There is a new git command called subrepo that is meant to be a solid alternative to the submodule and subtree commands. All 3 of these commands allow you to include external repositories (pinned to specific commits) in your main repository. This is an often needed feature for project development under a source control system like Git. Unfortunately, the submodule command is severely lacking, and the subtree command (an attempt to make things better) is also very flawed. Fortunately, the subrepo command is here to save the day.
This article will discuss how the previous commands work, and where they go wrong, while explaining how the new subrepo command fixes the issues.
It should be noted that there are 3 distinct roles (ways people use repos) involved in discussing this topic:
owner — The primary author and repo owner
collaborators — Other developers who contribute to the repo
users — People who simply use the repo software
While the main point is to show how subrepo addresses the shortcomings of submodule and subtree, I'll start by giving a quick intro to the subrepo command.
Let's say that you have a project repo called 'freebird' and you want to have it include 2 other external repos, 'lynyrd' and 'skynyrd'. You would do the following:
git clone [email protected]/you/freebird
cd freebird
git subrepo clone [email protected]/you/lynyrd ext/lynyrd
git subrepo clone [email protected]/you/skynyrd ext/skynyrd --branch=1975What these commands do (at a high level) should be obvious. They "clone" (add) the repos content into the subdirectories you told them to. The details of what is happening to your repo will be discussed later, but adding new subrepos is easy. If you need to update the subrepos later:
git subrepo pull ext/lynyrd
git subrepo pull ext/skynyrd --branch=1976The lynyrd repo is tracking the upstream master branch, and you've changed the skynyrd subrepo to the 1976 branch. Since these subrepos are owned by 'you', you might want to change them in the context of your freebird repo. When things are working, you can push the subrepo changes back:
git subrepo push ext/lynyrd
git subrepo push ext/skynyrdLooks simple right? It's supposed to be. The intent of subrepo is to do the right things, and to not cause problems.
Of course there's more to it under the hood, and that's what the rest of this article is about.
Submodules tend to receive a lot of bad press. Here's some of it:
http://somethingsinistral.net/blog/git-submodules-are-probably-not-the-answer/
http://codingkilledthecat.wordpress.com/2012/04/28/why-your-company-shouldnt-use-git-submodules/
A quick recap of some of the good and bad things about submodules:
Good:
Use an external repo in a dedicated subdir of your project.
Pin the external repo to a specific commit.
The
git-submodulecommand is a core part of the Git project.
Bad:
Users have to know a repo has submodules.
Users have to get the subrepos manually.
Pulling a repo with submodules won't pull in the new submodule changes.
A submodule will break if the referenced repo goes away.
A submodule will break if a forced push removes the referenced commit.
Can't use different submodules/commits per main project branch.
Can't "try out" a submodule on alternate branch.
Main repo can be pushed upstream pointing to unpushed submod commits.
Command capability differs across Git versions.
Often need to change remote url, to push submodule changes upstream.
Removing or renaming a submodule requires many steps.
Internally, submodules are a real mess. They give the strong impression of being bolted on, well after Git was designed. Some commands are aware of the existence of submodules (although usually half-heartedly), and many commands are oblivious. For instance the git-clone command has a --recursive option to clone all subrepos, but it's not a default, so you still need to be aware of the need. The git-checkout command does nothing with the submodules, even if they are intended to differ across branches.
Let's talk a bit about how submodules are implemented in Git. Information about them is stored in 3 different places (in the top level repo directory):
.gitmodules.git/config.git/modules— The submodule repo's meta data (refs/objects)
So some of the information lives in the repo history (.gitmodules), but other info (.git/) is only known to the local repo.
In addition, the submodule introduces a new low level concept, to the committreeblob graph. Normally a git tree object points to blob (file) objects and more tree (directory) objects. Submodules have tree objects point to commit objects. While this seems clever and somewhat reasonable, it also means that every other git command (which was built on the super clean Git data model) has to be aware of this new possibility (and deal with it appropriately).
The point is that, while submodules are a real need, and a lot of work has gone into making them work decently, they are essentially a kludge to the Git model, and it is quite understandable why they haven't worked out as well as people would expect.
NOTE: Submodules are getting better with each release of Git, but it's still an endless catch up game.
One day, someone decided to think different. Instead of pointing to external repos, why not just include them into the main repo (but also allow them to be pulled and pushed separately as needed)?
At first this may feel like a wasteful approach. Why keep other repos physically inside your main one? But if you think about it abstractly, what's the difference? You want your users and collaborators to have all this code because your project needs it. So why worry about how it happens? In the end, the choice is yours, but I've grown very comfortable with this concept and I'll try to justify it well. I should note that the first paragraph of the submodule doc suggests considering this alternative.
The big win here is that you can do this using the existing git model. Nothing new is added. You are just adding commits to a history. You can do it different on every branch. You can merge branches sensibly.
The git-subtree command seems to have been inspired by Git's subtree merge strategy, which it uses internally, and possibly got its name from. A subtree merge allows you to take a completely separate Git history and make it be a subdirectory of your repo.
Adding a subtree was the easy part. All that needed to be done after that was to figure out a way to pull upstream changes and push local ones back upstream. And that's what the git-subtree command does.
So what's the problem with git-subtree then?
Well unfortunately, it drops a few balls. The main problems come down to an overly complicated commandline UX, poor collaborator awareness, and a fragile and messy implementation.
Good:
Use an external repo in a dedicated subdir of your project.
Pin the external repo to a specific commit.
Users get everything with a normal clone command.
Users don't need to know that subtrees are involved.
Can use different submodules/commits per main project branch.
Users don't need the subtree command. Only owners and collaborators.
Bad:
The remote url and branch info is not saved (except in the history).
Owners and collaborators have to enter the remote for every command.
Collaborators aren't made aware that subtrees are involved.
Pulled history is not squashed by default.
Creates a messy historical view. (See below)
Bash code is complicated.
Only one test file. Currently is failing.
As you can see, subtree makes quite a few things better, but after trying it for a while, the experience was more annoying than submodules. For example, consider this usage:
$ git subtree add --squash --prefix=foo [email protected]:my/thing mybranch
# weeks go by…
$ git subtree pull --squash --prefix=foo [email protected]:my/thing mybranch
# time to push local subtree changes back upstream
$ git subtree push --prefix=foo [email protected]:my/thing mybranchThe first thing you notice is the overly verbose syntax. It's justified in the first command, but in the other 2 commands I really don't want to have to remember what the remote and branch are that I'm using.
Moreover, my collaborators have no idea that subtrees are involved, let alone where they came from.
Consider the equivalent subrepo commands:
$ git subrepo clone [email protected]:my/thing foo -b mybranch
$ git subrepo pull foo
$ git subrepo push fooCollaborators see a file called 'foo/.gitrepo', and know that the subdir is a subrepo. The file contains all the information needed by future commands applied to that subrepo.
Now is a good time to dive into the techinical aspects of the subrepo command, but first let me explain how it came about.
As you may have surmised by now, I am the author of git-subrepo. I'd used submodules on and off for years, and when I became aware of subtree I gave it a try, but I quickly realized its problems. I decided maybe it could be improved. I decided to write down my expected commandline usage and my ideals of what it would and would not do. Then I set off to implement it. It's been a long road, but what I ended up with was even better than what I wanted from the start.
Let's review the Goods and Bads:
Good:
Use an external repo in a dedicated subdir of your project.
Pin the external repo to a specific commit.
Users get everything with a normal clone command.
Users don't need to know that subrepos are involved.
Can use different submodules/commits per main project branch.
Meta info is kept in an obvious place.
Everyone knows when a subdir is a subrepo.
Commandline UX is minimal and intuitive.
Pulled history is always squashed out locally.
Pushed history is kept intact.
Creates a clean historical view. (See below)
Bash code is very simple and easy to follow.
Comprehensive test suite. Currently passing on travis:
<badge travis ingydotnet/git-subrepo>
Bad:
--Subrepo is very new.-- (no longer true)
--Not well tested in the wild.-- (no longer true)
This review may seem somewhat slanted, but I honestly am not aware of any "bad" points that I'm not disclosing. That said, I am sure time will reveal bugs and shortcomings. Those can usually be fixed. Hopefully the model is correct, because that's harder to fix down the road.
OK. So how does it all work?
There are 3 main commands: clonepullpush. Let's start with the clone command. This is the easiest part. You give it a remote url, possibly a new subdir to put it, and possibly a remote branch to use. I say possibly, because the command can guess the subdir name (just like the git-clone command does), and the branch can be the upstream default branch.
Given this we do the following steps internally:
Fetch the remote content (for a specific refspec)
Read the remote head tree into the index
Checkout the index into the new subdir
Create a new subrepo commit object for the subdir content
Add a state file called .gitrepo to the new subrepo/subdir
Amend the merge commit with this new file
This process adds something like this to the top of your history:
* 9b6ddc9 git subrepo clone [email protected]:you/foo.git foo/
* 37c61a5 Previous head commit of your repoThe entire history has been squashed down into one commit, and placed on top of your history. This is important as it keeps your history as clean as possible. You don't need to have the subrepo history in your main project, since it is immutably available elsewhere, and you have a pointer to that place.
The new foo/.gitrepo file looks like this:
[subrepo]
remote = [email protected]:you/foo.git
branch = master
commit = 14c96c6931b41257b2d42b2edc67ddc659325823
parent = 37c61a5a234f5dd6f5c2aec037509f50d3a79b8f
cmdver = 0.1.0It contains all the info needed now and later. Note that the repo url is the generally pushable form, rather than the publically readable (https://…) form. This is the best practice. Users of your repo don't need access to this url, because the content is already in your repo. Only you and your collaborators need this url to pull/push in the future.
The next command is the pull command. Normally you just give it the subrepo's subdir path (although you can change the branch with -b), and it will get the other info from the subdir/.gitrepo file.
The pull command does these steps:
Fetch the upstream content
Check if anything needs pulling
Create a branch of local subrepo commits since last pull
Rebase this branch onto the upstream commits
Commit the HEAD of the rebased content
Update/amend the .gitrepo file
I've talked a bit about clean history but let me show you a comparison between subrepo and subtree. Let's run this command sequence using both methods. Note the differences between both the command syntax required, and the branch history produced.
Subrepo first:
$ git subrepo clone [email protected]:user/abc
$ git subrepo clone [email protected]:user/def xyz
$ git subrepo pull abc
$ git subrepo pull xyzThe resulting history is:
* b1f60cc subrepo pull xyz
* 4fb0276 subrepo pull abc
* bcef2a0 subrepo clone [email protected]:user/def xyz
* bebf0db subrepo clone [email protected]:user/abc
* 64eeaa6 (origin/master, origin/HEAD) O HAI FRENDCompare that to subtree. This:
$ git subrepo add abc [email protected]:user/abc master
$ git subrepo add xyz [email protected]:user/def master
$ git subrepo pull abc [email protected]:user/abc master
$ git subrepo pull xyz [email protected]:user/def masterProduces this:
* 739e45a (HEAD, master) Merge commit '5f563469d886d53e19cb908b3a64e4229f88a2d1'
|\
| * 5f56346 Squashed 'xyz/' changes from 08c7421..365409f
* | 641f5e5 Merge commit '8d88e90ce5f653ed2e7608a71b8693a2174ea62a'
|\ \
| * | 8d88e90 Squashed 'abc/' changes from 08c7421..365409f
* | | 1703ed2 Merge commit '0e091b672c4bbbbf6bc4f6694c475d127ffa21eb' as 'xyz'
|\ \ \
| | |/
| |/|
| * | 0e091b6 Squashed 'xyz/' content from commit 08c7421
| /
* | 07b77e7 Merge commit 'cd2b30a0229d931979ed4436b995875ec563faea' as 'abc'
|\ \
| |/
| * cd2b30a Squashed 'abc/' content from commit 08c7421
* 64eeaa6 (origin/master, origin/HEAD) O HAI FRENDThis was from a minimal case. Subtree history (when viewed this way at least) gets unreasonably ugly fast. Subrepo history, by contrast, always looks as clean as shown.
The final command, push, bascially just does the pull/rebase dance above described, and pushes the resulting history back. It does not squash the commits made locally, because it assumed that when you changed the local subrepo, you made messages that were intended to eventually be published back upstream.
The commands described above can also be done "by hand". If something fails during a pull or push (generally in the rebasing) then the command will tell you what to do to finish up.
You might choose to do everything by hand, and do your own merging strategies. This is perfectly reasonable. The subrepo command offers a few other helper commands to help you get the job done:
fetch- Fetch the upstream and create asubrepo/remote/<subdir>ref.branch- Create a branch of local subdir commits since the last pull, calledsubrepo/<subdir>.commit- Commit a merged branch's HEAD back into your repo.status- Show lots of useful info about the current state of the subrepos.clean- Remove branches, ref and remotes created by subrepo commands.help- Read the complete documentation!
Hopefully by now, you see that submodules are a painful choice with a dubious future, and that subtree, while a solid idea has many usage issues.
Give subrepo a try. It's painless, easily revertable and just might be what the doctor ordered.