- esp32c2: Add esp32c2 eco4 rom magic value
- packaging: Correctly exclude the unwanted sub/modules
- espefuse: Supports wafer efuse versions for esp32c61
- esptool: add new command SFDP read
- esptool: Add option to retry connection in a loop
- efuse: Updates efuse table for esp32c5
- efuse: Updates efuse table for esp32p4
- esp32c61: Added stub flasher support
- cli: add autocompletions
- esptool: allow picking UART by VID/PID/Name
- esp32c5: Add USB-serial/JTAG stub support
- esp32c5: Add UART stub support
- esptool: Print key_purpose name for get_security_info cmd
- espefuse: Adds support extend efuse table by user CSV file
- espefuse: Adds efuse dump formats: separated(default) and united(new)
- espefuse: Adds incompatible eFuse settings check for S3
- reset: Apply reconnections to the whole reset sequence, not line transitions
- reset: Automatically reconnect if port disconnects during reset
- esp32-p4: Add ECO1 magic number
- espsecure: Add support for secure boot v2 using ECDSA-P384 signatures
- write_flash: retry flashing if chip disconnects
- espefuse: Allow filtering efuses based on command line arguments
- esploader: Enable context manager for esp instances
- espefuse: Added check for correctness of written data
- espefuse: Improves help for burn_efuse cmd
- esp32s3: clear boot control register on hard reset
- esp32-p4: add spi-connection restriction to ROM class
- add UF2 IDs for ESP32-C5 and ESP32-C61
- espefuse: Updates efuses for C5 and C61
- esp32c61: add c61 basic flash support (no_stub)
- esp32c5: skipped the stub check for esp32c5 mp
- esp32c5: base support of esp32c5 mp (no stub)
- Added warning when secure boot enabled
- cmds/write_flash: Recalculated SHA digest for image binary
- print flash voltage in flash_id command
- esptool: Adds wafer and pkg versions
- espefuse: Update adc_info commands for all chips
- espefuse: Adds new efuses for esp32p4
- espefuse: Allow the espefuse.py to work when coding scheme == 3
- err_defs: Add ROM bootloader flash error definitions
- Use ruff instead of flake8 and black both in pre-commit and CI
- esp32p4: Enable USB-serial/JTAG in flasher stub
- espefuse: Postpone some efuses to burn them at the very end
- add advisory port locking
- espefuse: check_error --recover chip even if there are num_errors
- espefuse: Adds new efuses for esp32c6 and esp32h2
- esp32c5: add target esp32c5 beta3
- esptool: Fix esp32c61 flash frequency config
- esptool: Fix incorrect chip version for esp32c5
- write_flash: Verify if files will fit against the real flash size when possible
- remote_ports: Disable reset sequence when a socket is used
- bitstring: Restricted bitstring dependency to fix 32-bit compatibility
- esp32_d0wdr2_v3: Print correct chip name
- pass error message to exception in OTG mode
- bin_image: add check for ELF file segment when saving RAM segments
- docs: Add a note about entering manual bootloader mode
- esp32c5: Fix MAC reading for esptool
- Erase non-aligned bytes with --no-stub
- esp32-c5: Use a longer reset delay with usb-serial/jtag to stabilize boot-up
- espefuse: Use stub class if stub flasher is running
- Do not append SHA256 when
--ram-only-header - elf2image: add ELF flags to merge condition
- ram_only_header: pad flash segment to next boundary
- sort segments if ram_only_header is used
- espefuse: Fix efuse base addr for esp32c5 MP
- fix type annotation to comply with mypy
- espefuse: Fix burn_key for ECDSA_KEY, it can read pem file
- secure_download_mode: Disable secure boot detection and print more info
- esptool: clear boot control register on ESP32-S3
- intelhex: catch unicode decode errors when converting hex to binary
- ROM doesn't attach in-package flash chips
- close file gracefully in espsecure
- Fixed glitches on RTS line when no_reset option on Windows
- merge_bin: treat files starting with colon as raw files
- Index image segments from 0 instead of 1
- read_flash: add flash size arg to enable reading past 2MB without stub
- read_flash: flush transmit buffer less often to inrease throughput
- esptool: Proper alignment for SoCs with offset load
- ignore resetting on unsupported ports
- esptool: Remove the shebang from uf2_writer.py
- Migrated esp_rfc2217_server into standalone subpackage
- test/esptool: Updated tests according to SHA recomputation for binary
- style: Comply with black>=24.0.0
- test_esptool: Added test for embedded and detected flash size match
- spi_connection: Support --spi-connection on all chips
- espefuse: Support XTS_AES_256_KEY key_purpose for ESP32P4
- xip_psram: support xip psram feature on esp32p4
- add support for intel hex format
- esp32p4: Stub flasher support
- elf2image: add ram-only-header argument
- rfc2217_server: Add hard reset sequence
- espefuse: Adds efuse ADC calibration data for ESP32H2
- espefuse: Update the way to complete the operation
- add support for get_security_info on esp32c3 ECO7
- loader: Added hints for some serial port issues when rising port error
- Add support for Python 3.12
- esp32c3: Support ECO6 and ECO7 magic numbers
- merge_bin: add support for uf2 format
- esp32-s3: Support >16MB quad flash chips
- efuse: Update key purpose table and tests
- efuse: ESP32P4 adds ecdsa_key support
- espefuse: Add support for esp32p4 chip
- esptool: added target to esp32p4
- espsecure: Allow prompting for HSM PIN in read_hsm_config
- esptool: Add new packages for ESP32C3 and flash efuses
- esptool: Add tests for get_chip_features
- esptool: Add PICO package for ESP32S3 and flash/psram efuses
- get_security_info: Improved the output format and added more details
- esp32c2: Added get_flash_cap and get_flash_vendor
- testloadram: Windows assertion error
- fixed exit() to be used from right module
- esp32c2: Recommend using higher baud rate if connection fails
- test_esptool: Fixed connection issue on Windows
- esptool: Rephrase the --ram-only-header command message
- load_ram: check for overlaps in bss section
- tests/intelhex: make sure file is closed on Windows
- spi_connection: Unattach previously attached SPI flash
- espefuse: Fix ECDSA_FORCE_USE_HARDWARE_K for ECDSA key (esp32h2)
- loader: Could not open serial port message adjusted
- flasher_stub: fix usb-serial-jtag enabled non-related intr source
- bin_image: Check only ELF sections when searching for .flash.appdesc
- danger-github: Fir Danger GitHub token permission
- Fix redirection of STDOUT
- autodetection: Remove the ESP32-S2 ROM class from get_security_info autodetection
- assert in esp32 exclusive workaround
- elf2image: fix text/rodata mapping overlap issue on uni-idrom bus chips
- dangerGH: Update token permissions - allow Danger to add comments to PR
- expand file args: Correctly print the expanded command
- esp32-c2: Enable flashing in secure download mode
- stub_flasher: Cleanup, make adding new targets easier
- CH9102F: Suggest to install new serial drivers if writing to RAM fails
- compressed upload: Accept short data blocks with only Adler-32 bytes
- ESP32-S3: Correct RTC WDT registers to fix resets during flashing
- esptool: add option to dump whole flash based on detected size
- inconsistent usage of dirs separator
- USB-JTAG-Serial PID detection error
- Set flash parameters even with --flash_size keep
- ESP32-C6: Fix get_pkg_version and get_{major,minor}_chip_version
- ESP32-S3: Temporarily disable increasing CPU freq
- Unknown chip (ID or magic number) error
- ESP32-S3: Lower CPU freq to improve flasher stub stability
- rfc2217_server: Use new reset sequences
- stub: Add ESP32-S3 octal flash support
- esp32h2: Enable USB-JTAG/Serial mode in the stub flasher
- bootloader reset: Allow custom reset strategy setting with a config file
- Allow configuration with a config file
- bootloader reset: Tighter transitions on Unix systems
- ci: Publish development releases with custom pipeline
- esp32c6 stub: Increase CPU frequency and write/read speeds over USB-JTAG/Serial
- esp32c6 stub: Enable USB-JTAG/Serial
- flash_id: Print the flash type if available for the chip
- cmds: Make clear that flash type is from eFuse and not detection
- load config file: Sort unknown config options
- esp32c6: Workaround for bad MSPI frequency in HS mode
- flasher_stub: Correct boundaries for SPIWrite4B and SPIRead4B
- secure download mode: Reconnect if ROM refuses to respond
- secure download mode: Fix SDM detection on S2/S3
- ci: Merge two "ci" directories and build_tools into one
- ci: The development release job should not run by default
- setup: Use latest reedsolo package which can be installed with Python3.10 and Cython
- write_flash: Fix
--erase-alloption - espefuse: Close serial port even when espefuse fails
- espefuse: Fix compatibility with Bitstring>=4
- Comply with black 23.1 style
- Optimize unnecessary chip interrogations
- connection attempt: Decouple reset sequence settings
- flasher_stub: Increase CPU frequency and write/read speeds over native USB (USB-OTG)
- flasher_stub: Increase CPU frequency and write/read speeds over USB-JTAG/Serial
- Readable error message for serial-related issues
- Detect Guru Meditation errors
- Add workaround for breaking changes of bitstring==4
- close unused ports while get_default_connected_device
- image_info: Print application information if possible
- Add Macronix flash memory density definitions
- write_flash: Prevent flashing incompatible images
- Recover from serial errors when flashing
- Add stub flasher error messages definitions
- image_info: Image type autodetection
- elf2image: Simplify bootloader image selection