flat.txt

pragma experimental ABIEncoderV2;

// File: Address.sol

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: IERC20.sol

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: IGenericLender.sol

interface IGenericLender {
    function lenderName() external view returns (string memory);

    function nav() external view returns (uint256);

    function strategy() external view returns (address);

    function apr() external view returns (uint256);

    function weightedApr() external view returns (uint256);

    function withdraw(uint256 amount) external returns (uint256);

    function emergencyWithdraw(uint256 amount) external;

    function deposit() external;

    function withdrawAll() external returns (bool);

    function hasAssets() external view returns (bool);

    function aprAfterDeposit(uint256 amount) external view returns (uint256);

    function setDust(uint256 _dust) external;

    function sweep(address _token) external;
}

// File: ITradeFactory.sol

// Feel free to change the license, but this is what we use

interface ITradeFactory {
    function enable(address, address) external;
    function disable(address, address) external;
}
// File: IUniswapV3SwapCallback.sol

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}
// File: SafeMath.sol

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: CompoundV3.sol

library CometStructs {
  struct AssetInfo {
    uint8 offset;
    address asset;
    address priceFeed;
    uint64 scale;
    uint64 borrowCollateralFactor;
    uint64 liquidateCollateralFactor;
    uint64 liquidationFactor;
    uint128 supplyCap;
  }

  struct UserBasic {
    int104 principal;
    uint64 baseTrackingIndex;
    uint64 baseTrackingAccrued;
    uint16 assetsIn;
    uint8 _reserved;
  }

  struct TotalsBasic {
    uint64 baseSupplyIndex;
    uint64 baseBorrowIndex;
    uint64 trackingSupplyIndex;
    uint64 trackingBorrowIndex;
    uint104 totalSupplyBase;
    uint104 totalBorrowBase;
    uint40 lastAccrualTime;
    uint8 pauseFlags;
  }

  struct UserCollateral {
    uint128 balance;
    uint128 _reserved;
  }

  struct RewardOwed {
    address token;
    uint owed;
  }

  struct TotalsCollateral {
    uint128 totalSupplyAsset;
    uint128 _reserved;
  }

  struct RewardConfig {
    address token;
    uint64 rescaleFactor;
    bool shouldUpscale;
  }
}

interface Comet is IERC20 {
  function baseScale() external view returns (uint);
  function supply(address asset, uint amount) external;
  function withdraw(address asset, uint amount) external;

  function getSupplyRate(uint utilization) external view returns (uint);
  function getBorrowRate(uint utilization) external view returns (uint);

  function getAssetInfoByAddress(address asset) external view returns (CometStructs.AssetInfo memory);
  function getAssetInfo(uint8 i) external view returns (CometStructs.AssetInfo memory);

  function getPrice(address priceFeed) external view returns (uint128);

  function userBasic(address) external view returns (CometStructs.UserBasic memory);
  function totalsBasic() external view returns (CometStructs.TotalsBasic memory);
  function userCollateral(address, address) external view returns (CometStructs.UserCollateral memory);

  function baseTokenPriceFeed() external view returns (address);

  function numAssets() external view returns (uint8);

  function getUtilization() external view returns (uint);

  function baseTrackingSupplySpeed() external view returns (uint);
  function baseTrackingBorrowSpeed() external view returns (uint);

  function totalSupply() override external view returns (uint256);
  function totalBorrow() external view returns (uint256);

  function baseIndexScale() external pure returns (uint64);
  function baseTrackingAccrued(address account) external view returns (uint64);

  function totalsCollateral(address asset) external view returns (CometStructs.TotalsCollateral memory);

  function baseMinForRewards() external view returns (uint256);
  function baseToken() external view returns (address);

  function accrueAccount(address account) external;
}

interface CometRewards {
  function getRewardOwed(address comet, address account) external returns (CometStructs.RewardOwed memory);
  function claim(address comet, address src, bool shouldAccrue) external;
  
  function rewardsClaimed(address comet, address account) external view returns(uint256);
  function rewardConfig(address comet) external view returns (CometStructs.RewardConfig memory);
}
// File: ISwapRouter.sol

/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Uniswap V3
interface ISwapRouter is IUniswapV3SwapCallback {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(ExactInputSingleParams calldata params)
        external
        payable
        returns (uint256 amountOut);

    struct ExactInputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInput(ExactInputParams calldata params)
        external
        payable
        returns (uint256 amountOut);

    struct ExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutputSingle(ExactOutputSingleParams calldata params)
        external
        payable
        returns (uint256 amountIn);

    struct ExactOutputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutput(ExactOutputParams calldata params)
        external
        payable
        returns (uint256 amountIn);

    // Taken from https://soliditydeveloper.com/uniswap3
    // Manually added to the interface
    function refundETH() external payable;
}
// File: SafeERC20.sol

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: BaseStrategy.sol

struct StrategyParams {
    uint256 performanceFee;
    uint256 activation;
    uint256 debtRatio;
    uint256 minDebtPerHarvest;
    uint256 maxDebtPerHarvest;
    uint256 lastReport;
    uint256 totalDebt;
    uint256 totalGain;
    uint256 totalLoss;
}

interface VaultAPI is IERC20 {
    function name() external view returns (string calldata);

    function symbol() external view returns (string calldata);

    function decimals() external view returns (uint256);

    function apiVersion() external pure returns (string memory);

    function permit(
        address owner,
        address spender,
        uint256 amount,
        uint256 expiry,
        bytes calldata signature
    ) external returns (bool);

    // NOTE: Vyper produces multiple signatures for a given function with "default" args
    function deposit() external returns (uint256);

    function deposit(uint256 amount) external returns (uint256);

    function deposit(uint256 amount, address recipient) external returns (uint256);

    // NOTE: Vyper produces multiple signatures for a given function with "default" args
    function withdraw() external returns (uint256);

    function withdraw(uint256 maxShares) external returns (uint256);

    function withdraw(uint256 maxShares, address recipient) external returns (uint256);

    function token() external view returns (address);

    function strategies(address _strategy) external view returns (StrategyParams memory);

    function pricePerShare() external view returns (uint256);

    function totalAssets() external view returns (uint256);

    function depositLimit() external view returns (uint256);

    function maxAvailableShares() external view returns (uint256);

    /**
     * View how much the Vault would increase this Strategy's borrow limit,
     * based on its present performance (since its last report). Can be used to
     * determine expectedReturn in your Strategy.
     */
    function creditAvailable() external view returns (uint256);

    /**
     * View how much the Vault would like to pull back from the Strategy,
     * based on its present performance (since its last report). Can be used to
     * determine expectedReturn in your Strategy.
     */
    function debtOutstanding() external view returns (uint256);

    /**
     * View how much the Vault expect this Strategy to return at the current
     * block, based on its present performance (since its last report). Can be
     * used to determine expectedReturn in your Strategy.
     */
    function expectedReturn() external view returns (uint256);

    /**
     * This is the main contact point where the Strategy interacts with the
     * Vault. It is critical that this call is handled as intended by the
     * Strategy. Therefore, this function will be called by BaseStrategy to
     * make sure the integration is correct.
     */
    function report(
        uint256 _gain,
        uint256 _loss,
        uint256 _debtPayment
    ) external returns (uint256);

    /**
     * This function should only be used in the scenario where the Strategy is
     * being retired but no migration of the positions are possible, or in the
     * extreme scenario that the Strategy needs to be put into "Emergency Exit"
     * mode in order for it to exit as quickly as possible. The latter scenario
     * could be for any reason that is considered "critical" that the Strategy
     * exits its position as fast as possible, such as a sudden change in
     * market conditions leading to losses, or an imminent failure in an
     * external dependency.
     */
    function revokeStrategy() external;

    /**
     * View the governance address of the Vault to assert privileged functions
     * can only be called by governance. The Strategy serves the Vault, so it
     * is subject to governance defined by the Vault.
     */
    function governance() external view returns (address);

    /**
     * View the management address of the Vault to assert privileged functions
     * can only be called by management. The Strategy serves the Vault, so it
     * is subject to management defined by the Vault.
     */
    function management() external view returns (address);

    /**
     * View the guardian address of the Vault to assert privileged functions
     * can only be called by guardian. The Strategy serves the Vault, so it
     * is subject to guardian defined by the Vault.
     */
    function guardian() external view returns (address);
}

/**
 * This interface is here for the keeper bot to use.
 */
interface StrategyAPI {
    function name() external view returns (string memory);

    function vault() external view returns (address);

    function want() external view returns (address);

    function apiVersion() external pure returns (string memory);

    function keeper() external view returns (address);

    function isActive() external view returns (bool);

    function delegatedAssets() external view returns (uint256);

    function estimatedTotalAssets() external view returns (uint256);

    function tendTrigger(uint256 callCost) external view returns (bool);

    function tend() external;

    function harvestTrigger(uint256 callCost) external view returns (bool);

    function harvest() external;

    event Harvested(uint256 profit, uint256 loss, uint256 debtPayment, uint256 debtOutstanding);
}

interface HealthCheck {
    function check(
        uint256 profit,
        uint256 loss,
        uint256 debtPayment,
        uint256 debtOutstanding,
        uint256 totalDebt
    ) external view returns (bool);
}

/**
 * @title Yearn Base Strategy
 * @author yearn.finance
 * @notice
 *  BaseStrategy implements all of the required functionality to interoperate
 *  closely with the Vault contract. This contract should be inherited and the
 *  abstract methods implemented to adapt the Strategy to the particular needs
 *  it has to create a return.
 *
 *  Of special interest is the relationship between `harvest()` and
 *  `vault.report()'. `harvest()` may be called simply because enough time has
 *  elapsed since the last report, and not because any funds need to be moved
 *  or positions adjusted. This is critical so that the Vault may maintain an
 *  accurate picture of the Strategy's performance. See  `vault.report()`,
 *  `harvest()`, and `harvestTrigger()` for further details.
 */

abstract contract BaseStrategy {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;
    string public metadataURI;

    // health checks
    bool public doHealthCheck;
    address public healthCheck;

    /**
     * @notice
     *  Used to track which version of `StrategyAPI` this Strategy
     *  implements.
     * @dev The Strategy's version must match the Vault's `API_VERSION`.
     * @return A string which holds the current API version of this contract.
     */
    function apiVersion() public pure returns (string memory) {
        return "0.4.3";
    }

    /**
     * @notice This Strategy's name.
     * @dev
     *  You can use this field to manage the "version" of this Strategy, e.g.
     *  `StrategySomethingOrOtherV1`. However, "API Version" is managed by
     *  `apiVersion()` function above.
     * @return This Strategy's name.
     */
    function name() external view virtual returns (string memory);

    /**
     * @notice
     *  The amount (priced in want) of the total assets managed by this strategy should not count
     *  towards Yearn's TVL calculations.
     * @dev
     *  You can override this field to set it to a non-zero value if some of the assets of this
     *  Strategy is somehow delegated inside another part of of Yearn's ecosystem e.g. another Vault.
     *  Note that this value must be strictly less than or equal to the amount provided by
     *  `estimatedTotalAssets()` below, as the TVL calc will be total assets minus delegated assets.
     *  Also note that this value is used to determine the total assets under management by this
     *  strategy, for the purposes of computing the management fee in `Vault`
     * @return
     *  The amount of assets this strategy manages that should not be included in Yearn's Total Value
     *  Locked (TVL) calculation across it's ecosystem.
     */
    function delegatedAssets() external view virtual returns (uint256) {
        return 0;
    }

    VaultAPI public vault;
    address public strategist;
    address public rewards;
    address public keeper;

    IERC20 public want;

    // So indexers can keep track of this
    event Harvested(uint256 profit, uint256 loss, uint256 debtPayment, uint256 debtOutstanding);

    event UpdatedStrategist(address newStrategist);

    event UpdatedKeeper(address newKeeper);

    event UpdatedRewards(address rewards);

    event UpdatedMinReportDelay(uint256 delay);

    event UpdatedMaxReportDelay(uint256 delay);

    event UpdatedProfitFactor(uint256 profitFactor);

    event UpdatedDebtThreshold(uint256 debtThreshold);

    event EmergencyExitEnabled();

    event UpdatedMetadataURI(string metadataURI);

    event SetHealthCheck(address);
    event SetDoHealthCheck(bool);

    // The minimum number of seconds between harvest calls. See
    // `setMinReportDelay()` for more details.
    uint256 public minReportDelay;

    // The maximum number of seconds between harvest calls. See
    // `setMaxReportDelay()` for more details.
    uint256 public maxReportDelay;

    // The minimum multiple that `callCost` must be above the credit/profit to
    // be "justifiable". See `setProfitFactor()` for more details.
    uint256 public profitFactor;

    // Use this to adjust the threshold at which running a debt causes a
    // harvest trigger. See `setDebtThreshold()` for more details.
    uint256 public debtThreshold;

    // See note on `setEmergencyExit()`.
    bool public emergencyExit;

    // modifiers
    modifier onlyAuthorized() {
        require(msg.sender == strategist || msg.sender == governance(), "!authorized");
        _;
    }

    modifier onlyEmergencyAuthorized() {
        require(
            msg.sender == strategist || msg.sender == governance() || msg.sender == vault.guardian() || msg.sender == vault.management(),
            "!authorized"
        );
        _;
    }

    modifier onlyStrategist() {
        require(msg.sender == strategist, "!strategist");
        _;
    }

    modifier onlyGovernance() {
        require(msg.sender == governance(), "!authorized");
        _;
    }

    modifier onlyKeepers() {
        require(
            msg.sender == keeper ||
                msg.sender == strategist ||
                msg.sender == governance() ||
                msg.sender == vault.guardian() ||
                msg.sender == vault.management(),
            "!authorized"
        );
        _;
    }

    modifier onlyVaultManagers() {
        require(msg.sender == vault.management() || msg.sender == governance(), "!authorized");
        _;
    }

    constructor(address _vault) public {
        _initialize(_vault, msg.sender, msg.sender, msg.sender);
    }

    /**
     * @notice
     *  Initializes the Strategy, this is called only once, when the
     *  contract is deployed.
     * @dev `_vault` should implement `VaultAPI`.
     * @param _vault The address of the Vault responsible for this Strategy.
     * @param _strategist The address to assign as `strategist`.
     * The strategist is able to change the reward address
     * @param _rewards  The address to use for pulling rewards.
     * @param _keeper The adddress of the _keeper. _keeper
     * can harvest and tend a strategy.
     */
    function _initialize(
        address _vault,
        address _strategist,
        address _rewards,
        address _keeper
    ) internal {
        require(address(want) == address(0), "Strategy already initialized");

        vault = VaultAPI(_vault);
        want = IERC20(vault.token());
        want.safeApprove(_vault, uint256(-1)); // Give Vault unlimited access (might save gas)
        strategist = _strategist;
        rewards = _rewards;
        keeper = _keeper;

        // initialize variables
        minReportDelay = 0;
        maxReportDelay = 86400;
        profitFactor = 100;
        debtThreshold = 0;

        vault.approve(rewards, uint256(-1)); // Allow rewards to be pulled
    }

    function setHealthCheck(address _healthCheck) external onlyVaultManagers {
        emit SetHealthCheck(_healthCheck);
        healthCheck = _healthCheck;
    }

    function setDoHealthCheck(bool _doHealthCheck) external onlyVaultManagers {
        emit SetDoHealthCheck(_doHealthCheck);
        doHealthCheck = _doHealthCheck;
    }

    /**
     * @notice
     *  Used to change `strategist`.
     *
     *  This may only be called by governance or the existing strategist.
     * @param _strategist The new address to assign as `strategist`.
     */
    function setStrategist(address _strategist) external onlyAuthorized {
        require(_strategist != address(0));
        strategist = _strategist;
        emit UpdatedStrategist(_strategist);
    }

    /**
     * @notice
     *  Used to change `keeper`.
     *
     *  `keeper` is the only address that may call `tend()` or `harvest()`,
     *  other than `governance()` or `strategist`. However, unlike
     *  `governance()` or `strategist`, `keeper` may *only* call `tend()`
     *  and `harvest()`, and no other authorized functions, following the
     *  principle of least privilege.
     *
     *  This may only be called by governance or the strategist.
     * @param _keeper The new address to assign as `keeper`.
     */
    function setKeeper(address _keeper) external onlyAuthorized {
        require(_keeper != address(0));
        keeper = _keeper;
        emit UpdatedKeeper(_keeper);
    }

    /**
     * @notice
     *  Used to change `rewards`. EOA or smart contract which has the permission
     *  to pull rewards from the vault.
     *
     *  This may only be called by the strategist.
     * @param _rewards The address to use for pulling rewards.
     */
    function setRewards(address _rewards) external onlyStrategist {
        require(_rewards != address(0));
        vault.approve(rewards, 0);
        rewards = _rewards;
        vault.approve(rewards, uint256(-1));
        emit UpdatedRewards(_rewards);
    }

    /**
     * @notice
     *  Used to change `minReportDelay`. `minReportDelay` is the minimum number
     *  of blocks that should pass for `harvest()` to be called.
     *
     *  For external keepers (such as the Keep3r network), this is the minimum
     *  time between jobs to wait. (see `harvestTrigger()`
     *  for more details.)
     *
     *  This may only be called by governance or the strategist.
     * @param _delay The minimum number of seconds to wait between harvests.
     */
    function setMinReportDelay(uint256 _delay) external onlyAuthorized {
        minReportDelay = _delay;
        emit UpdatedMinReportDelay(_delay);
    }

    /**
     * @notice
     *  Used to change `maxReportDelay`. `maxReportDelay` is the maximum number
     *  of blocks that should pass for `harvest()` to be called.
     *
     *  For external keepers (such as the Keep3r network), this is the maximum
     *  time between jobs to wait. (see `harvestTrigger()`
     *  for more details.)
     *
     *  This may only be called by governance or the strategist.
     * @param _delay The maximum number of seconds to wait between harvests.
     */
    function setMaxReportDelay(uint256 _delay) external onlyAuthorized {
        maxReportDelay = _delay;
        emit UpdatedMaxReportDelay(_delay);
    }

    /**
     * @notice
     *  Used to change `profitFactor`. `profitFactor` is used to determine
     *  if it's worthwhile to harvest, given gas costs. (See `harvestTrigger()`
     *  for more details.)
     *
     *  This may only be called by governance or the strategist.
     * @param _profitFactor A ratio to multiply anticipated
     * `harvest()` gas cost against.
     */
    function setProfitFactor(uint256 _profitFactor) external onlyAuthorized {
        profitFactor = _profitFactor;
        emit UpdatedProfitFactor(_profitFactor);
    }

    /**
     * @notice
     *  Sets how far the Strategy can go into loss without a harvest and report
     *  being required.
     *
     *  By default this is 0, meaning any losses would cause a harvest which
     *  will subsequently report the loss to the Vault for tracking. (See
     *  `harvestTrigger()` for more details.)
     *
     *  This may only be called by governance or the strategist.
     * @param _debtThreshold How big of a loss this Strategy may carry without
     * being required to report to the Vault.
     */
    function setDebtThreshold(uint256 _debtThreshold) external onlyAuthorized {
        debtThreshold = _debtThreshold;
        emit UpdatedDebtThreshold(_debtThreshold);
    }

    /**
     * @notice
     *  Used to change `metadataURI`. `metadataURI` is used to store the URI
     * of the file describing the strategy.
     *
     *  This may only be called by governance or the strategist.
     * @param _metadataURI The URI that describe the strategy.
     */
    function setMetadataURI(string calldata _metadataURI) external onlyAuthorized {
        metadataURI = _metadataURI;
        emit UpdatedMetadataURI(_metadataURI);
    }

    /**
     * Resolve governance address from Vault contract, used to make assertions
     * on protected functions in the Strategy.
     */
    function governance() internal view returns (address) {
        return vault.governance();
    }

    /**
     * @notice
     *  Provide an accurate conversion from `_amtInWei` (denominated in wei)
     *  to `want` (using the native decimal characteristics of `want`).
     * @dev
     *  Care must be taken when working with decimals to assure that the conversion
     *  is compatible. As an example:
     *
     *      given 1e17 wei (0.1 ETH) as input, and want is USDC (6 decimals),
     *      with USDC/ETH = 1800, this should give back 1800000000 (180 USDC)
     *
     * @param _amtInWei The amount (in wei/1e-18 ETH) to convert to `want`
     * @return The amount in `want` of `_amtInEth` converted to `want`
     **/
    function ethToWant(uint256 _amtInWei) public view virtual returns (uint256);

    /**
     * @notice
     *  Provide an accurate estimate for the total amount of assets
     *  (principle + return) that this Strategy is currently managing,
     *  denominated in terms of `want` tokens.
     *
     *  This total should be "realizable" e.g. the total value that could
     *  *actually* be obtained from this Strategy if it were to divest its
     *  entire position based on current on-chain conditions.
     * @dev
     *  Care must be taken in using this function, since it relies on external
     *  systems, which could be manipulated by the attacker to give an inflated
     *  (or reduced) value produced by this function, based on current on-chain
     *  conditions (e.g. this function is possible to influence through
     *  flashloan attacks, oracle manipulations, or other DeFi attack
     *  mechanisms).
     *
     *  It is up to governance to use this function to correctly order this
     *  Strategy relative to its peers in the withdrawal queue to minimize
     *  losses for the Vault based on sudden withdrawals. This value should be
     *  higher than the total debt of the Strategy and higher than its expected
     *  value to be "safe".
     * @return The estimated total assets in this Strategy.
     */
    function estimatedTotalAssets() public view virtual returns (uint256);

    /*
     * @notice
     *  Provide an indication of whether this strategy is currently "active"
     *  in that it is managing an active position, or will manage a position in
     *  the future. This should correlate to `harvest()` activity, so that Harvest
     *  events can be tracked externally by indexing agents.
     * @return True if the strategy is actively managing a position.
     */
    function isActive() public view returns (bool) {
        return vault.strategies(address(this)).debtRatio > 0 || estimatedTotalAssets() > 0;
    }

    /**
     * Perform any Strategy unwinding or other calls necessary to capture the
     * "free return" this Strategy has generated since the last time its core
     * position(s) were adjusted. Examples include unwrapping extra rewards.
     * This call is only used during "normal operation" of a Strategy, and
     * should be optimized to minimize losses as much as possible.
     *
     * This method returns any realized profits and/or realized losses
     * incurred, and should return the total amounts of profits/losses/debt
     * payments (in `want` tokens) for the Vault's accounting (e.g.
     * `want.balanceOf(this) >= _debtPayment + _profit`).
     *
     * `_debtOutstanding` will be 0 if the Strategy is not past the configured
     * debt limit, otherwise its value will be how far past the debt limit
     * the Strategy is. The Strategy's debt limit is configured in the Vault.
     *
     * NOTE: `_debtPayment` should be less than or equal to `_debtOutstanding`.
     *       It is okay for it to be less than `_debtOutstanding`, as that
     *       should only used as a guide for how much is left to pay back.
     *       Payments should be made to minimize loss from slippage, debt,
     *       withdrawal fees, etc.
     *
     * See `vault.debtOutstanding()`.
     */
    function prepareReturn(uint256 _debtOutstanding)
        internal
        virtual
        returns (
            uint256 _profit,
            uint256 _loss,
            uint256 _debtPayment
        );

    /**
     * Perform any adjustments to the core position(s) of this Strategy given
     * what change the Vault made in the "investable capital" available to the
     * Strategy. Note that all "free capital" in the Strategy after the report
     * was made is available for reinvestment. Also note that this number
     * could be 0, and you should handle that scenario accordingly.
     *
     * See comments regarding `_debtOutstanding` on `prepareReturn()`.
     */
    function adjustPosition(uint256 _debtOutstanding) internal virtual;

    /**
     * Liquidate up to `_amountNeeded` of `want` of this strategy's positions,
     * irregardless of slippage. Any excess will be re-invested with `adjustPosition()`.
     * This function should return the amount of `want` tokens made available by the
     * liquidation. If there is a difference between them, `_loss` indicates whether the
     * difference is due to a realized loss, or if there is some other sitution at play
     * (e.g. locked funds) where the amount made available is less than what is needed.
     *
     * NOTE: The invariant `_liquidatedAmount + _loss <= _amountNeeded` should always be maintained
     */
    function liquidatePosition(uint256 _amountNeeded) internal virtual returns (uint256 _liquidatedAmount, uint256 _loss);

    /**
     * Liquidate everything and returns the amount that got freed.
     * This function is used during emergency exit instead of `prepareReturn()` to
     * liquidate all of the Strategy's positions back to the Vault.
     */

    function liquidateAllPositions() internal virtual returns (uint256 _amountFreed);

    /**
     * @notice
     *  Provide a signal to the keeper that `tend()` should be called. The
     *  keeper will provide the estimated gas cost that they would pay to call
     *  `tend()`, and this function should use that estimate to make a
     *  determination if calling it is "worth it" for the keeper. This is not
     *  the only consideration into issuing this trigger, for example if the
     *  position would be negatively affected if `tend()` is not called
     *  shortly, then this can return `true` even if the keeper might be
     *  "at a loss" (keepers are always reimbursed by Yearn).
     * @dev
     *  `callCostInWei` must be priced in terms of `wei` (1e-18 ETH).
     *
     *  This call and `harvestTrigger()` should never return `true` at the same
     *  time.
     * @param callCostInWei The keeper's estimated gas cost to call `tend()` (in wei).
     * @return `true` if `tend()` should be called, `false` otherwise.
     */
    function tendTrigger(uint256 callCostInWei) public view virtual returns (bool) {
        // We usually don't need tend, but if there are positions that need
        // active maintainence, overriding this function is how you would
        // signal for that.
        // If your implementation uses the cost of the call in want, you can
        // use uint256 callCost = ethToWant(callCostInWei);

        return false;
    }

    /**
     * @notice
     *  Adjust the Strategy's position. The purpose of tending isn't to
     *  realize gains, but to maximize yield by reinvesting any returns.
     *
     *  See comments on `adjustPosition()`.
     *
     *  This may only be called by governance, the strategist, or the keeper.
     */
    function tend() external onlyKeepers {
        // Don't take profits with this call, but adjust for better gains
        adjustPosition(vault.debtOutstanding());
    }

    /**
     * @notice
     *  Provide a signal to the keeper that `harvest()` should be called. The
     *  keeper will provide the estimated gas cost that they would pay to call
     *  `harvest()`, and this function should use that estimate to make a
     *  determination if calling it is "worth it" for the keeper. This is not
     *  the only consideration into issuing this trigger, for example if the
     *  position would be negatively affected if `harvest()` is not called
     *  shortly, then this can return `true` even if the keeper might be "at a
     *  loss" (keepers are always reimbursed by Yearn).
     * @dev
     *  `callCostInWei` must be priced in terms of `wei` (1e-18 ETH).
     *
     *  This call and `tendTrigger` should never return `true` at the
     *  same time.
     *
     *  See `min/maxReportDelay`, `profitFactor`, `debtThreshold` to adjust the
     *  strategist-controlled parameters that will influence whether this call
     *  returns `true` or not. These parameters will be used in conjunction
     *  with the parameters reported to the Vault (see `params`) to determine
     *  if calling `harvest()` is merited.
     *
     *  It is expected that an external system will check `harvestTrigger()`.
     *  This could be a script run off a desktop or cloud bot (e.g.
     *  https://github.com/iearn-finance/yearn-vaults/blob/main/scripts/keep.py),
     *  or via an integration with the Keep3r network (e.g.
     *  https://github.com/Macarse/GenericKeep3rV2/blob/master/contracts/keep3r/GenericKeep3rV2.sol).
     * @param callCostInWei The keeper's estimated gas cost to call `harvest()` (in wei).
     * @return `true` if `harvest()` should be called, `false` otherwise.
     */
    function harvestTrigger(uint256 callCostInWei) public view virtual returns (bool) {
        uint256 callCost = ethToWant(callCostInWei);
        StrategyParams memory params = vault.strategies(address(this));

        // Should not trigger if Strategy is not activated
        if (params.activation == 0) return false;

        // Should not trigger if we haven't waited long enough since previous harvest
        if (block.timestamp.sub(params.lastReport) < minReportDelay) return false;

        // Should trigger if hasn't been called in a while
        if (block.timestamp.sub(params.lastReport) >= maxReportDelay) return true;

        // If some amount is owed, pay it back
        // NOTE: Since debt is based on deposits, it makes sense to guard against large
        //       changes to the value from triggering a harvest directly through user
        //       behavior. This should ensure reasonable resistance to manipulation
        //       from user-initiated withdrawals as the outstanding debt fluctuates.
        uint256 outstanding = vault.debtOutstanding();
        if (outstanding > debtThreshold) return true;

        // Check for profits and losses
        uint256 total = estimatedTotalAssets();
        // Trigger if we have a loss to report
        if (total.add(debtThreshold) < params.totalDebt) return true;

        uint256 profit = 0;
        if (total > params.totalDebt) profit = total.sub(params.totalDebt); // We've earned a profit!

        // Otherwise, only trigger if it "makes sense" economically (gas cost
        // is <N% of value moved)
        uint256 credit = vault.creditAvailable();
        return (profitFactor.mul(callCost) < credit.add(profit));
    }

    /**
     * @notice
     *  Harvests the Strategy, recognizing any profits or losses and adjusting
     *  the Strategy's position.
     *
     *  In the rare case the Strategy is in emergency shutdown, this will exit
     *  the Strategy's position.
     *
     *  This may only be called by governance, the strategist, or the keeper.
     * @dev
     *  When `harvest()` is called, the Strategy reports to the Vault (via
     *  `vault.report()`), so in some cases `harvest()` must be called in order
     *  to take in profits, to borrow newly available funds from the Vault, or
     *  otherwise adjust its position. In other cases `harvest()` must be
     *  called to report to the Vault on the Strategy's position, especially if
     *  any losses have occurred.
     */
    function harvest() external onlyKeepers {
        uint256 profit = 0;
        uint256 loss = 0;
        uint256 debtOutstanding = vault.debtOutstanding();
        uint256 debtPayment = 0;
        if (emergencyExit) {
            // Free up as much capital as possible
            uint256 amountFreed = liquidateAllPositions();
            if (amountFreed < debtOutstanding) {
                loss = debtOutstanding.sub(amountFreed);
            } else if (amountFreed > debtOutstanding) {
                profit = amountFreed.sub(debtOutstanding);
            }
            debtPayment = debtOutstanding.sub(loss);
        } else {
            // Free up returns for Vault to pull
            (profit, loss, debtPayment) = prepareReturn(debtOutstanding);
        }

        // Allow Vault to take up to the "harvested" balance of this contract,
        // which is the amount it has earned since the last time it reported to
        // the Vault.
        uint256 totalDebt = vault.strategies(address(this)).totalDebt;
        debtOutstanding = vault.report(profit, loss, debtPayment);

        // Check if free returns are left, and re-invest them
        adjustPosition(debtOutstanding);

        // call healthCheck contract
        if (doHealthCheck && healthCheck != address(0)) {
            require(HealthCheck(healthCheck).check(profit, loss, debtPayment, debtOutstanding, totalDebt), "!healthcheck");
        } else {
            emit SetDoHealthCheck(true);
            doHealthCheck = true;
        }

        emit Harvested(profit, loss, debtPayment, debtOutstanding);
    }

    /**
     * @notice
     *  Withdraws `_amountNeeded` to `vault`.
     *
     *  This may only be called by the Vault.
     * @param _amountNeeded How much `want` to withdraw.
     * @return _loss Any realized losses
     */
    function withdraw(uint256 _amountNeeded) external returns (uint256 _loss) {
        require(msg.sender == address(vault), "!vault");
        // Liquidate as much as possible to `want`, up to `_amountNeeded`
        uint256 amountFreed;
        (amountFreed, _loss) = liquidatePosition(_amountNeeded);
        // Send it directly back (NOTE: Using `msg.sender` saves some gas here)
        want.safeTransfer(msg.sender, amountFreed);
        // NOTE: Reinvest anything leftover on next `tend`/`harvest`
    }

    /**
     * Do anything necessary to prepare this Strategy for migration, such as
     * transferring any reserve or LP tokens, CDPs, or other tokens or stores of
     * value.
     */
    function prepareMigration(address _newStrategy) internal virtual;

    /**
     * @notice
     *  Transfers all `want` from this Strategy to `_newStrategy`.
     *
     *  This may only be called by the Vault.
     * @dev
     * The new Strategy's Vault must be the same as this Strategy's Vault.
     *  The migration process should be carefully performed to make sure all
     * the assets are migrated to the new address, which should have never
     * interacted with the vault before.
     * @param _newStrategy The Strategy to migrate to.
     */
    function migrate(address _newStrategy) external {
        require(msg.sender == address(vault));
        require(BaseStrategy(_newStrategy).vault() == vault);
        prepareMigration(_newStrategy);
        want.safeTransfer(_newStrategy, want.balanceOf(address(this)));
    }

    /**
     * @notice
     *  Activates emergency exit. Once activated, the Strategy will exit its
     *  position upon the next harvest, depositing all funds into the Vault as
     *  quickly as is reasonable given on-chain conditions.
     *
     *  This may only be called by governance or the strategist.
     * @dev
     *  See `vault.setEmergencyShutdown()` and `harvest()` for further details.
     */
    function setEmergencyExit() external onlyEmergencyAuthorized {
        emergencyExit = true;
        vault.revokeStrategy();

        emit EmergencyExitEnabled();
    }

    /**
     * Override this to add all tokens/tokenized positions this contract
     * manages on a *persistent* basis (e.g. not just for swapping back to
     * want ephemerally).
     *
     * NOTE: Do *not* include `want`, already included in `sweep` below.
     *
     * Example:
     * ```
     *    function protectedTokens() internal override view returns (address[] memory) {
     *      address[] memory protected = new address[](3);
     *      protected[0] = tokenA;
     *      protected[1] = tokenB;
     *      protected[2] = tokenC;
     *      return protected;
     *    }
     * ```
     */
    function protectedTokens() internal view virtual returns (address[] memory);

    /**
     * @notice
     *  Removes tokens from this Strategy that are not the type of tokens
     *  managed by this Strategy. This may be used in case of accidentally
     *  sending the wrong kind of token to this Strategy.
     *
     *  Tokens will be sent to `governance()`.
     *
     *  This will fail if an attempt is made to sweep `want`, or any tokens
     *  that are protected by this Strategy.
     *
     *  This may only be called by governance.
     * @dev
     *  Implement `protectedTokens()` to specify any additional tokens that
     *  should be protected from sweeping in addition to `want`.
     * @param _token The token to transfer out of this vault.
     */
    function sweep(address _token) external onlyGovernance {
        require(_token != address(want), "!want");
        require(_token != address(vault), "!shares");

        address[] memory _protectedTokens = protectedTokens();
        for (uint256 i; i < _protectedTokens.length; i++) require(_token != _protectedTokens[i], "!protected");

        IERC20(_token).safeTransfer(governance(), IERC20(_token).balanceOf(address(this)));
    }
}

abstract contract BaseStrategyInitializable is BaseStrategy {
    bool public isOriginal = true;
    event Cloned(address indexed clone);

    constructor(address _vault) public BaseStrategy(_vault) {}

    function initialize(
        address _vault,
        address _strategist,
        address _rewards,
        address _keeper
    ) external virtual {
        _initialize(_vault, _strategist, _rewards, _keeper);
    }

    function clone(address _vault) external returns (address) {
        require(isOriginal, "!clone");
        return this.clone(_vault, msg.sender, msg.sender, msg.sender);
    }

    function clone(
        address _vault,
        address _strategist,
        address _rewards,
        address _keeper
    ) external returns (address newStrategy) {
        // Copied from https://github.com/optionality/clone-factory/blob/master/contracts/CloneFactory.sol
        bytes20 addressBytes = bytes20(address(this));

        assembly {
            // EIP-1167 bytecode
            let clone_code := mload(0x40)
            mstore(clone_code, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(clone_code, 0x14), addressBytes)
            mstore(add(clone_code, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            newStrategy := create(0, clone_code, 0x37)
        }

        BaseStrategyInitializable(newStrategy).initialize(_vault, _strategist, _rewards, _keeper);

        emit Cloned(newStrategy);
    }
}

// File: GenericLenderBase.sol

interface IBaseStrategy {
    function apiVersion() external pure returns (string memory);

    function name() external pure returns (string memory);

    function vault() external view returns (address);

    function keeper() external view returns (address);

    function tendTrigger(uint256 callCost) external view returns (bool);

    function tend() external;

    function harvestTrigger(uint256 callCost) external view returns (bool);

    function harvest() external;

    function strategist() external view returns(address);

    function management() external view returns (address);
}

abstract contract GenericLenderBase is IGenericLender {
    using SafeERC20 for IERC20;
    VaultAPI public vault;
    address public override strategy;
    IERC20 public want;
    string public override lenderName;
    uint256 public dust;

    event Cloned(address indexed clone);

    constructor(address _strategy, string memory _name) public {
        _initialize(_strategy, _name);
    }

    function _initialize(address _strategy, string memory _name) internal {
        require(address(strategy) == address(0), "Lender already initialized");

        strategy = _strategy;
        vault = VaultAPI(IBaseStrategy(strategy).vault());
        want = IERC20(vault.token());
        lenderName = _name;
        dust = 10000;

        want.safeApprove(_strategy, uint256(-1));
    }

    function initialize(address _strategy, string memory _name) external virtual {
        _initialize(_strategy, _name);
    }

    function _clone(address _strategy, string memory _name) internal returns (address newLender) {
        // Copied from https://github.com/optionality/clone-factory/blob/master/contracts/CloneFactory.sol
        bytes20 addressBytes = bytes20(address(this));

        assembly {
            // EIP-1167 bytecode
            let clone_code := mload(0x40)
            mstore(clone_code, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(clone_code, 0x14), addressBytes)
            mstore(add(clone_code, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            newLender := create(0, clone_code, 0x37)
        }

        GenericLenderBase(newLender).initialize(_strategy, _name);
        emit Cloned(newLender);
    }

    function setDust(uint256 _dust) external virtual override management {
        dust = _dust;
    }

    function sweep(address _token) external virtual override management {
        address[] memory _protectedTokens = protectedTokens();
        for (uint256 i; i < _protectedTokens.length; i++) require(_token != _protectedTokens[i], "!protected");

        IERC20(_token).safeTransfer(vault.governance(), IERC20(_token).balanceOf(address(this)));
    }

    function protectedTokens() internal view virtual returns (address[] memory);

    modifier management() {
        require(
            msg.sender == address(strategy) || msg.sender == vault.governance() || msg.sender == vault.management(),
            "!management"
        );
        _;
    }

    modifier onlyGovernance() {
        require(msg.sender == vault.governance(), "!gov");
        _;
    }
}

// File: GenericCompoundV3.sol

/********************
 *   A lender plugin for LenderYieldOptimiser for any base token erc20 asset on compoundV3
 *   Made by @Schlagonia
 *   https://github.com/Schlagonia/Yearn-V2-Generic-Lender/blob/main/contracts/GenericLender/GenericCompoundV3.sol
 *
 ********************* */

interface IBaseFee {
    function isCurrentBaseFeeAcceptable() external view returns (bool);
}

contract GenericCompoundV3 is GenericLenderBase {
    using Address for address;
    using SafeMath for uint256;

    //For apr calculations
    uint internal constant DAYS_PER_YEAR = 365;
    uint internal constant SECONDS_PER_DAY = 60 * 60 * 24;
    uint internal constant SECONDS_PER_YEAR = 365 days;

    //Rewards stuff
    //Uniswap v3 router
    ISwapRouter internal constant router =
        ISwapRouter(0xE592427A0AEce92De3Edee1F18E0157C05861564);
    //Fees for the V3 pools if the supply is incentivized
    uint24 public compToEthFee;
    uint24 public ethToWantFee;
    address internal constant comp = 
        0xc00e94Cb662C3520282E6f5717214004A7f26888;
    address internal constant weth = 
        0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
    address public tradeFactory;

    Comet public comet;
    CometRewards public constant rewardsContract = 
        CometRewards(0x1B0e765F6224C21223AeA2af16c1C46E38885a40); 

    // price feeds for the reward apr calculation, can be updated manually if needed
    address public rewardTokenPriceFeed;
    address public baseTokenPriceFeed;

    uint256 internal SCALER;

    uint256 public minCompToSell;
    uint256 public minRewardToHarvest;
    address public keep3r;

    constructor(
        address _strategy,
        string memory name,
        address _comet
    ) public GenericLenderBase(_strategy, name) {
        _initialize(_comet);
    }

    function initialize(address _comet) external {
        _initialize(_comet);
    }

    function _initialize(address _comet) internal {
        require(address(comet) == address(0), "already initialized");
        comet = Comet(_comet);
        require(comet.baseToken() == address(want), "wrong token");
        
        uint BASE_MANTISSA = comet.baseScale();
        uint BASE_INDEX_SCALE = comet.baseIndexScale();
        // this is needed for reward apr calculations based on decimals of want
        // we scale rewards per second to the base token decimals and diff between comp decimals and the index scale
        SCALER = BASE_MANTISSA.mul(1e18).div(BASE_INDEX_SCALE);

        want.safeApprove(_comet, type(uint256).max);
        IERC20(comp).safeApprove(address(router), type(uint256).max);

        // default to the base token feed given
        baseTokenPriceFeed = comet.baseTokenPriceFeed();
        // default to the compound/USD feed
        rewardTokenPriceFeed = 0xdbd020CAeF83eFd542f4De03e3cF0C28A4428bd5;

        minCompToSell = 0.05 ether;
        minRewardToHarvest = 10 ether;
    }

    function cloneCompoundV3Lender(
        address _strategy,
        string memory _name,
        address _comet
    ) external returns (address newLender) {
        newLender = _clone(_strategy, _name);
        GenericCompoundV3(newLender).initialize(_comet);
    }

    function setMinRewardAmounts(uint256 _minCompToSell, uint256 _minRewardToHavest) external management {
        minCompToSell = _minCompToSell;
        minRewardToHarvest = _minRewardToHavest;
    }

    //These will default to 0.
    //Will need to be manually set if want is incentized before any harvests
    function setUniFees(uint24 _compToEth, uint24 _ethToWant) external management {
        compToEthFee = _compToEth;
        ethToWantFee = _ethToWant;
    }

    function setPriceFeeds(address _baseTokenPriceFeed, address _rewardTokenPriceFeed) external management {
        // just check the call doesnt revert. We dont care about the amount returned 
        comet.getPrice(_baseTokenPriceFeed);
        comet.getPrice(_rewardTokenPriceFeed);
        baseTokenPriceFeed = _baseTokenPriceFeed;
        rewardTokenPriceFeed = _rewardTokenPriceFeed;
    }

    function setKeep3r(address _keep3r) external management {
        keep3r = _keep3r;
    }

    function nav() external view override returns (uint256) {
        return _nav();
    }

    function _nav() internal view returns (uint256) {
        return want.balanceOf(address(this)).add(underlyingBalanceStored());
    }

    function underlyingBalanceStored() public view returns (uint256) {
        return comet.balanceOf(address(this));
    }

    function apr() external view override returns (uint256) {
        return _apr();
    }

    function _apr() internal view returns (uint256) {
        uint utilization = comet.getUtilization();
        uint supplyRate = comet.getSupplyRate(utilization).mul(SECONDS_PER_YEAR);
        uint rewardRate = getRewardAprForSupplyBase(0);
        return uint256(supplyRate.add(rewardRate));
    }

    /*
    * Get the current reward for supplying APR in Compound III
    * @param newAmount Any amount that will be added to the total supply in a deposit
    * @return The reward APR in USD as a decimal scaled up by 1e18
    */
    function getRewardAprForSupplyBase(uint newAmount) public view returns (uint) {
        Comet _comet = comet;
        uint rewardToSuppliersPerDay = _comet.baseTrackingSupplySpeed().mul(SECONDS_PER_DAY).mul(SCALER);
        if(rewardToSuppliersPerDay == 0) return 0;

        uint rewardTokenPriceInUsd = _comet.getPrice(rewardTokenPriceFeed);
        uint wantPriceInUsd = _comet.getPrice(baseTokenPriceFeed);
        uint wantTotalSupply = _comet.totalSupply().add(newAmount);
        return rewardTokenPriceInUsd.mul(rewardToSuppliersPerDay).mul(DAYS_PER_YEAR).div(wantTotalSupply.mul(wantPriceInUsd));
    }

    function weightedApr() external view override returns (uint256) {
        uint256 a = _apr();
        return a.mul(_nav());
    }

    function withdraw(uint256 amount) external override management returns (uint256) {
        return _withdraw(amount);
    }

    //emergency withdraw. sends balance plus amount to governance
    //Pass in uint256.max to withdraw everything
    function emergencyWithdraw(uint256 amount) external override onlyGovernance {
        //dont care about errors here. we want to exit what we can
        comet.withdraw(address(want), amount);

        want.safeTransfer(vault.governance(), want.balanceOf(address(this)));
    }

    //withdraw an amount including any want balance
    function _withdraw(uint256 amount) internal returns (uint256) { 
        //Accrue rewards and interest to the lender so all following calls are acurate
        comet.accrueAccount(address(this));
        uint256 balanceUnderlying = underlyingBalanceStored();
        uint256 looseBalance = want.balanceOf(address(this));
        uint256 total = balanceUnderlying.add(looseBalance);

        if (amount > total) {
            //cant withdraw more than we own
            amount = total;
        }

        if (looseBalance >= amount) {
            want.safeTransfer(address(strategy), amount);
            return amount;
        }

        uint256 liquidity = comet.totalSupply().sub(comet.totalBorrow());

        if (liquidity > 1) {
            uint256 toWithdraw = amount.sub(looseBalance);

            if (toWithdraw <= liquidity) {
                //we can take all
                comet.withdraw(address(want), toWithdraw);
            } else {
                //take all we can
                comet.withdraw(address(want), liquidity);
            }
        }
        looseBalance = want.balanceOf(address(this));
        want.safeTransfer(address(strategy), looseBalance);
        return looseBalance;
    }

    function harvest() external keepers {
        _claimCometRewards();

        _disposeOfComp();

        uint256 wantBalance = want.balanceOf(address(this));
        if(wantBalance > 0) {
            comet.supply(address(want), wantBalance);
        }
    }

    function harvestTrigger(uint256 /*callCost*/) external view returns(bool) {
        if(!isBaseFeeAcceptable()) return false;

        if(getRewardsOwed().add(IERC20(comp).balanceOf(address(this))) > minRewardToHarvest) return true;
    }
  
    /*
    * Gets the amount of reward tokens due to this contract address
    */
    function getRewardsOwed() public view returns (uint) {
        CometStructs.RewardConfig memory config = rewardsContract.rewardConfig(address(comet));
        uint256 accrued = comet.baseTrackingAccrued(address(this));
        if (config.shouldUpscale) {
            accrued *= config.rescaleFactor;
        } else {
            accrued /= config.rescaleFactor;
        }
        uint256 claimed = rewardsContract.rewardsClaimed(address(comet), address(this));

        return accrued > claimed ? accrued - claimed : 0;
    }

    /*
    * External function that Claims the reward tokens due to this contract address
    */
    function claimCometRewards() external keepers {
        _claimCometRewards();
    }

    /*
    * Claims the reward tokens due to this contract address
    */
    function _claimCometRewards() internal {
        rewardsContract.claim(address(comet), address(this), true);
    }

    function _disposeOfComp() internal {
        //check for Trade Factory implementation or that Uni fees are not set
        if(tradeFactory != address(0) || compToEthFee == 0) return;

        uint256 _comp = IERC20(comp).balanceOf(address(this));

        if (_comp > minCompToSell) {

            if(address(want) == weth) {
                ISwapRouter.ExactInputSingleParams memory params =
                    ISwapRouter.ExactInputSingleParams(
                        comp, // tokenIn
                        address(want), // tokenOut
                        compToEthFee, // comp-eth fee
                        address(this), // recipient
                        now, // deadline
                        _comp, // amountIn
                        0, // amountOut
                        0 // sqrtPriceLimitX96
                    );

                router.exactInputSingle(params);
            
            } else {
                bytes memory path =
                    abi.encodePacked(
                        comp, // comp-ETH
                        compToEthFee,
                        weth, // ETH-want
                        ethToWantFee,
                        address(want)
                    );

                // Proceeds from Comp are not subject to minExpectedSwapPercentage
                // so they could get sandwiched if we end up in an uncle block
                router.exactInput(
                    ISwapRouter.ExactInputParams(
                        path,
                        address(this),
                        now,
                        _comp,
                        0
                    )
                );
            }
        }
    }

    function deposit() external override management {
        uint256 balance = want.balanceOf(address(this));
        comet.supply(address(want), balance);
    }

    function withdrawAll() external override management returns (bool) {
        comet.accrueAccount(address(this));
        uint256 invested = _nav();
        uint256 returned = _withdraw(invested);
        return returned >= invested;
    }

    function hasAssets() external view override returns (bool) {
        return comet.balanceOf(address(this)) > 0 || want.balanceOf(address(this)) > 0;
    }

    function aprAfterDeposit(uint256 amount) external view override returns (uint256) {
        uint256 borrows = comet.totalBorrow();
        uint256 supply = comet.totalSupply();

        uint256 newUtilization = borrows.mul(1e18).div(supply.add(amount));
        uint256 newSupply = comet.getSupplyRate(newUtilization).mul(SECONDS_PER_YEAR);

        uint256 newReward = getRewardAprForSupplyBase(amount);
        return newSupply.add(newReward);
    }

    function protectedTokens() internal view override returns (address[] memory) {
        address[] memory protected = new address[](1);
        protected[0] = address(want);
        return protected;
    }

    modifier keepers() {
        require(
            msg.sender == address(keep3r) || msg.sender == address(strategy) || msg.sender == vault.governance() || msg.sender == IBaseStrategy(strategy).strategist(),
            "!keepers"
        );
        _;
    }

    // check if the current baseFee is below our external target
    function isBaseFeeAcceptable() internal view returns (bool) {
        return
            IBaseFee(0xb5e1CAcB567d98faaDB60a1fD4820720141f064F)
                .isCurrentBaseFeeAcceptable();
    }
   
    // ---------------------- YSWAPS FUNCTIONS ----------------------
    function setTradeFactory(address _tradeFactory) external onlyGovernance {
        if (tradeFactory != address(0)) {
            _removeTradeFactoryPermissions();
        }

        ITradeFactory tf = ITradeFactory(_tradeFactory);

        IERC20(comp).safeApprove(_tradeFactory, type(uint256).max);
        tf.enable(comp, address(want));
        
        tradeFactory = _tradeFactory;
    }

    function removeTradeFactoryPermissions() external management {
        _removeTradeFactoryPermissions();
    }

    function _removeTradeFactoryPermissions() internal {
        IERC20(comp).safeApprove(tradeFactory, 0);
        ITradeFactory(tradeFactory).disable(comp, address(want));
        tradeFactory = address(0);
    }
}