envsetup.sh

# Copyright (C) 2022 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# gettop is duplicated here and in shell_utils.mk, because it's difficult
# to find shell_utils.make without it for all the novel ways this file can be
# sourced.  Other common functions should only be in one place or the other.
function _gettop_once
{
    local TOPFILE=build/make/core/envsetup.mk
    if [ -n "$TOP" -a -f "$TOP/$TOPFILE" ] ; then
        # The following circumlocution ensures we remove symlinks from TOP.
        (cd "$TOP"; PWD= /bin/pwd)
    else
        if [ -f $TOPFILE ] ; then
            # The following circumlocution (repeated below as well) ensures
            # that we record the true directory name and not one that is
            # faked up with symlink names.
            PWD= /bin/pwd
        else
            local HERE=$PWD
            local T=
            while [ \( ! \( -f $TOPFILE \) \) -a \( "$PWD" != "/" \) ]; do
                \cd ..
                T=`PWD= /bin/pwd -P`
            done
            \cd "$HERE"
            if [ -f "$T/$TOPFILE" ]; then
                echo "$T"
            fi
        fi
    fi
}
T=$(_gettop_once)
if [ ! "$T" ]; then
    echo "Couldn't locate the top of the tree. Always source build/envsetup.sh from the root of the tree." >&2
    return 1
fi
IMPORTING_ENVSETUP=true source $T/build/make/shell_utils.sh


# Help
function hmm() {
cat <<EOF

Run "m help" for help with the build system itself.

Invoke ". build/envsetup.sh" from your shell to add the following functions to your environment:
- lunch:      lunch <product_name>-<release_type>-<build_variant>
              Selects <product_name> as the product to build, and <build_variant> as the variant to
              build, and stores those selections in the environment to be read by subsequent
              invocations of 'm' etc.
- tapas:      tapas [<App1> <App2> ...] [arm|x86|arm64|x86_64] [eng|userdebug|user]
              Sets up the build environment for building unbundled apps (APKs).
- banchan:    banchan <module1> [<module2> ...] \\
                      [arm|x86|arm64|riscv64|x86_64|arm64_only|x86_64only] [eng|userdebug|user]
              Sets up the build environment for building unbundled modules (APEXes).
- croot:      Changes directory to the top of the tree, or a subdirectory thereof.
- m:          Makes from the top of the tree.
- mm:         Builds and installs all of the modules in the current directory, and their
              dependencies.
- mmm:        Builds and installs all of the modules in the supplied directories, and their
              dependencies.
              To limit the modules being built use the syntax: mmm dir/:target1,target2.
- mma:        Same as 'mm'
- mmma:       Same as 'mmm'
- provision:  Flash device with all required partitions. Options will be passed on to fastboot.
- cgrep:      Greps on all local C/C++ files.
- ggrep:      Greps on all local Gradle files.
- gogrep:     Greps on all local Go files.
- jgrep:      Greps on all local Java files.
- jsongrep:   Greps on all local Json files.
- ktgrep:     Greps on all local Kotlin files.
- resgrep:    Greps on all local res/*.xml files.
- mangrep:    Greps on all local AndroidManifest.xml files.
- mgrep:      Greps on all local Makefiles and *.bp files.
- owngrep:    Greps on all local OWNERS files.
- rsgrep:     Greps on all local Rust files.
- sepgrep:    Greps on all local sepolicy files.
- sgrep:      Greps on all local source files.
- tomlgrep:   Greps on all local Toml files.
- pygrep:     Greps on all local Python files.
- godir:      Go to the directory containing a file.
- allmod:     List all modules.
- gomod:      Go to the directory containing a module.
- bmod:       Get the Bazel label of a Soong module if it is converted with bp2build.
- pathmod:    Get the directory containing a module.
- outmod:     Gets the location of a module's installed outputs with a certain extension.
- dirmods:    Gets the modules defined in a given directory.
- installmod: Adb installs a module's built APK.
- refreshmod: Refresh list of modules for allmod/gomod/pathmod/outmod/installmod.
- syswrite:   Remount partitions (e.g. system.img) as writable, rebooting if necessary.

EOF

    __print_voltage_functions_help

cat <<EOF

Environment options:
- SANITIZE_HOST: Set to 'address' to use ASAN for all host modules.
- ANDROID_QUIET_BUILD: set to 'true' to display only the essential messages.

Look at the source to view more functions. The complete list is:
EOF
    local T=$(gettop)
    local A=""
    local i
    for i in `cat $T/build/envsetup.sh $T/vendor/voltage/build/envsetup.sh | sed -n "/^[[:blank:]]*function /s/function \([a-z_]*\).*/\1/p" | sort | uniq`; do
      A="$A $i"
    done
    echo $A
}

# Get all the build variables needed by this script in a single call to the build system.
function build_build_var_cache()
{
    local T=$(gettop)
    # Grep out the variable names from the script.
    cached_vars=(`cat $T/build/envsetup.sh $T/vendor/voltage/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/get_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '`)
    cached_abs_vars=(`cat $T/build/envsetup.sh $T/vendor/voltage/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/get_abs_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '`)
    # Call the build system to dump the "<val>=<value>" pairs as a shell script.
    build_dicts_script=`\builtin cd $T; build/soong/soong_ui.bash --dumpvars-mode \
                        --vars="${cached_vars[*]}" \
                        --abs-vars="${cached_abs_vars[*]}" \
                        --var-prefix=var_cache_ \
                        --abs-var-prefix=abs_var_cache_`
    local ret=$?
    if [ $ret -ne 0 ]
    then
        unset build_dicts_script
        return $ret
    fi
    # Execute the script to store the "<val>=<value>" pairs as shell variables.
    eval "$build_dicts_script"
    ret=$?
    unset build_dicts_script
    if [ $ret -ne 0 ]
    then
        return $ret
    fi
    BUILD_VAR_CACHE_READY="true"
}

# Delete the build var cache, so that we can still call into the build system
# to get build variables not listed in this script.
function destroy_build_var_cache()
{
    unset BUILD_VAR_CACHE_READY
    local v
    for v in $cached_vars; do
      unset var_cache_$v
    done
    unset cached_vars
    for v in $cached_abs_vars; do
      unset abs_var_cache_$v
    done
    unset cached_abs_vars
}

# Get the value of a build variable as an absolute path.
function get_abs_build_var()
{
    if [ "$BUILD_VAR_CACHE_READY" = "true" ]
    then
        eval "echo \"\${abs_var_cache_$1}\""
        return
    fi

    local T=$(gettop)
    if [ ! "$T" ]; then
        echo "Couldn't locate the top of the tree.  Try setting TOP." >&2
        return
    fi
    (\cd $T; build/soong/soong_ui.bash --dumpvar-mode --abs $1)
}

# Get the exact value of a build variable.
function get_build_var()
{
    if [ "$BUILD_VAR_CACHE_READY" = "true" ]
    then
        eval "echo \"\${var_cache_$1}\""
        return 0
    fi

    local T=$(gettop)
    if [ ! "$T" ]; then
        echo "Couldn't locate the top of the tree.  Try setting TOP." >&2
        return 1
    fi
    (\cd $T; build/soong/soong_ui.bash --dumpvar-mode $1)
}

# check to see if the supplied product is one we can build
function check_product()
{
    local T=$(gettop)
    if [ ! "$T" ]; then
        echo "Couldn't locate the top of the tree.  Try setting TOP." >&2
        return
    fi
    if (echo -n $1 | grep -q -e "^voltage_") ; then
        VOLTAGE_BUILD=$(echo -n $1 | sed -e 's/^voltage_//g')
    else
        VOLTAGE_BUILD=
    fi
    export VOLTAGE_BUILD

        TARGET_PRODUCT=$1 \
        TARGET_RELEASE= \
        TARGET_BUILD_VARIANT= \
        TARGET_BUILD_TYPE= \
        TARGET_BUILD_APPS= \
        get_build_var TARGET_DEVICE > /dev/null
    # hide successful answers, but allow the errors to show
}

VARIANT_CHOICES=(user userdebug eng)

# check to see if the supplied variant is valid
function check_variant()
{
    local v
    for v in ${VARIANT_CHOICES[@]}
    do
        if [ "$v" = "$1" ]
        then
            return 0
        fi
    done
    return 1
}


# Add directories to PATH that are dependent on the lunch target.
# For directories that are not lunch-specific, add them in set_global_paths
function set_lunch_paths()
{
    local T=$(gettop)
    if [ ! "$T" ]; then
        echo "Couldn't locate the top of the tree.  Try setting TOP."
        return
    fi

    ##################################################################
    #                                                                #
    #              Read me before you modify this code               #
    #                                                                #
    #   This function sets ANDROID_LUNCH_BUILD_PATHS to what it is   #
    #   adding to PATH, and the next time it is run, it removes that #
    #   from PATH.  This is required so lunch can be run more than   #
    #   once and still have working paths.                           #
    #                                                                #
    ##################################################################

    # Note: on windows/cygwin, ANDROID_LUNCH_BUILD_PATHS will contain spaces
    # due to "C:\Program Files" being in the path.

    # Handle compat with the old ANDROID_BUILD_PATHS variable.
    # TODO: Remove this after we think everyone has lunched again.
    if [ -z "$ANDROID_LUNCH_BUILD_PATHS" -a -n "$ANDROID_BUILD_PATHS" ] ; then
      ANDROID_LUNCH_BUILD_PATHS="$ANDROID_BUILD_PATHS"
      ANDROID_BUILD_PATHS=
    fi
    if [ -n "$ANDROID_PRE_BUILD_PATHS" ] ; then
        export PATH=${PATH/$ANDROID_PRE_BUILD_PATHS/}
        # strip leading ':', if any
        export PATH=${PATH/:%/}
        ANDROID_PRE_BUILD_PATHS=
    fi

    # Out with the old...
    if [ -n "$ANDROID_LUNCH_BUILD_PATHS" ] ; then
        export PATH=${PATH/$ANDROID_LUNCH_BUILD_PATHS/}
    fi

    # And in with the new...
    ANDROID_LUNCH_BUILD_PATHS=$(get_abs_build_var SOONG_HOST_OUT_EXECUTABLES)
    ANDROID_LUNCH_BUILD_PATHS+=:$(get_abs_build_var HOST_OUT_EXECUTABLES)

    # Append llvm binutils prebuilts path to ANDROID_LUNCH_BUILD_PATHS.
    local ANDROID_LLVM_BINUTILS=$(get_abs_build_var ANDROID_CLANG_PREBUILTS)/llvm-binutils-stable
    ANDROID_LUNCH_BUILD_PATHS+=:$ANDROID_LLVM_BINUTILS

    # Set up ASAN_SYMBOLIZER_PATH for SANITIZE_HOST=address builds.
    export ASAN_SYMBOLIZER_PATH=$ANDROID_LLVM_BINUTILS/llvm-symbolizer

    # Append asuite prebuilts path to ANDROID_LUNCH_BUILD_PATHS.
    local os_arch=$(get_build_var HOST_PREBUILT_TAG)
    ANDROID_LUNCH_BUILD_PATHS+=:$T/prebuilts/asuite/acloud/$os_arch
    ANDROID_LUNCH_BUILD_PATHS+=:$T/prebuilts/asuite/aidegen/$os_arch
    ANDROID_LUNCH_BUILD_PATHS+=:$T/prebuilts/asuite/atest/$os_arch

    export ANDROID_JAVA_HOME=$(get_abs_build_var ANDROID_JAVA_HOME)
    export JAVA_HOME=$ANDROID_JAVA_HOME
    export ANDROID_JAVA_TOOLCHAIN=$(get_abs_build_var ANDROID_JAVA_TOOLCHAIN)
    ANDROID_LUNCH_BUILD_PATHS+=:$ANDROID_JAVA_TOOLCHAIN

    # Fix up PYTHONPATH
    if [ -n $ANDROID_PYTHONPATH ]; then
        export PYTHONPATH=${PYTHONPATH//$ANDROID_PYTHONPATH/}
    fi
    # //development/python-packages contains both a pseudo-PYTHONPATH which
    # mimics an already assembled venv, but also contains real Python packages
    # that are not in that layout until they are installed. We can fake it for
    # the latter type by adding the package source directories to the PYTHONPATH
    # directly. For the former group, we only need to add the python-packages
    # directory itself.
    #
    # This could be cleaned up by converting the remaining packages that are in
    # the first category into a typical python source layout (that is, another
    # layer of directory nesting) and automatically adding all subdirectories of
    # python-packages to the PYTHONPATH instead of manually curating this. We
    # can't convert the packages like adb to the other style because doing so
    # would prevent exporting type info from those packages.
    #
    # http://b/266688086
    export ANDROID_PYTHONPATH=$T/development/python-packages/adb:$T/development/python-packages/gdbrunner:$T/development/python-packages:
    if [ -n $VENDOR_PYTHONPATH ]; then
        ANDROID_PYTHONPATH=$ANDROID_PYTHONPATH$VENDOR_PYTHONPATH
    fi
    export PYTHONPATH=$ANDROID_PYTHONPATH$PYTHONPATH

    unset ANDROID_PRODUCT_OUT
    export ANDROID_PRODUCT_OUT=$(get_abs_build_var PRODUCT_OUT)
    export OUT=$ANDROID_PRODUCT_OUT

    unset ANDROID_HOST_OUT
    export ANDROID_HOST_OUT=$(get_abs_build_var HOST_OUT)

    unset ANDROID_SOONG_HOST_OUT
    export ANDROID_SOONG_HOST_OUT=$(get_abs_build_var SOONG_HOST_OUT)

    unset ANDROID_HOST_OUT_TESTCASES
    export ANDROID_HOST_OUT_TESTCASES=$(get_abs_build_var HOST_OUT_TESTCASES)

    unset ANDROID_TARGET_OUT_TESTCASES
    export ANDROID_TARGET_OUT_TESTCASES=$(get_abs_build_var TARGET_OUT_TESTCASES)

    # Finally, set PATH
    export PATH=$ANDROID_LUNCH_BUILD_PATHS:$PATH
}

# Add directories to PATH that are NOT dependent on the lunch target.
# For directories that are lunch-specific, add them in set_lunch_paths
function set_global_paths()
{
    local T=$(gettop)
    if [ ! "$T" ]; then
        echo "Couldn't locate the top of the tree.  Try setting TOP."
        return
    fi

    ##################################################################
    #                                                                #
    #              Read me before you modify this code               #
    #                                                                #
    #   This function sets ANDROID_GLOBAL_BUILD_PATHS to what it is  #
    #   adding to PATH, and the next time it is run, it removes that #
    #   from PATH.  This is required so envsetup.sh can be sourced   #
    #   more than once and still have working paths.                 #
    #                                                                #
    ##################################################################

    # Out with the old...
    if [ -n "$ANDROID_GLOBAL_BUILD_PATHS" ] ; then
        export PATH=${PATH/$ANDROID_GLOBAL_BUILD_PATHS/}
    fi

    # And in with the new...
    ANDROID_GLOBAL_BUILD_PATHS=$T/build/soong/bin
    ANDROID_GLOBAL_BUILD_PATHS+=:$T/build/bazel/bin
    ANDROID_GLOBAL_BUILD_PATHS+=:$T/development/scripts
    ANDROID_GLOBAL_BUILD_PATHS+=:$T/prebuilts/devtools/tools

    # add kernel specific binaries
    if [ $(uname -s) = Linux ] ; then
        ANDROID_GLOBAL_BUILD_PATHS+=:$T/prebuilts/misc/linux-x86/dtc
        ANDROID_GLOBAL_BUILD_PATHS+=:$T/prebuilts/misc/linux-x86/libufdt
    fi

    # If prebuilts/android-emulator/<system>/ exists, prepend it to our PATH
    # to ensure that the corresponding 'emulator' binaries are used.
    case $(uname -s) in
        Darwin)
            ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/darwin-x86_64
            ;;
        Linux)
            ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/linux-x86_64
            ;;
        *)
            ANDROID_EMULATOR_PREBUILTS=
            ;;
    esac
    if [ -n "$ANDROID_EMULATOR_PREBUILTS" -a -d "$ANDROID_EMULATOR_PREBUILTS" ]; then
        ANDROID_GLOBAL_BUILD_PATHS+=:$ANDROID_EMULATOR_PREBUILTS
        export ANDROID_EMULATOR_PREBUILTS
    fi

    # Finally, set PATH
    export PATH=$ANDROID_GLOBAL_BUILD_PATHS:$PATH
}

function printconfig()
{
    local T=$(gettop)
    if [ ! "$T" ]; then
        echo "Couldn't locate the top of the tree.  Try setting TOP." >&2
        return
    fi
    get_build_var report_config
}

function set_stuff_for_environment()
{
    set_lunch_paths
    set_sequence_number

}

function set_sequence_number()
{
    export BUILD_ENV_SEQUENCE_NUMBER=13
}

# Takes a command name, and check if it's in ENVSETUP_NO_COMPLETION or not.
function should_add_completion() {
    local cmd="$(basename $1| sed 's/_completion//' |sed 's/\.\(.*\)*sh$//')"
    case :"$ENVSETUP_NO_COMPLETION": in
        *:"$cmd":*)
            return 1
            ;;
    esac
    return 0
}

function addcompletions()
{
    local f=

    # Keep us from trying to run in something that's neither bash nor zsh.
    if [ -z "$BASH_VERSION" -a -z "$ZSH_VERSION" ]; then
        return
    fi

    # Keep us from trying to run in bash that's too old.
    if [ -n "$BASH_VERSION" -a ${BASH_VERSINFO[0]} -lt 3 ]; then
        return
    fi

    local completion_files=(
      packages/modules/adb/adb.bash
      system/core/fastboot/fastboot.bash
      tools/asuite/asuite.sh
      prebuilts/bazel/common/bazel-complete.bash
    )
    # Completion can be disabled selectively to allow users to use non-standard completion.
    # e.g.
    # ENVSETUP_NO_COMPLETION=adb # -> disable adb completion
    # ENVSETUP_NO_COMPLETION=adb:bit # -> disable adb and bit completion
    local T=$(gettop)
    for f in ${completion_files[*]}; do
        f="$T/$f"
        if [ ! -f "$f" ]; then
          echo "Warning: completion file $f not found"
        elif should_add_completion "$f"; then
            . $f
        fi
    done

    if should_add_completion bit ; then
        complete -C "bit --tab" bit
    fi
    if [ -z "$ZSH_VERSION" ]; then
        # Doesn't work in zsh.
        complete -o nospace -F _croot croot
        # TODO(b/244559459): Support b autocompletion for zsh
        complete -F _bazel__complete -o nospace b
    fi
    complete -F _lunch lunch

    complete -F _complete_android_module_names pathmod
    complete -F _complete_android_module_names gomod
    complete -F _complete_android_module_names outmod
    complete -F _complete_android_module_names installmod
    complete -F _complete_android_module_names bmod
    complete -F _complete_android_module_names m
}

function multitree_lunch_help()
{
    echo "usage: lunch PRODUCT-RELEASE-VARIANT" 1>&2
    echo "    Set up android build environment based on a product short name and variant" 1>&2
    echo 1>&2
    echo "lunch COMBO_FILE VARIANT" 1>&2
    echo "    Set up android build environment based on a specific lunch combo file" 1>&2
    echo "    and variant." 1>&2
    echo 1>&2
    echo "lunch --print [CONFIG]" 1>&2
    echo "    Print the contents of a configuration.  If CONFIG is supplied, that config" 1>&2
    echo "    will be flattened and printed.  If CONFIG is not supplied, the currently" 1>&2
    echo "    selected config will be printed.  Returns 0 on success or nonzero on error." 1>&2
    echo 1>&2
    echo "lunch --list" 1>&2
    echo "    List all possible combo files available in the current tree" 1>&2
    echo 1>&2
    echo "lunch --help" 1>&2
    echo "lunch -h" 1>&2
    echo "    Prints this message." 1>&2
}

function multitree_lunch()
{
    local code
    local results
    # Lunch must be run in the topdir, but this way we get a clear error
    # message, instead of FileNotFound.
    local T=$(multitree_gettop)
    if [ -z "$T" ]; then
      _multitree_lunch_error
      return 1
    fi
    if $(echo "$1" | grep -q '^-') ; then
        # Calls starting with a -- argument are passed directly and the function
        # returns with the lunch.py exit code.
        "${T}/orchestrator/build/orchestrator/core/lunch.py" "$@"
        code=$?
        if [[ $code -eq 2 ]] ; then
          echo 1>&2
          multitree_lunch_help
          return $code
        elif [[ $code -ne 0 ]] ; then
          return $code
        fi
    else
        # All other calls go through the --lunch variant of lunch.py
        results=($(${T}/orchestrator/build/orchestrator/core/lunch.py --lunch "$@"))
        code=$?
        if [[ $code -eq 2 ]] ; then
          echo 1>&2
          multitree_lunch_help
          return $code
        elif [[ $code -ne 0 ]] ; then
          return $code
        fi

        export TARGET_BUILD_COMBO=${results[0]}
        export TARGET_BUILD_VARIANT=${results[1]}
    fi
}

function choosetype()
{
    echo "Build type choices are:"
    echo "     1. release"
    echo "     2. debug"
    echo

    local DEFAULT_NUM DEFAULT_VALUE
    DEFAULT_NUM=1
    DEFAULT_VALUE=release

    export TARGET_BUILD_TYPE=
    local ANSWER
    while [ -z $TARGET_BUILD_TYPE ]
    do
        echo -n "Which would you like? ["$DEFAULT_NUM"] "
        if [ -z "$1" ] ; then
            read ANSWER
        else
            echo $1
            ANSWER=$1
        fi
        case $ANSWER in
        "")
            export TARGET_BUILD_TYPE=$DEFAULT_VALUE
            ;;
        1)
            export TARGET_BUILD_TYPE=release
            ;;
        release)
            export TARGET_BUILD_TYPE=release
            ;;
        2)
            export TARGET_BUILD_TYPE=debug
            ;;
        debug)
            export TARGET_BUILD_TYPE=debug
            ;;
        *)
            echo
            echo "I didn't understand your response.  Please try again."
            echo
            ;;
        esac
        if [ -n "$1" ] ; then
            break
        fi
    done

    build_build_var_cache
    set_stuff_for_environment
    destroy_build_var_cache
}

#
# This function isn't really right:  It chooses a TARGET_PRODUCT
# based on the list of boards.  Usually, that gets you something
# that kinda works with a generic product, but really, you should
# pick a product by name.
#
function chooseproduct()
{
    local default_value
    if [ "x$TARGET_PRODUCT" != x ] ; then
        default_value=$TARGET_PRODUCT
    else
        default_value=aosp_arm
    fi

    export TARGET_BUILD_APPS=
    export TARGET_PRODUCT=
    local ANSWER
    while [ -z "$TARGET_PRODUCT" ]
    do
        echo -n "Which product would you like? [$default_value] "
        if [ -z "$1" ] ; then
            read ANSWER
        else
            echo $1
            ANSWER=$1
        fi

        if [ -z "$ANSWER" ] ; then
            export TARGET_PRODUCT=$default_value
        else
            if check_product $ANSWER
            then
                export TARGET_PRODUCT=$ANSWER
            else
                echo "** Not a valid product: $ANSWER"
            fi
        fi
        if [ -n "$1" ] ; then
            break
        fi
    done

    build_build_var_cache
    set_stuff_for_environment
    destroy_build_var_cache
}

function choosevariant()
{
    echo "Variant choices are:"
    local index=1
    local v
    for v in ${VARIANT_CHOICES[@]}
    do
        # The product name is the name of the directory containing
        # the makefile we found, above.
        echo "     $index. $v"
        index=$(($index+1))
    done

    local default_value=eng
    local ANSWER

    export TARGET_BUILD_VARIANT=
    while [ -z "$TARGET_BUILD_VARIANT" ]
    do
        echo -n "Which would you like? [$default_value] "
        if [ -z "$1" ] ; then
            read ANSWER
        else
            echo $1
            ANSWER=$1
        fi

        if [ -z "$ANSWER" ] ; then
            export TARGET_BUILD_VARIANT=$default_value
        elif (echo -n $ANSWER | grep -q -e "^[0-9][0-9]*$") ; then
            if [ "$ANSWER" -le "${#VARIANT_CHOICES[@]}" ] ; then
                export TARGET_BUILD_VARIANT=${VARIANT_CHOICES[@]:$(($ANSWER-1)):1}
            fi
        else
            if check_variant $ANSWER
            then
                export TARGET_BUILD_VARIANT=$ANSWER
            else
                echo "** Not a valid variant: $ANSWER"
            fi
        fi
        if [ -n "$1" ] ; then
            break
        fi
    done
}

function choosecombo()
{
    choosetype $1

    echo
    echo
    chooseproduct $2

    echo
    echo
    choosevariant $3

    echo
    build_build_var_cache
    set_stuff_for_environment
    printconfig
    destroy_build_var_cache
}

function add_lunch_combo()
{
    if [ -n "$ZSH_VERSION" ]; then
        echo -n "${funcfiletrace[1]}: "
    else
        echo -n "${BASH_SOURCE[1]}:${BASH_LINENO[0]}: "
    fi
    echo "add_lunch_combo is obsolete. Use COMMON_LUNCH_CHOICES in your AndroidProducts.mk instead."
}

function print_lunch_menu()
{
    local uname=$(uname)
    local choices
    choices=$(TARGET_BUILD_APPS= TARGET_PRODUCT= TARGET_RELEASE= TARGET_BUILD_VARIANT= get_build_var COMMON_LUNCH_CHOICES 2>/dev/null)
    local ret=$?

    echo
    echo "You're building on" $uname
    echo

    if [ $ret -ne 0 ]
    then
        echo "Warning: Cannot display lunch menu."
        echo
        echo "Note: You can invoke lunch with an explicit target:"
        echo
        echo "  usage: lunch [target]" >&2
        echo
        return
    fi

    echo "Lunch menu .. Here are the common combinations:"

    local i=1
    local choice
    for choice in $(echo $choices)
    do
        echo "     $i. $choice"
        i=$(($i+1))
    done

    echo
}

function lunch()
{
    local answer

    if [[ $# -gt 1 ]]; then
        echo "usage: lunch [target]" >&2
        return 1
    fi

    local used_lunch_menu=0

    if [ "$1" ]; then
        answer=$1
    else
        print_lunch_menu
        echo "Which would you like? [aosp_cf_x86_64_phone-trunk_staging-eng]"
        echo -n "Pick from common choices above (e.g. 13) or specify your own (e.g. aosp_barbet-trunk_staging-eng): "
        read answer
        used_lunch_menu=1
    fi

    local selection=

    if [ -z "$answer" ]
    then
        selection=aosp_cf_x86_64_phone-trunk_staging-eng
    elif (echo -n $answer | grep -q -e "^[0-9][0-9]*$")
    then
        local choices=($(TARGET_BUILD_APPS= TARGET_PRODUCT= TARGET_RELEASE= TARGET_BUILD_VARIANT= get_build_var COMMON_LUNCH_CHOICES 2>/dev/null))
        if [ $answer -le ${#choices[@]} ]
        then
            # array in zsh starts from 1 instead of 0.
            if [ -n "$ZSH_VERSION" ]
            then
                selection=${choices[$(($answer))]}
            else
                selection=${choices[$(($answer-1))]}
            fi
        fi
    else
        selection=$answer
    fi

    export TARGET_BUILD_APPS=

    # This must be <product>-<release>-<variant>
    local product release variant
    # Split string on the '-' character.
    IFS="-" read -r product release variant <<< "$selection"

    if [[ -z "$product" ]] || [[ -z "$release" ]] || [[ -z "$variant" ]]
    then
        echo
        echo "Invalid lunch combo: $selection"
        echo "Valid combos must be of the form <product>-<release>-<variant>"
        return 1
    fi

    if ! check_product $product
    then
        # if we can't find a product, try to grab it off the VoltageOS-Devices GitHub
        T=$(gettop)
        cd $T > /dev/null
        vendor/voltage/build/tools/roomservice.py $product
        cd - > /dev/null
        check_product $product
    else
        T=$(gettop)
        cd $T > /dev/null
        vendor/voltage/build/tools/roomservice.py $product true
        cd - > /dev/null
    fi

    TARGET_PRODUCT=$product \
    TARGET_BUILD_VARIANT=$variant \
    TARGET_RELEASE=$release \
    build_build_var_cache
    if [ $? -ne 0 ]
    then
        if [[ "$product" =~ .*_(eng|user|userdebug) ]]
        then
            echo "Did you mean -${product/*_/}? (dash instead of underscore)"
        fi
        echo
        echo "** Don't have a product spec for: '$product'"
        echo "** Do you have the right repo manifest?"
        product=
    fi

    if [ -z "$product" -o -z "$variant" ]
    then
        echo
        return 1
    fi
    export TARGET_PRODUCT=$(get_build_var TARGET_PRODUCT)
    export TARGET_BUILD_VARIANT=$(get_build_var TARGET_BUILD_VARIANT)
    export TARGET_RELEASE=$release
    # Note this is the string "release", not the value of the variable.
    export TARGET_BUILD_TYPE=release

    local prebuilt_kernel=$(get_build_var TARGET_PREBUILT_KERNEL)
    if [ -z "$prebuilt_kernel" ]; then
      export INLINE_KERNEL_BUILDING=true
    else
      unset INLINE_KERNEL_BUILDING
    fi

    [[ -n "${ANDROID_QUIET_BUILD:-}" ]] || echo

    fixup_common_out_dir

    set_stuff_for_environment
    [[ -n "${ANDROID_QUIET_BUILD:-}" ]] || printconfig

    if [ $used_lunch_menu -eq 1 ]; then
      echo
      echo "Hint: next time you can simply run 'lunch $selection'"
    fi

    destroy_build_var_cache

    if [[ -n "${CHECK_MU_CONFIG:-}" ]]; then
      check_mu_config
    fi
}

unset COMMON_LUNCH_CHOICES_CACHE
# Tab completion for lunch.
function _lunch()
{
    local cur prev opts
    COMPREPLY=()
    cur="${COMP_WORDS[COMP_CWORD]}"
    prev="${COMP_WORDS[COMP_CWORD-1]}"

    if [ -z "$COMMON_LUNCH_CHOICES_CACHE" ]; then
        COMMON_LUNCH_CHOICES_CACHE=$(TARGET_BUILD_APPS= get_build_var COMMON_LUNCH_CHOICES)
    fi

    COMPREPLY=( $(compgen -W "${COMMON_LUNCH_CHOICES_CACHE}" -- ${cur}) )
    return 0
}

# Configures the build to build unbundled apps.
# Run tapas with one or more app names (from LOCAL_PACKAGE_NAME)
function tapas()
{
    local showHelp="$(echo $* | xargs -n 1 echo | \grep -E '^(help)$' | xargs)"
    local arch="$(echo $* | xargs -n 1 echo | \grep -E '^(arm|x86|arm64|x86_64)$' | xargs)"
    # TODO(b/307975293): Expand tapas to take release arguments (and update hmm() usage).
    local release="trunk_staging"
    local variant="$(echo $* | xargs -n 1 echo | \grep -E '^(user|userdebug|eng)$' | xargs)"
    local density="$(echo $* | xargs -n 1 echo | \grep -E '^(ldpi|mdpi|tvdpi|hdpi|xhdpi|xxhdpi|xxxhdpi|alldpi)$' | xargs)"
    local keys="$(echo $* | xargs -n 1 echo | \grep -E '^(devkeys)$' | xargs)"
    local apps="$(echo $* | xargs -n 1 echo | \grep -E -v '^(user|userdebug|eng|arm|x86|arm64|x86_64|ldpi|mdpi|tvdpi|hdpi|xhdpi|xxhdpi|xxxhdpi|alldpi|devkeys)$' | xargs)"


    if [ "$showHelp" != "" ]; then
      $(gettop)/build/make/tapasHelp.sh
      return
    fi

    if [ $(echo $arch | wc -w) -gt 1 ]; then
        echo "tapas: Error: Multiple build archs supplied: $arch"
        return
    fi
    if [ $(echo $release | wc -w) -gt 1 ]; then
        echo "tapas: Error: Multiple build releases supplied: $release"
        return
    fi
    if [ $(echo $variant | wc -w) -gt 1 ]; then
        echo "tapas: Error: Multiple build variants supplied: $variant"
        return
    fi
    if [ $(echo $density | wc -w) -gt 1 ]; then
        echo "tapas: Error: Multiple densities supplied: $density"
        return
    fi
    if [ $(echo $keys | wc -w) -gt 1 ]; then
        echo "tapas: Error: Multiple keys supplied: $keys"
        return
    fi

    local product=aosp_arm
    case $arch in
      x86)    product=aosp_x86;;
      arm64)  product=aosp_arm64;;
      x86_64) product=aosp_x86_64;;
    esac
    if [ -n "$keys" ]; then
        product=${product/aosp_/aosp_${keys}_}
    fi;

    if [ -z "$variant" ]; then
        variant=eng
    fi
    if [ -z "$apps" ]; then
        apps=all
    fi
    if [ -z "$density" ]; then
        density=alldpi
    fi

    export TARGET_PRODUCT=$product
    export TARGET_RELEASE=$release
    export TARGET_BUILD_VARIANT=$variant
    export TARGET_BUILD_DENSITY=$density
    export TARGET_BUILD_TYPE=release
    export TARGET_BUILD_APPS=$apps

    build_build_var_cache
    set_stuff_for_environment
    printconfig
    destroy_build_var_cache
}

# Configures the build to build unbundled Android modules (APEXes).
# Run banchan with one or more module names (from apex{} modules).
function banchan()
{
    local showHelp="$(echo $* | xargs -n 1 echo | \grep -E '^(help)$' | xargs)"
    local product="$(echo $* | xargs -n 1 echo | \grep -E '^(.*_)?(arm|x86|arm64|riscv64|x86_64|arm64only|x86_64only)$' | xargs)"
    # TODO: Expand banchan to take release arguments (and update hmm() usage).
    local release="trunk_staging"
    local variant="$(echo $* | xargs -n 1 echo | \grep -E '^(user|userdebug|eng)$' | xargs)"
    local apps="$(echo $* | xargs -n 1 echo | \grep -E -v '^(user|userdebug|eng|(.*_)?(arm|x86|arm64|riscv64|x86_64))$' | xargs)"

    if [ "$showHelp" != "" ]; then
      $(gettop)/build/make/banchanHelp.sh
      return
    fi

    if [ -z "$product" ]; then
        product=arm64
    elif [ $(echo $product | wc -w) -gt 1 ]; then
        echo "banchan: Error: Multiple build archs or products supplied: $products"
        return
    fi
    if [ $(echo $release | wc -w) -gt 1 ]; then
        echo "banchan: Error: Multiple build releases supplied: $release"
        return
    fi
    if [ $(echo $variant | wc -w) -gt 1 ]; then
        echo "banchan: Error: Multiple build variants supplied: $variant"
        return
    fi
    if [ -z "$apps" ]; then
        echo "banchan: Error: No modules supplied"
        return
    fi

    case $product in
      arm)    product=module_arm;;
      x86)    product=module_x86;;
      arm64)  product=module_arm64;;
      riscv64) product=module_riscv64;;
      x86_64) product=module_x86_64;;
      arm64only)  product=module_arm64only;;
      x86_64only) product=module_x86_64only;;
    esac
    if [ -z "$variant" ]; then
        variant=eng
    fi

    export TARGET_PRODUCT=$product
    export TARGET_RELEASE=$release
    export TARGET_BUILD_VARIANT=$variant
    export TARGET_BUILD_DENSITY=alldpi
    export TARGET_BUILD_TYPE=release

    # This setup currently uses TARGET_BUILD_APPS just like tapas, but the use
    # case is different and it may diverge in the future.
    export TARGET_BUILD_APPS=$apps

    build_build_var_cache
    set_stuff_for_environment
    printconfig
    destroy_build_var_cache
}

# TODO: Merge into gettop as part of launching multitree
function multitree_gettop
{
    local TOPFILE=orchestrator/build/make/core/envsetup.mk
    if [ -n "$TOP" -a -f "$TOP/$TOPFILE" ] ; then
        # The following circumlocution ensures we remove symlinks from TOP.
        (cd "$TOP"; PWD= /bin/pwd)
    else
        if [ -f $TOPFILE ] ; then
            # The following circumlocution (repeated below as well) ensures
            # that we record the true directory name and not one that is
            # faked up with symlink names.
            PWD= /bin/pwd
        else
            local HERE=$PWD
            local T=
            while [ \( ! \( -f $TOPFILE \) \) -a \( "$PWD" != "/" \) ]; do
                \cd ..
                T=`PWD= /bin/pwd -P`
            done
            \cd "$HERE"
            if [ -f "$T/$TOPFILE" ]; then
                echo "$T"
            fi
        fi
    fi
}

function croot()
{
    local T=$(gettop)
    if [ "$T" ]; then
        if [ "$1" ]; then
            \cd $(gettop)/$1
        else
            \cd $(gettop)
        fi
    else
        echo "Couldn't locate the top of the tree.  Try setting TOP."
    fi
}

function _croot()
{
    local T=$(gettop)
    if [ "$T" ]; then
        local cur="${COMP_WORDS[COMP_CWORD]}"
        k=0
        for c in $(compgen -d ${T}/${cur}); do
            COMPREPLY[k++]=${c#${T}/}/
        done
    fi
}

function cproj()
{
    local TOPFILE=build/make/core/envsetup.mk
    local HERE=$PWD
    local T=
    while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do
        T=$PWD
        if [ -f "$T/Android.mk" ]; then
            \cd $T
            return
        fi
        \cd ..
    done
    \cd $HERE
    echo "can't find Android.mk"
}

function adb() {
   command adb "${@}"
}

# simplified version of ps; output in the form
# <pid> <procname>
function qpid() {
    local prepend=''
    local append=''
    if [ "$1" = "--exact" ]; then
        prepend=' '
        append='$'
        shift
    elif [ "$1" = "--help" -o "$1" = "-h" ]; then
        echo "usage: qpid [[--exact] <process name|pid>"
        return 255
    fi

    local EXE="$1"
    if [ "$EXE" ] ; then
        qpid | \grep "$prepend$EXE$append"
    else
        adb shell ps \
            | tr -d '\r' \
            | sed -e 1d -e 's/^[^ ]* *\([0-9]*\).* \([^ ]*\)$/\1 \2/'
    fi
}

# syswrite - disable verity, reboot if needed, and remount image
#
# Easy way to make system.img/etc writable
function syswrite() {
  adb wait-for-device && adb root && adb wait-for-device || return 1
  if [[ $(adb disable-verity | grep -i "reboot") ]]; then
      echo "rebooting"
      adb reboot && adb wait-for-device && adb root && adb wait-for-device || return 1
  fi
  adb remount || return 1
}

# coredump_setup - enable core dumps globally for any process
#                  that has the core-file-size limit set correctly
#
# NOTE: You must call also coredump_enable for a specific process
#       if its core-file-size limit is not set already.
# NOTE: Core dumps are written to ramdisk; they will not survive a reboot!

function coredump_setup()
{
    echo "Getting root...";
    adb root;
    adb wait-for-device;

    echo "Remounting root partition read-write...";
    adb shell mount -w -o remount -t rootfs rootfs;
    sleep 1;
    adb wait-for-device;
    adb shell mkdir -p /cores;
    adb shell mount -t tmpfs tmpfs /cores;
    adb shell chmod 0777 /cores;

    echo "Granting SELinux permission to dump in /cores...";
    adb shell restorecon -R /cores;

    echo "Set core pattern.";
    adb shell 'echo /cores/core.%p > /proc/sys/kernel/core_pattern';

    echo "Done."
}

# coredump_enable - enable core dumps for the specified process
# $1 = PID of process (e.g., $(pid mediaserver))
#
# NOTE: coredump_setup must have been called as well for a core
#       dump to actually be generated.

function coredump_enable()
{
    local PID=$1;
    if [ -z "$PID" ]; then
        printf "Expecting a PID!\n";
        return;
    fi;
    echo "Setting core limit for $PID to infinite...";
    adb shell /system/bin/ulimit -P $PID -c unlimited
}

# core - send SIGV and pull the core for process
# $1 = PID of process (e.g., $(pid mediaserver))
#
# NOTE: coredump_setup must be called once per boot for core dumps to be
#       enabled globally.

function core()
{
    local PID=$1;

    if [ -z "$PID" ]; then
        printf "Expecting a PID!\n";
        return;
    fi;

    local CORENAME=core.$PID;
    local COREPATH=/cores/$CORENAME;
    local SIG=SEGV;

    coredump_enable $1;

    local done=0;
    while [ $(adb shell "[ -d /proc/$PID ] && echo -n yes") ]; do
        printf "\tSending SIG%s to %d...\n" $SIG $PID;
        adb shell kill -$SIG $PID;
        sleep 1;
    done;

    adb shell "while [ ! -f $COREPATH ] ; do echo waiting for $COREPATH to be generated; sleep 1; done"
    echo "Done: core is under $COREPATH on device.";
}

# systemstack - dump the current stack trace of all threads in the system process
# to the usual ANR traces file
function systemstack()
{
    stacks system_server
}

# Read the ELF header from /proc/$PID/exe to determine if the process is
# 64-bit.
function is64bit()
{
    local PID="$1"
    if [ "$PID" ] ; then
        if [[ "$(adb shell cat /proc/$PID/exe | xxd -l 1 -s 4 -p)" -eq "02" ]] ; then
            echo "64"
        else
            echo ""
        fi
    else
        echo ""
    fi
}

case `uname -s` in
    Darwin)
        function sgrep()
        {
            find -E . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.(c|h|cc|cpp|hpp|S|java|kt|xml|sh|mk|aidl|vts|proto|rs|go)' \
                -exec grep --color -n "$@" {} +
        }

        ;;
    *)
        function sgrep()
        {
            find . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.\(c\|h\|cc\|cpp\|hpp\|S\|java\|kt\|xml\|sh\|mk\|aidl\|vts\|proto\|rs\|go\)' \
                -exec grep --color -n "$@" {} +
        }
        ;;
esac

function gettargetarch
{
    get_build_var TARGET_ARCH
}

function ggrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.gradle" \
        -exec grep --color -n "$@" {} +
}

function gogrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.go" \
        -exec grep --color -n "$@" {} +
}

function jgrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.java" \
        -exec grep --color -n "$@" {} +
}

function rsgrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.rs" \
        -exec grep --color -n "$@" {} +
}

function jsongrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.json" \
        -exec grep --color -n "$@" {} +
}

function tomlgrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.toml" \
        -exec grep --color -n "$@" {} +
}

function ktgrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.kt" \
        -exec grep --color -n "$@" {} +
}

function cgrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f \( -name '*.c' -o -name '*.cc' -o -name '*.cpp' -o -name '*.h' -o -name '*.hpp' \) \
        -exec grep --color -n "$@" {} +
}

function resgrep()
{
    local dir
    for dir in `find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -name res -type d`; do
        find $dir -type f -name '*\.xml' -exec grep --color -n "$@" {} +
    done
}

function mangrep()
{
    find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -name 'AndroidManifest.xml' \
        -exec grep --color -n "$@" {} +
}

function owngrep()
{
    find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -name 'OWNERS' \
        -exec grep --color -n "$@" {} +
}

function sepgrep()
{
    find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -name sepolicy -type d \
        -exec grep --color -n -r --exclude-dir=\.git "$@" {} +
}

function rcgrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.rc*" \
        -exec grep --color -n "$@" {} +
}

function pygrep()
{
    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.py" \
        -exec grep --color -n "$@" {} +
}

case `uname -s` in
    Darwin)
        function mgrep()
        {
            find -E . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o \( -iregex '.*/(Makefile|Makefile\..*|.*\.make|.*\.mak|.*\.mk|.*\.bp)' -o -regex '(.*/)?(build|soong)/.*[^/]*\.go' \) -type f \
                -exec grep --color -n "$@" {} +
        }

        function treegrep()
        {
            find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cpp|hpp|S|java|kt|xml)' \
                -exec grep --color -n -i "$@" {} +
        }

        ;;
    *)
        function mgrep()
        {
            find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o \( -regextype posix-egrep -iregex '(.*\/Makefile|.*\/Makefile\..*|.*\.make|.*\.mak|.*\.mk|.*\.bp)' -o -regextype posix-extended -regex '(.*/)?(build|soong)/.*[^/]*\.go' \) -type f \
                -exec grep --color -n "$@" {} +
        }

        function treegrep()
        {
            find . -name .repo -prune -o -name .git -prune -o -regextype posix-egrep -iregex '.*\.(c|h|cpp|hpp|S|java|kt|xml)' -type f \
                -exec grep --color -n -i "$@" {} +
        }

        ;;
esac

function getprebuilt
{
    get_abs_build_var ANDROID_PREBUILTS
}

# communicate with a running device or emulator, set up necessary state,
# and run the hat command.
function runhat()
{
    # process standard adb options
    local adbTarget=""
    if [ "$1" = "-d" -o "$1" = "-e" ]; then
        adbTarget=$1
        shift 1
    elif [ "$1" = "-s" ]; then
        adbTarget="$1 $2"
        shift 2
    fi
    local adbOptions=${adbTarget}
    #echo adbOptions = ${adbOptions}

    # runhat options
    local targetPid=$1

    if [ "$targetPid" = "" ]; then
        echo "Usage: runhat [ -d | -e | -s serial ] target-pid"
        return
    fi

    # confirm hat is available
    if [ -z $(which hat) ]; then
        echo "hat is not available in this configuration."
        return
    fi

    # issue "am" command to cause the hprof dump
    local devFile=/data/local/tmp/hprof-$targetPid
    echo "Poking $targetPid and waiting for data..."
    echo "Storing data at $devFile"
    adb ${adbOptions} shell am dumpheap $targetPid $devFile
    echo "Press enter when logcat shows \"hprof: heap dump completed\""
    echo -n "> "
    read

    local localFile=/tmp/$$-hprof

    echo "Retrieving file $devFile..."
    adb ${adbOptions} pull $devFile $localFile

    adb ${adbOptions} shell rm $devFile

    echo "Running hat on $localFile"
    echo "View the output by pointing your browser at http://localhost:7000/"
    echo ""
    hat -JXmx512m $localFile
}

function getbugreports()
{
    local reports=(`adb shell ls /sdcard/bugreports | tr -d '\r'`)

    if [ ! "$reports" ]; then
        echo "Could not locate any bugreports."
        return
    fi

    local report
    for report in ${reports[@]}
    do
        echo "/sdcard/bugreports/${report}"
        adb pull /sdcard/bugreports/${report} ${report}
        gunzip ${report}
    done
}

function getsdcardpath()
{
    adb ${adbOptions} shell echo -n \$\{EXTERNAL_STORAGE\}
}

function getscreenshotpath()
{
    echo "$(getsdcardpath)/Pictures/Screenshots"
}

function getlastscreenshot()
{
    local screenshot_path=$(getscreenshotpath)
    local screenshot=`adb ${adbOptions} ls ${screenshot_path} | grep Screenshot_[0-9-]*.*\.png | sort -rk 3 | cut -d " " -f 4 | head -n 1`
    if [ "$screenshot" = "" ]; then
        echo "No screenshots found."
        return
    fi
    echo "${screenshot}"
    adb ${adbOptions} pull ${screenshot_path}/${screenshot}
}

function startviewserver()
{
    local port=4939
    if [ $# -gt 0 ]; then
            port=$1
    fi
    adb shell service call window 1 i32 $port
}

function stopviewserver()
{
    adb shell service call window 2
}

function isviewserverstarted()
{
    adb shell service call window 3
}

function key_home()
{
    adb shell input keyevent 3
}

function key_back()
{
    adb shell input keyevent 4
}

function key_menu()
{
    adb shell input keyevent 82
}

function smoketest()
{
    if [ ! "$ANDROID_PRODUCT_OUT" ]; then
        echo "Couldn't locate output files.  Try running 'lunch' first." >&2
        return
    fi
    local T=$(gettop)
    if [ ! "$T" ]; then
        echo "Couldn't locate the top of the tree.  Try setting TOP." >&2
        return
    fi

    (\cd "$T" && mmm tests/SmokeTest) &&
      adb uninstall com.android.smoketest > /dev/null &&
      adb uninstall com.android.smoketest.tests > /dev/null &&
      adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTestApp.apk &&
      adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTest.apk &&
      adb shell am instrument -w com.android.smoketest.tests/android.test.InstrumentationTestRunner
}

# simple shortcut to the runtest command
function runtest()
{
    local T=$(gettop)
    if [ ! "$T" ]; then
        echo "Couldn't locate the top of the tree.  Try setting TOP." >&2
        return
    fi
    ("$T"/development/testrunner/runtest.py $@)
}

function godir () {
    if [[ -z "$1" ]]; then
        echo "Usage: godir <regex>"
        return
    fi
    local T=$(gettop)
    local FILELIST
    if [ ! "$OUT_DIR" = "" ]; then
        mkdir -p $OUT_DIR
        FILELIST=$OUT_DIR/filelist
    else
        FILELIST=$T/filelist
    fi
    if [[ ! -f $FILELIST ]]; then
        echo -n "Creating index..."
        (\cd $T; find . -wholename ./out -prune -o -wholename ./.repo -prune -o -type f > $FILELIST)
        echo " Done"
        echo ""
    fi
    local lines
    lines=($(\grep "$1" $FILELIST | sed -e 's/\/[^/]*$//' | sort | uniq))
    if [[ ${#lines[@]} = 0 ]]; then
        echo "Not found"
        return
    fi
    local pathname
    local choice
    if [[ ${#lines[@]} > 1 ]]; then
        while [[ -z "$pathname" ]]; do
            local index=1
            local line
            for line in ${lines[@]}; do
                printf "%6s %s\n" "[$index]" $line
                index=$(($index + 1))
            done
            echo
            echo -n "Select one: "
            unset choice
            read choice
            if [[ $choice -gt ${#lines[@]} || $choice -lt 1 ]]; then
                echo "Invalid choice"
                continue
            fi
            pathname=${lines[@]:$(($choice-1)):1}
        done
    else
        pathname=${lines[@]:0:1}
    fi
    \cd $T/$pathname
}

# Update module-info.json in out.
function refreshmod() {
    if [ ! "$ANDROID_PRODUCT_OUT" ]; then
        echo "No ANDROID_PRODUCT_OUT. Try running 'lunch' first." >&2
        return 1
    fi

    echo "Refreshing modules (building module-info.json). Log at $ANDROID_PRODUCT_OUT/module-info.json.build.log." >&2

    # for the output of the next command
    mkdir -p $ANDROID_PRODUCT_OUT || return 1

    # Note, can't use absolute path because of the way make works.
    m $(get_build_var PRODUCT_OUT)/module-info.json \
        > $ANDROID_PRODUCT_OUT/module-info.json.build.log 2>&1
}

# Verifies that module-info.txt exists, returning nonzero if it doesn't.
function verifymodinfo() {
    if [ ! "$ANDROID_PRODUCT_OUT" ]; then
        if [ "$QUIET_VERIFYMODINFO" != "true" ] ; then
            echo "No ANDROID_PRODUCT_OUT. Try running 'lunch' first." >&2
        fi
        return 1
    fi

    if [ ! -f "$ANDROID_PRODUCT_OUT/module-info.json" ]; then
        if [ "$QUIET_VERIFYMODINFO" != "true" ] ; then
            echo "Could not find module-info.json. Please run 'refreshmod' first." >&2
        fi
        return 1
    fi
}

# List all modules for the current device, as cached in all_modules.txt. If any build change is
# made and it should be reflected in the output, you should run `m nothing` first.
function allmod() {
    cat $ANDROID_PRODUCT_OUT/all_modules.txt 2>/dev/null
}

# Return the Bazel label of a Soong module if it is converted with bp2build.
function bmod()
(
    if [ $# -eq 0 ]; then
        echo "usage: bmod <module 1> <module 2> ... <module n>" >&2
        return 1
    fi

    # We could run bp2build here, but it might trigger bp2build invalidation
    # when used with `b` (e.g. --run_soong_tests) and/or add unnecessary waiting
    # time overhead.
    #
    # For a snappy result, use the latest generated version in soong_injection,
    # and ask users to run m bp2build if it doesn't exist.
    converted_json="$(get_abs_build_var OUT_DIR)/soong/soong_injection/metrics/converted_modules_path_map.json"

    if [ ! -f ${converted_json} ]; then
      echo "bp2build files not found. Have you ran 'm bp2build'?" >&2
      return 1
    fi

    modules=()
    for m in "$@"; do
        modules+=("\"$m\",")
    done
    local res=$(python3 -c "import json
modules = [${modules[*]}]
converted_json='$converted_json'
bp2build_converted_map = json.load(open(converted_json))
for module in modules:
    if module not in bp2build_converted_map:
        print(module + ' is not converted to Bazel.')
    else:
        print(bp2build_converted_map[module] + ':' + module)")

    echo "${res}"
    unconverted_count=$(echo "${res}" | grep -c "not converted to Bazel")
    if [[ ${unconverted_count} -ne 0 ]]; then
        return 1
    fi
)

# Get the path of a specific module in the android tree, as cached in module-info.json.
# If any build change is made, and it should be reflected in the output, you should run
# 'refreshmod' first.  Note: This is the inverse of dirmods.
function pathmod() {
    if [[ $# -ne 1 ]]; then
        echo "usage: pathmod <module>" >&2
        return 1
    fi

    verifymodinfo || return 1

    local relpath=$(python3 -c "import json, os
module = '$1'
module_info = json.load(open('$ANDROID_PRODUCT_OUT/module-info.json'))
if module not in module_info:
    exit(1)
print(module_info[module]['path'][0])" 2>/dev/null)

    if [ -z "$relpath" ]; then
        echo "Could not find module '$1' (try 'refreshmod' if there have been build changes?)." >&2
        return 1
    else
        echo "$ANDROID_BUILD_TOP/$relpath"
    fi
}

# Get the path of a specific module in the android tree, as cached in module-info.json.
# If any build change is made, and it should be reflected in the output, you should run
# 'refreshmod' first.  Note: This is the inverse of pathmod.
function dirmods() {
    if [[ $# -ne 1 ]]; then
        echo "usage: dirmods <path>" >&2
        return 1
    fi

    verifymodinfo || return 1

    python3 -c "import json, os
dir = '$1'
while dir.endswith('/'):
    dir = dir[:-1]
prefix = dir + '/'
module_info = json.load(open('$ANDROID_PRODUCT_OUT/module-info.json'))
results = set()
for m in module_info.values():
    for path in m.get(u'path', []):
        if path == dir or path.startswith(prefix):
            name = m.get(u'module_name')
            if name:
                results.add(name)
for name in sorted(results):
    print(name)
"
}


# Go to a specific module in the android tree, as cached in module-info.json. If any build change
# is made, and it should be reflected in the output, you should run 'refreshmod' first.
function gomod() {
    if [[ $# -ne 1 ]]; then
        echo "usage: gomod <module>" >&2
        return 1
    fi

    local path="$(pathmod $@)"
    if [ -z "$path" ]; then
        return 1
    fi
    cd $path
}

# Gets the list of a module's installed outputs, as cached in module-info.json.
# If any build change is made, and it should be reflected in the output, you should run 'refreshmod' first.
function outmod() {
    if [[ $# -ne 1 ]]; then
        echo "usage: outmod <module>" >&2
        return 1
    fi

    verifymodinfo || return 1

    local relpath
    relpath=$(python3 -c "import json, os
module = '$1'
module_info = json.load(open('$ANDROID_PRODUCT_OUT/module-info.json'))
if module not in module_info:
    exit(1)
for output in module_info[module]['installed']:
    print(os.path.join('$ANDROID_BUILD_TOP', output))" 2>/dev/null)

    if [ $? -ne 0 ]; then
        echo "Could not find module '$1' (try 'refreshmod' if there have been build changes?)" >&2
        return 1
    elif [ ! -z "$relpath" ]; then
        echo "$relpath"
    fi
}

# adb install a module's apk, as cached in module-info.json. If any build change
# is made, and it should be reflected in the output, you should run 'refreshmod' first.
# Usage: installmod [adb install arguments] <module>
# For example: installmod -r Dialer -> adb install -r /path/to/Dialer.apk
function installmod() {
    if [[ $# -eq 0 ]]; then
        echo "usage: installmod [adb install arguments] <module>" >&2
        echo "" >&2
        echo "Only flags to be passed after the \"install\" in adb install are supported," >&2
        echo "with the exception of -s. If -s is passed it will be placed before the \"install\"." >&2
        echo "-s must be the first flag passed if it exists." >&2
        return 1
    fi

    local _path
    _path=$(outmod ${@:$#:1})
    if [ $? -ne 0 ]; then
        return 1
    fi

    _path=$(echo "$_path" | grep -E \\.apk$ | head -n 1)
    if [ -z "$_path" ]; then
        echo "Module '$1' does not produce a file ending with .apk (try 'refreshmod' if there have been build changes?)" >&2
        return 1
    fi
    local serial_device=""
    if [[ "$1" == "-s" ]]; then
        if [[ $# -le 2 ]]; then
            echo "-s requires an argument" >&2
            return 1
        fi
        serial_device="-s $2"
        shift 2
    fi
    local length=$(( $# - 1 ))
    echo adb $serial_device install ${@:1:$length} $_path
    adb $serial_device install ${@:1:$length} $_path
}

function _complete_android_module_names() {
    local word=${COMP_WORDS[COMP_CWORD]}
    COMPREPLY=( $(allmod | grep -E "^$word") )
}

# Print colored exit condition
function pez {
    "$@"
    local retval=$?
    if [ $retval -ne 0 ]
    then
        echo $'\E'"[0;31mFAILURE\e[00m"
    else
        echo $'\E'"[0;32mSUCCESS\e[00m"
    fi
    return $retval
}

function get_make_command()
{
    # If we're in the top of an Android tree, use soong_ui.bash instead of make
    if [ -f build/soong/soong_ui.bash ]; then
        # Always use the real make if -C is passed in
        for arg in "$@"; do
            if [[ $arg == -C* ]]; then
                echo command make
                return
            fi
        done
        echo build/soong/soong_ui.bash --make-mode
    else
        echo command make
    fi
}

function _wrap_build()
{
    if [[ "${ANDROID_QUIET_BUILD:-}" == true ]]; then
      "$@"
      return $?
    fi
    local start_time=$(date +"%s")
    "$@"
    local ret=$?
    local end_time=$(date +"%s")
    local tdiff=$(($end_time-$start_time))
    local hours=$(($tdiff / 3600 ))
    local mins=$((($tdiff % 3600) / 60))
    local secs=$(($tdiff % 60))
    local ncolors=$(tput colors 2>/dev/null)
    if [ -n "$ncolors" ] && [ $ncolors -ge 8 ]; then
        color_failed=$'\E'"[0;31m"
        color_success=$'\E'"[0;32m"
        color_warning=$'\E'"[0;33m"
        color_reset=$'\E'"[00m"
    else
        color_failed=""
        color_success=""
        color_reset=""
    fi

    echo
    if [ $ret -eq 0 ] ; then
        echo -n "${color_success}#### build completed successfully "
    else
        echo -n "${color_failed}#### failed to build some targets "
    fi
    if [ $hours -gt 0 ] ; then
        printf "(%02g:%02g:%02g (hh:mm:ss))" $hours $mins $secs
    elif [ $mins -gt 0 ] ; then
        printf "(%02g:%02g (mm:ss))" $mins $secs
    elif [ $secs -gt 0 ] ; then
        printf "(%s seconds)" $secs
    fi
    echo " ####${color_reset}"
    echo
    return $ret
}

function _trigger_build()
(
    local -r bc="$1"; shift
    local T=$(gettop)
    if [ -n "$T" ]; then
      _wrap_build "$T/build/soong/soong_ui.bash" --build-mode --${bc} --dir="$(pwd)" "$@"
    else
      >&2 echo "Couldn't locate the top of the tree. Try setting TOP."
      return 1
    fi
    local ret=$?
    if [[ ret -eq 0 &&  -z "${ANDROID_QUIET_BUILD:-}" && -n "${ANDROID_BUILD_BANNER}" ]]; then
      echo "${ANDROID_BUILD_BANNER}"
    fi
    return $ret
)

function m()
(
    _trigger_build "all-modules" "$@"
)

function mm()
(
    _trigger_build "modules-in-a-dir-no-deps" "$@"
)

function mmm()
(
    _trigger_build "modules-in-dirs-no-deps" "$@"
)

function mma()
(
    _trigger_build "modules-in-a-dir" "$@"
)

function mmma()
(
    _trigger_build "modules-in-dirs" "$@"
)

function make()
{
    _wrap_build $(get_make_command "$@") "$@"
}

function _multitree_lunch_error()
{
      >&2 echo "Couldn't locate the top of the tree. Please run \'source build/envsetup.sh\' and multitree_lunch from the root of your workspace."
}

function multitree_build()
{
    local T=$(multitree_gettop)
    if [ -n "$T" ]; then
      "$T/orchestrator/build/orchestrator/core/orchestrator.py" "$@"
    else
      _multitree_lunch_error
      return 1
    fi
}

function provision()
{
    if [ ! "$ANDROID_PRODUCT_OUT" ]; then
        echo "Couldn't locate output files.  Try running 'lunch' first." >&2
        return 1
    fi
    if [ ! -e "$ANDROID_PRODUCT_OUT/provision-device" ]; then
        echo "There is no provisioning script for the device." >&2
        return 1
    fi

    # Check if user really wants to do this.
    if [ "$1" = "--no-confirmation" ]; then
        shift 1
    else
        echo "This action will reflash your device."
        echo ""
        echo "ALL DATA ON THE DEVICE WILL BE IRREVOCABLY ERASED."
        echo ""
        echo -n "Are you sure you want to do this (yes/no)? "
        read
        if [[ "${REPLY}" != "yes" ]] ; then
            echo "Not taking any action. Exiting." >&2
            return 1
        fi
    fi
    "$ANDROID_PRODUCT_OUT/provision-device" "$@"
}

# Zsh needs bashcompinit called to support bash-style completion.
function enable_zsh_completion() {
    # Don't override user's options if bash-style completion is already enabled.
    if ! declare -f complete >/dev/null; then
        autoload -U compinit && compinit
        autoload -U bashcompinit && bashcompinit
    fi
}

function validate_current_shell() {
    local current_sh="$(ps -o command -p $$)"
    case "$current_sh" in
        *bash*)
            function check_type() { type -t "$1"; }
            ;;
        *zsh*)
            function check_type() { type "$1"; }
            enable_zsh_completion ;;
        *)
            echo -e "WARNING: Only bash and zsh are supported.\nUse of other shell would lead to erroneous results."
            ;;
    esac
}

# Execute the contents of any vendorsetup.sh files we can find.
# Unless we find an allowed-vendorsetup_sh-files file, in which case we'll only
# load those.
#
# This allows loading only approved vendorsetup.sh files
function source_vendorsetup() {
    unset VENDOR_PYTHONPATH
    local T="$(gettop)"
    allowed=
    for f in $(cd "$T" && find -L device vendor product -maxdepth 4 -name 'allowed-vendorsetup_sh-files' 2>/dev/null | sort); do
        if [ -n "$allowed" ]; then
            echo "More than one 'allowed_vendorsetup_sh-files' file found, not including any vendorsetup.sh files:"
            echo "  $allowed"
            echo "  $f"
            return
        fi
        allowed="$T/$f"
    done

    allowed_files=
    [ -n "$allowed" ] && allowed_files=$(cat "$allowed")
    for dir in device vendor product; do
        for f in $(cd "$T" && test -d $dir && \
            find -L $dir -maxdepth 4 -name 'vendorsetup.sh' 2>/dev/null | sort); do

            if [[ -z "$allowed" || "$allowed_files" =~ $f ]]; then
                echo "including $f"; . "$T/$f"
            else
                echo "ignoring $f, not in $allowed"
            fi
        done
    done

    if [[ "${PWD}" == /google/cog/* ]]; then
        f="build/make/cogsetup.sh"
        echo "including $f"; . "$T/$f"
    fi
}

function showcommands() {
    local T=$(gettop)
    if [[ -z "$TARGET_PRODUCT" ]]; then
        >&2 echo "TARGET_PRODUCT not set. Run lunch."
        return
    fi
    case $(uname -s) in
        Darwin)
            PREBUILT_NAME=darwin-x86
            ;;
        Linux)
            PREBUILT_NAME=linux-x86
            ;;
        *)
            >&2 echo Unknown host $(uname -s)
            return
            ;;
    esac
    OUT_DIR="$(get_abs_build_var OUT_DIR)"
    if [[ "$1" == "--regenerate" ]]; then
      shift 1
      NINJA_ARGS="-t commands $@" m
    else
      (cd $T && prebuilts/build-tools/$PREBUILT_NAME/bin/ninja \
          -f $OUT_DIR/combined-${TARGET_PRODUCT}.ninja \
          -t commands "$@")
    fi
}

function avbtool() {
    if [[ ! -f "$ANDROID_SOONG_HOST_OUT"/bin/avbtool ]]; then
        m avbtool
    fi
    "$ANDROID_SOONG_HOST_OUT"/bin/avbtool $@
}

function overrideflags() {
    local T="$(gettop)"
    (\cd "${T}" && build/make/tools/overrideflags.sh "$@")
}

function aninja() {
    local T="$(gettop)"
    (\cd "${T}" && prebuilts/build-tools/linux-x86/bin/ninja -f out/combined-${TARGET_PRODUCT}.ninja "$@")
}

function vosupload() {
    read -p "Enter your SourceForge username: " sf_username
    read -p "Enter the output filename (without .zip extension): " filename
    target_device="$(get_build_var TARGET_DEVICE)"
    product_out="out/target/product/$target_device/"
    source_file="$product_out/${filename}.zip"
    destination="${sf_username}@frs.sourceforge.net:/home/frs/project/voltage-os/$target_device/"
    rsync -e ssh "$source_file" "$destination"
}

validate_current_shell
set_global_paths
source_vendorsetup
addcompletions

# check and set ccache path on envsetup
if [ -z ${CCACHE_EXEC} ]; then
    ccache_path=$(which ccache)
    if [ ! -z "$ccache_path" ]; then
        export USE_CCACHE=1
        export CCACHE_EXEC="$ccache_path"
        if [ -z ${CCACHE_DIR} ]; then
            export CCACHE_DIR=${HOME}/.ccache
        fi
        $ccache_path -o compression=true
        echo -e "ccache enabled and CCACHE_EXEC has been set to : $ccache_path"
    else
        echo -e "ccache not found installed!"
    fi
fi

# check and set ccache path on envsetup
if [ -z ${CCACHE_EXEC} ]; then
    ccache_path=$(which ccache)
    if [ ! -z "$ccache_path" ]; then
	export USE_CCACHE=1
	export CCACHE_COMPRESS=1
        export CCACHE_EXEC="$ccache_path"
	echo -e "\e[1mccache enabled and \e[32m\e[4mCCACHE_EXEC\e[0m \e[1mhas been set to : \e[4m$ccache_path\e[0m"
    else
        echo -e "\e[31m\e[1mccache not found/installed!\e[0m"
    fi
fi

export ANDROID_BUILD_TOP=$(gettop)

. $ANDROID_BUILD_TOP/vendor/voltage/build/envsetup.sh