diff --git a/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h b/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
index c64d5b91a89ac..bc688451b84a5 100644
--- a/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
+++ b/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
@@ -200,8 +200,8 @@
   #if ENABLED(CR10_STOCKDISPLAY)
 
     #define BEEPER_PIN                      PE8
-    #define BTN_ENC                         PE9
 
+    #define BTN_ENC                         PE9
     #define BTN_EN1                         PE7
     #define BTN_EN2                         PB2
 
@@ -273,26 +273,27 @@
       #define TFTGLCD_CS                    PE7
 
     #endif
+
   #elif ENABLED(LCD_FOR_MELZI)
-  
+
     #error "CAUTION! LCD_FOR_MELZI requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. Comment out this line to continue."
-    
-    /**
-    * LCD_FOR_MELZI display pinout
-    * Needs custom cable:
-    *               BTT E3 RRF                         LCD_FOR_MELZI Display Ribbon
-    *                 _____                                         _____
-    *             5V | 1 2 | GND                   (LCD_RS) LCD_CS | 1 2 | ENC_B (BTN_EN1)
-    *  (LCD_EN) PE11 | 3 4 | PB1  (LCD_RS)       (LCD_EN) LCD_DATA | 3 4 | ENC_A (BTN_EN2)
-    *  (LCD_D4) PE10 | 5 6   PB2  (BTN_EN2)      (LCD_D4) LCD_SCLK | 5 6 | ENC_BTN (BTN_ENC)
-    *          RESET | 7 8 | PE7  (BTN_EN1)          (RESET) ESTOP | 7 8 | BEEPER
-    * (BTN_ENC) PE9  | 9 10| PE8  (BEEPER)                     5V  | 9 10| GND
-    *                 -----                                         -----
+
+   /** LCD_FOR_MELZI display pinout
+    *
+    *               BTT E3 RRF                                   Display Ribbon
+    *                ------                                         ------
+    * (BEEPER)  PE8 |10  9 | PE9  (BTN_ENC)                    GND |10  9 | 5V
+    * (BTN_EN1) PE7 | 8  7 | RESET                          BEEPER | 8  7 | ESTOP    (RESET)
+    * (BTN_EN2) PB2   6  5 | PE10 (LCD_D4)       (BTN_ENC) ENC_BTN | 6  5 | LCD_SCLK (LCD_D4)
+    * (LCD_RS)  PB1 | 4  3 | PE11 (LCD_EN)       (BTN_EN2) ENC_A   | 4  3 | LCD_DATA (LCD_EN)
+    *           GND | 2  1 | 5V                  (BTN_EN1) ENC_B   | 2  1 | LCD_CS   (LCD_RS)
+    *                ------                                         ------
     *                 EXP1                                          Ribbon
-    * 
-    * 
+    *
+    * Needs custom cable:
+    *
     *    Board   Adapter   Display Ribbon (coming from display)
-    *           _________
+    *
     *   EXP1-1 ----------- EXP1-9
     *   EXP1-2 ----------- EXP1-10
     *   EXP1-3 ----------- EXP1-3
@@ -305,11 +306,9 @@
     *  EXP1-10 ----------- EXP1-8
     */
 
-
-    //#define KILL_PIN                      
     #define BEEPER_PIN                      PE8
+
     #define BTN_ENC                         PE9
-    
     #define BTN_EN1                         PE7
     #define BTN_EN2                         PB2
 
@@ -317,16 +316,16 @@
     #define LCD_PINS_ENABLE                 PE11
     #define LCD_PINS_D4                     PE10
 
-    //  LCD_FOR_MELZI default timing is too fast, this works but maybe could be reduced:
-    #define BOARD_ST7920_DELAY_1 200
-    #define BOARD_ST7920_DELAY_2 400
-    #define BOARD_ST7920_DELAY_3 1200
   #else
     #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, LCD_FOR_MELZI, and TFTGLCD_PANEL_(SPI|I2C) are currently supported on the BTT_E3_RRF."
   #endif
 
   // Alter timing for graphical display
-  #if IS_U8GLIB_ST7920
+  #if ENABLED(LCD_FOR_MELZI)                      // LCD_FOR_MELZI default timing is too fast. This works but may be reduced.
+    #define BOARD_ST7920_DELAY_1             200
+    #define BOARD_ST7920_DELAY_2             400
+    #define BOARD_ST7920_DELAY_3            1200
+  #elif IS_U8GLIB_ST7920
     #define BOARD_ST7920_DELAY_1              96
     #define BOARD_ST7920_DELAY_2              48
     #define BOARD_ST7920_DELAY_3             600
@@ -353,7 +352,7 @@
    * Needs custom cable:
    *
    *    Board   Adapter   Display
-   *           _________
+   *
    *   EXP1-1 ----------- EXP1-10
    *   EXP1-2 ----------- EXP1-9
    *   SPI1-4 ----------- EXP1-6