Cant Slice with tree support selegoo cure 5.6

[Emoxy1]

Cura Version

5.6.0

Operating System

windows 11 intel i7 13700h

Printer

elegoo neptune 4

Name abnormal settings

even with the default profiles i cant slice

Describe model location

i tried every possibility and it doesnt work

Describe your model

just an articulated fishbone i think the model doesnt change anything i cant slice 90% of my prints using tree support

Add your .zip here ⬇️

EN4_Fish_improved_print_in_place.zip

[Asterchades]

There were issues with Tree Supports that were already fixed in 5.7.0, which released nearly six months ago, as mentioned in the release notes. At the very least I would recommend updating to that version, if not all the way to the current 5.8.1 and trying again. Note that if you specifically need 5.6.0 for a given purpose or project that any different minor versions of Cura can coexist without interfering with each other (eg 5.6.0 and 5.8.1 won't interfere, but 5.8.0 and 5.8.1 may).

To that end I'm unable to reproduce your fault in 5.8.0, so I can only assume it was one of those that has long since already been fixed.

You also need to wait for your files to finish uploading before submitting the post. Note how the second link (the image) has "Uploading" before it and the ellipses afterwards - this indicates that the upload was still ongoing, and the link is of no use due to the interruption.