Some IP-cameras require additional parameters set to make the network interface work.
Use extras boot variable. In Linux console run this
fw_setenv extras 'hieth.phyaddru=0 hieth.phyaddrd=1' && reboot
If the above settings did not work, try this instead
fw_setenv extras 'hieth.phyaddru=1 hieth.phyaddrd=0' && reboot
If the above settings did not work, try this instead
fw_setenv extras 'hieth.mdioifu=0 hieth.mdioifd=0' && reboot
If the above settings did not work, try this instead
fw_setenv extras 'hieth.mdioifu=1 hieth.mdioifd=1' && reboot
If nothing of the above worked for you, seek help on our Telegram channel.
Set phyaddru and phyaddrd variables from U-Boot console:
setenv phyaddru 0; setenv phyaddrd 1; saveenv; reset
If the above settings did not work, try this instead
setenv phyaddru 1; setenv phyaddrd 0; saveenv; reset
If the above settings did not work, try this instead
setenv phyaddru 0; setenv phyaddrd 0; saveenv; reset
If the above settings did not work, try this instead
setenv phyaddru 1; setenv phyaddrd 1; saveenv; reset
If nothing of the above worked for you, seek help on our Telegram channel.