0) @@ -939,20 +934,20 @@ void kill_screen(const char* lcd_msg) { START_MENU(); MENU_ITEM(back, MSG_PREPARE); #if HOTENDS == 1 - MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0); + MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_pla0); #else - MENU_ITEM(function, MSG_PREHEAT_PLA_N MSG_H1, lcd_preheat_pla0); - MENU_ITEM(function, MSG_PREHEAT_PLA_N MSG_H2, lcd_preheat_pla1); + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_pla0); + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_pla1); #if HOTENDS > 2 - MENU_ITEM(function, MSG_PREHEAT_PLA_N MSG_H3, lcd_preheat_pla2); + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_pla2); #if HOTENDS > 3 - MENU_ITEM(function, MSG_PREHEAT_PLA_N MSG_H4, lcd_preheat_pla3); + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_pla3); #endif #endif - MENU_ITEM(function, MSG_PREHEAT_PLA_ALL, lcd_preheat_pla0123); + MENU_ITEM(function, MSG_PREHEAT_1_ALL, lcd_preheat_pla0123); #endif #if TEMP_SENSOR_BED != 0 - MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly); + MENU_ITEM(function, MSG_PREHEAT_1_BEDONLY, lcd_preheat_pla_bedonly); #endif END_MENU(); } @@ -961,20 +956,20 @@ void kill_screen(const char* lcd_msg) { START_MENU(); MENU_ITEM(back, MSG_PREPARE); #if HOTENDS == 1 - MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0); + MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_abs0); #else - MENU_ITEM(function, MSG_PREHEAT_ABS_N MSG_H1, lcd_preheat_abs0); - MENU_ITEM(function, MSG_PREHEAT_ABS_N MSG_H2, lcd_preheat_abs1); + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_abs0); + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_abs1); #if HOTENDS > 2 - MENU_ITEM(function, MSG_PREHEAT_ABS_N MSG_H3, lcd_preheat_abs2); + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_abs2); #if HOTENDS > 3 - MENU_ITEM(function, MSG_PREHEAT_ABS_N MSG_H4, lcd_preheat_abs3); + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_abs3); #endif #endif - MENU_ITEM(function, MSG_PREHEAT_ABS_ALL, lcd_preheat_abs0123); + MENU_ITEM(function, MSG_PREHEAT_2_ALL, lcd_preheat_abs0123); #endif #if TEMP_SENSOR_BED != 0 - MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly); + MENU_ITEM(function, MSG_PREHEAT_2_BEDONLY, lcd_preheat_abs_bedonly); #endif END_MENU(); } @@ -1250,11 +1245,11 @@ void kill_screen(const char* lcd_msg) { // #if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0 - MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu); - MENU_ITEM(submenu, MSG_PREHEAT_ABS, lcd_preheat_abs_menu); + MENU_ITEM(submenu, MSG_PREHEAT_1, lcd_preheat_pla_menu); + MENU_ITEM(submenu, MSG_PREHEAT_2, lcd_preheat_abs_menu); #else - MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0); - MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0); + MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_pla0); + MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_abs0); #endif #endif @@ -1713,12 +1708,12 @@ void kill_screen(const char* lcd_msg) { // // Preheat PLA conf // - MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu); + MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu); // // Preheat ABS conf // - MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu); + MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu); END_MENU(); } @@ -1730,12 +1725,12 @@ void kill_screen(const char* lcd_msg) { static void lcd_control_temperature_preheat_pla_settings_menu() { START_MENU(); MENU_ITEM(back, MSG_TEMPERATURE); - MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255); + MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed1, 0, 255); #if TEMP_SENSOR_0 != 0 - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp1, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); #endif #if TEMP_SENSOR_BED != 0 - MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15); + MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp1, BED_MINTEMP, BED_MAXTEMP - 15); #endif #if ENABLED(EEPROM_SETTINGS) MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); @@ -1751,12 +1746,12 @@ void kill_screen(const char* lcd_msg) { static void lcd_control_temperature_preheat_abs_settings_menu() { START_MENU(); MENU_ITEM(back, MSG_TEMPERATURE); - MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255); + MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed2, 0, 255); #if TEMP_SENSOR_0 != 0 - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp2, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); #endif #if TEMP_SENSOR_BED != 0 - MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15); + MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp2, BED_MINTEMP, BED_MAXTEMP - 15); #endif #if ENABLED(EEPROM_SETTINGS) MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index fde78c0b1fad..7a0080698d2a 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -90,12 +90,12 @@ FORCE_INLINE void lcd_buttons_update() {} #endif - extern int plaPreheatHotendTemp; - extern int plaPreheatHPBTemp; - extern int plaPreheatFanSpeed; - extern int absPreheatHotendTemp; - extern int absPreheatHPBTemp; - extern int absPreheatFanSpeed; + extern int preheatHotendTemp1; + extern int preheatBedTemp1; + extern int preheatFanSpeed1; + extern int preheatHotendTemp2; + extern int preheatBedTemp2; + extern int preheatFanSpeed2; #if ENABLED(FILAMENT_LCD_DISPLAY) extern millis_t previous_lcd_status_ms;