diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index c9a900062cb8..418c25aef758 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -2710,6 +2710,7 @@ //#define TFT_RES_320x240 //#define TFT_RES_480x272 //#define TFT_RES_480x320 + //#define TFT_RES_1024x600 #endif /** diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index bfbe5ba6cf1a..13af3c25f5ff 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -1219,30 +1219,19 @@ */ #if ENABLED(MKS_TS35_V2_0) // ST7796 #define TFT_DEFAULT_DRIVER ST7796 - #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY) + #define TFT_DEFAULT_ORIENTATION TFT_EXCHANGE_XY #define TFT_RES_480x320 #define TFT_INTERFACE_SPI -#elif ENABLED(ANET_ET5_TFT35) // ST7796 - #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY) +#elif EITHER(LERDGE_TFT35, ANET_ET5_TFT35) // ST7796 + #define TFT_DEFAULT_ORIENTATION TFT_EXCHANGE_XY #define TFT_RES_480x320 #define TFT_INTERFACE_FSMC -#elif ENABLED(ANET_ET4_TFT28) // ST7789 +#elif ANY(ANET_ET4_TFT28, MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32) // ST7789 #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) #define TFT_RES_320x240 #define TFT_INTERFACE_FSMC -#elif ENABLED(MKS_ROBIN_TFT24) // ST7789 - #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) - #define TFT_RES_320x240 - #define TFT_INTERFACE_FSMC -#elif ENABLED(MKS_ROBIN_TFT28) // ST7789 - #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) - #define TFT_RES_320x240 - #define TFT_INTERFACE_FSMC -#elif ENABLED(MKS_ROBIN_TFT32) // ST7789 - #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) - #define TFT_RES_320x240 - #define TFT_INTERFACE_FSMC -#elif ENABLED(MKS_ROBIN_TFT35) // ILI9488 +#elif ANY(MKS_ROBIN_TFT35, TFT_TRONXY_X5SA, ANYCUBIC_TFT35) // ILI9488 + #define TFT_DRIVER ILI9488 #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) #define TFT_RES_480x320 #define TFT_INTERFACE_FSMC @@ -1251,21 +1240,12 @@ #define TFT_DEFAULT_ORIENTATION 0 #define TFT_RES_480x272 #define TFT_INTERFACE_FSMC -#elif ENABLED(MKS_ROBIN_TFT_V1_1R) // ILI9328 or R61505 - #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) - #define TFT_RES_320x240 - #define TFT_INTERFACE_FSMC -#elif EITHER(TFT_TRONXY_X5SA, ANYCUBIC_TFT35) // ILI9488 - #define TFT_DRIVER ILI9488 - #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) - #define TFT_RES_480x320 - #define TFT_INTERFACE_FSMC -#elif ENABLED(LONGER_LK_TFT28) +#elif ANY(MKS_ROBIN_TFT_V1_1R, LONGER_LK_TFT28) // ILI9328 or R61505 #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) #define TFT_RES_320x240 #define TFT_INTERFACE_FSMC #elif ENABLED(BIQU_BX_TFT70) // RGB - #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY) + #define TFT_DEFAULT_ORIENTATION TFT_EXCHANGE_XY #define TFT_RES_1024x600 #define TFT_INTERFACE_LTDC #if ENABLED(TOUCH_SCREEN) diff --git a/Marlin/src/lcd/tft_io/st7796s.h b/Marlin/src/lcd/tft_io/st7796s.h index e1931ed55148..6d79dd882ac2 100644 --- a/Marlin/src/lcd/tft_io/st7796s.h +++ b/Marlin/src/lcd/tft_io/st7796s.h @@ -144,39 +144,11 @@ static const uint16_t st7796s_init[] = { ESC_REG(ST7796S_PGC), 0x00F0, 0x0004, 0x0008, 0x0009, 0x0008, 0x0015, 0x002F, 0x0042, 0x0046, 0x0028, 0x0015, 0x0016, 0x0029, 0x002D, ESC_REG(ST7796S_NGC), 0x00F0, 0x0004, 0x0009, 0x0009, 0x0008, 0x0015, 0x002E, 0x0046, 0x0046, 0x0028, 0x0015, 0x0015, 0x0029, 0x002D, - ESC_REG(ST7796S_NORON), - ESC_REG(ST7796S_WRCTRLD), 0x0024, - ESC_REG(ST7796S_CSCON), 0x003C, // disable command 2 part I - ESC_REG(ST7796S_CSCON), 0x0069, // disable command 2 part II - ESC_REG(ST7796S_DISPON), - ESC_END -}; - -static const uint16_t lerdge_st7796s_init[] = { - DATASIZE_8BIT, - ESC_REG(ST7796S_SWRESET), ESC_DELAY(100), - ESC_REG(ST7796S_SLPOUT), ESC_DELAY(20), - - ESC_REG(ST7796S_CSCON), 0x00C3, // enable command 2 part I - ESC_REG(ST7796S_CSCON), 0x0096, // enable command 2 part II - - ESC_REG(ST7796S_MADCTL), ST7796S_MADCTL_DATA, - ESC_REG(ST7796S_COLMOD), 0x0055, - - ESC_REG(ST7796S_DIC), 0x0001, // 1-dot inversion - ESC_REG(ST7796S_EM), 0x00C6, - - ESC_REG(ST7796S_PWR2), 0x0015, - ESC_REG(ST7796S_PWR3), 0x00AF, - ESC_REG(ST7796S_VCMPCTL), 0x0022, - ESC_REG(ST7796S_VCMOST), 0x0000, - ESC_REG(ST7796S_DOCA), 0x0040, 0x008A, 0x0000, 0x0000, 0x0029, 0x0019, 0x00A5, 0x0033, - - /* Gamma Correction. */ - ESC_REG(ST7796S_PGC), 0x00F0, 0x0004, 0x0008, 0x0009, 0x0008, 0x0015, 0x002F, 0x0042, 0x0046, 0x0028, 0x0015, 0x0016, 0x0029, 0x002D, - ESC_REG(ST7796S_NGC), 0x00F0, 0x0004, 0x0009, 0x0009, 0x0008, 0x0015, 0x002E, 0x0046, 0x0046, 0x0028, 0x0015, 0x0015, 0x0029, 0x002D, - - ESC_REG(ST7796S_INVON), // Display inversion ON + #if ENABLED(ST7796S_INVERTED) + ESC_REG(ST7796S_INVON), // Display inversion ON + #else + ESC_REG(ST7796S_NORON), + #endif ESC_REG(ST7796S_WRCTRLD), 0x0024, ESC_REG(ST7796S_CSCON), 0x003C, // disable command 2 part I ESC_REG(ST7796S_CSCON), 0x0069, // disable command 2 part II diff --git a/Marlin/src/lcd/tft_io/tft_ids.h b/Marlin/src/lcd/tft_io/tft_ids.h index c4f6127c685a..2de111366c45 100644 --- a/Marlin/src/lcd/tft_io/tft_ids.h +++ b/Marlin/src/lcd/tft_io/tft_ids.h @@ -31,5 +31,4 @@ #define ILI9341 0x9341 #define ILI9488 0x9488 #define ILI9488_ID1 0x8066 // Some ILI9488 have 0x8066 in the 0x04 -#define LERDGE_ST7796 0xFFFE #define AUTO 0xFFFF diff --git a/Marlin/src/lcd/tft_io/tft_io.cpp b/Marlin/src/lcd/tft_io/tft_io.cpp index ded711b57768..707232b4bb48 100644 --- a/Marlin/src/lcd/tft_io/tft_io.cpp +++ b/Marlin/src/lcd/tft_io/tft_io.cpp @@ -97,10 +97,6 @@ if (lcd_id != 0xFFFFFFFF) return; write_esc_sequence(ili9341_init); #elif TFT_DRIVER == ILI9488 write_esc_sequence(ili9488_init); - #elif TFT_DRIVER == LERDGE_ST7796 - lcd_id = ST7796; - write_esc_sequence(lerdge_st7796s_init); - #elif TFT_DRIVER == AUTO // autodetect lcd_id = io.GetID() & 0xFFFF; diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index 1b3cf15e5afe..04f9afaad212 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -427,10 +427,10 @@ #define TFT_DRIVER ST7796 #endif #ifndef XPT2046_X_CALIBRATION - #define XPT2046_X_CALIBRATION 63934 + #define XPT2046_X_CALIBRATION 63934 #endif #ifndef XPT2046_Y_CALIBRATION - #define XPT2046_Y_CALIBRATION 63598 + #define XPT2046_Y_CALIBRATION 63598 #endif #ifndef XPT2046_X_OFFSET #define XPT2046_X_OFFSET -1 diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h index 4adc2f65a2f2..3cfa3cd3e5c2 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h @@ -72,42 +72,43 @@ #define X_DIR_PIN PB10 #define X_ENABLE_PIN PG0 //#ifndef X_CS_PIN -// #define X_CS_PIN PE0 +// #define X_CS_PIN PB2 //#endif #define Y_STEP_PIN PF14 #define Y_DIR_PIN PF15 #define Y_ENABLE_PIN PF13 //#ifndef Y_CS_PIN -// #define Y_CS_PIN PE1 +// #define Y_CS_PIN PE2 //#endif #define Z_STEP_PIN PF11 #define Z_DIR_PIN PF12 #define Z_ENABLE_PIN PC5 //#ifndef Z_CS_PIN -// #define Z_CS_PIN PE2 +// #define Z_CS_PIN PE3 //#endif #define E0_STEP_PIN PC14 #define E0_DIR_PIN PC13 #define E0_ENABLE_PIN PC15 //#ifndef E0_CS_PIN -// #define E0_CS_PIN PE3 +// #define E0_CS_PIN PE4 //#endif #define E1_STEP_PIN PF1 #define E1_DIR_PIN PF0 #define E1_ENABLE_PIN PF2 //#ifndef E1_CS_PIN -// #define E1_CS_PIN PE4 +// #define E1_CS_PIN PE1 //#endif -//#define E2_STEP_PIN PF4 // best guess -//#define E2_DIR_PIN PF3 // best guess -//#define E2_ENABLE_PIN PF5 // best guess -//#ifndef E2_CS_PIN -// #define E2_CS_PIN PB2 // best guess +//#define Z2_STEP_PIN PF4 +//#define Z2_DIR_PIN PF3 +//#define Z2_ENABLE_PIN PF5 +//#define Z2_STOP_PIN PG2 +//#ifndef Z2_CS_PIN +// #define Z2_CS_PIN PE0 //#endif #if HAS_TMC_UART @@ -144,12 +145,17 @@ #ifndef E1_SERIAL_RX_PIN #define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN #endif + // Ex-motor can be any... X2/Y2/Z2 or E2 #ifndef EX_SERIAL_TX_PIN - #define E2_SERIAL_TX_PIN PE0 + #define EX_SERIAL_TX_PIN PE0 #endif #ifndef EX_SERIAL_RX_PIN - #define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN + #define EX_SERIAL_RX_PIN EX_SERIAL_TX_PIN #endif + //#define Z2_SERIAL_RX_PIN EX_SERIAL_RX_PIN + //#define Z2_SERIAL_TX_PIN EX_SERIAL_TX_PIN + //#define E2_SERIAL_RX_PIN EX_SERIAL_RX_PIN + //#define E2_SERIAL_TX_PIN EX_SERIAL_TX_PIN // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 #endif @@ -193,8 +199,8 @@ // // LED / Lighting // -//#define CASE_LIGHT_PIN_CI -1 -//#define CASE_LIGHT_PIN_DO -1 +#define LED_PIN PA15 // Status LED +//#define CASE_LIGHT_PIN PB6 // LED Ribbon Connector (PWM TIM4_CH1) //#define NEOPIXEL_PIN -1 #ifndef RGB_LED_R_PIN #define RGB_LED_R_PIN PB8 // swap R and G pin for compatibility with real wires @@ -211,44 +217,54 @@ // #define SDIO_SUPPORT #define SDIO_CLOCK 4800000 +#define SD_DETECT_PIN PA8 +#if DISABLED(SDIO_SUPPORT) + #define SOFTWARE_SPI + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 + #define SD_SS_PIN PC11 + #define SDSS PC11 +#endif // // Misc. Functions // -#define SDSS PC11 -#define LED_PIN PA15 // Alive #define PS_ON_PIN PA4 #define KILL_PIN -1 #define POWER_LOSS_PIN PA4 // Power-loss / nAC_FAULT -#define SD_SCK_PIN PC12 -#define SD_MISO_PIN PC8 -#define SD_MOSI_PIN PD2 -#define SD_SS_PIN PC11 - -#define SD_DETECT_PIN PA8 -#define BEEPER_PIN PC7 - // // TFT with FSMC interface // #if HAS_FSMC_TFT - //#define TFT_DRIVER LERDGE_ST7796 + #ifndef TFT_DRIVER + #define TFT_DRIVER ST7796 + #endif + #define ST7796S_INVERTED #define TFT_RESET_PIN PD6 #define TFT_BACKLIGHT_PIN PD3 - #define TFT_CS_PIN PD7 - #define TFT_RS_PIN PD11 + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PD11 + + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN #define TOUCH_CS_PIN PG15 #define TOUCH_SCK_PIN PB3 #define TOUCH_MOSI_PIN PB5 #define TOUCH_MISO_PIN PB4 + #define TOUCH_INT_PIN PG12 #endif #if IS_NEWPANEL - #define BTN_EN1 PG10 - #define BTN_EN2 PG11 + #define BEEPER_PIN PC7 + #define BTN_EN1 PG11 + #define BTN_EN2 PG10 #define BTN_ENC PG9 + #ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM 2 + #endif #endif diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h index 4707a16e1432..2d5a45eee0af 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h @@ -31,8 +31,6 @@ #define STEP_TIMER 4 #define TEMP_TIMER 2 -//#define I2C_EEPROM - // USB Flash Drive support #define HAS_OTG_USB_HOST_SUPPORT @@ -150,7 +148,6 @@ // // Misc. Functions // -#define SDSS PC11 // SD is working using SDIO, not sure if this definition is needed? #define LED_PIN PC6 // Mainboard soldered green LED #define PS_ON_PIN PB2 // Board has a power module connector #define KILL_PIN -1 // There is no reset button on the LCD @@ -161,23 +158,25 @@ // #define SDIO_SUPPORT #define SDIO_CLOCK 4800000 - -#define SD_SCK_PIN PC12 -#define SD_MISO_PIN PC8 -#define SD_MOSI_PIN PD2 -#define SD_SS_PIN PC11 - #define SD_DETECT_PIN PG15 +#if DISABLED(SDIO_SUPPORT) + #define SOFTWARE_SPI + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 + #define SD_SS_PIN PC11 + #define SDSS PC11 +#endif // // Persistent Storage // If no option is selected below the SD Card will be used -// (this section modelled after pins_LONGER3D_LK.h) -// Warning: Not tested yet! Pins traced with multimeter, mistakes are possible +// Prefer the I2C option (F-RAM) to store Marlin settings, SPI option is not working yet + //#define SPI_EEPROM +//#define I2C_EEPROM -#if ENABLED(SPI_EEPROM) - // Lerdge has an SPI EEPROM Winbond W25Q128 (128Mbits) https://www.pjrc.com/teensy/W25Q128FV.pdf +#if ENABLED(SPI_EEPROM) // SPI EEPROM Winbond W25Q128 (128Mbits) https://www.pjrc.com/teensy/W25Q128FV.pdf #define SPI_CHAN_EEPROM1 1 #define SPI_EEPROM1_CS_PIN PB12 // datasheet: /CS pin, found with multimeter, not tested #define EEPROM_SCK_PIN PB13 // datasheet: CLK pin, found with multimeter, not tested @@ -185,29 +184,45 @@ #define EEPROM_MOSI_PIN PB15 // datasheet: DI pin, found with multimeter, not tested #define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet) #define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE) // Limit to 64KB for now... +#elif ENABLED(I2C_EEPROM) // FM24CL64BG (CYP1813) 64Kbit F-RAM + #define SOFT_I2C_EEPROM // Force the use of Software I2C + #define I2C_SDA_PIN PG13 + #define I2C_SCL_PIN PG14 // To be confirmed on the Lerdge S, but probably same as the K + #define MARLIN_EEPROM_SIZE 0x10000 #else #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM #endif // -// LCD / Controller +// TFT with FSMC interface // +#if HAS_FSMC_TFT + #ifndef TFT_DRIVER + #define TFT_DRIVER ST7796 + #endif + #define ST7796S_INVERTED -// The LCD is initialized in FSMC mode -#define BEEPER_PIN PD13 + #define TFT_RESET_PIN PD6 + #define TFT_BACKLIGHT_PIN PD3 -#define BTN_EN1 PC14 -#define BTN_EN2 PC15 -#define BTN_ENC PC13 + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PD11 -#define TFT_RESET_PIN PD6 -#define TFT_BACKLIGHT_PIN PD3 + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN -#define TFT_CS_PIN PD7 // TFT works -#define TFT_RS_PIN PD11 // TFT works + #define TOUCH_CS_PIN PB6 + #define TOUCH_SCK_PIN PB3 + #define TOUCH_MOSI_PIN PB5 + #define TOUCH_MISO_PIN PB4 +#endif -// There is touch, but calibration is off -#define TOUCH_CS_PIN PB6 -#define TOUCH_SCK_PIN PB3 -#define TOUCH_MOSI_PIN PB5 -#define TOUCH_MISO_PIN PB4 +#if IS_NEWPANEL + #define BEEPER_PIN PD13 + #define BTN_EN1 PC15 + #define BTN_EN2 PC14 + #define BTN_ENC PC13 + #ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM 2 + #endif +#endif diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h index 3a9c286e001e..f65476c0b705 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h @@ -113,10 +113,24 @@ //#define CASE_LIGHT_PIN_DO -1 //#define NEOPIXEL_PIN -1 +// +// SD support (On board) +// +#define SDIO_SUPPORT +#define SD_DETECT_PIN PA8 +#define SDIO_CLOCK 4800000 +#if DISABLED(SDIO_SUPPORT) + #define SOFTWARE_SPI + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 + #define SD_SS_PIN PC11 + #define SDSS PC11 +#endif + // // Misc. Functions // -#define SDSS PC11 #define LED_PIN PC7 // Alive #define PS_ON_PIN -1 #define KILL_PIN -1 @@ -124,36 +138,36 @@ // Lerdge supports auto-power off and power loss sense through a single pin. #define POWER_LOSS_PIN PC14 // Power-loss / nAC_FAULT -#define SD_SCK_PIN PC12 -#define SD_MISO_PIN PC8 -#define SD_MOSI_PIN PD2 -#define SD_SS_PIN PC11 - // -// SD support -// -#define SDIO_SUPPORT -#define SD_DETECT_PIN PA8 -#define SDIO_CLOCK 4800000 - -// -// LCD / Controller +// TFT with FSMC interface // +#if HAS_FSMC_TFT + #ifndef TFT_DRIVER + #define TFT_DRIVER ST7796 + #endif + #define ST7796S_INVERTED -// The LCD is initialized in FSMC mode -#define BEEPER_PIN PD12 + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PD11 -#define BTN_EN1 PE3 -#define BTN_EN2 PE4 -#define BTN_ENC PE2 + #define TFT_RESET_PIN PD6 + #define TFT_BACKLIGHT_PIN PD3 -#define TFT_RESET_PIN PD6 -#define TFT_BACKLIGHT_PIN PD3 + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN -#define TFT_CS_PIN PD7 -#define TFT_RS_PIN PD11 + #define TOUCH_CS_PIN PB6 + #define TOUCH_SCK_PIN PB3 + #define TOUCH_MOSI_PIN PB5 + #define TOUCH_MISO_PIN PB4 +#endif -#define TOUCH_CS_PIN PB6 -#define TOUCH_SCK_PIN PB3 -#define TOUCH_MOSI_PIN PB5 -#define TOUCH_MISO_PIN PB4 +#if IS_NEWPANEL + #define BEEPER_PIN PD12 + #define BTN_EN1 PE4 + #define BTN_EN2 PE3 + #define BTN_ENC PE2 + #ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM 2 + #endif +#endif diff --git a/buildroot/share/PlatformIO/scripts/lerdge.py b/buildroot/share/PlatformIO/scripts/lerdge.py index 5c35c19e7df2..654f0ad4df92 100644 --- a/buildroot/share/PlatformIO/scripts/lerdge.py +++ b/buildroot/share/PlatformIO/scripts/lerdge.py @@ -41,7 +41,8 @@ def encrypt(source, target, env): renamed.close() if 'encrypt' in board.get("build").keys(): - marlin.add_post_action(encrypt); + if board.get("build.encrypt") != "": + marlin.add_post_action(encrypt) else: print("LERDGE builds require output file via board_build.encrypt = 'filename' parameter") - exit(1); + exit(1) diff --git a/buildroot/share/PlatformIO/scripts/offset_and_rename.py b/buildroot/share/PlatformIO/scripts/offset_and_rename.py index b42b2f35317c..9caed298e434 100644 --- a/buildroot/share/PlatformIO/scripts/offset_and_rename.py +++ b/buildroot/share/PlatformIO/scripts/offset_and_rename.py @@ -45,7 +45,8 @@ def encrypt(source, target, env): marlin.encrypt_mks(source, target, env, board.get("build.encrypt")) - marlin.add_post_action(encrypt); + if board.get("build.encrypt") != "": + marlin.add_post_action(encrypt) # # For build.rename simply rename the firmware file. diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_BTT002/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_BTT002/hal_conf_extra.h index 40b340c20560..ef621d57bf29 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_BTT002/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_BTT002/hal_conf_extra.h @@ -4,6 +4,7 @@ #define HAL_ADC_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED @@ -32,7 +33,6 @@ //#define HAL_SRAM_MODULE_ENABLED //#define HAL_SDRAM_MODULE_ENABLED //#define HAL_HASH_MODULE_ENABLED -//#define HAL_EXTI_MODULE_ENABLED //#define HAL_SMBUS_MODULE_ENABLED //#define HAL_I2S_MODULE_ENABLED //#define HAL_IWDG_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_E3_RRF/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_E3_RRF/hal_conf_extra.h index 2c1557cbbbc5..b4eb0f9b5f79 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_E3_RRF/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_E3_RRF/hal_conf_extra.h @@ -4,6 +4,7 @@ #define HAL_ADC_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED @@ -32,7 +33,6 @@ #undef HAL_SRAM_MODULE_ENABLED #undef HAL_SDRAM_MODULE_ENABLED #undef HAL_HASH_MODULE_ENABLED -#undef HAL_EXTI_MODULE_ENABLED #undef HAL_SMBUS_MODULE_ENABLED #undef HAL_I2S_MODULE_ENABLED #undef HAL_IWDG_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_GTR_V1/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_GTR_V1/hal_conf_extra.h index 40b340c20560..ef621d57bf29 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_GTR_V1/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_GTR_V1/hal_conf_extra.h @@ -4,6 +4,7 @@ #define HAL_ADC_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED @@ -32,7 +33,6 @@ //#define HAL_SRAM_MODULE_ENABLED //#define HAL_SDRAM_MODULE_ENABLED //#define HAL_HASH_MODULE_ENABLED -//#define HAL_EXTI_MODULE_ENABLED //#define HAL_SMBUS_MODULE_ENABLED //#define HAL_I2S_MODULE_ENABLED //#define HAL_IWDG_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/PeripheralPins.c index a4f8f696ee82..9df61baf9b1d 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/PeripheralPins.c +++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/PeripheralPins.c @@ -392,9 +392,7 @@ const PinMap PinMap_USB_OTG_FS[] = { {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP {NC, NP, 0} }; -#endif -#ifdef HAL_PCD_MODULE_ENABLED const PinMap PinMap_USB_OTG_HS[] = { //{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID //{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/hal_conf_extra.h index 42c76a4bbffb..d62c510095c9 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/hal_conf_extra.h @@ -4,6 +4,7 @@ #define HAL_ADC_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED @@ -33,7 +34,6 @@ #undef HAL_SRAM_MODULE_ENABLED #undef HAL_SDRAM_MODULE_ENABLED #undef HAL_HASH_MODULE_ENABLED -#undef HAL_EXTI_MODULE_ENABLED #undef HAL_SMBUS_MODULE_ENABLED #undef HAL_I2S_MODULE_ENABLED #undef HAL_IWDG_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_SKR_PRO_11/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_SKR_PRO_11/hal_conf_extra.h index 40b340c20560..ef621d57bf29 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_SKR_PRO_11/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_SKR_PRO_11/hal_conf_extra.h @@ -4,6 +4,7 @@ #define HAL_ADC_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED @@ -32,7 +33,6 @@ //#define HAL_SRAM_MODULE_ENABLED //#define HAL_SDRAM_MODULE_ENABLED //#define HAL_HASH_MODULE_ENABLED -//#define HAL_EXTI_MODULE_ENABLED //#define HAL_SMBUS_MODULE_ENABLED //#define HAL_I2S_MODULE_ENABLED //#define HAL_IWDG_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BTT_SKR_SE_BX/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_BTT_SKR_SE_BX/hal_conf_extra.h index 4050fe810f9d..99f3a30443b6 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_BTT_SKR_SE_BX/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_BTT_SKR_SE_BX/hal_conf_extra.h @@ -51,7 +51,7 @@ extern "C" { #define HAL_DMA2D_MODULE_ENABLED #define HAL_DSI_MODULE_ENABLED #define HAL_ETH_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_FDCAN_MODULE_ENABLED #define HAL_FLASH_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h index fd20d8fe6f07..3a6b7037adf0 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h @@ -20,11 +20,6 @@ extern "C" { */ #include "stm32yyxx_hal_conf.h" -#undef HAL_PWR_MODULE_ENABLED -#define HAL_PWR_MODULE_ONLY // disable low power & PA0 wakeup pin (its T°c pin) - -#define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG - #ifdef HAL_PCD_MODULE_ENABLED #warning "No direct STM32 USB pins on Longer3D board" #undef HAL_PCD_MODULE_ENABLED // USB Device @@ -35,20 +30,20 @@ extern "C" { #undef HAL_HCD_MODULE_ENABLED // USB Host #endif -#ifndef HAL_USART_MODULE_ENABLED - //#define HAL_USART_MODULE_ENABLED // Useless.... UART_MODULE do it -#endif +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts +#define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG + +#undef HAL_PWR_MODULE_ENABLED +#define HAL_PWR_MODULE_ONLY // disable low power & PA0 wakeup pin (its T°c pin) #undef HAL_CAN_LEGACY_MODULE_ENABLED #undef HAL_CAN_MODULE_ENABLED #undef HAL_DAC_MODULE_ENABLED #undef HAL_RTC_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED // for ENDSTOP_INTERRUPTS_FEATURE - /** - * @brief List of modules in the framework (first ones enabled by default) - */ + * @brief List of modules in the framework (first ones enabled by default) + */ //#define HAL_MODULE_ENABLED //#define HAL_ADC_MODULE_ENABLED //#define HAL_CORTEX_MODULE_ENABLED @@ -66,13 +61,11 @@ extern "C" { //#define HAL_SRAM_MODULE_ENABLED //#define HAL_TIM_MODULE_ENABLED //#define HAL_UART_MODULE_ENABLED - //#define HAL_CAN_MODULE_ENABLED //#define HAL_CAN_LEGACY_MODULE_ENABLED //#define HAL_CEC_MODULE_ENABLED //#define HAL_CRC_MODULE_ENABLED //#define HAL_ETH_MODULE_ENABLED -//#define HAL_EXTI_MODULE_ENABLED //#define HAL_HCD_MODULE_ENABLED //#define HAL_I2S_MODULE_ENABLED //#define HAL_IRDA_MODULE_ENABLED @@ -81,7 +74,7 @@ extern "C" { //#define HAL_NOR_MODULE_ENABLED //#define HAL_PCCARD_MODULE_ENABLED //#define HAL_SMARTCARD_MODULE_ENABLED -//#define HAL_USART_MODULE_ENABLED +//#define HAL_USART_MODULE_ENABLED // Useless.... UART_MODULE does it //#define HAL_WWDG_MODULE_ENABLED //#define HAL_MMC_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/hal_conf_custom.h b/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/hal_conf_custom.h index 7d19d532a597..a41247b9b1f6 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/hal_conf_custom.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/hal_conf_custom.h @@ -41,7 +41,7 @@ extern "C" { #define HAL_ADC_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_FLASH_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/hal_conf_custom.h b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/hal_conf_custom.h index 1252bc705952..58e9646b57f5 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/hal_conf_custom.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/hal_conf_custom.h @@ -36,6 +36,7 @@ extern "C" { #define HAL_CRC_MODULE_ENABLED #define HAL_DAC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_FLASH_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED @@ -61,7 +62,6 @@ extern "C" { //#define HAL_SRAM_MODULE_ENABLED //#define HAL_SDRAM_MODULE_ENABLED //#define HAL_HASH_MODULE_ENABLED -//#define HAL_EXTI_MODULE_ENABLED //#define HAL_SMBUS_MODULE_ENABLED //#define HAL_I2S_MODULE_ENABLED //#define HAL_IWDG_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/hal_conf_extra.h index 0c44f0874224..952fe3c5b881 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/hal_conf_extra.h @@ -40,6 +40,7 @@ #define HAL_CRC_MODULE_ENABLED #define HAL_DAC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED #define HAL_PWR_MODULE_ENABLED @@ -64,7 +65,6 @@ //#define HAL_SRAM_MODULE_ENABLED //#define HAL_SDRAM_MODULE_ENABLED //#define HAL_HASH_MODULE_ENABLED -//#define HAL_EXTI_MODULE_ENABLED //#define HAL_SMBUS_MODULE_ENABLED //#define HAL_I2S_MODULE_ENABLED //#define HAL_IWDG_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_FYSETC_CHEETAH_V20/hal_conf_custom.h b/buildroot/share/PlatformIO/variants/MARLIN_FYSETC_CHEETAH_V20/hal_conf_custom.h index 395bfcd4b764..2ff2fd686ea4 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_FYSETC_CHEETAH_V20/hal_conf_custom.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_FYSETC_CHEETAH_V20/hal_conf_custom.h @@ -35,6 +35,7 @@ extern "C" { #define HAL_ADC_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_FLASH_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED @@ -61,7 +62,6 @@ extern "C" { //#define HAL_SRAM_MODULE_ENABLED //#define HAL_SDRAM_MODULE_ENABLED //#define HAL_HASH_MODULE_ENABLED -//#define HAL_EXTI_MODULE_ENABLED //#define HAL_SMBUS_MODULE_ENABLED //#define HAL_I2S_MODULE_ENABLED //#define HAL_LTDC_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/PeripheralPins.c index 044f555a4105..7f6b32c22800 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/PeripheralPins.c +++ b/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/PeripheralPins.c @@ -398,3 +398,21 @@ const PinMap PinMap_USB_OTG_HS[] = { {NC, NP, 0} }; #endif + +//*** SD *** + +#ifdef HAL_SD_MODULE_ENABLED +WEAK const PinMap PinMap_SD[] = { +//{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4 +//{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5 +//{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6 +//{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7 + {PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0 + {PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1 + {PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2 + {PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3 + {PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK + {PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD + {NC, NP, 0} +}; +#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/variant.h index 87033a68e5f6..f4488356b7d0 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/variant.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_LERDGE/variant.h @@ -163,32 +163,37 @@ extern "C" { // Below SPI and I2C definitions already done in the core // Could be redefined here if differs from the default one // SPI Definitions -#define PIN_SPI_SS PF11 -#define PIN_SPI_MOSI PB15 -#define PIN_SPI_MISO PB14 -#define PIN_SPI_SCK PB13 +// SPI1 (Winbond on the Lerdge-K) +//#define PIN_SPI_SS PC4 +//#define PIN_SPI_SCK PA5 +//#define PIN_SPI_MISO PA6 +//#define PIN_SPI_MOSI PA7 +// SPI2 (Winbond on the Lerdge-S) +//#define PIN_SPI_SS PB12 +//#define PIN_SPI_SCK PB13 +//#define PIN_SPI_MISO PB14 +//#define PIN_SPI_MOSI PB15 -//max6675 -//#define PIN_SPI_SS PA4 -//#define PIN_SPI_SCK PA5 -//#define PIN_SPI_MISO PA6 -//#define PIN_SPI_MOSI PA7 - - - - -// I2C Definitions -#define PIN_WIRE_SDA PB7 -#define PIN_WIRE_SCL PB6 +// I2C Definitions (Software I2C) +//#define PIN_WIRE_SDA PG13 +//#define PIN_WIRE_SCL PG14 // Timer Definitions -//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c -#define TIMER_TONE TIM6 - -// Do not use basic timer: OC is required -#define TIMER_SERVO TIM1 //TODO: advanced-control timers don't work +// Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c +// FANs may require PWM timers 3 10 11 13 +// The LED/RGB connectors timer 4 +// Beware: STEP_TIMER default is 6 and TEMP_TIMER 14 for the F407 +#ifndef TIMER_TONE + #define TIMER_TONE TIM8 // TIM3 or TIM8 for SPEAKER compat on the lerdge K (PC6) +#endif // TIM4 for that on the Lerdge S (PD11) +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM1 // Ideally TIM2 for Hardware PWM (PB11) +#endif // TIM4 on the S (PD12) +#ifndef TIMER_SERIAL + #define TIMER_SERIAL TIM7 // Default used in SoftwareSerial lib +#endif // UART Definitions // Define here Serial instance number to map on Serial generic name @@ -208,6 +213,8 @@ extern "C" { /* Extra HAL modules */ //#define HAL_DAC_MODULE_ENABLED #define HAL_SD_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #ifdef __cplusplus } // extern "C" diff --git a/buildroot/share/PlatformIO/variants/MARLIN_STEVAL_F401VE/hal_conf_custom.h b/buildroot/share/PlatformIO/variants/MARLIN_STEVAL_F401VE/hal_conf_custom.h index aeaaf890f24b..7d013d2b27f4 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_STEVAL_F401VE/hal_conf_custom.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_STEVAL_F401VE/hal_conf_custom.h @@ -35,6 +35,7 @@ extern "C" { #define HAL_ADC_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts #define HAL_FLASH_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED @@ -62,7 +63,6 @@ extern "C" { //#define HAL_SRAM_MODULE_ENABLED //#define HAL_SDRAM_MODULE_ENABLED //#define HAL_HASH_MODULE_ENABLED -//#define HAL_EXTI_MODULE_ENABLED //#define HAL_SMBUS_MODULE_ENABLED //#define HAL_I2S_MODULE_ENABLED //#define HAL_LTDC_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/MARLIN_TH3D_EZBOARD_LITE_V2/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_TH3D_EZBOARD_LITE_V2/hal_conf_extra.h index 8c46edb50e6e..2ad290502338 100755 --- a/buildroot/share/PlatformIO/variants/MARLIN_TH3D_EZBOARD_LITE_V2/hal_conf_extra.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_TH3D_EZBOARD_LITE_V2/hal_conf_extra.h @@ -36,6 +36,19 @@ */ #define HAL_MODULE_ENABLED #define HAL_ADC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +//#define HAL_UART_MODULE_ENABLED // by default + //#define HAL_CAN_MODULE_ENABLED //#define HAL_CAN_LEGACY_MODULE_ENABLED //#define HAL_CRC_MODULE_ENABLED @@ -43,40 +56,28 @@ //#define HAL_CRYP_MODULE_ENABLED //#define HAL_DAC_MODULE_ENABLED //#define HAL_DCMI_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED //#define HAL_DMA2D_MODULE_ENABLED //#define HAL_ETH_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED //#define HAL_NAND_MODULE_ENABLED //#define HAL_NOR_MODULE_ENABLED //#define HAL_PCCARD_MODULE_ENABLED //#define HAL_SRAM_MODULE_ENABLED //#define HAL_SDRAM_MODULE_ENABLED //#define HAL_HASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -//#define HAL_EXTI_MODULE_ENABLED //#define HAL_I2C_MODULE_ENABLED //#define HAL_SMBUS_MODULE_ENABLED //#define HAL_I2S_MODULE_ENABLED //#define HAL_IWDG_MODULE_ENABLED //#define HAL_LTDC_MODULE_ENABLED //#define HAL_DSI_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED //#define HAL_QSPI_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED //#define HAL_RNG_MODULE_ENABLED //#define HAL_RTC_MODULE_ENABLED //#define HAL_SAI_MODULE_ENABLED //#define HAL_SD_MODULE_ENABLED -#define HAL_SPI_MODULE_ENABLED -#define HAL_TIM_MODULE_ENABLED -//#define HAL_UART_MODULE_ENABLED // by default -#define HAL_USART_MODULE_ENABLED //#define HAL_IRDA_MODULE_ENABLED //#define HAL_SMARTCARD_MODULE_ENABLED //#define HAL_WWDG_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED //#define HAL_HCD_MODULE_ENABLED //#define HAL_FMPI2C_MODULE_ENABLED //#define HAL_SPDIFRX_MODULE_ENABLED diff --git a/ini/stm32f4.ini b/ini/stm32f4.ini index 29dd93307826..6870345121d8 100644 --- a/ini/stm32f4.ini +++ b/ini/stm32f4.ini @@ -255,14 +255,13 @@ board_build.encrypt = firmware.bin board_build.offset = 0x10000 build_flags = ${stm32_variant.build_flags} -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4 - -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE - -DHAL_SRAM_MODULE_ENABLED + -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DLERDGE_TFT35 build_unflags = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 extra_scripts = ${stm32_variant.extra_scripts} buildroot/share/PlatformIO/scripts/lerdge.py # -# Lerdge X +# Lerdge X (STM32F407VE) # [env:LERDGEX] platform = ${lerdge_common.platform} @@ -279,7 +278,7 @@ platform_packages = ${stm_flash_drive.platform_packages} build_flags = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags} # -# Lerdge S +# Lerdge S (STM32F407ZG) # [env:LERDGES] platform = ${lerdge_common.platform} @@ -296,7 +295,7 @@ platform_packages = ${stm_flash_drive.platform_packages} build_flags = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags} # -# Lerdge K +# Lerdge K (STM32F407ZG) # [env:LERDGEK] platform = ${lerdge_common.platform}