Skip to content

Latest commit

 

History

History
32 lines (29 loc) · 964 Bytes

README.md

File metadata and controls

32 lines (29 loc) · 964 Bytes
Raw

ROCKPro64 Fan Controller

This system is a Python-based service for controlling the fan connected to the PWM FAN connector on the ROCKPro64 SMB. The fan speed is configurable as a text file to optimize for thermals or noise.

Installing

Installing can be done with the following:

git clone https://github.com/TheNexusAvenger/ROCKPro64-Fan-Controller.git

cd ROCKPro64-Fan-Controller

chmod +x ./*.sh

sudo ./Installer.sh

Uninstalling

Uninstalling can be done with the following:

sudo ./Uninstaller.sh

Customizing The Fan Curve

By default, the fan curve file is in /etc/FanControl/FanCurve.txt. Each line contains a fan curve point, with the first number being the temperature in celsius and the second number is the relative fan speed as a decimal. Note that the fan will be off if set below 0.25. The following is a fan curve with 25% at 60°C, 60% at 90°C, and 100% at 100°C:

59,0
60,0.25
90,0.6
100,1