From 35ccd63e29756332233331246305242cd410d2d2 Mon Sep 17 00:00:00 2001 From: Alan Bjorklund Date: Thu, 26 Sep 2024 15:35:56 -0400 Subject: [PATCH] Method printers: Adding new materials (Tough PLA, PETG, NylonCF, ABS) and updated profiles for 5.9 PP-511 --- .../definitions/ultimaker_method.def.json | 24 +- .../ultimaker_method_base.def.json | 237 +++++++++++++----- .../definitions/ultimaker_methodx.def.json | 20 +- .../definitions/ultimaker_methodxl.def.json | 54 +++- ..._method_1a_um-pla-175_0.2mm_solid.inst.cfg | 8 +- ...d_1a_um-tough-pla-175_0.2mm_solid.inst.cfg | 23 ++ ...od_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg | 22 ++ ..._1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg | 8 +- ..._method_1c_um-pla-175_0.2mm_solid.inst.cfg | 8 +- ...d_1c_um-tough-pla-175_0.2mm_solid.inst.cfg | 23 ++ ..._labs_um-nylon-cf-175_0.2mm_solid.inst.cfg | 22 ++ ...abs_um-nylon12-cf-175_0.2mm_solid.inst.cfg | 8 +- ...ethod_labs_um-pla-175_0.2mm_solid.inst.cfg | 8 +- ...labs_um-tough-pla-175_0.2mm_solid.inst.cfg | 23 ++ ...methodx_1a_um-pla-175_0.2mm_solid.inst.cfg | 8 +- ...x_1a_um-tough-pla-175_0.2mm_solid.inst.cfg | 23 ++ ...methodx_1c_um-abs-175_0.2mm_solid.inst.cfg | 23 ++ ...thodx_1c_um-abscf-175_0.2mm_solid.inst.cfg | 8 +- ...ethodx_1c_um-absr-175_0.2mm_solid.inst.cfg | 8 +- ...methodx_1c_um-asa-175_0.2mm_solid.inst.cfg | 8 +- ...dx_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg | 22 ++ ..._1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg | 8 +- ...methodx_1c_um-pla-175_0.2mm_solid.inst.cfg | 8 +- ...x_1c_um-tough-pla-175_0.2mm_solid.inst.cfg | 23 ++ ...ethodx_1xa_um-abs-175_0.2mm_solid.inst.cfg | 23 ++ ...thodx_1xa_um-absr-175_0.2mm_solid.inst.cfg | 8 +- ...ethodx_1xa_um-asa-175_0.2mm_solid.inst.cfg | 8 +- ...thodx_labs_um-abs-175_0.2mm_solid.inst.cfg | 23 ++ ...odx_labs_um-abscf-175_0.2mm_solid.inst.cfg | 8 +- ...hodx_labs_um-absr-175_0.2mm_solid.inst.cfg | 8 +- ...thodx_labs_um-asa-175_0.2mm_solid.inst.cfg | 8 +- ..._labs_um-nylon-cf-175_0.2mm_solid.inst.cfg | 22 ++ ...abs_um-nylon12-cf-175_0.2mm_solid.inst.cfg | 8 +- ...thodx_labs_um-pla-175_0.2mm_solid.inst.cfg | 8 +- ...labs_um-tough-pla-175_0.2mm_solid.inst.cfg | 23 ++ ...ethodxl_1a_um-pla-175_0.2mm_solid.inst.cfg | 8 +- ...l_1a_um-tough-pla-175_0.2mm_solid.inst.cfg | 24 ++ ...ethodxl_1c_um-abs-175_0.2mm_solid.inst.cfg | 22 ++ ...hodxl_1c_um-abscf-175_0.2mm_solid.inst.cfg | 8 +- ...thodxl_1c_um-absr-175_0.2mm_solid.inst.cfg | 8 +- ...ethodxl_1c_um-asa-175_0.2mm_solid.inst.cfg | 8 +- ...xl_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg | 22 ++ ..._1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg | 8 +- ...ethodxl_1c_um-pla-175_0.2mm_solid.inst.cfg | 8 +- ...l_1c_um-tough-pla-175_0.2mm_solid.inst.cfg | 24 ++ ...thodxl_1xa_um-abs-175_0.2mm_solid.inst.cfg | 22 ++ ...hodxl_1xa_um-absr-175_0.2mm_solid.inst.cfg | 8 +- ...thodxl_1xa_um-asa-175_0.2mm_solid.inst.cfg | 8 +- ...hodxl_labs_um-abs-175_0.2mm_solid.inst.cfg | 22 ++ ...dxl_labs_um-abscf-175_0.2mm_solid.inst.cfg | 8 +- ...odxl_labs_um-absr-175_0.2mm_solid.inst.cfg | 8 +- ...hodxl_labs_um-asa-175_0.2mm_solid.inst.cfg | 8 +- ..._labs_um-nylon-cf-175_0.2mm_solid.inst.cfg | 22 ++ ...abs_um-nylon12-cf-175_0.2mm_solid.inst.cfg | 8 +- ...hodxl_labs_um-pla-175_0.2mm_solid.inst.cfg | 8 +- ...labs_um-tough-pla-175_0.2mm_solid.inst.cfg | 24 ++ .../um_method_1a_um-petg-175_0.2mm.inst.cfg | 69 +++++ .../um_method_1a_um-pla-175_0.2mm.inst.cfg | 3 - ..._method_1a_um-tough-pla-175_0.2mm.inst.cfg | 84 +++++++ ...m_method_1c_um-nylon-cf-175_0.2mm.inst.cfg | 60 +++++ ...method_1c_um-nylon12-cf-175_0.2mm.inst.cfg | 10 +- .../um_method_1c_um-petg-175_0.2mm.inst.cfg | 69 +++++ .../um_method_1c_um-pla-175_0.2mm.inst.cfg | 3 - ..._method_1c_um-tough-pla-175_0.2mm.inst.cfg | 84 +++++++ .../um_method_2a_um-pva-175_0.2mm.inst.cfg | 13 +- .../um_method_global_Fast_Quality.inst.cfg | 15 ++ ...method_labs_um-nylon-cf-175_0.2mm.inst.cfg | 60 +++++ ...thod_labs_um-nylon12-cf-175_0.2mm.inst.cfg | 10 +- .../um_method_labs_um-petg-175_0.2mm.inst.cfg | 69 +++++ .../um_method_labs_um-pla-175_0.2mm.inst.cfg | 3 - ...ethod_labs_um-tough-pla-175_0.2mm.inst.cfg | 84 +++++++ .../um_methodx_1a_um-petg-175_0.2mm.inst.cfg | 69 +++++ .../um_methodx_1a_um-pla-175_0.2mm.inst.cfg | 3 - ...methodx_1a_um-tough-pla-175_0.2mm.inst.cfg | 84 +++++++ .../um_methodx_1c_um-abs-175_0.2mm.inst.cfg | 63 +++++ .../um_methodx_1c_um-abscf-175_0.2mm.inst.cfg | 13 +- .../um_methodx_1c_um-absr-175_0.2mm.inst.cfg | 21 +- .../um_methodx_1c_um-asa-175_0.2mm.inst.cfg | 13 +- ..._methodx_1c_um-nylon-cf-175_0.2mm.inst.cfg | 60 +++++ ...ethodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg | 10 +- .../um_methodx_1c_um-petg-175_0.2mm.inst.cfg | 69 +++++ .../um_methodx_1c_um-pla-175_0.2mm.inst.cfg | 3 - ...methodx_1c_um-tough-pla-175_0.2mm.inst.cfg | 84 +++++++ .../um_methodx_1xa_um-abs-175_0.2mm.inst.cfg | 63 +++++ .../um_methodx_1xa_um-absr-175_0.2mm.inst.cfg | 21 +- .../um_methodx_1xa_um-asa-175_0.2mm.inst.cfg | 13 +- .../um_methodx_2a_um-pva-175_0.2mm.inst.cfg | 13 +- ...thodx_2xa_um-rapidrinse-175_0.2mm.inst.cfg | 6 +- .../um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg | 26 +- .../um_methodx_global_Fast_Quality.inst.cfg | 15 ++ .../um_methodx_labs_um-abs-175_0.2mm.inst.cfg | 63 +++++ ...m_methodx_labs_um-abscf-175_0.2mm.inst.cfg | 13 +- ...um_methodx_labs_um-absr-175_0.2mm.inst.cfg | 21 +- .../um_methodx_labs_um-asa-175_0.2mm.inst.cfg | 13 +- ...ethodx_labs_um-nylon-cf-175_0.2mm.inst.cfg | 60 +++++ ...hodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg | 10 +- ...um_methodx_labs_um-petg-175_0.2mm.inst.cfg | 69 +++++ .../um_methodx_labs_um-pla-175_0.2mm.inst.cfg | 3 - ...thodx_labs_um-tough-pla-175_0.2mm.inst.cfg | 84 +++++++ .../um_methodxl_1a_um-petg-175_0.2mm.inst.cfg | 67 +++++ .../um_methodxl_1a_um-pla-175_0.2mm.inst.cfg | 3 - ...ethodxl_1a_um-tough-pla-175_0.2mm.inst.cfg | 82 ++++++ .../um_methodxl_1c_um-abs-175_0.2mm.inst.cfg | 63 +++++ ...um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg | 13 +- .../um_methodxl_1c_um-absr-175_0.2mm.inst.cfg | 21 +- .../um_methodxl_1c_um-asa-175_0.2mm.inst.cfg | 13 +- ...methodxl_1c_um-nylon-cf-175_0.2mm.inst.cfg | 60 +++++ ...thodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg | 10 +- .../um_methodxl_1c_um-petg-175_0.2mm.inst.cfg | 67 +++++ .../um_methodxl_1c_um-pla-175_0.2mm.inst.cfg | 3 - ...ethodxl_1c_um-tough-pla-175_0.2mm.inst.cfg | 82 ++++++ .../um_methodxl_1xa_um-abs-175_0.2mm.inst.cfg | 63 +++++ ...um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg | 21 +- .../um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg | 13 +- .../um_methodxl_2a_um-pva-175_0.2mm.inst.cfg | 13 +- ...hodxl_2xa_um-rapidrinse-175_0.2mm.inst.cfg | 6 +- ...um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg | 26 +- .../um_methodxl_global_Fast_Quality.inst.cfg | 15 ++ ...um_methodxl_labs_um-abs-175_0.2mm.inst.cfg | 63 +++++ ..._methodxl_labs_um-abscf-175_0.2mm.inst.cfg | 13 +- ...m_methodxl_labs_um-absr-175_0.2mm.inst.cfg | 21 +- ...um_methodxl_labs_um-asa-175_0.2mm.inst.cfg | 13 +- ...thodxl_labs_um-nylon-cf-175_0.2mm.inst.cfg | 60 +++++ ...odxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg | 10 +- ...m_methodxl_labs_um-petg-175_0.2mm.inst.cfg | 67 +++++ ...um_methodxl_labs_um-pla-175_0.2mm.inst.cfg | 3 - ...hodxl_labs_um-tough-pla-175_0.2mm.inst.cfg | 82 ++++++ 127 files changed, 3286 insertions(+), 368 deletions(-) create mode 100644 resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg create mode 100644 resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_solid.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_1a_um-petg-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_1c_um-nylon-cf-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_1c_um-petg-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_global_Fast_Quality.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_labs_um-nylon-cf-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_labs_um-petg-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_1a_um-petg-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-cf-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_1c_um-petg-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_global_Fast_Quality.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-cf-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_labs_um-petg-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_1a_um-petg-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon-cf-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_1c_um-petg-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_global_Fast_Quality.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon-cf-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_labs_um-petg-175_0.2mm.inst.cfg create mode 100644 resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg diff --git a/resources/definitions/ultimaker_method.def.json b/resources/definitions/ultimaker_method.def.json index 93a6b23f7b8..2f4e372e288 100644 --- a/resources/definitions/ultimaker_method.def.json +++ b/resources/definitions/ultimaker_method.def.json @@ -23,19 +23,7 @@ "fabtotum_", "fdplast_", "filo3d_", - "generic_asa_175", - "generic_abs_175", - "generic_bvoh_175", - "generic_petg_175", - "generic_pla_175", - "generic_tough_pla_175", - "generic_pva_175", - "generic_cffpa_175", - "generic_cpe_175", - "generic_nylon_175", - "generic_hips_175", - "generic_pc_175", - "generic_tpu_175", + "generic_", "goofoo_", "ideagen3D_", "imade3d_", @@ -53,23 +41,22 @@ "ultimaker_absr_175", "ultimaker_abscf_175", "ultimaker_bvoh_175", - "ultimaker_petg_175", "ultimaker_cffpa_175", "ultimaker_cpe_175", - "ultimaker_nylon_175", "ultimaker_hips_175", "ultimaker_pc_175", "ultimaker_tpu_175", - "ultimaker_tough_pla_175", "ultimaker_rapidrinse_175", "ultimaker_sr30", + "ultimaker_metallic_pla_175", "verbatim_", "Vertex_", "volumic_", "xyzprinting_", "zyyx_pro_", "octofiber_", - "fiberlogy_" + "fiberlogy_", + "ultimaker_metallic_pla_175" ], "has_machine_materials": true, "has_machine_quality": true, @@ -98,7 +85,6 @@ "overrides": { "build_volume_temperature": { "maximum_value": "67" }, - "machine_depth": { "default_value": 236.48 }, "machine_disallowed_areas": { "default_value": [ @@ -128,9 +114,7 @@ ] ] }, - "machine_height": { "default_value": 196 }, "machine_name": { "default_value": "UltiMaker Method" }, - "machine_width": { "default_value": 283.3 }, "prime_tower_position_x": { "value": "(150 / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (150 - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (150 / 2 if resolveOrValue('machine_center_is_zero') else 0)" }, "prime_tower_position_y": { "value": "190 - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (190 / 2 if resolveOrValue('machine_center_is_zero') else 0)" } } diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json index 23e61410d90..7a91506b5b4 100644 --- a/resources/definitions/ultimaker_method_base.def.json +++ b/resources/definitions/ultimaker_method_base.def.json @@ -9,42 +9,7 @@ "manufacturer": "Ultimaker B.V.", "file_formats": "application/x-makerbot", "platform": "ultimaker_method_platform.stl", - "exclude_materials": [ - "dsm_", - "Essentium_", - "imade3d_", - "chromatik_", - "3D-Fuel_", - "bestfilament_", - "emotiontech_", - "eryone_", - "eSUN_", - "Extrudr_", - "fabtotum_", - "fdplast_", - "filo3d_", - "generic_", - "ultimaker_rapidrinse_175", - "goofoo_", - "ideagen3D_", - "imade3d_", - "innofill_", - "layer_one_", - "leapfrog_", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "redd_", - "tizyx_", - "verbatim_", - "Vertex_", - "volumic_", - "xyzprinting_", - "zyyx_pro_", - "octofiber_", - "fiberlogy_" - ], + "exclude_materials": [], "has_machine_materials": true, "has_machine_quality": true, "has_materials": true, @@ -170,8 +135,13 @@ "enabled": false, "value": "acceleration_print" }, - "adhesion_extruder_nr": { "value": 0 }, + "adhesion_extruder_nr": + { + "enabled": false, + "value": "min(extruderValues('extruder_nr'))" + }, "adhesion_type": { "value": "'raft'" }, + "bottom_thickness": { "value": "top_bottom_thickness" }, "bridge_enable_more_layers": { "value": true }, "bridge_fan_speed": { "value": "cool_fan_speed_max" }, "bridge_fan_speed_2": { "value": "(cool_fan_speed_max + cool_fan_speed_min) / 2" }, @@ -195,14 +165,38 @@ { "force_depends_on_settings": [ "support_extruder_nr" ] }, + "cool_fan_full_at_height": { "value": "1 if resolveOrValue('adhesion_type') == 'raft' else layer_height + layer_height_0" }, + "cool_fan_full_layer": { "value": "1 if resolveOrValue('adhesion_type') == 'raft' else 3" }, "default_material_bed_temperature": { "resolve": "min(extruderValues('default_material_bed_temperature'))" }, "extruder_prime_pos_abs": { "default_value": true }, "gradual_support_infill_steps": { "value": 0 }, + "group_outer_walls": { "value": false }, + "infill_angles": + { + "value": [ + 45, + 45, + 45, + 45, + 45, + 135, + 135, + 135, + 135, + 135 + ] + }, "infill_before_walls": { "value": false }, "infill_material_flow": { "value": "material_flow" }, "infill_overlap": { "value": 0 }, - "infill_pattern": { "value": "'grid' if infill_sparse_density < 80 else 'lines'" }, + "infill_pattern": { "value": "'zigzag'" }, "infill_wipe_dist": { "value": 0 }, + "initial_layer_line_width_factor": + { + "maximum_value": 350, + "maximum_value_warning": 320, + "value": "100 if resolveOrValue('adhesion_type') == 'raft' else 200" + }, "inset_direction": { "value": "'inside_out'" }, "jerk_enabled": { @@ -309,22 +303,66 @@ "enabled": false, "value": "jerk_print" }, + "layer_height_0": { "value": "layer_height if resolveOrValue('adhesion_type') == 'raft' else layer_height * 1.25" }, "machine_acceleration": { "default_value": 3000 }, "machine_center_is_zero": { "value": true }, + "machine_depth": { "default_value": 236.48 }, + "machine_disallowed_areas": + { + "default_value": [ + [ + [-141.65, -118.11], + [141.65, -118.11], + [141.65, -95.205], + [-141.65, -95.205] + ], + [ + [-141.65, 118.37], + [141.65, 118.37], + [141.65, 95.205], + [-141.65, 95.205] + ], + [ + [-141.65, -118.11], + [-76.149, -118.11], + [-76.149, 118.37], + [-141.65, 118.37] + ], + [ + [76.149, -118.11], + [141.65, -118.11], + [141.65, 118.37], + [76.149, 118.37] + ] + ], + "value": "[ [ [-141.65, -118.11], [141.65, -118.11], [141.65, -95.205], [-141.65, -95.205] ], [ [-141.65, 118.37], [141.65, 118.37], [141.65, 95.205], [-141.65, 95.205] ], [ [-141.65, -118.11], [-114.249, -118.11], [-114.249, 118.37], [-141.65, 118.37] ], [ [76.149, -118.11], [141.65, -118.11], [141.65, 118.37], [76.149, 118.37] ] ] if max(extruderValues('extruder_nr')) == 0 else [ [ [-141.65, -118.11], [141.65, -118.11], [141.65, -95.205], [-141.65, -95.205] ], [ [-141.65, 118.37], [141.65, 118.37], [141.65, 95.205], [-141.65, 95.205] ], [ [-141.65, -118.11], [-76.149, -118.11], [-76.149, 118.37], [-141.65, 118.37] ], [ [76.149, -118.11], [141.65, -118.11], [141.65, 118.37], [76.149, 118.37] ] ]" + }, "machine_end_gcode": { "default_value": "" }, "machine_extruder_count": { "default_value": 2 }, "machine_gcode_flavor": { "default_value": "Griffin" }, "machine_heated_bed": { "default_value": false }, "machine_heated_build_volume": { "default_value": true }, + "machine_height": { "default_value": 196.749 }, "machine_min_cool_heat_time_window": { "value": 15 }, "machine_name": { "default_value": "UltiMaker Method" }, "machine_nozzle_cool_down_speed": { "value": 0.8 }, "machine_nozzle_heat_up_speed": { "value": 3.5 }, "machine_scale_fan_speed_zero_to_one": { "value": true }, "machine_start_gcode": { "default_value": "G0 Z20" }, + "machine_width": { "default_value": 283.3 }, "material_bed_temperature": { "enabled": "machine_heated_bed" }, + "material_final_print_temperature": + { + "maximum_value": "material_print_temperature", + "minimum_value": "material_standby_temperature" + }, "material_flow": { "value": 100 }, - "material_initial_print_temperature": { "value": "material_print_temperature-10" }, + "material_initial_print_temperature": + { + "maximum_value": "material_print_temperature", + "minimum_value": "material_standby_temperature", + "value": "material_print_temperature-5" + }, "material_print_temperature": { "force_depends_on_settings": [ "support_extruder_nr" ] @@ -339,17 +377,35 @@ "prime_tower_base_curve_magnitude": { "value": 2 }, "prime_tower_base_height": { "value": 6 }, "prime_tower_base_size": { "value": 10 }, - "prime_tower_enable": { "value": false }, + "prime_tower_enable": { "value": "extruders_enabled_count > 1" }, "prime_tower_flow": { "value": "material_flow" }, - "prime_tower_line_width": { "value": 1 }, + "prime_tower_line_width": + { + "maximum_value": 2, + "maximum_value_warning": 1.5, + "value": 1 + }, + "prime_tower_mode": + { + "resolve": "'normal'", + "value": "'normal'" + }, "prime_tower_raft_base_line_spacing": { "value": "raft_base_line_width" }, "prime_tower_wipe_enabled": { "value": true }, "print_sequence": { "enabled": false }, + "raft_acceleration": { "enabled": false }, "raft_airgap": { "force_depends_on_settings": [ "support_extruder_nr" ] }, + "raft_base_acceleration": { "enabled": false }, + "raft_base_extruder_nr": + { + "enabled": false, + "value": "min(extruderValues('extruder_nr'))" + }, "raft_base_fan_speed": { "value": 0 }, + "raft_base_jerk": { "enabled": false }, "raft_base_line_spacing": { "force_depends_on_settings": [ "raft_interface_extruder_nr" ], @@ -358,9 +414,11 @@ "raft_base_line_width": { "force_depends_on_settings": [ "raft_interface_extruder_nr" ], + "maximum_value": 2.5, + "maximum_value_warning": 1.8, "value": 1.4 }, - "raft_base_speed": { "value": 10 }, + "raft_base_speed": { "value": "raft_speed" }, "raft_base_thickness": { "force_depends_on_settings": [ @@ -369,24 +427,24 @@ ], "value": 0.8 }, - "raft_base_wall_count": - { - "force_depends_on_settings": [ "support_extruder_nr" ], - "value": "raft_wall_count" - }, - "raft_interface_extruder_nr": { "value": "raft_surface_extruder_nr" }, + "raft_base_wall_count": { "value": "raft_wall_count" }, + "raft_interface_acceleration": { "enabled": false }, + "raft_interface_extruder_nr": { "value": "max(extruderValues('extruder_nr'))" }, "raft_interface_fan_speed": { "value": 0 }, "raft_interface_infill_overlap": { "force_depends_on_settings": [ "raft_interface_extruder_nr" ] }, + "raft_interface_infill_overlap_mm": { "maximum_value_warning": "2 * machine_nozzle_size" }, + "raft_interface_jerk": { "enabled": false }, "raft_interface_layers": { "value": 2 }, "raft_interface_line_spacing": { "force_depends_on_settings": [ "raft_base_thickness", "raft_interface_extruder_nr" - ] + ], + "minimum_value_warning": "raft_interface_line_width * 0.8" }, "raft_interface_line_width": { @@ -396,7 +454,11 @@ ], "value": 0.7 }, - "raft_interface_speed": { "value": 90 }, + "raft_interface_speed": + { + "force_depends_on_settings": [ "support_extruder_nr" ], + "value": "raft_speed * 5" + }, "raft_interface_thickness": { "value": 0.3 }, "raft_interface_wall_count": { "value": "raft_wall_count" }, "raft_interface_z_offset": @@ -406,14 +468,18 @@ "raft_interface_extruder_nr" ] }, + "raft_jerk": { "enabled": false }, "raft_margin": { "value": 1.2 }, "raft_smoothing": { "value": 9.5 }, - "raft_surface_extruder_nr": { "value": "int(anyExtruderWithMaterial('material_is_support_material')) if support_enable and extruderValue(support_extruder_nr,'material_is_support_material') else raft_base_extruder_nr" }, + "raft_speed": { "value": 10 }, + "raft_surface_acceleration": { "enabled": false }, + "raft_surface_extruder_nr": { "value": "max(extruderValues('extruder_nr'))" }, "raft_surface_fan_speed": { "value": 0 }, "raft_surface_flow": { "force_depends_on_settings": [ "support_extruder_nr" ] }, + "raft_surface_jerk": { "enabled": false }, "raft_surface_speed": { "force_depends_on_settings": [ "support_extruder_nr" ] @@ -430,25 +496,52 @@ "raft_wall_count": { "value": 2 }, "retract_at_layer_change": { "value": true }, "retraction_amount": { "value": 0.75 }, - "retraction_combing": { "value": "'off'" }, + "retraction_combing": + { + "enabled": false, + "value": "'off'" + }, "retraction_combing_max_distance": { "value": "speed_travel / 10" }, "retraction_count_max": { "value": 100 }, "retraction_extrusion_window": { "value": 0 }, "retraction_hop": { "value": 0.4 }, "retraction_hop_enabled": { "value": true }, "retraction_hop_only_when_collides": { "value": false }, - "retraction_min_travel": { "value": "0.6" }, + "retraction_min_travel": + { + "minimum_value_warning": "line_width * 1.25", + "value": 0.6 + }, "retraction_prime_speed": { "value": "retraction_speed" }, "retraction_speed": { "value": 5 }, - "roofing_layer_count": { "value": 2 }, + "roofing_angles": + { + "value": [45, 135] + }, + "roofing_layer_count": + { + "maximum_value_warning": 10, + "minimum_value": 0, + "minimum_value_warning": 1, + "value": 2 + }, "roofing_material_flow": { "value": "material_flow" }, "roofing_monotonic": { "value": true }, + "skin_angles": + { + "value": [0, 90] + }, "skin_material_flow": { "value": "material_flow" }, "skin_material_flow_layer_0": { "value": "material_flow" }, "skin_monotonic": { "value": true }, "skin_outline_count": { "value": 0 }, "skin_overlap": { "value": 0 }, "skin_preshrink": { "value": 0 }, + "skirt_brim_extruder_nr": + { + "enabled": false, + "value": "min(extruderValues('extruder_nr'))" + }, "skirt_brim_material_flow": { "value": "material_flow" }, "skirt_brim_minimal_length": { "value": 500 }, "small_skin_width": { "value": 4 }, @@ -465,34 +558,58 @@ "speed_wall_x": { "value": "speed_wall" }, "support_angle": { "value": 40 }, "support_bottom_height": { "value": "2*support_infill_sparse_thickness" }, + "support_bottom_line_width": + { + "maximum_value": 3, + "maximum_value_warning": 1.8 + }, "support_bottom_material_flow": { "value": "material_flow" }, - "support_bottom_wall_count": { "value": "0" }, + "support_bottom_wall_count": + { + "maximum_value": 8, + "maximum_value_warning": 6, + "value": 0 + }, "support_brim_enable": { "value": false }, "support_conical_min_width": { "value": 10 }, "support_enable": { "value": true }, "support_extruder_nr": { "value": "int(anyExtruderWithMaterial('material_is_support_material'))" }, "support_fan_enable": { "value": "True" }, + "support_infill_angles": + { + "value": [ + 45 + ] + }, "support_infill_rate": { "value": 20.0 }, "support_infill_sparse_thickness": { "value": "layer_height" }, "support_interface_enable": { "value": true }, "support_interface_height": { "value": "4*support_infill_sparse_thickness" }, "support_interface_material_flow": { "value": "material_flow" }, "support_interface_offset": { "value": "1" }, - "support_interface_pattern": { "value": "'lines'" }, + "support_interface_pattern": { "value": "'zigzag' if support_wall_count > 1 else 'lines'" }, "support_interface_wall_count": { "value": "1" }, + "support_join_distance": { "value": "4.5 if support_wall_count > 1 else 2" }, "support_material_flow": { "value": "material_flow" }, - "support_offset": { "value": "1.8" }, - "support_pattern": { "value": "'lines'" }, + "support_offset": { "value": "2.4 if support_wall_count > 1 else 1.8" }, + "support_pattern": { "value": "'zigzag' if support_wall_count > 1 else 'lines'" }, "support_roof_height": { "value": "4*layer_height" }, "support_roof_material_flow": { "value": "material_flow" }, "support_supported_skin_fan_speed": { "value": "cool_fan_speed_max" }, - "support_use_towers": { "value": "False" }, + "support_use_towers": { "value": false }, "support_wall_count": { "value": "2 if support_conical_enabled or support_structure == 'tree' else 0" }, "support_xy_distance": { "value": 0.2 }, "support_xy_distance_overhang": { "value": "support_xy_distance" }, "switch_extruder_retraction_amount": { "value": 0.5 }, "switch_extruder_retraction_speeds": { "value": "retraction_speed" }, - "top_bottom_thickness": { "value": "5*layer_height" }, + "top_bottom_pattern": { "value": "'zigzag'" }, + "top_bottom_pattern_0": { "value": "'zigzag'" }, + "top_bottom_thickness": + { + "minimum_value_warning": 0.3, + "value": "4*layer_height" + }, + "top_thickness": { "value": "top_bottom_thickness * 1.5" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "travel_avoid_other_parts": { "value": false }, "wall_0_inset": { "value": 0 }, diff --git a/resources/definitions/ultimaker_methodx.def.json b/resources/definitions/ultimaker_methodx.def.json index 07efe3ef809..a5298473eda 100644 --- a/resources/definitions/ultimaker_methodx.def.json +++ b/resources/definitions/ultimaker_methodx.def.json @@ -23,7 +23,18 @@ "fabtotum_", "fdplast_", "filo3d_", - "generic_", + "generic_asa_175", + "generic_abs_175", + "generic_bvoh_175", + "generic_petg_175", + "generic_pla_175", + "generic_tough_pla_175", + "generic_pva_175", + "generic_cffpa_175", + "generic_cpe_175", + "generic_nylon_175", + "generic_hips_175", + "generic_tpu_175", "goofoo_", "ideagen3D_", "imade3d_", @@ -36,14 +47,14 @@ "polywood_pla", "redd_", "tizyx_", - "ultimaker_tough_pla_175", "verbatim_", "Vertex_", "volumic_", "xyzprinting_", "zyyx_pro_", "octofiber_", - "fiberlogy_" + "fiberlogy_", + "ultimaker_metallic_pla_175" ], "has_machine_materials": true, "has_machine_quality": true, @@ -72,7 +83,6 @@ "overrides": { "build_volume_temperature": { "maximum_value": "107" }, - "machine_depth": { "default_value": 236.48 }, "machine_disallowed_areas": { "default_value": [ @@ -102,9 +112,7 @@ ] ] }, - "machine_height": { "default_value": 196 }, "machine_name": { "default_value": "UltiMaker Method X" }, - "machine_width": { "default_value": 283.3 }, "prime_tower_position_x": { "value": "(150 / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (150 - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (150 / 2 if resolveOrValue('machine_center_is_zero') else 0)" }, "prime_tower_position_y": { "value": "190 - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (190 / 2 if resolveOrValue('machine_center_is_zero') else 0)" } } diff --git a/resources/definitions/ultimaker_methodxl.def.json b/resources/definitions/ultimaker_methodxl.def.json index 993a99a36cc..f5c9ba99583 100644 --- a/resources/definitions/ultimaker_methodxl.def.json +++ b/resources/definitions/ultimaker_methodxl.def.json @@ -9,6 +9,42 @@ "manufacturer": "Ultimaker B.V.", "file_formats": "application/x-makerbot", "platform": "ultimaker_method_xl_platform.stl", + "exclude_materials": [ + "dsm_", + "Essentium_", + "imade3d_", + "chromatik_", + "3D-Fuel_", + "bestfilament_", + "emotiontech_", + "eryone_", + "eSUN_", + "Extrudr_", + "fabtotum_", + "fdplast_", + "filo3d_", + "generic_", + "goofoo_", + "ideagen3D_", + "imade3d_", + "innofill_", + "layer_one_", + "leapfrog_", + "polyflex_pla", + "polymax_pla", + "polyplus_pla", + "polywood_pla", + "redd_", + "tizyx_", + "verbatim_", + "Vertex_", + "volumic_", + "xyzprinting_", + "zyyx_pro_", + "octofiber_", + "fiberlogy_", + "ultimaker_metallic_pla_175" + ], "has_machine_materials": true, "has_machine_quality": true, "has_materials": true, @@ -56,14 +92,26 @@ [205, 160], [154.5, 160] ] - ] + ], + "value": "[ [ [-204, -160], [204, -160], [204, -154.5], [-204, -154.5] ], [ [-204, 160], [204, 160], [204, 154.5], [-204, 154.5] ], [ [-205, -160], [-191.5, -160], [-191.5, 160], [-205, 160] ], [ [154.5, -160], [205, -160], [205, 160], [154.5, 160] ] ] if max(extruderValues('extruder_nr')) == 0 else [ [ [-204, -160], [204, -160], [204, -154.5], [-204, -154.5] ], [ [-204, 160], [204, 160], [204, 154.5], [-204, 154.5] ], [ [-205, -160], [-154.5, -160], [-154.5, 160], [-205, 160] ], [ [154.5, -160], [205, -160], [205, 160], [154.5, 160] ] ]" }, "machine_heated_bed": { "default_value": true }, - "machine_height": { "default_value": 320 }, + "machine_height": { "default_value": 319.9 }, "machine_name": { "default_value": "UltiMaker Method XL" }, "machine_width": { "default_value": 410 }, "prime_tower_position_x": { "value": "(305 - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (305 / 2)" }, "prime_tower_position_y": { "value": "305 - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (305 / 2)" }, - "speed_travel": { "value": 500 } + "speed_travel": + { + "maximum_value": 500, + "maximum_value_warning": 450, + "value": 400 + }, + "speed_travel_layer_0": + { + "maximum_value": 500, + "maximum_value_warning": 450, + "value": 250 + } } } \ No newline at end of file diff --git a/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_solid.inst.cfg index fdfbe77c338..927399a8365 100644 --- a/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_solid.inst.cfg @@ -12,6 +12,12 @@ type = intent variant = 1A [values] +bottom_thickness = =top_bottom_thickness build_volume_temperature = 47 -infill_sparse_density = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..410e483e60f --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_solid.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_method +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1A + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 47 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..71c6d9d329f --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_method +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg index 231cf74ea37..2477908a4f1 100644 --- a/resources/intent/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1C [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_solid.inst.cfg index 87cc96fb5aa..a708bfdb10b 100644 --- a/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_solid.inst.cfg @@ -12,6 +12,12 @@ type = intent variant = 1C [values] +bottom_thickness = =top_bottom_thickness build_volume_temperature = 47 -infill_sparse_density = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..b361ff9c782 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_solid.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_method +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 47 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..5ab5c06f0c9 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_method +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg index 4a05977a4e2..09fdabc2493 100644 --- a/resources/intent/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = LABS [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_solid.inst.cfg index 6c9d832805c..d2414acb3c7 100644 --- a/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_solid.inst.cfg @@ -12,6 +12,12 @@ type = intent variant = LABS [values] +bottom_thickness = =top_bottom_thickness build_volume_temperature = 47 -infill_sparse_density = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..31a93539624 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_solid.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_method +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 47 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_solid.inst.cfg index 2087c38cbae..2dd9cc562bb 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_solid.inst.cfg @@ -12,6 +12,12 @@ type = intent variant = 1A [values] +bottom_thickness = =top_bottom_thickness build_volume_temperature = 47 -infill_sparse_density = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..72573610e5d --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_solid.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1A + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 47 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..5fbebd5d373 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm_solid.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm_solid.inst.cfg index 697aa8842e9..c9ff26a4a0a 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1C [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_solid.inst.cfg index 8826f7e7d4b..60a8f90e705 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1C [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm_solid.inst.cfg index 66464f600e5..f4a43a52389 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1C [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..8b55a887da1 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg index 021e1de2e19..ecf2072190f 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1C [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_solid.inst.cfg index 330811df734..24aea3e0a06 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_solid.inst.cfg @@ -12,6 +12,12 @@ type = intent variant = 1C [values] +bottom_thickness = =top_bottom_thickness build_volume_temperature = 47 -infill_sparse_density = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..8453738f7cc --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_solid.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 47 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..eff1e7a3bb5 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm_solid.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1XA + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_solid.inst.cfg index c426a994992..a421a36dfda 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1XA [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm_solid.inst.cfg index c9f50242588..dd12e9b01c5 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1XA [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..34a0fdae0f7 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm_solid.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm_solid.inst.cfg index 3d8106d85e1..bf20b9bdbe5 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = LABS [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_solid.inst.cfg index ec07c4b98a3..5b1181e8306 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = LABS [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm_solid.inst.cfg index 6dbbce3d786..3917512f395 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = LABS [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..a367fe6d329 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg index 224e85f1afb..1a283b953b6 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = LABS [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_solid.inst.cfg index 2a672307bb0..71dbd92252b 100644 --- a/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_solid.inst.cfg @@ -12,6 +12,12 @@ type = intent variant = LABS [values] +bottom_thickness = =top_bottom_thickness build_volume_temperature = 47 -infill_sparse_density = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..74ee19dd10b --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_solid.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_methodx +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 47 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_solid.inst.cfg index 52b091486e4..ab423e9cfa8 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_solid.inst.cfg @@ -12,7 +12,13 @@ type = intent variant = 1A [values] +bottom_thickness = =top_bottom_thickness build_volume_temperature = 45 -infill_sparse_density = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag material_bed_temperature = 45 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..415b889cdb9 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_solid.inst.cfg @@ -0,0 +1,24 @@ +[general] +definition = ultimaker_methodxl +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1A + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 45 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +material_bed_temperature = 45 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..605f8cbb223 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodxl +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm_solid.inst.cfg index 5714a796b3e..45de0cd183e 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1C [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_solid.inst.cfg index 603a19fa4f2..628d4fe825a 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1C [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm_solid.inst.cfg index 6e5f8557c50..448734f1047 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1C [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..158e4a303bf --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon-cf-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodxl +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg index 0440ceb055b..955d83ad4ea 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1C [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_solid.inst.cfg index ce45abad854..f451b6600a4 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_solid.inst.cfg @@ -12,7 +12,13 @@ type = intent variant = 1C [values] +bottom_thickness = =top_bottom_thickness build_volume_temperature = 45 -infill_sparse_density = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag material_bed_temperature = 45 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..eade52916a7 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_solid.inst.cfg @@ -0,0 +1,24 @@ +[general] +definition = ultimaker_methodxl +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1C + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 45 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +material_bed_temperature = 45 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..8cd819b25a3 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodxl +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = intent +variant = 1XA + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_solid.inst.cfg index 470f5547c1c..170a209ff40 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1XA [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm_solid.inst.cfg index 4d8abac2312..afd24eddf06 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = 1XA [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..2a34c6cb9d1 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodxl +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm_solid.inst.cfg index 21e54ab083f..5872a8ebbfc 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = LABS [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_solid.inst.cfg index f1058ebdebd..a50f90c2610 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = LABS [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm_solid.inst.cfg index 984fa20ae1b..9e8c6198af7 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = LABS [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..c6757b9150b --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon-cf-175_0.2mm_solid.inst.cfg @@ -0,0 +1,22 @@ +[general] +definition = ultimaker_methodxl +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg index 4fa2252da37..1dfd005673f 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg @@ -12,5 +12,11 @@ type = intent variant = LABS [values] -infill_sparse_density = 100 +bottom_thickness = =top_bottom_thickness +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_solid.inst.cfg index d5ea2ac7f01..28e7a2b8e33 100644 --- a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_solid.inst.cfg +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_solid.inst.cfg @@ -12,7 +12,13 @@ type = intent variant = LABS [values] +bottom_thickness = =top_bottom_thickness build_volume_temperature = 45 -infill_sparse_density = 100 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag material_bed_temperature = 45 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_solid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_solid.inst.cfg new file mode 100644 index 00000000000..105776dd35b --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_solid.inst.cfg @@ -0,0 +1,24 @@ +[general] +definition = ultimaker_methodxl +name = Solid +version = 4 + +[metadata] +intent_category = solid +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = intent +variant = LABS + +[values] +bottom_thickness = =top_bottom_thickness +build_volume_temperature = 45 +infill_angles = [45,135] +infill_material_flow = 97 +infill_sparse_density = 99 +infill_sparse_pattern = zigzag +material_bed_temperature = 45 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/quality/ultimaker_method/um_method_1a_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-petg-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..5ef9cfe781f --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_1a_um-petg-175_0.2mm.inst.cfg @@ -0,0 +1,69 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_petg_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1A +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_speed = 5 +initial_layer_line_width_factor = 150 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.2 +raft_base_infill_overlap = 10 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_infill_overlap = 35 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 40 +raft_interface_thickness = 0.2 +raft_speed = 15 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 40 +raft_surface_wall_count = 2 +skin_overlap = 10 +speed_layer_0 = 15 +speed_print = 60 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 40 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 83 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow +support_offset = 3 +support_roof_density = =support_interface_density +support_roof_line_width = =line_width +support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max +support_top_distance = =support_z_distance +support_xy_distance = 0.3 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.2 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg index 8d66532574a..50b47bbf007 100644 --- a/resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg @@ -12,15 +12,12 @@ variant = 1A weight = -2 [values] -bottom_layers = 4 cool_fan_enabled = True -cool_fan_full_layer = 4 cool_fan_speed = 100 cool_fan_speed_0 = 0 cool_min_layer_time = 10 cool_min_speed = 5 cool_min_temperature = 205 -infill_sparse_density = 15 material_final_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =default_material_print_temperature + 15 diff --git a/resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..205b273edaa --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg @@ -0,0 +1,84 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1A +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_min_layer_time = 10 +cool_min_speed = 5 +cool_min_temperature = 205 +infill_sparse_density = 15 +material_final_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 15 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.22 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 60 +raft_interface_thickness = 0.2 +raft_interface_z_offset = -0.1 +raft_margin = 3 +raft_speed = 15 +raft_surface_flow = 103 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 90 +raft_surface_wall_count = 2 +raft_surface_z_offset = -0.1 +seam_overhang_angle = 35 +skirt_brim_line_width = 1 +skirt_brim_minimal_length = 200 +skirt_gap = 2.0 +skirt_height = 1 +speed_layer_0 = 15 +speed_print = 150 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 65 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =support_z_distance +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 75 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow * 0.9 +support_interface_offset = 0.8 +support_interface_pattern = zigzag +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow * 0.9 +support_offset = 1 +support_pattern = zigzag +support_roof_density = =support_interface_density +support_roof_height = =layer_height * 4 +support_roof_line_width = =line_width +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.32 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.22 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_method/um_method_1c_um-nylon-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-nylon-cf-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..05f9ea75034 --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_1c_um-nylon-cf-175_0.2mm.inst.cfg @@ -0,0 +1,60 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed_max = 65 +cool_min_layer_time = 3.5 +cool_min_speed = 7 +cool_min_temperature = =default_material_print_temperature-5 +initial_layer_line_width_factor = 120 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.18 +raft_base_infill_overlap = 5 +raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1 +raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_speed = =raft_speed * 7 +raft_interface_z_offset = -0.08 +raft_surface_flow = 105 +raft_surface_infill_overlap = 35 +raft_surface_line_spacing = 0.42 +raft_surface_speed = =raft_speed * 7 +raft_surface_thickness = 0.27 +raft_surface_z_offset = -0.08 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = 12.0 +support_line_width = =line_width * 0.75 +support_material_flow = 90 +support_roof_density = 85 +support_xy_distance = 0.3 +support_z_distance = =layer_height + diff --git a/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg index 6037ef01b1a..38384f404c2 100644 --- a/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg @@ -23,12 +23,12 @@ raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 retraction_amount = 0.5 retraction_min_travel = 3.2 small_skin_width = 3.6 -speed_prime_tower = 30.0 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 55 -speed_topbottom = 55 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_method/um_method_1c_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-petg-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..0f5986e4dee --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_1c_um-petg-175_0.2mm.inst.cfg @@ -0,0 +1,69 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_petg_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_speed = 5 +initial_layer_line_width_factor = 150 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.2 +raft_base_infill_overlap = 10 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_infill_overlap = 35 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 40 +raft_interface_thickness = 0.2 +raft_speed = 15 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 40 +raft_surface_wall_count = 2 +skin_overlap = 10 +speed_layer_0 = 15 +speed_print = 60 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 40 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 83 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow +support_offset = 3 +support_roof_density = =support_interface_density +support_roof_line_width = =line_width +support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max +support_top_distance = =support_z_distance +support_xy_distance = 0.3 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.2 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg index 0914456ebcf..e05d1c9123c 100644 --- a/resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg @@ -12,15 +12,12 @@ variant = 1C weight = -2 [values] -bottom_layers = 4 cool_fan_enabled = True -cool_fan_full_layer = 4 cool_fan_speed = 100 cool_fan_speed_0 = 0 cool_min_layer_time = 10 cool_min_speed = 5 cool_min_temperature = 205 -infill_sparse_density = 15 material_final_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =default_material_print_temperature + 15 diff --git a/resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..c411ef0cb56 --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg @@ -0,0 +1,84 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_min_layer_time = 10 +cool_min_speed = 5 +cool_min_temperature = 205 +infill_sparse_density = 15 +material_final_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 15 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.22 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 60 +raft_interface_thickness = 0.2 +raft_interface_z_offset = -0.1 +raft_margin = 3 +raft_speed = 15 +raft_surface_flow = 103 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 90 +raft_surface_wall_count = 2 +raft_surface_z_offset = -0.1 +seam_overhang_angle = 35 +skirt_brim_line_width = 1 +skirt_brim_minimal_length = 200 +skirt_gap = 2.0 +skirt_height = 1 +speed_layer_0 = 15 +speed_print = 150 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 65 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =support_z_distance +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 75 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow * 0.9 +support_interface_offset = 0.8 +support_interface_pattern = zigzag +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow * 0.9 +support_offset = 1 +support_pattern = zigzag +support_roof_density = =support_interface_density +support_roof_height = =layer_height * 4 +support_roof_line_width = =line_width +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.32 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.22 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg index 99457a0867d..f086d91692f 100644 --- a/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg @@ -26,22 +26,22 @@ raft_interface_infill_overlap = 50 raft_interface_layers = 1 raft_interface_line_spacing = =1.08 if raft_base_thickness == 0.5 else 0.9 raft_interface_line_width = =1.2 if raft_base_thickness == 0.5 else 1 -raft_interface_speed = 15 +raft_interface_speed = =speed_print * 3/10 raft_interface_z_offset = =-0.1 if raft_base_thickness == 0.5 else -0.05 raft_surface_flow = 110 raft_surface_infill_overlap = 50 raft_surface_line_spacing = 0.44 -raft_surface_speed = 20 +raft_surface_speed = =speed_print * 2/5 raft_surface_thickness = 0.27 raft_surface_z_offset = -0.075 retraction_min_travel = 5 retraction_speed = 1.75 -speed_layer_0 = 10 -speed_prime_tower = 10 +speed_layer_0 = =speed_print * 1/5 +speed_prime_tower = =speed_print * 1/5 speed_print = 50 speed_roofing = =speed_print speed_support = =speed_print -speed_support_bottom = 10 +speed_support_bottom = =speed_print * 1/5 speed_support_interface = =speed_print speed_topbottom = =speed_print speed_wall_0 = =speed_print @@ -59,11 +59,10 @@ support_infill_rate = 12 support_interface_offset = 0 support_interface_wall_count = 2 support_offset = 1.8 -support_pattern = grid +support_pattern = zigzag support_roof_density = 95 support_roof_height = =layer_height*8 support_roof_line_width = 0.4 -support_use_towers = True switch_extruder_extra_prime_amount = 1 switch_extruder_retraction_amount = 2.5 switch_extruder_retraction_speeds = 3 diff --git a/resources/quality/ultimaker_method/um_method_global_Fast_Quality.inst.cfg b/resources/quality/ultimaker_method/um_method_global_Fast_Quality.inst.cfg new file mode 100644 index 00000000000..5d3abc6ce73 --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_global_Fast_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_method +name = Normal +version = 4 + +[metadata] +global_quality = True +quality_type = fast +setting_version = 23 +type = quality +weight = -2 + +[values] +layer_height = 0.1524 + diff --git a/resources/quality/ultimaker_method/um_method_labs_um-nylon-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-nylon-cf-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..29562e07969 --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_labs_um-nylon-cf-175_0.2mm.inst.cfg @@ -0,0 +1,60 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed_max = 65 +cool_min_layer_time = 3.5 +cool_min_speed = 7 +cool_min_temperature = =default_material_print_temperature-5 +initial_layer_line_width_factor = 120 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.18 +raft_base_infill_overlap = 5 +raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1 +raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_speed = =raft_speed * 7 +raft_interface_z_offset = -0.08 +raft_surface_flow = 105 +raft_surface_infill_overlap = 35 +raft_surface_line_spacing = 0.42 +raft_surface_speed = =raft_speed * 7 +raft_surface_thickness = 0.27 +raft_surface_z_offset = -0.08 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = 12.0 +support_line_width = =line_width * 0.75 +support_material_flow = 90 +support_roof_density = 85 +support_xy_distance = 0.3 +support_z_distance = =layer_height + diff --git a/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg index 26ad40893d1..a8aff67472b 100644 --- a/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg @@ -23,12 +23,12 @@ raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 retraction_amount = 0.5 retraction_min_travel = 3.2 small_skin_width = 3.6 -speed_prime_tower = 30.0 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 55 -speed_topbottom = 55 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_method/um_method_labs_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-petg-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..420461b125b --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_labs_um-petg-175_0.2mm.inst.cfg @@ -0,0 +1,69 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_petg_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_speed = 5 +initial_layer_line_width_factor = 150 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.2 +raft_base_infill_overlap = 10 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_infill_overlap = 35 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 40 +raft_interface_thickness = 0.2 +raft_speed = 15 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 40 +raft_surface_wall_count = 2 +skin_overlap = 10 +speed_layer_0 = 15 +speed_print = 60 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 40 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 83 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow +support_offset = 3 +support_roof_density = =support_interface_density +support_roof_line_width = =line_width +support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max +support_top_distance = =support_z_distance +support_xy_distance = 0.3 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.2 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg index 8e29548abfd..6fedd008682 100644 --- a/resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg @@ -12,15 +12,12 @@ variant = LABS weight = -2 [values] -bottom_layers = 4 cool_fan_enabled = True -cool_fan_full_layer = 4 cool_fan_speed = 100 cool_fan_speed_0 = 0 cool_min_layer_time = 10 cool_min_speed = 5 cool_min_temperature = 205 -infill_sparse_density = 15 material_final_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =default_material_print_temperature + 15 diff --git a/resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..46742b75895 --- /dev/null +++ b/resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg @@ -0,0 +1,84 @@ +[general] +definition = ultimaker_method +name = Fast +version = 4 + +[metadata] +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_min_layer_time = 10 +cool_min_speed = 5 +cool_min_temperature = 205 +infill_sparse_density = 15 +material_final_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 15 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.22 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 60 +raft_interface_thickness = 0.2 +raft_interface_z_offset = -0.1 +raft_margin = 3 +raft_speed = 15 +raft_surface_flow = 103 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 90 +raft_surface_wall_count = 2 +raft_surface_z_offset = -0.1 +seam_overhang_angle = 35 +skirt_brim_line_width = 1 +skirt_brim_minimal_length = 200 +skirt_gap = 2.0 +skirt_height = 1 +speed_layer_0 = 15 +speed_print = 150 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 65 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =support_z_distance +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 75 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow * 0.9 +support_interface_offset = 0.8 +support_interface_pattern = zigzag +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow * 0.9 +support_offset = 1 +support_pattern = zigzag +support_roof_density = =support_interface_density +support_roof_height = =layer_height * 4 +support_roof_line_width = =line_width +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.32 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.22 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-petg-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..e61deada8ac --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-petg-175_0.2mm.inst.cfg @@ -0,0 +1,69 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_petg_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1A +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_speed = 5 +initial_layer_line_width_factor = 150 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.2 +raft_base_infill_overlap = 10 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_infill_overlap = 35 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 40 +raft_interface_thickness = 0.2 +raft_speed = 15 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 40 +raft_surface_wall_count = 2 +skin_overlap = 10 +speed_layer_0 = 15 +speed_print = 60 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 40 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 83 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow +support_offset = 3 +support_roof_density = =support_interface_density +support_roof_line_width = =line_width +support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max +support_top_distance = =support_z_distance +support_xy_distance = 0.3 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.2 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg index 0954cd9362a..d7ec35c6841 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg @@ -12,15 +12,12 @@ variant = 1A weight = -2 [values] -bottom_layers = 4 cool_fan_enabled = True -cool_fan_full_layer = 4 cool_fan_speed = 100 cool_fan_speed_0 = 0 cool_min_layer_time = 10 cool_min_speed = 5 cool_min_temperature = 205 -infill_sparse_density = 15 material_final_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =default_material_print_temperature + 15 diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..73af8bcbf26 --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg @@ -0,0 +1,84 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1A +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_min_layer_time = 10 +cool_min_speed = 5 +cool_min_temperature = 205 +infill_sparse_density = 15 +material_final_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 15 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.22 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 60 +raft_interface_thickness = 0.2 +raft_interface_z_offset = -0.1 +raft_margin = 3 +raft_speed = 15 +raft_surface_flow = 103 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 90 +raft_surface_wall_count = 2 +raft_surface_z_offset = -0.1 +seam_overhang_angle = 35 +skirt_brim_line_width = 1 +skirt_brim_minimal_length = 200 +skirt_gap = 2.0 +skirt_height = 1 +speed_layer_0 = 15 +speed_print = 150 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 65 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =support_z_distance +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 75 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow * 0.9 +support_interface_offset = 0.8 +support_interface_pattern = zigzag +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow * 0.9 +support_offset = 1 +support_pattern = zigzag +support_roof_density = =support_interface_density +support_roof_height = =layer_height * 4 +support_roof_line_width = =line_width +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.32 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.22 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..e9170db215a --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm.inst.cfg @@ -0,0 +1,63 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = =extruder_nr == support_extruder_nr +cool_fan_speed = 85.0 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5) +material_final_print_temperature = 235 +material_initial_print_temperature = 235 +material_print_temperature_layer_0 = 250 +raft_airgap = =0.15 if extruder_nr == support_extruder_nr else 0 +raft_base_speed = 10 +raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8 +raft_surface_speed = 90 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 +speed_wall_x = =speed_wall +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135] +support_infill_rate = 15.0 +support_line_width = 0.3 +support_material_flow = =0.85*material_flow +support_roof_density = 85 +support_supported_skin_fan_speed = 60.0 +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.25 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.15 +top_skin_expand_distance = 2.4 +wall_overhang_angle = 30 +wall_overhang_speed_factor = 40 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg index f88e970e860..a8a1e6131a4 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -28,14 +27,14 @@ raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 raft_surface_thickness = =0.25 if extruder_nr == support_extruder_nr else 0.2 raft_surface_z_offset = =-0.075 if extruder_nr == support_extruder_nr else 0 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 55 +speed_roofing = =speed_print * 11/24 speed_support = =speed_print -speed_topbottom = 85 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_topbottom = =speed_print * 17/24 +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 52 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg index 9b3f5994a4b..382e65b9c2d 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 75 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -26,18 +25,17 @@ material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature-5 if extruder_nr == support_extruder_nr else default_material_print_temperature raft_airgap = =0.16 if extruder_nr == support_extruder_nr else 0 raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8 -raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 +raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 65 -speed_support = 100 -speed_support_interface = 75 -speed_topbottom = 55 -speed_travel = 250.0 -speed_wall = 25 -speed_wall_0 = 20 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height @@ -48,7 +46,6 @@ support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,1 support_infill_rate = 15.0 support_interface_density = 85 support_interface_enable = True -support_interface_pattern = lines support_line_width = 0.3 support_material_flow = 85 support_roof_density = 85 diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg index de573c160b3..c1d613b9979 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 85.0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -29,14 +28,14 @@ retraction_amount = 0.5 retraction_min_travel = 3.2 skin_overlap = 10 small_skin_width = 3.6 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 65 +speed_roofing = =speed_print * 13/24 speed_support = =speed_print * 5/6 -speed_support_interface = 75 -speed_topbottom = 55 -speed_wall = 25 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 speed_wall_0 = =speed_print * 1/6 speed_wall_x = =speed_wall support_angle = 50 diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-cf-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..c629a1a1fcb --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon-cf-175_0.2mm.inst.cfg @@ -0,0 +1,60 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed_max = 65 +cool_min_layer_time = 3.5 +cool_min_speed = 7 +cool_min_temperature = =default_material_print_temperature-5 +initial_layer_line_width_factor = 120 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.18 +raft_base_infill_overlap = 5 +raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1 +raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_speed = =raft_speed * 7 +raft_interface_z_offset = -0.08 +raft_surface_flow = 105 +raft_surface_infill_overlap = 35 +raft_surface_line_spacing = 0.42 +raft_surface_speed = =raft_speed * 7 +raft_surface_thickness = 0.27 +raft_surface_z_offset = -0.08 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = 12.0 +support_line_width = =line_width * 0.75 +support_material_flow = 90 +support_roof_density = 85 +support_xy_distance = 0.3 +support_z_distance = =layer_height + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg index 038dee58426..f56688dbbf1 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg @@ -23,12 +23,12 @@ raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 retraction_amount = 0.5 retraction_min_travel = 3.2 small_skin_width = 3.6 -speed_prime_tower = 30.0 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 55 -speed_topbottom = 55 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-petg-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..a16d223f2cc --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-petg-175_0.2mm.inst.cfg @@ -0,0 +1,69 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_petg_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_speed = 5 +initial_layer_line_width_factor = 150 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.2 +raft_base_infill_overlap = 10 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_infill_overlap = 35 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 40 +raft_interface_thickness = 0.2 +raft_speed = 15 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 40 +raft_surface_wall_count = 2 +skin_overlap = 10 +speed_layer_0 = 15 +speed_print = 60 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 40 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 83 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow +support_offset = 3 +support_roof_density = =support_interface_density +support_roof_line_width = =line_width +support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max +support_top_distance = =support_z_distance +support_xy_distance = 0.3 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.2 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg index cd94a847a38..1f034e1ef74 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg @@ -12,15 +12,12 @@ variant = 1C weight = -2 [values] -bottom_layers = 4 cool_fan_enabled = True -cool_fan_full_layer = 4 cool_fan_speed = 100 cool_fan_speed_0 = 0 cool_min_layer_time = 10 cool_min_speed = 5 cool_min_temperature = 205 -infill_sparse_density = 15 material_final_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =default_material_print_temperature + 15 diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..deee76d6c6f --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg @@ -0,0 +1,84 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_min_layer_time = 10 +cool_min_speed = 5 +cool_min_temperature = 205 +infill_sparse_density = 15 +material_final_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 15 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.22 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 60 +raft_interface_thickness = 0.2 +raft_interface_z_offset = -0.1 +raft_margin = 3 +raft_speed = 15 +raft_surface_flow = 103 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 90 +raft_surface_wall_count = 2 +raft_surface_z_offset = -0.1 +seam_overhang_angle = 35 +skirt_brim_line_width = 1 +skirt_brim_minimal_length = 200 +skirt_gap = 2.0 +skirt_height = 1 +speed_layer_0 = 15 +speed_print = 150 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 65 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =support_z_distance +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 75 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow * 0.9 +support_interface_offset = 0.8 +support_interface_pattern = zigzag +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow * 0.9 +support_offset = 1 +support_pattern = zigzag +support_roof_density = =support_interface_density +support_roof_height = =layer_height * 4 +support_roof_line_width = =line_width +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.32 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.22 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..8481ee5a7a6 --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm.inst.cfg @@ -0,0 +1,63 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1XA +weight = -2 + +[values] +cool_fan_enabled = =extruder_nr == support_extruder_nr +cool_fan_speed = 85.0 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5) +material_final_print_temperature = 235 +material_initial_print_temperature = 235 +material_print_temperature_layer_0 = 250 +raft_airgap = =0.15 if extruder_nr == support_extruder_nr else 0 +raft_base_speed = 10 +raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8 +raft_surface_speed = 90 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 +speed_wall_x = =speed_wall +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135] +support_infill_rate = 15.0 +support_line_width = 0.3 +support_material_flow = =0.85*material_flow +support_roof_density = 85 +support_supported_skin_fan_speed = 60.0 +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.25 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.15 +top_skin_expand_distance = 2.4 +wall_overhang_angle = 30 +wall_overhang_speed_factor = 40 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg index bd0bc29c937..a4478dd3f81 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 75 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -26,18 +25,17 @@ material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature-5 if extruder_nr == support_extruder_nr else default_material_print_temperature raft_airgap = =0.16 if extruder_nr == support_extruder_nr else 0 raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8 -raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 +raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 65 -speed_support = 100 -speed_support_interface = 75 -speed_topbottom = 55 -speed_travel = 250.0 -speed_wall = 25 -speed_wall_0 = 20 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height @@ -48,7 +46,6 @@ support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,1 support_infill_rate = 15.0 support_interface_density = 85 support_interface_enable = True -support_interface_pattern = lines support_line_width = 0.3 support_material_flow = 85 support_roof_density = 85 diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg index 426294338c1..b281f4c1074 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 85.0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -29,14 +28,14 @@ retraction_amount = 0.5 retraction_min_travel = 3.2 skin_overlap = 10 small_skin_width = 3.6 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 65 +speed_roofing = =speed_print * 13/24 speed_support = =speed_print * 5/6 -speed_support_interface = 75 -speed_topbottom = 55 -speed_wall = 25 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 speed_wall_0 = =speed_print * 1/6 speed_wall_x = =speed_wall support_angle = 50 diff --git a/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg index 9c2e0c66ed6..c3a608dfe02 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg @@ -26,22 +26,22 @@ raft_interface_infill_overlap = 50 raft_interface_layers = 1 raft_interface_line_spacing = =1.08 if raft_base_thickness == 0.5 else 0.9 raft_interface_line_width = =1.2 if raft_base_thickness == 0.5 else 1 -raft_interface_speed = 15 +raft_interface_speed = =speed_print * 3/10 raft_interface_z_offset = =-0.1 if raft_base_thickness == 0.5 else -0.05 raft_surface_flow = 110 raft_surface_infill_overlap = 50 raft_surface_line_spacing = 0.44 -raft_surface_speed = 20 +raft_surface_speed = =speed_print * 2/5 raft_surface_thickness = 0.27 raft_surface_z_offset = -0.075 retraction_min_travel = 5 retraction_speed = 1.75 -speed_layer_0 = 10 -speed_prime_tower = 10 +speed_layer_0 = =speed_print * 1/5 +speed_prime_tower = =speed_print * 1/5 speed_print = 50 speed_roofing = =speed_print speed_support = =speed_print -speed_support_bottom = 10 +speed_support_bottom = =speed_print * 1/5 speed_support_interface = =speed_print speed_topbottom = =speed_print speed_wall_0 = =speed_print @@ -59,11 +59,10 @@ support_infill_rate = 12 support_interface_offset = 0 support_interface_wall_count = 2 support_offset = 1.8 -support_pattern = grid +support_pattern = zigzag support_roof_density = 95 support_roof_height = =layer_height*8 support_roof_line_width = 0.4 -support_use_towers = True switch_extruder_extra_prime_amount = 1 switch_extruder_retraction_amount = 2.5 switch_extruder_retraction_speeds = 3 diff --git a/resources/quality/ultimaker_methodx/um_methodx_2xa_um-rapidrinse-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_2xa_um-rapidrinse-175_0.2mm.inst.cfg index 4185387c5a2..de37635939f 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_2xa_um-rapidrinse-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_2xa_um-rapidrinse-175_0.2mm.inst.cfg @@ -16,6 +16,10 @@ brim_replaces_support = False cool_fan_enabled = False cool_min_temperature = =material_print_temperature raft_airgap = 0.0 +raft_interface_flow = 110 +raft_interface_infill_overlap = 25 +raft_interface_speed = 90 +raft_interface_z_offset = -0.1 retract_at_layer_change = True retraction_min_travel = 5 speed_prime_tower = 25.0 @@ -34,9 +38,7 @@ support_conical_min_width = 20 support_fan_enable = False support_interface_offset = 0 support_interface_wall_count = 2 -support_offset = 1.8 support_roof_height = =5*layer_height support_roof_line_width = 0.25 -support_use_towers = True support_xy_distance_overhang = 0.15 diff --git a/resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg index 44f221726d0..ca0ca7de6cf 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg @@ -16,21 +16,25 @@ brim_replaces_support = False cool_fan_enabled = False cool_min_temperature = =material_print_temperature raft_airgap = 0.0 +raft_interface_flow = 110 +raft_interface_infill_overlap = 25 raft_interface_line_width = 0.7 -raft_interface_speed = 70 -raft_surface_speed = 90 +raft_interface_speed = =speed_print * 5/9 +raft_interface_z_offset = -0.1 +raft_surface_speed = =speed_print retract_at_layer_change = True retraction_amount = 0.5 retraction_min_travel = 5 -speed_prime_tower = 25.0 -speed_print = 50 -speed_roofing = =speed_print +speed_prime_tower = =speed_print * 1/3 +speed_print = 90 +speed_roofing = =speed_print * 5/9 speed_support = =speed_print -speed_support_bottom = =speed_print * 3/5 -speed_support_interface = =speed_print -speed_topbottom = =speed_print -speed_wall_0 = =speed_print -speed_wall_x = =speed_wall_0 +speed_support_bottom = =speed_print * 1/3 +speed_support_interface = =speed_print * 5/9 +speed_topbottom = =speed_print * 5/9 +speed_wall = =speed_print * 5/9 +speed_wall_0 = =speed_wall * 4/5 +speed_wall_x = =speed_wall support_bottom_wall_count = 5 support_conical_angle = 20 support_conical_enabled = True @@ -38,7 +42,5 @@ support_conical_min_width = 20 support_fan_enable = False support_interface_offset = 0 support_interface_wall_count = 2 -support_offset = 0.8 support_roof_height = =5*layer_height -support_use_towers = True diff --git a/resources/quality/ultimaker_methodx/um_methodx_global_Fast_Quality.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_global_Fast_Quality.inst.cfg new file mode 100644 index 00000000000..22becb55c90 --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_global_Fast_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_methodx +name = Normal +version = 4 + +[metadata] +global_quality = True +quality_type = fast +setting_version = 23 +type = quality +weight = -2 + +[values] +layer_height = 0.1524 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..36db7aed8d6 --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm.inst.cfg @@ -0,0 +1,63 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = =extruder_nr == support_extruder_nr +cool_fan_speed = 85.0 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5) +material_final_print_temperature = 235 +material_initial_print_temperature = 235 +material_print_temperature_layer_0 = 250 +raft_airgap = =0.15 if extruder_nr == support_extruder_nr else 0 +raft_base_speed = 10 +raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8 +raft_surface_speed = 90 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 +speed_wall_x = =speed_wall +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135] +support_infill_rate = 15.0 +support_line_width = 0.3 +support_material_flow = =0.85*material_flow +support_roof_density = 85 +support_supported_skin_fan_speed = 60.0 +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.25 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.15 +top_skin_expand_distance = 2.4 +wall_overhang_angle = 30 +wall_overhang_speed_factor = 40 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg index 6e2b8038655..c6ad6f86daa 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -28,14 +27,14 @@ raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 raft_surface_thickness = =0.25 if extruder_nr == support_extruder_nr else 0.2 raft_surface_z_offset = =-0.075 if extruder_nr == support_extruder_nr else 0 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 55 +speed_roofing = =speed_print * 11/24 speed_support = =speed_print -speed_topbottom = 85 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_topbottom = =speed_print * 17/24 +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 52 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg index af00dbfeb36..e5862914f69 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 75 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -26,18 +25,17 @@ material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature-5 if extruder_nr == support_extruder_nr else default_material_print_temperature raft_airgap = =0.16 if extruder_nr == support_extruder_nr else 0 raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8 -raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 +raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 65 -speed_support = 100 -speed_support_interface = 75 -speed_topbottom = 55 -speed_travel = 250.0 -speed_wall = 25 -speed_wall_0 = 20 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height @@ -48,7 +46,6 @@ support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,1 support_infill_rate = 15.0 support_interface_density = 85 support_interface_enable = True -support_interface_pattern = lines support_line_width = 0.3 support_material_flow = 85 support_roof_density = 85 diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg index 4db0b6b7ecd..720e0c81b09 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 85.0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -29,14 +28,14 @@ retraction_amount = 0.5 retraction_min_travel = 3.2 skin_overlap = 10 small_skin_width = 3.6 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 65 +speed_roofing = =speed_print * 13/24 speed_support = =speed_print * 5/6 -speed_support_interface = 75 -speed_topbottom = 55 -speed_wall = 25 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 speed_wall_0 = =speed_print * 1/6 speed_wall_x = =speed_wall support_angle = 50 diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-cf-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..99dceedb0aa --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon-cf-175_0.2mm.inst.cfg @@ -0,0 +1,60 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed_max = 65 +cool_min_layer_time = 3.5 +cool_min_speed = 7 +cool_min_temperature = =default_material_print_temperature-5 +initial_layer_line_width_factor = 120 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.18 +raft_base_infill_overlap = 5 +raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1 +raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_speed = =raft_speed * 7 +raft_interface_z_offset = -0.08 +raft_surface_flow = 105 +raft_surface_infill_overlap = 35 +raft_surface_line_spacing = 0.42 +raft_surface_speed = =raft_speed * 7 +raft_surface_thickness = 0.27 +raft_surface_z_offset = -0.08 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = 12.0 +support_line_width = =line_width * 0.75 +support_material_flow = 90 +support_roof_density = 85 +support_xy_distance = 0.3 +support_z_distance = =layer_height + diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg index 00b5775c9bd..32281bdff4b 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg @@ -23,12 +23,12 @@ raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 retraction_amount = 0.5 retraction_min_travel = 3.2 small_skin_width = 3.6 -speed_prime_tower = 30.0 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 55 -speed_topbottom = 55 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-petg-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..f92032bdd9d --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-petg-175_0.2mm.inst.cfg @@ -0,0 +1,69 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_petg_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_speed = 5 +initial_layer_line_width_factor = 150 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.2 +raft_base_infill_overlap = 10 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_infill_overlap = 35 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 40 +raft_interface_thickness = 0.2 +raft_speed = 15 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 40 +raft_surface_wall_count = 2 +skin_overlap = 10 +speed_layer_0 = 15 +speed_print = 60 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 40 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 83 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow +support_offset = 3 +support_roof_density = =support_interface_density +support_roof_line_width = =line_width +support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max +support_top_distance = =support_z_distance +support_xy_distance = 0.3 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.2 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg index d4e56ee1665..c40f7a5e1d8 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg @@ -12,15 +12,12 @@ variant = LABS weight = -2 [values] -bottom_layers = 4 cool_fan_enabled = True -cool_fan_full_layer = 4 cool_fan_speed = 100 cool_fan_speed_0 = 0 cool_min_layer_time = 10 cool_min_speed = 5 cool_min_temperature = 205 -infill_sparse_density = 15 material_final_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =default_material_print_temperature + 15 diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..05aecd05420 --- /dev/null +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg @@ -0,0 +1,84 @@ +[general] +definition = ultimaker_methodx +name = Fast +version = 4 + +[metadata] +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_min_layer_time = 10 +cool_min_speed = 5 +cool_min_temperature = 205 +infill_sparse_density = 15 +material_final_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 15 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.22 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_layers = 1 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 60 +raft_interface_thickness = 0.2 +raft_interface_z_offset = -0.1 +raft_margin = 3 +raft_speed = 15 +raft_surface_flow = 103 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 90 +raft_surface_wall_count = 2 +raft_surface_z_offset = -0.1 +seam_overhang_angle = 35 +skirt_brim_line_width = 1 +skirt_brim_minimal_length = 200 +skirt_gap = 2.0 +skirt_height = 1 +speed_layer_0 = 15 +speed_print = 150 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 65 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =support_z_distance +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 75 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow * 0.9 +support_interface_offset = 0.8 +support_interface_pattern = zigzag +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow * 0.9 +support_offset = 1 +support_pattern = zigzag +support_roof_density = =support_interface_density +support_roof_height = =layer_height * 4 +support_roof_line_width = =line_width +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.32 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.22 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-petg-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..8b4f91cd675 --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-petg-175_0.2mm.inst.cfg @@ -0,0 +1,67 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_petg_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1A +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_speed = 5 +initial_layer_line_width_factor = 150 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.2 +raft_base_infill_overlap = 10 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_infill_overlap = 35 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 40 +raft_speed = 15 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 40 +raft_surface_wall_count = 2 +skin_overlap = 10 +speed_layer_0 = 15 +speed_print = 60 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 40 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 83 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow +support_offset = 3 +support_roof_density = =support_interface_density +support_roof_line_width = =line_width +support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max +support_top_distance = =support_z_distance +support_xy_distance = 0.3 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.2 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg index d4c3f1fad27..1c788d0ecbe 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg @@ -12,15 +12,12 @@ variant = 1A weight = -2 [values] -bottom_layers = 4 cool_fan_enabled = True -cool_fan_full_layer = 4 cool_fan_speed = 100 cool_fan_speed_0 = 0 cool_min_layer_time = 10 cool_min_speed = 5 cool_min_temperature = 205 -infill_sparse_density = 15 material_final_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =default_material_print_temperature + 15 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..fa8a3ea69cc --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg @@ -0,0 +1,82 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1A +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_min_layer_time = 10 +cool_min_speed = 5 +cool_min_temperature = 205 +infill_sparse_density = 15 +material_final_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 15 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.22 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 60 +raft_interface_z_offset = -0.1 +raft_margin = 3 +raft_speed = 15 +raft_surface_flow = 103 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 90 +raft_surface_wall_count = 2 +raft_surface_z_offset = -0.1 +seam_overhang_angle = 35 +skirt_brim_line_width = 1 +skirt_brim_minimal_length = 200 +skirt_gap = 2.0 +skirt_height = 1 +speed_layer_0 = 15 +speed_print = 150 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 65 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =support_z_distance +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 75 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow * 0.9 +support_interface_offset = 0.8 +support_interface_pattern = zigzag +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow * 0.9 +support_offset = 1 +support_pattern = zigzag +support_roof_density = =support_interface_density +support_roof_height = =layer_height * 4 +support_roof_line_width = =line_width +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.32 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.22 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..f95261eaf7c --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm.inst.cfg @@ -0,0 +1,63 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = =extruder_nr == support_extruder_nr +cool_fan_speed = 85.0 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5) +material_final_print_temperature = 235 +material_initial_print_temperature = 235 +material_print_temperature_layer_0 = 250 +raft_airgap = =0.15 if extruder_nr == support_extruder_nr else 0 +raft_base_speed = 10 +raft_surface_speed = 90 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_travel_layer_0 = 250 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 +speed_wall_x = =speed_wall +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135] +support_infill_rate = 15.0 +support_line_width = 0.3 +support_material_flow = =0.85*material_flow +support_roof_density = 85 +support_supported_skin_fan_speed = 60.0 +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.25 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.15 +top_skin_expand_distance = 2.4 +wall_overhang_angle = 30 +wall_overhang_speed_factor = 40 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg index cafdccde668..e97cdb71265 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] build_volume_temperature = 85 cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -30,14 +29,14 @@ raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 raft_surface_thickness = =0.25 if extruder_nr == support_extruder_nr else 0.2 raft_surface_z_offset = =-0.075 if extruder_nr == support_extruder_nr else 0 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 55 +speed_roofing = =speed_print * 11/24 speed_support = =speed_print -speed_topbottom = 85 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_topbottom = =speed_print * 17/24 +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 52 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg index 8917031687b..87771d65e80 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 75 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -25,18 +24,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature-5 if extruder_nr == support_extruder_nr else default_material_print_temperature raft_airgap = =0.18 if extruder_nr == support_extruder_nr else 0 -raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 +raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 65 -speed_support = 100 -speed_support_interface = 75 -speed_topbottom = 55 -speed_travel = 250.0 -speed_wall = 25 -speed_wall_0 = 20 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height @@ -47,7 +45,6 @@ support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,1 support_infill_rate = 15.0 support_interface_density = 85 support_interface_enable = True -support_interface_pattern = lines support_line_width = 0.3 support_material_flow = 85 support_roof_density = 85 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg index 9a1f0e2aa65..009880301a0 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 85.0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -28,15 +27,15 @@ retraction_amount = 0.5 retraction_min_travel = 3.2 skin_overlap = 10 small_skin_width = 3.6 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 65 +speed_roofing = =speed_print * 13/24 speed_support = =speed_print * 5/6 -speed_support_interface = 75 -speed_topbottom = 55 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 speed_travel_layer_0 = 250 -speed_wall = 25 +speed_wall = =speed_print * 5/24 speed_wall_0 = =speed_print * 1/6 speed_wall_x = =speed_wall support_angle = 50 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon-cf-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..eb081e421e4 --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon-cf-175_0.2mm.inst.cfg @@ -0,0 +1,60 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed_max = 65 +cool_min_layer_time = 3.5 +cool_min_speed = 7 +cool_min_temperature = =default_material_print_temperature-5 +initial_layer_line_width_factor = 120 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.18 +raft_base_infill_overlap = 5 +raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1 +raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_speed = =raft_speed * 7 +raft_interface_z_offset = -0.08 +raft_surface_flow = 105 +raft_surface_infill_overlap = 35 +raft_surface_line_spacing = 0.42 +raft_surface_speed = =raft_speed * 7 +raft_surface_thickness = 0.27 +raft_surface_z_offset = -0.08 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = 12.0 +support_line_width = =line_width * 0.75 +support_material_flow = 90 +support_roof_density = 85 +support_xy_distance = 0.3 +support_z_distance = =layer_height + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg index e930693690f..e5ff11f04ad 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg @@ -23,12 +23,12 @@ raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 retraction_amount = 0.5 retraction_min_travel = 3.2 small_skin_width = 3.6 -speed_prime_tower = 30.0 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 55 -speed_topbottom = 55 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-petg-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..a6f2f15159d --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-petg-175_0.2mm.inst.cfg @@ -0,0 +1,67 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_petg_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_speed = 5 +initial_layer_line_width_factor = 150 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.2 +raft_base_infill_overlap = 10 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_infill_overlap = 35 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 40 +raft_speed = 15 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 40 +raft_surface_wall_count = 2 +skin_overlap = 10 +speed_layer_0 = 15 +speed_print = 60 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 40 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 83 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow +support_offset = 3 +support_roof_density = =support_interface_density +support_roof_line_width = =line_width +support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max +support_top_distance = =support_z_distance +support_xy_distance = 0.3 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.2 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg index 5e2b40209cf..afe4286ff2b 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg @@ -12,15 +12,12 @@ variant = 1C weight = -2 [values] -bottom_layers = 4 cool_fan_enabled = True -cool_fan_full_layer = 4 cool_fan_speed = 100 cool_fan_speed_0 = 0 cool_min_layer_time = 10 cool_min_speed = 5 cool_min_temperature = 205 -infill_sparse_density = 15 material_final_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =default_material_print_temperature + 15 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..a8183e2e877 --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg @@ -0,0 +1,82 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1C +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_min_layer_time = 10 +cool_min_speed = 5 +cool_min_temperature = 205 +infill_sparse_density = 15 +material_final_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 15 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.22 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 60 +raft_interface_z_offset = -0.1 +raft_margin = 3 +raft_speed = 15 +raft_surface_flow = 103 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 90 +raft_surface_wall_count = 2 +raft_surface_z_offset = -0.1 +seam_overhang_angle = 35 +skirt_brim_line_width = 1 +skirt_brim_minimal_length = 200 +skirt_gap = 2.0 +skirt_height = 1 +speed_layer_0 = 15 +speed_print = 150 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 65 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =support_z_distance +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 75 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow * 0.9 +support_interface_offset = 0.8 +support_interface_pattern = zigzag +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow * 0.9 +support_offset = 1 +support_pattern = zigzag +support_roof_density = =support_interface_density +support_roof_height = =layer_height * 4 +support_roof_line_width = =line_width +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.32 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.22 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..ff53e2ec220 --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm.inst.cfg @@ -0,0 +1,63 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = quality +variant = 1XA +weight = -2 + +[values] +cool_fan_enabled = =extruder_nr == support_extruder_nr +cool_fan_speed = 85.0 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5) +material_final_print_temperature = 235 +material_initial_print_temperature = 235 +material_print_temperature_layer_0 = 250 +raft_airgap = =0.15 if extruder_nr == support_extruder_nr else 0 +raft_base_speed = 10 +raft_surface_speed = 90 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_travel_layer_0 = 250 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 +speed_wall_x = =speed_wall +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135] +support_infill_rate = 15.0 +support_line_width = 0.3 +support_material_flow = =0.85*material_flow +support_roof_density = 85 +support_supported_skin_fan_speed = 60.0 +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.25 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.15 +top_skin_expand_distance = 2.4 +wall_overhang_angle = 30 +wall_overhang_speed_factor = 40 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg index e002c7fa649..483a2d24356 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 75 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -25,18 +24,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature-5 if extruder_nr == support_extruder_nr else default_material_print_temperature raft_airgap = =0.18 if extruder_nr == support_extruder_nr else 0 -raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 +raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 65 -speed_support = 100 -speed_support_interface = 75 -speed_topbottom = 55 -speed_travel = 250.0 -speed_wall = 25 -speed_wall_0 = 20 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height @@ -47,7 +45,6 @@ support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,1 support_infill_rate = 15.0 support_interface_density = 85 support_interface_enable = True -support_interface_pattern = lines support_line_width = 0.3 support_material_flow = 85 support_roof_density = 85 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg index bfb99a0484b..34fabcf3550 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 85.0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -28,15 +27,15 @@ retraction_amount = 0.5 retraction_min_travel = 3.2 skin_overlap = 10 small_skin_width = 3.6 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 65 +speed_roofing = =speed_print * 13/24 speed_support = =speed_print * 5/6 -speed_support_interface = 75 -speed_topbottom = 55 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 speed_travel_layer_0 = 250 -speed_wall = 25 +speed_wall = =speed_print * 5/24 speed_wall_0 = =speed_print * 1/6 speed_wall_x = =speed_wall support_angle = 50 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg index 9534302ee28..d110489341c 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg @@ -26,22 +26,22 @@ raft_interface_infill_overlap = 50 raft_interface_layers = 1 raft_interface_line_spacing = =1.08 if raft_base_thickness == 0.5 else 0.9 raft_interface_line_width = =1.2 if raft_base_thickness == 0.5 else 1 -raft_interface_speed = 15 +raft_interface_speed = =speed_print * 3/10 raft_interface_z_offset = =-0.1 if raft_base_thickness == 0.5 else -0.05 raft_surface_flow = 110 raft_surface_infill_overlap = 50 raft_surface_line_spacing = 0.44 -raft_surface_speed = 20 +raft_surface_speed = =speed_print * 2/5 raft_surface_thickness = 0.27 raft_surface_z_offset = -0.075 retraction_min_travel = 5 retraction_speed = 1.75 -speed_layer_0 = 10 -speed_prime_tower = 10 +speed_layer_0 = =speed_print * 1/5 +speed_prime_tower = =speed_print * 1/5 speed_print = 50 speed_roofing = =speed_print speed_support = =speed_print -speed_support_bottom = 10 +speed_support_bottom = =speed_print * 1/5 speed_support_interface = =speed_print speed_topbottom = =speed_print speed_wall_0 = =speed_print @@ -59,11 +59,10 @@ support_infill_rate = 12 support_interface_offset = 0 support_interface_wall_count = 2 support_offset = 1.8 -support_pattern = grid +support_pattern = zigzag support_roof_density = 95 support_roof_height = =layer_height*8 support_roof_line_width = 0.4 -support_use_towers = True switch_extruder_extra_prime_amount = 1 switch_extruder_retraction_amount = 2.5 switch_extruder_retraction_speeds = 3 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-rapidrinse-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-rapidrinse-175_0.2mm.inst.cfg index 50ba0208f7b..dbb3d2b1087 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-rapidrinse-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-rapidrinse-175_0.2mm.inst.cfg @@ -16,6 +16,10 @@ brim_replaces_support = False cool_fan_enabled = False cool_min_temperature = =material_print_temperature raft_airgap = 0.0 +raft_interface_flow = 110 +raft_interface_infill_overlap = 25 +raft_interface_speed = 90 +raft_interface_z_offset = -0.1 retract_at_layer_change = True retraction_min_travel = 5 speed_prime_tower = 25.0 @@ -34,9 +38,7 @@ support_conical_min_width = 20 support_fan_enable = False support_interface_offset = 0 support_interface_wall_count = 2 -support_offset = 1.8 support_roof_height = =5*layer_height support_roof_line_width = 0.25 -support_use_towers = True support_xy_distance_overhang = 0.15 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg index d4e0c0dd1a3..51277840cb8 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg @@ -16,21 +16,25 @@ brim_replaces_support = False cool_fan_enabled = False cool_min_temperature = =material_print_temperature raft_airgap = 0.0 +raft_interface_flow = 110 +raft_interface_infill_overlap = 25 raft_interface_line_width = 0.7 -raft_interface_speed = 70 -raft_surface_speed = 90 +raft_interface_speed = =speed_print * 5/9 +raft_interface_z_offset = -0.1 +raft_surface_speed = =speed_print retract_at_layer_change = True retraction_amount = 0.5 retraction_min_travel = 5 -speed_prime_tower = 25.0 -speed_print = 50 -speed_roofing = =speed_print +speed_prime_tower = =speed_print * 1/3 +speed_print = 90 +speed_roofing = =speed_print * 5/9 speed_support = =speed_print -speed_support_bottom = =speed_print * 3/5 -speed_support_interface = =speed_print -speed_topbottom = =speed_print -speed_wall_0 = =speed_print -speed_wall_x = =speed_wall_0 +speed_support_bottom = =speed_print * 1/3 +speed_support_interface = =speed_print * 5/9 +speed_topbottom = =speed_print * 5/9 +speed_wall = =speed_print * 5/9 +speed_wall_0 = =speed_wall * 4/5 +speed_wall_x = =speed_wall support_bottom_wall_count = 5 support_conical_angle = 20 support_conical_enabled = True @@ -38,7 +42,5 @@ support_conical_min_width = 20 support_fan_enable = False support_interface_offset = 0 support_interface_wall_count = 2 -support_offset = 0.8 support_roof_height = =5*layer_height -support_use_towers = True diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_global_Fast_Quality.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_global_Fast_Quality.inst.cfg new file mode 100644 index 00000000000..9b598c2c057 --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_global_Fast_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_methodxl +name = Normal +version = 4 + +[metadata] +global_quality = True +quality_type = fast +setting_version = 23 +type = quality +weight = -2 + +[values] +layer_height = 0.15 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..6f0ac5328eb --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm.inst.cfg @@ -0,0 +1,63 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_abs_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = =extruder_nr == support_extruder_nr +cool_fan_speed = 85.0 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5) +material_final_print_temperature = 235 +material_initial_print_temperature = 235 +material_print_temperature_layer_0 = 250 +raft_airgap = =0.15 if extruder_nr == support_extruder_nr else 0 +raft_base_speed = 10 +raft_surface_speed = 90 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_travel_layer_0 = 250 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 +speed_wall_x = =speed_wall +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135] +support_infill_rate = 15.0 +support_line_width = 0.3 +support_material_flow = =0.85*material_flow +support_roof_density = 85 +support_supported_skin_fan_speed = 60.0 +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.25 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.15 +top_skin_expand_distance = 2.4 +wall_overhang_angle = 30 +wall_overhang_speed_factor = 40 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg index 139736f7a37..4a6a7f11d7e 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg @@ -14,7 +14,6 @@ weight = -2 [values] build_volume_temperature = 85 cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -30,14 +29,14 @@ raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 raft_surface_thickness = =0.25 if extruder_nr == support_extruder_nr else 0.2 raft_surface_z_offset = =-0.075 if extruder_nr == support_extruder_nr else 0 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 55 +speed_roofing = =speed_print * 11/24 speed_support = =speed_print -speed_topbottom = 85 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_topbottom = =speed_print * 17/24 +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 52 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg index 1d48bca4677..6ba2c6fbfd6 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 75 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -25,18 +24,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature-5 if extruder_nr == support_extruder_nr else default_material_print_temperature raft_airgap = =0.18 if extruder_nr == support_extruder_nr else 0 -raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50 +raft_surface_speed = =speed_print * 3/4 if extruder_nr == support_extruder_nr else 50 skin_overlap = 10 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 1/4 speed_print = 120.0 -speed_roofing = 65 -speed_support = 100 -speed_support_interface = 75 -speed_topbottom = 55 -speed_travel = 250.0 -speed_wall = 25 -speed_wall_0 = 20 +speed_roofing = =speed_print * 13/24 +speed_support = =speed_print * 5/6 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 +speed_wall = =speed_print * 5/24 +speed_wall_0 = =speed_print * 1/6 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height @@ -47,7 +45,6 @@ support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,1 support_infill_rate = 15.0 support_interface_density = 85 support_interface_enable = True -support_interface_pattern = lines support_line_width = 0.3 support_material_flow = 85 support_roof_density = 85 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg index 657f43af9c2..a4b42ed5a5c 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg @@ -13,7 +13,6 @@ weight = -2 [values] cool_fan_enabled = =extruder_nr == support_extruder_nr -cool_fan_full_layer = 3 cool_fan_speed = 85.0 cool_fan_speed_0 = 0 cool_fan_speed_max = 100 @@ -28,15 +27,15 @@ retraction_amount = 0.5 retraction_min_travel = 3.2 skin_overlap = 10 small_skin_width = 3.6 -speed_layer_0 = 35 -speed_prime_tower = 30.0 +speed_layer_0 = =speed_print * 7/24 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 65 +speed_roofing = =speed_print * 13/24 speed_support = =speed_print * 5/6 -speed_support_interface = 75 -speed_topbottom = 55 +speed_support_interface = =speed_print * 15/24 +speed_topbottom = =speed_print * 11/24 speed_travel_layer_0 = 250 -speed_wall = 25 +speed_wall = =speed_print * 5/24 speed_wall_0 = =speed_print * 1/6 speed_wall_x = =speed_wall support_angle = 50 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon-cf-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..de870da341f --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon-cf-175_0.2mm.inst.cfg @@ -0,0 +1,60 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_nylon-cf_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed_max = 65 +cool_min_layer_time = 3.5 +cool_min_speed = 7 +cool_min_temperature = =default_material_print_temperature-5 +initial_layer_line_width_factor = 120 +material_final_print_temperature = =default_material_print_temperature-5 +material_initial_print_temperature = =default_material_print_temperature-5 +raft_airgap = 0.18 +raft_base_infill_overlap = 5 +raft_base_line_spacing = =3 if extruder_nr == raft_interface_extruder_nr else 2 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1 +raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_speed = =raft_speed * 7 +raft_interface_z_offset = -0.08 +raft_surface_flow = 105 +raft_surface_infill_overlap = 35 +raft_surface_line_spacing = 0.42 +raft_surface_speed = =raft_speed * 7 +raft_surface_thickness = 0.27 +raft_surface_z_offset = -0.08 +retraction_amount = 0.5 +retraction_min_travel = 3.2 +skin_overlap = 10 +small_skin_width = 3.6 +speed_prime_tower = =speed_print * 0.25 +speed_print = 120.0 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 +support_angle = 50 +support_bottom_density = 24 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_bottom_line_width = 0.6 +support_bottom_stair_step_height = 0 +support_infill_rate = 12.0 +support_line_width = =line_width * 0.75 +support_material_flow = 90 +support_roof_density = 85 +support_xy_distance = 0.3 +support_z_distance = =layer_height + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg index d65d25f15ef..92044f84494 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg @@ -23,12 +23,12 @@ raft_base_thickness = =0.6 if extruder_nr == raft_interface_extruder_nr else 0.5 retraction_amount = 0.5 retraction_min_travel = 3.2 small_skin_width = 3.6 -speed_prime_tower = 30.0 +speed_prime_tower = =speed_print * 0.25 speed_print = 120.0 -speed_roofing = 55 -speed_topbottom = 55 -speed_wall_0 = 45 -speed_wall_x = 65 +speed_roofing = =speed_print * 11/24 +speed_topbottom = =speed_roofing +speed_wall_0 = =speed_print * 9/24 +speed_wall_x = =speed_print * 13/24 support_angle = 50 support_bottom_density = 24 support_bottom_distance = =layer_height diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-petg-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..4a9d1b14055 --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-petg-175_0.2mm.inst.cfg @@ -0,0 +1,67 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_petg_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_0 = 0 +cool_fan_speed_max = 100 +cool_min_layer_time = 10 +cool_min_speed = 5 +initial_layer_line_width_factor = 150 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.2 +raft_base_infill_overlap = 10 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_infill_overlap = 35 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 40 +raft_speed = 15 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 40 +raft_surface_wall_count = 2 +skin_overlap = 10 +speed_layer_0 = 15 +speed_print = 60 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 40 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =layer_height +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 83 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow +support_offset = 3 +support_roof_density = =support_interface_density +support_roof_line_width = =line_width +support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max +support_top_distance = =support_z_distance +support_xy_distance = 0.3 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.2 +switch_extruder_retraction_amount = 1 + diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg index 52b9b334a53..1d66d8c24a3 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg @@ -12,15 +12,12 @@ variant = LABS weight = -2 [values] -bottom_layers = 4 cool_fan_enabled = True -cool_fan_full_layer = 4 cool_fan_speed = 100 cool_fan_speed_0 = 0 cool_min_layer_time = 10 cool_min_speed = 5 cool_min_temperature = 205 -infill_sparse_density = 15 material_final_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =default_material_print_temperature + 15 diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..2fcd1a6e5a9 --- /dev/null +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg @@ -0,0 +1,82 @@ +[general] +definition = ultimaker_methodxl +name = Fast +version = 4 + +[metadata] +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 23 +type = quality +variant = LABS +weight = -2 + +[values] +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_0 = 0 +cool_min_layer_time = 10 +cool_min_speed = 5 +cool_min_temperature = 205 +infill_sparse_density = 15 +material_final_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 15 +min_bead_width = =line_width * 0.75 +min_wall_line_width = =line_width * 0.75 +raft_airgap = 0.22 +raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8 +raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4 +raft_base_thickness = 0.6 +raft_interface_flow = 105 +raft_interface_infill_overlap = 25 +raft_interface_line_spacing = 0.75 +raft_interface_speed = 60 +raft_interface_z_offset = -0.1 +raft_margin = 3 +raft_speed = 15 +raft_surface_flow = 103 +raft_surface_infill_overlap = 25 +raft_surface_line_spacing = 0.425 +raft_surface_line_width = 0.4 +raft_surface_speed = 90 +raft_surface_wall_count = 2 +raft_surface_z_offset = -0.1 +seam_overhang_angle = 35 +skirt_brim_line_width = 1 +skirt_brim_minimal_length = 200 +skirt_gap = 2.0 +skirt_height = 1 +speed_layer_0 = 15 +speed_print = 150 +speed_roofing = =speed_print / 3 +speed_support = =speed_print +speed_support_interface = 65 +speed_topbottom = =speed_print * 0.6 +speed_wall = =speed_print / 6 +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +support_angle = 50.0 +support_bottom_distance = =support_z_distance +support_bottom_enable = False +support_infill_angles = [45 ] +support_infill_rate = 12 +support_interface_density = 75 +support_interface_height = =layer_height * 4 +support_interface_material_flow = =material_flow * 0.9 +support_interface_offset = 0.8 +support_interface_pattern = zigzag +support_line_width = =line_width * 0.75 +support_material_flow = =material_flow * 0.9 +support_offset = 1 +support_pattern = zigzag +support_roof_density = =support_interface_density +support_roof_height = =layer_height * 4 +support_roof_line_width = =line_width +support_top_distance = =support_z_distance +support_xy_distance = 0.35 +support_xy_distance_overhang = 0.32 +support_xy_overrides_z = xy_overrides_z +support_z_distance = 0.22 +switch_extruder_retraction_amount = 1 +