diff --git a/resources/definitions/weedo_f150s.def.json b/resources/definitions/weedo_f150s.def.json new file mode 100644 index 00000000000..05b5359cda7 --- /dev/null +++ b/resources/definitions/weedo_f150s.def.json @@ -0,0 +1,32 @@ +{ + "version": 2, + "name": "WEEDO F150S", + "inherits": "weedo_base", + "metadata": + { + "visible": true, + "author": "WEEDO", + "manufacturer": "WEEDO", + "file_formats": "text/x-gcode", + "platform_offset": [ + 0, + 0, + 0 + ] + }, + "overrides": + { + "machine_depth": { "default_value": 150 }, + "machine_end_gcode": { "default_value": ";(**** end.gcode for 150s****)\nM203 Z15\nG1 X170 Y130 F3000\nG92 E0\nG1 E-10 F1680 ; Reduce filament pressure\nG28 Z F1500; Get extruder out of way. Uncomment to use!\nM107 ; Turn off fan\n; Disable all extruder\nM104 T0 S0\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off" }, + "machine_height": { "default_value": 150 }, + "machine_name": { "default_value": "WEEDO F150S" }, + "machine_start_gcode": { "default_value": ";MachineType:{machine_name}\n;FilamentType:{material_type}\n;InfillDensity:{infill_sparse_density}\n;Extruder0Temperature:{material_print_temperature}\n;BedTemperature:{material_bed_temperature}\n\n;(**** start.gcode for (150S)****)\nM203 Z15\nM104 S170\nG28 ; Home extruder\nG1 Z140 F300\nG28 Z\nG29\nG1 Z15 F100\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM109 S{material_print_temperature_layer_0}\nG92 E0 ; Reset extruder position\nG1 X140 Y7 Z0.27 F4000\nG1 X40 Y7 Z0.27 E23 F1000\nG92 E0\nM203 Z5" }, + "machine_width": { "default_value": 200 }, + "material_bed_temperature": + { + "maximum_value": "90", + "maximum_value_warning": "70" + }, + "retraction_amount": { "default_value": 1.2 } + } +} \ No newline at end of file diff --git a/resources/definitions/weedo_f152s.def.json b/resources/definitions/weedo_f152s.def.json new file mode 100644 index 00000000000..8da41c946e8 --- /dev/null +++ b/resources/definitions/weedo_f152s.def.json @@ -0,0 +1,27 @@ +{ + "version": 2, + "name": "WEEDO F152S", + "inherits": "weedo_base", + "metadata": + { + "visible": true, + "author": "WEEDO", + "manufacturer": "WEEDO", + "file_formats": "text/x-gcode", + "platform_offset": [ + 0, + 0, + 0 + ] + }, + "overrides": + { + "machine_depth": { "default_value": 185 }, + "machine_end_gcode": { "default_value": ";(**** end.gcode for F152S****)\nM203 Z15\nG1 X170 Y130 F3000\nG92 E0\nG1 E-10 F1680\nG28 Z F400; Get extruder out of way. Uncomment to use!\nM107 ; Turn off fan\n; Disable all extruder\nM104 T0 S0\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off" }, + "machine_height": { "default_value": 195 }, + "machine_name": { "default_value": "WEEDO F152S" }, + "machine_start_gcode": { "default_value": ";MachineType:{machine_name}\n;FilamentType:{material_type}\n;InfillDensity:{infill_sparse_density}\n;Extruder0Temperature:{material_print_temperature}\n;BedTemperature:{material_bed_temperature}\n\n;(**** start.gcode for F152S ****)\nM203 Z15\nM104 S170\nG28 ; Home extruder\nG29\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG1 Z20\nM109 S{material_print_temperature_layer_0}\nG92 E0 ; Reset extruder position\nG1 X140 Y7 Z0.27 F4000\nG1 X40 Y7 Z0.27 E25 F1000\nG92 E0\nM203 Z5" }, + "machine_width": { "default_value": 200 }, + "retraction_amount": { "default_value": 1.2 } + } +} \ No newline at end of file diff --git a/resources/definitions/weedo_f370.def.json b/resources/definitions/weedo_f370.def.json new file mode 100644 index 00000000000..a967be62d22 --- /dev/null +++ b/resources/definitions/weedo_f370.def.json @@ -0,0 +1,27 @@ +{ + "version": 2, + "name": "WEEDO F370", + "inherits": "weedo_base", + "metadata": + { + "visible": true, + "author": "WEEDO", + "manufacturer": "WEEDO", + "file_formats": "text/x-gcode", + "platform_offset": [ + 0, + 0, + 0 + ] + }, + "overrides": + { + "machine_depth": { "default_value": 310 }, + "machine_end_gcode": { "default_value": ";(**** end.gcode for F370****)\nM203 Z15\nG1 X170 Y130 F3000\nG92 E0\nG1 E-10 F1680\nG28 Z F400; Get extruder out of way. Uncomment to use!\nM107 ; Turn off fan\nM104 T0 S0\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off" }, + "machine_height": { "default_value": 370 }, + "machine_name": { "default_value": "WEEDO F370" }, + "machine_start_gcode": { "default_value": ";MachineType:{machine_name}\n;FilamentType:{material_type}\n;InfillDensity:{infill_sparse_density}\n;Extruder0Temperature:{material_print_temperature}\n;BedTemperature:{material_bed_temperature}\n\n;(**** start.gcode for 370 ****)\nM203 Z15\nM104 S170\nG28 ; Home extruder\nG29\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG1 Z20\nM109 S{material_print_temperature_layer_0}\nG92 E0 ; Reset extruder position\nG1 X140 Y7 Z0.27 F4000\nG1 X40 Y7 Z0.27 E25 F1000\nG92 E0\nM203 Z2" }, + "machine_width": { "default_value": 310 }, + "retraction_amount": { "default_value": 1.2 } + } +} \ No newline at end of file diff --git a/resources/definitions/weedo_me40.def.json b/resources/definitions/weedo_me40.def.json new file mode 100644 index 00000000000..10bb8ebee22 --- /dev/null +++ b/resources/definitions/weedo_me40.def.json @@ -0,0 +1,30 @@ +{ + "version": 2, + "name": "WEEDO ME40", + "inherits": "weedo_base", + "metadata": + { + "visible": true, + "author": "WEEDO", + "manufacturer": "WEEDO", + "file_formats": "text/x-gcode", + "platform_offset": [ + 0, + 0, + 0 + ] + }, + "overrides": + { + "machine_depth": { "default_value": 300 }, + "machine_end_gcode": { "default_value": ";(**** end.gcode for ME40****)\nM203 Z15\nG1 X0 Y150 F3000\nG28 Z\nG92 E0\nG1 E-1 F1680 ; Reduce filament pressure\nM107 ; Turn off fan\n; Disable all extruder\nM104 T0 S0\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off" }, + "machine_height": { "default_value": 400 }, + "machine_name": { "default_value": "WEEDO ME40" }, + "machine_start_gcode": { "default_value": ";MachineType:{machine_name}\n;FilamentType:{material_type}\n;InfillDensity:{infill_sparse_density}\n;Extruder0Temperature:{material_print_temperature}\n;BedTemperature:{material_bed_temperature}\n\n;(**** start.gcode for ME40****)\nM203 Z15\nM104 S170\nG28 ; Home extruder\nG29\nG1 Z15\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM109 S{material_print_temperature_layer_0}\nG92 E0 ; Reset extruder position\nG1 X140 Y7 Z0.27 F4000\nG1 X40 Y7 Z0.27 E23 F1000\nG92 E0\nM203 Z8" }, + "machine_width": { "default_value": 300 }, + "speed_print": { "value": 60.0 }, + "speed_support": { "value": "round(speed_print * 0.96, 1)" }, + "speed_topbottom": { "value": "round(speed_print * 0.58, 1)" }, + "speed_wall": { "value": "speed_print / 2" } + } +} \ No newline at end of file diff --git a/resources/definitions/weedo_me40_lite.def.json b/resources/definitions/weedo_me40_lite.def.json new file mode 100644 index 00000000000..9dcb64eaeea --- /dev/null +++ b/resources/definitions/weedo_me40_lite.def.json @@ -0,0 +1,35 @@ +{ + "version": 2, + "name": "WEEDO ME40 Lite", + "inherits": "weedo_base", + "metadata": + { + "visible": true, + "author": "WEEDO", + "manufacturer": "WEEDO", + "file_formats": "text/x-gcode", + "platform_offset": [ + 0, + 0, + 0 + ] + }, + "overrides": + { + "machine_depth": { "default_value": 300 }, + "machine_end_gcode": { "default_value": ";(**** end.gcode for ME40****)\nM203 Z15\nG1 X0 Y130 F3000\nG92 E0\nG1 E-1 F1680 ; Reduce filament pressure\nM107 ; Turn off fan\n; Disable all extruder\nM104 T0 S0\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off" }, + "machine_height": { "default_value": 400 }, + "machine_name": { "default_value": "WEEDO ME40 Lite" }, + "machine_start_gcode": { "default_value": ";MachineType:{machine_name}\n;FilamentType:{material_type}\n;InfillDensity:{infill_sparse_density}\n;Extruder0Temperature:{material_print_temperature}\n;BedTemperature:{material_bed_temperature}\n\n;(**** start.gcode for ME40 Lite****)\nM203 Z15\nM104 S170\nG28 ; Home extruder\nG1 Z15\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM109 S{material_print_temperature_layer_0}\nG92 E0 ; Reset extruder position\nG1 X140 Y7 Z0.27 F4000\nG1 X40 Y7 Z0.27 E23 F1000\nG92 E0\nM203 Z8" }, + "machine_width": { "default_value": 300 }, + "material_bed_temperature": + { + "maximum_value": "90", + "maximum_value_warning": "70" + }, + "speed_print": { "value": 60.0 }, + "speed_support": { "value": "round(speed_print * 0.96, 1)" }, + "speed_topbottom": { "value": "round(speed_print * 0.58, 1)" }, + "speed_wall": { "value": "speed_print / 2" } + } +} \ No newline at end of file diff --git a/resources/definitions/weedo_x40v3.def.json b/resources/definitions/weedo_x40v3.def.json new file mode 100644 index 00000000000..539954eedbd --- /dev/null +++ b/resources/definitions/weedo_x40v3.def.json @@ -0,0 +1,46 @@ +{ + "version": 2, + "name": "WEEDO X40 V3+", + "inherits": "weedo_base", + "metadata": + { + "visible": true, + "author": "WEEDO", + "manufacturer": "WEEDO", + "file_formats": "text/x-gcode", + "machine_extruder_trains": + { + "0": "weedo_x40v3_extruder_left", + "1": "weedo_x40v3_extruder_right" + }, + "platform_offset": [ + 0, + 0, + 0 + ] + }, + "overrides": + { + "adhesion_type": { "default_value": "brim" }, + "machine_always_write_active_tool": { "default_value": true }, + "machine_depth": { "default_value": 300 }, + "machine_end_gcode": { "default_value": ";(*********end X40 End.gcode*******)\nM203 Z15\nM605 S1 ;Set to auto-park\nG28 X F3000\nG91 ; Relative positioning\nG1 E-1 ; Reduce filament pressure\nG90\nG1 Y300 F3000\nM104 S0 T0\nM104 S0 T1\nM140 S0\nM107 P0\nM107 P1\nM82" }, + "machine_extruder_count": { "default_value": 2 }, + "machine_height": { "default_value": 400 }, + "machine_name": { "default_value": "WEEDO X40" }, + "machine_nozzle_heat_up_speed": { "default_value": 1.7 }, + "machine_start_gcode": { "default_value": ";MachineType:{machine_name}\n;FilamentType:{material_type}\n;InfillDensity:{infill_sparse_density}\n;BedTemperature:{material_bed_temperature}\n\n;(**** start.gcode for X40 ****)\nM203 Z15\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T{initial_extruder_nr}\nG28 ;This command will use tool0 to get the x endstop and setup coordinate system\nG29 ;Auto level\nM107 P0 ;Turn off fan\nM107 P1\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG1 X-47 F3000\nG1 Z20 F600\nT{initial_extruder_nr} S ;Set start extruder nr after G28\nM109 S{material_print_temperature_layer_0} T{initial_extruder_nr}\nG92 E0\nG1 E22 F300\nG92 E0\nM203 Z2" }, + "machine_width": { "default_value": 300 }, + "material_print_temp_prepend": { "default_value": false }, + "material_standby_temperature": { "value": "max(0, material_print_temperature - 20)" }, + "ooze_shield_angle": { "default_value": 0 }, + "ooze_shield_dist": { "default_value": 3.0 }, + "ooze_shield_enabled": { "default_value": true }, + "retraction_amount": { "default_value": 4 }, + "speed_print": { "value": 60.0 }, + "speed_support": { "value": "round(speed_print * 0.96, 1)" }, + "speed_topbottom": { "value": "round(speed_print * 0.58, 1)" }, + "speed_wall": { "value": "speed_print / 2" }, + "switch_extruder_retraction_amount": { "value": 0 } + } +} \ No newline at end of file diff --git a/resources/extruders/weedo_x40v3_extruder_left.def.json b/resources/extruders/weedo_x40v3_extruder_left.def.json new file mode 100644 index 00000000000..eac3309fc0e --- /dev/null +++ b/resources/extruders/weedo_x40v3_extruder_left.def.json @@ -0,0 +1,21 @@ +{ + "version": 2, + "name": "Extruder Left", + "inherits": "fdmextruder", + "metadata": + { + "machine": "weedo_x40v3", + "position": "0" + }, + "overrides": + { + "extruder_nr": + { + "default_value": 0, + "maximum_value": "1" + }, + "machine_extruder_end_code": { "default_value": "M605 S0 ;Disable auto-park\nG91 ; Relative positioning\nG1 E-8 1680\nG90\nG0 X-49 F3000\n" }, + "machine_extruder_start_code": { "default_value": "G91 ; Relative positioning\nG1 E14 F300\nG1 E-5 F1800\nG90\nG92 E-4.5" }, + "material_diameter": { "default_value": 1.75 } + } +} \ No newline at end of file diff --git a/resources/extruders/weedo_x40v3_extruder_right.def.json b/resources/extruders/weedo_x40v3_extruder_right.def.json new file mode 100644 index 00000000000..ffb8cb5a173 --- /dev/null +++ b/resources/extruders/weedo_x40v3_extruder_right.def.json @@ -0,0 +1,20 @@ +{ + "version": 2, + "name": "Extruder Right", + "inherits": "fdmextruder", + "metadata": { + "machine": "weedo_x40v3", + "position": "1" + }, + + "overrides": { + "extruder_nr": { + "default_value": 1, + "maximum_value": "1" + }, + "material_diameter": { "default_value": 1.75 }, + "machine_extruder_cooling_fan_number": {"default_value": 1}, + "machine_extruder_start_code":{ "default_value": "G91 ; Relative positioning\nG1 E14 F300\nG1 E-5 F1800\nG90\nG92 E-4.5" }, + "machine_extruder_end_code":{"default_value":"M605 S0 ;Disable auto-park\nG91 ; Relative positioning\nG1 E-8 1680\nG90\nG0 X353.7 F3000\n"} + } +}