diff --git a/resources/definitions/eazao_m500.def.json b/resources/definitions/eazao_m500.def.json new file mode 100644 index 00000000000..70ab78a5a66 --- /dev/null +++ b/resources/definitions/eazao_m500.def.json @@ -0,0 +1,74 @@ +{ + "version": 2, + "name": "Eazao M500", + "inherits": "fdmprinter", + "metadata": + { + "visible": true, + "author": "Eazao", + "manufacturer": "Eazao", + "file_formats": "text/x-gcode", + "has_machine_quality": false, + "has_materials": false, + "machine_extruder_trains": { "0": "eazao_m500_extruder_0" }, + "preferred_quality_type": "normal" + }, + "overrides": + { + "acceleration_print": { "value": 300 }, + "acceleration_travel": { "value": 300 }, + "adhesion_type": { "default_value": "'none'" }, + "bottom_layers": { "value": 2 }, + "cool_fan_enabled": { "value": false }, + "infill_sparse_density": { "value": 0 }, + "initial_bottom_layers": { "value": 2 }, + "jerk_print": { "value": 10 }, + "jerk_travel": { "value": "jerk_print" }, + "jerk_travel_layer_0": { "value": "jerk_travel" }, + "layer_height": { "value": 1.0 }, + "layer_height_0": { "value": 1.0 }, + "line_width": { "value": 3.0 }, + "machine_acceleration": { "value": 300 }, + "machine_center_is_zero": { "default_value": false }, + "machine_depth": { "default_value": 320 }, + "machine_end_gcode": { "default_value": "G92 Z0\nG1 F1500 Z10\nG28 X0 Y300 ;move X Y to min endstops\nM82\nM84 ;steppers off\n" }, + "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, + "machine_heated_bed": { "default_value": false }, + "machine_height": { "default_value": 520 }, + "machine_max_acceleration_e": { "value": 500 }, + "machine_max_acceleration_x": { "value": 500 }, + "machine_max_acceleration_y": { "value": 500 }, + "machine_max_acceleration_z": { "value": 50 }, + "machine_max_feedrate_e": { "value": 25 }, + "machine_max_feedrate_x": { "value": 100 }, + "machine_max_feedrate_y": { "value": 100 }, + "machine_max_feedrate_z": { "value": 5 }, + "machine_max_jerk_e": { "value": 5 }, + "machine_max_jerk_xy": { "value": 10 }, + "machine_max_jerk_z": { "value": 0.3 }, + "machine_name": { "default_value": "Eazao M500" }, + "machine_start_gcode": { "default_value": "G21 ;set units to millimeters\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ;Home\nG1 Z25.0 F1500 ;move the platform down 15mm\nG92 E0 ;extruder reset\nG1 F300 E5\nG92 E0 ;The extruder is forced to zero again\nM302\nM163 S0 P0.85; Set Mix Factor\nM163 S1 P0.15; Set Mix Factor\nM164 S0" }, + "machine_width": { "default_value": 320 }, + "magic_spiralize": { "value": true }, + "material_final_print_temperature": { "value": "0" }, + "material_initial_print_temperature": { "value": "0" }, + "material_print_temperature": { "value": "0" }, + "material_print_temperature_layer_0": { "value": "0" }, + "optimize_wall_printing_order": { "value": "True" }, + "retraction_amount": { "value": 7 }, + "retraction_combing": { "value": "'noskin'" }, + "retraction_count_max": { "value": 100 }, + "retraction_enable": { "value": false }, + "retraction_extrusion_window": { "value": 10 }, + "retraction_hop": { "value": 0.2 }, + "speed_print": { "value": 20.0 }, + "speed_travel": { "value": 20.0 }, + "speed_wall": { "value": 20.0 }, + "speed_wall_0": { "value": 20.0 }, + "speed_wall_x": { "value": 20.0 }, + "speed_z_hop": { "value": "machine_max_feedrate_z" }, + "top_bottom_pattern": { "value": "concentric" }, + "top_bottom_thickness": { "value": 3 }, + "wall_thickness": { "value": 5.0 } + } +} \ No newline at end of file diff --git a/resources/definitions/eazao_m600.def.json b/resources/definitions/eazao_m600.def.json new file mode 100644 index 00000000000..35a946e25e5 --- /dev/null +++ b/resources/definitions/eazao_m600.def.json @@ -0,0 +1,74 @@ +{ + "version": 2, + "name": "Eazao M600", + "inherits": "fdmprinter", + "metadata": + { + "visible": true, + "author": "Eazao", + "manufacturer": "Eazao", + "file_formats": "text/x-gcode", + "has_machine_quality": false, + "has_materials": false, + "machine_extruder_trains": { "0": "eazao_m600_extruder_0" }, + "preferred_quality_type": "normal" + }, + "overrides": + { + "acceleration_print": { "value": 300 }, + "acceleration_travel": { "value": 300 }, + "adhesion_type": { "default_value": "'none'" }, + "bottom_layers": { "value": 2 }, + "cool_fan_enabled": { "value": false }, + "infill_sparse_density": { "value": 0 }, + "initial_bottom_layers": { "value": 2 }, + "jerk_print": { "value": 10 }, + "jerk_travel": { "value": "jerk_print" }, + "jerk_travel_layer_0": { "value": "jerk_travel" }, + "layer_height": { "value": 1.0 }, + "layer_height_0": { "value": 1.0 }, + "line_width": { "value": 3.0 }, + "machine_acceleration": { "value": 300 }, + "machine_center_is_zero": { "default_value": false }, + "machine_depth": { "default_value": 420 }, + "machine_end_gcode": { "default_value": "G92 Z0\nG1 F1500 Z10\nG28 X0 Y400 ;move X Y to min endstops\nM82\nM84 ;steppers off\n" }, + "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, + "machine_heated_bed": { "default_value": false }, + "machine_height": { "default_value": 620 }, + "machine_max_acceleration_e": { "value": 500 }, + "machine_max_acceleration_x": { "value": 500 }, + "machine_max_acceleration_y": { "value": 500 }, + "machine_max_acceleration_z": { "value": 50 }, + "machine_max_feedrate_e": { "value": 25 }, + "machine_max_feedrate_x": { "value": 100 }, + "machine_max_feedrate_y": { "value": 100 }, + "machine_max_feedrate_z": { "value": 5 }, + "machine_max_jerk_e": { "value": 5 }, + "machine_max_jerk_xy": { "value": 10 }, + "machine_max_jerk_z": { "value": 0.3 }, + "machine_name": { "default_value": "Eazao M600" }, + "machine_start_gcode": { "default_value": "G21 ;set units to millimeters\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ;Home\nG1 Z25.0 F1500 ;move the platform down 15mm\nG92 E0 ;extruder reset\nG1 F300 E5\nG92 E0 ;The extruder is forced to zero again\nM302\nM163 S0 P0.87; Set Mix Factor\nM163 S1 P0.13; Set Mix Factor\nM164 S0" }, + "machine_width": { "default_value": 420 }, + "magic_spiralize": { "value": true }, + "material_final_print_temperature": { "value": "0" }, + "material_initial_print_temperature": { "value": "0" }, + "material_print_temperature": { "value": "0" }, + "material_print_temperature_layer_0": { "value": "0" }, + "optimize_wall_printing_order": { "value": "True" }, + "retraction_amount": { "value": 7 }, + "retraction_combing": { "value": "'noskin'" }, + "retraction_count_max": { "value": 100 }, + "retraction_enable": { "value": false }, + "retraction_extrusion_window": { "value": 10 }, + "retraction_hop": { "value": 0.2 }, + "speed_print": { "value": 20.0 }, + "speed_travel": { "value": 20.0 }, + "speed_wall": { "value": 20.0 }, + "speed_wall_0": { "value": 20.0 }, + "speed_wall_x": { "value": 20.0 }, + "speed_z_hop": { "value": "machine_max_feedrate_z" }, + "top_bottom_pattern": { "value": "concentric" }, + "top_bottom_thickness": { "value": 3 }, + "wall_thickness": { "value": 5.0 } + } +} \ No newline at end of file diff --git a/resources/definitions/eazao_m700.def.json b/resources/definitions/eazao_m700.def.json new file mode 100644 index 00000000000..8459b3625da --- /dev/null +++ b/resources/definitions/eazao_m700.def.json @@ -0,0 +1,74 @@ +{ + "version": 2, + "name": "Eazao M700", + "inherits": "fdmprinter", + "metadata": + { + "visible": true, + "author": "Eazao", + "manufacturer": "Eazao", + "file_formats": "text/x-gcode", + "has_machine_quality": false, + "has_materials": false, + "machine_extruder_trains": { "0": "eazao_m700_extruder_0" }, + "preferred_quality_type": "normal" + }, + "overrides": + { + "acceleration_print": { "value": 300 }, + "acceleration_travel": { "value": 300 }, + "adhesion_type": { "default_value": "none" }, + "bottom_layers": { "value": 2 }, + "cool_fan_enabled": { "value": false }, + "infill_sparse_density": { "value": 0 }, + "initial_bottom_layers": { "value": 2 }, + "jerk_print": { "value": 10 }, + "jerk_travel": { "value": "jerk_print" }, + "jerk_travel_layer_0": { "value": "jerk_travel" }, + "layer_height": { "value": 1.0 }, + "layer_height_0": { "value": 1.0 }, + "line_width": { "value": 3.0 }, + "machine_acceleration": { "value": 300 }, + "machine_center_is_zero": { "default_value": false }, + "machine_depth": { "default_value": 520 }, + "machine_end_gcode": { "default_value": "G92 Z0\nG1 F1500 Z10\nG28 X0 Y500 ;move X Y to min endstops\nM82\nM84 ;steppers off\n" }, + "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, + "machine_heated_bed": { "default_value": false }, + "machine_height": { "default_value": 720 }, + "machine_max_acceleration_e": { "value": 500 }, + "machine_max_acceleration_x": { "value": 500 }, + "machine_max_acceleration_y": { "value": 500 }, + "machine_max_acceleration_z": { "value": 50 }, + "machine_max_feedrate_e": { "value": 25 }, + "machine_max_feedrate_x": { "value": 100 }, + "machine_max_feedrate_y": { "value": 100 }, + "machine_max_feedrate_z": { "value": 5 }, + "machine_max_jerk_e": { "value": 5 }, + "machine_max_jerk_xy": { "value": 10 }, + "machine_max_jerk_z": { "value": 0.3 }, + "machine_name": { "default_value": "Eazao M700" }, + "machine_start_gcode": { "default_value": "G21 ;set units to millimeters\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ;Home\nG1 Z25.0 F1500 ;move the platform down 15mm\nG92 E0 ;extruder reset\nG1 F300 E5\nG92 E0 ;The extruder is forced to zero again\nM302\nM163 S0 P0.87; Set Mix Factor\nM163 S1 P0.13; Set Mix Factor\nM164 S0" }, + "machine_width": { "default_value": 520 }, + "magic_spiralize": { "value": true }, + "material_final_print_temperature": { "value": "0" }, + "material_initial_print_temperature": { "value": "0" }, + "material_print_temperature": { "value": "0" }, + "material_print_temperature_layer_0": { "value": "0" }, + "optimize_wall_printing_order": { "value": "True" }, + "retraction_amount": { "value": 7 }, + "retraction_combing": { "value": "'noskin'" }, + "retraction_count_max": { "value": 100 }, + "retraction_enable": { "value": false }, + "retraction_extrusion_window": { "value": 10 }, + "retraction_hop": { "value": 0.2 }, + "speed_print": { "value": 20.0 }, + "speed_travel": { "value": 20.0 }, + "speed_wall": { "value": 20.0 }, + "speed_wall_0": { "value": 20.0 }, + "speed_wall_x": { "value": 20.0 }, + "speed_z_hop": { "value": "machine_max_feedrate_z" }, + "top_bottom_pattern": { "value": "concentric" }, + "top_bottom_thickness": { "value": 3 }, + "wall_thickness": { "value": 5.0 } + } +} \ No newline at end of file diff --git a/resources/definitions/eazao_potter.def.json b/resources/definitions/eazao_potter.def.json new file mode 100644 index 00000000000..0ff84ab4291 --- /dev/null +++ b/resources/definitions/eazao_potter.def.json @@ -0,0 +1,74 @@ +{ + "version": 2, + "name": "Eazao Potter", + "inherits": "fdmprinter", + "metadata": + { + "visible": true, + "author": "Eazao", + "manufacturer": "Eazao", + "file_formats": "text/x-gcode", + "has_machine_quality": false, + "has_materials": false, + "machine_extruder_trains": { "0": "eazao_potter_extruder_0" }, + "preferred_quality_type": "normal" + }, + "overrides": + { + "acceleration_print": { "value": 300 }, + "acceleration_travel": { "value": 300 }, + "adhesion_type": { "default_value": "'none'" }, + "bottom_layers": { "value": 3 }, + "cool_fan_enabled": { "value": false }, + "infill_sparse_density": { "value": 0 }, + "initial_bottom_layers": { "value": 3 }, + "jerk_print": { "value": 10 }, + "jerk_travel": { "value": "jerk_print" }, + "jerk_travel_layer_0": { "value": "jerk_travel" }, + "layer_height": { "value": 1.0 }, + "layer_height_0": { "value": 1.0 }, + "line_width": { "value": 3.0 }, + "machine_acceleration": { "value": 300 }, + "machine_center_is_zero": { "default_value": false }, + "machine_depth": { "default_value": 167 }, + "machine_end_gcode": { "default_value": "G92 Z0 E0\nG1 F1500 Z10 E-2\nM82\nM84 ;steppers off\n" }, + "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, + "machine_heated_bed": { "default_value": false }, + "machine_height": { "default_value": 280 }, + "machine_max_acceleration_e": { "value": 500 }, + "machine_max_acceleration_x": { "value": 500 }, + "machine_max_acceleration_y": { "value": 500 }, + "machine_max_acceleration_z": { "value": 50 }, + "machine_max_feedrate_e": { "value": 25 }, + "machine_max_feedrate_x": { "value": 100 }, + "machine_max_feedrate_y": { "value": 100 }, + "machine_max_feedrate_z": { "value": 5 }, + "machine_max_jerk_e": { "value": 5 }, + "machine_max_jerk_xy": { "value": 10 }, + "machine_max_jerk_z": { "value": 0.3 }, + "machine_name": { "default_value": "Eazao Potter" }, + "machine_start_gcode": { "default_value": "G21 ;set units to millimeters\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ;Home\nG1 Z25.0 F1500 ;move the platform down 25mm\nG92 E0 ;extruder reset\nG1 F1500 E2\nG92 E0 ;The extruder is forced to zero again\nM302\nM163 S0 P0.85; Set Mix Factor\nM163 S1 P0.15; Set Mix Factor\nM164 S0" }, + "machine_width": { "default_value": 167 }, + "magic_spiralize": { "value": true }, + "material_final_print_temperature": { "value": "0" }, + "material_initial_print_temperature": { "value": "0" }, + "material_print_temperature": { "value": "0" }, + "material_print_temperature_layer_0": { "value": "0" }, + "optimize_wall_printing_order": { "value": "True" }, + "retraction_amount": { "value": 7 }, + "retraction_combing": { "value": "'noskin'" }, + "retraction_count_max": { "value": 100 }, + "retraction_enable": { "value": false }, + "retraction_extrusion_window": { "value": 10 }, + "retraction_hop": { "value": 0.2 }, + "speed_print": { "value": 25.0 }, + "speed_travel": { "value": 25.0 }, + "speed_wall": { "value": 25.0 }, + "speed_wall_0": { "value": 25.0 }, + "speed_wall_x": { "value": 25.0 }, + "speed_z_hop": { "value": "machine_max_feedrate_z" }, + "top_bottom_pattern": { "value": "concentric" }, + "top_bottom_thickness": { "value": 3 }, + "wall_thickness": { "value": 3.0 } + } +} \ No newline at end of file diff --git a/resources/definitions/eazao_zero.def.json b/resources/definitions/eazao_zero.def.json index f849e25eb55..df6f4faa183 100644 --- a/resources/definitions/eazao_zero.def.json +++ b/resources/definitions/eazao_zero.def.json @@ -9,9 +9,8 @@ "manufacturer": "Eazao", "file_formats": "text/x-gcode", "has_machine_quality": false, - "has_materials": true, + "has_materials": false, "machine_extruder_trains": { "0": "eazao_zero_extruder_0" }, - "preferred_material": "generic_pla", "preferred_quality_type": "normal" }, "overrides": @@ -20,11 +19,10 @@ "acceleration_print": { "value": 300 }, "acceleration_travel": { "value": 300 }, "adhesion_type": { "default_value": "none" }, - "bottom_layers": { "value": 2 }, + "bottom_layers": { "value": 3 }, "cool_fan_enabled": { "value": false }, "infill_sparse_density": { "value": 0 }, - "initial_bottom_layers": { "value": 2 }, - "jerk_enabled": { "value": false }, + "initial_bottom_layers": { "value": 3 }, "jerk_print": { "value": 10 }, "jerk_travel": { "value": "jerk_print" }, "jerk_travel_layer_0": { "value": "jerk_travel" }, @@ -34,7 +32,7 @@ "machine_acceleration": { "value": 300 }, "machine_center_is_zero": { "default_value": false }, "machine_depth": { "default_value": 150 }, - "machine_end_gcode": { "default_value": "G92 E10\nG1 E-10 F300\nG28 X0 Y0 ;move X Y to min endstops\nM82\nM84 ;steppers off\n" }, + "machine_end_gcode": { "default_value": "G92 Z0 E0\nG1 F1500 E-2\nG1 F1500 Z10\nG28 X0;move X Y to min endstops\nM82\nM84 ;steppers off\n" }, "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, "machine_heated_bed": { "default_value": false }, "machine_height": { "default_value": 240 }, @@ -49,9 +47,10 @@ "machine_max_jerk_e": { "value": 5 }, "machine_max_jerk_xy": { "value": 10 }, "machine_max_jerk_z": { "value": 0.3 }, - "machine_name": { "default_value": "EAZAO Zero" }, - "machine_start_gcode": { "default_value": "G21 \nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ;Home \nG1 Z15.0 F1500 ;move the platform down 15mm\nG92 E0 \nG1 F300 E10\nG92 E0\nM302\nM163 S0 P0.9; Set Mix Factor\nM163 S1 P0.1; Set Mix Factor\nM164 S0\n" }, + "machine_name": { "default_value": "Eazao Zero" }, + "machine_start_gcode": { "default_value": "G21 \nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ;Home \nG1 Z15.0 F1500 ;move the platform down 15mm\nG92 E0 \nG1 F1500 E2\nG92 E0\nM302\nM163 S0 P0.8; Set Mix Factor\nM163 S1 P0.2; Set Mix Factor\nM164 S0\n" }, "machine_width": { "default_value": 150 }, + "magic_spiralize": { "value": true }, "material_final_print_temperature": { "value": "0" }, "material_initial_print_temperature": { "value": "0" }, "material_print_temperature": { "value": "0" }, @@ -64,18 +63,10 @@ "retraction_enable": { "value": false }, "retraction_extrusion_window": { "value": 10 }, "retraction_hop": { "value": 0.2 }, - "retraction_hop_enabled": { "value": false }, - "retraction_speed": { "value": 25 }, - "speed_print": { "value": 20.0 }, - "speed_travel": { "value": 20.0 }, - "speed_wall": { "value": 20.0 }, - "speed_wall_0": { "value": 20.0 }, - "speed_wall_x": { "value": 20.0 }, + "speed_print": { "value": 25.0 }, "speed_z_hop": { "value": "machine_max_feedrate_z" }, - "top_bottom_thickness": { "value": 0 }, - "travel_avoid_other_parts": { "value": true }, - "travel_avoid_supports": { "value": false }, - "travel_retract_before_outer_wall": { "value": false }, + "top_bottom_pattern": { "value": "concentric" }, + "top_bottom_thickness": { "value": 3 }, "wall_thickness": { "value": 3.0 } } } \ No newline at end of file diff --git a/resources/extruders/eazao_m500_extruder_0.def.json b/resources/extruders/eazao_m500_extruder_0.def.json new file mode 100644 index 00000000000..6f95c06cc9e --- /dev/null +++ b/resources/extruders/eazao_m500_extruder_0.def.json @@ -0,0 +1,16 @@ +{ + "version": 2, + "name": "Extruder 1", + "inherits": "fdmextruder", + "metadata": + { + "machine": "eazao_m500", + "position": "0" + }, + "overrides": + { + "extruder_nr": { "default_value": 0 }, + "machine_nozzle_size": { "default_value": 2.3 }, + "material_diameter": { "default_value": 1.75 } + } +} \ No newline at end of file diff --git a/resources/extruders/eazao_m600_extruder_0.def.json b/resources/extruders/eazao_m600_extruder_0.def.json new file mode 100644 index 00000000000..bcbad3ab0fe --- /dev/null +++ b/resources/extruders/eazao_m600_extruder_0.def.json @@ -0,0 +1,16 @@ +{ + "version": 2, + "name": "Extruder 1", + "inherits": "fdmextruder", + "metadata": + { + "machine": "eazao_m600", + "position": "0" + }, + "overrides": + { + "extruder_nr": { "default_value": 0 }, + "machine_nozzle_size": { "default_value": 2.3 }, + "material_diameter": { "default_value": 1.75 } + } +} \ No newline at end of file diff --git a/resources/extruders/eazao_m700_extruder_0.def.json b/resources/extruders/eazao_m700_extruder_0.def.json new file mode 100644 index 00000000000..fada3551726 --- /dev/null +++ b/resources/extruders/eazao_m700_extruder_0.def.json @@ -0,0 +1,16 @@ +{ + "version": 2, + "name": "Extruder 1", + "inherits": "fdmextruder", + "metadata": + { + "machine": "eazao_m700", + "position": "0" + }, + "overrides": + { + "extruder_nr": { "default_value": 0 }, + "machine_nozzle_size": { "default_value": 2.3 }, + "material_diameter": { "default_value": 1.75 } + } +} \ No newline at end of file diff --git a/resources/extruders/eazao_potter_extruder_0.def.json b/resources/extruders/eazao_potter_extruder_0.def.json new file mode 100644 index 00000000000..e2c1451896b --- /dev/null +++ b/resources/extruders/eazao_potter_extruder_0.def.json @@ -0,0 +1,16 @@ +{ + "version": 2, + "name": "Extruder 1", + "inherits": "fdmextruder", + "metadata": + { + "machine": "eazao_potter", + "position": "0" + }, + "overrides": + { + "extruder_nr": { "default_value": 0 }, + "machine_nozzle_size": { "default_value": 1.6 }, + "material_diameter": { "default_value": 1.75 } + } +} \ No newline at end of file diff --git a/resources/extruders/eazao_zero_extruder_0.def.json b/resources/extruders/eazao_zero_extruder_0.def.json index 5d340083379..f4b958fba7a 100644 --- a/resources/extruders/eazao_zero_extruder_0.def.json +++ b/resources/extruders/eazao_zero_extruder_0.def.json @@ -10,7 +10,7 @@ "overrides": { "extruder_nr": { "default_value": 0 }, - "machine_nozzle_size": { "default_value": 1.5 }, + "machine_nozzle_size": { "default_value": 1.6 }, "material_diameter": { "default_value": 1.75 } } } \ No newline at end of file