Not working USB HID examples, device is never ready

[tankyx]

Operating System

Windows 10

Arduino IDE version

Arduino 2.3.2

Board

ESP32-S3 Devkitm-1

ArduinoCore version

1.8.6

TinyUSB Library version

3.3.1

Sketch as ATTACHED TXT

Cant attach it, github is not working correctly

/*********************************************************************
 Adafruit invests time and resources providing this open source code,
 please support Adafruit and open-source hardware by purchasing
 products from Adafruit!
 MIT license, check LICENSE for more information
 Copyright (c) 2019 Ha Thach for Adafruit Industries
 All text above, and the splash screen below must be included in
 any redistribution
*********************************************************************/

#include "Adafruit_TinyUSB.h"

/* This sketch demonstrates USB HID mouse
 * will move mouse toward bottom right of monitor
 */

// HID report descriptor using TinyUSB's template
// Single Report (no ID) descriptor
uint8_t const desc_hid_report[] = {
    TUD_HID_REPORT_DESC_MOUSE()
};

// USB HID object
Adafruit_USBD_HID usb_hid;

// the setup function runs once when you press reset or power the board
void setup() {
  // Manual begin() is required on core without built-in support e.g. mbed rp2040
  if (!TinyUSBDevice.isInitialized()) {
    TinyUSBDevice.begin(0);
  }

  // Set up HID
  usb_hid.setBootProtocol(HID_ITF_PROTOCOL_MOUSE);
  usb_hid.setPollInterval(2);
  usb_hid.setReportDescriptor(desc_hid_report, sizeof(desc_hid_report));
  usb_hid.setStringDescriptor("TinyUSB Mouse");

  usb_hid.begin();

  Serial.begin(115200);
  Serial.println("Adafruit TinyUSB HID Mouse example");
}

void process_hid() {
  // Remote wakeup
  if (TinyUSBDevice.suspended()) {
    // Wake up host if we are in suspend mode
    // and REMOTE_WAKEUP feature is enabled by host
    TinyUSBDevice.remoteWakeup();
  }

  if (usb_hid.ready()) {
    Serial.println("Ready");
    uint8_t const report_id = 0; // no ID
    int8_t const delta = 5;
    usb_hid.mouseMove(report_id, delta, delta); // right + down
  }
}

void loop() {
  #ifdef TINYUSB_NEED_POLLING_TASK
  // Manual call tud_task since it isn't called by Core's background
  TinyUSBDevice.task();
  #endif

  // not enumerated()/mounted() yet: nothing to do
  if (!TinyUSBDevice.mounted()) {
    return;
  }

  // poll gpio once each 10 ms
  static uint32_t ms = 0;
  if (millis() - ms > 10) {
    ms = millis();
    process_hid();
  }
}

Compiled Log as ATTACHED TXT

Sketch uses 306641 bytes (23%) of program storage space. Maximum is 1310720 bytes.
Global variables use 15592 bytes (4%) of dynamic memory, leaving 312088 bytes for local variables. Maximum is 327680 bytes.

What happened ?

The script is not working, usb_hid.ready() is always false.

How to reproduce ?

Plug in both USB, Load the sketch, upload it using the COM port of the devkit

Debug Log

  Embedded Flash    : No
  Embedded PSRAM    : No
  2.4GHz WiFi       : Yes
  Classic BT        : No
  BT Low Energy     : Yes
  IEEE 802.15.4     : No
------------------------------------------
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   401172 B ( 391.8 KB)
  Free Bytes        :   366020 B ( 357.4 KB)
  Allocated Bytes   :    30136 B (  29.4 KB)
  Minimum Free Bytes:   360884 B ( 352.4 KB)
  Largest Free Block:   335860 B ( 328.0 KB)
------------------------------------------
Flash Info:
------------------------------------------
  Chip Size         : 16777216 B (16 MB)
  Block Size        :    65536 B (  64.0 KB)
  Sector Size       :     4096 B (   4.0 KB)
  Page Size         :      256 B (   0.2 KB)
  Bus Speed         : 80 MHz
  Bus Mode          : QIO
------------------------------------------
Partitions Info:
------------------------------------------
                nvs : addr: 0x00009000, size:    20.0 KB, type: DATA, subtype: NVS
            otadata : addr: 0x0000E000, size:     8.0 KB, type: DATA, subtype: OTA
               app0 : addr: 0x00010000, size:  1280.0 KB, type:  APP, subtype: OTA_0
               app1 : addr: 0x00150000, size:  1280.0 KB, type:  APP, subtype: OTA_1
             spiffs : addr: 0x00290000, size:  1408.0 KB, type: DATA, subtype: SPIFFS
           coredump : addr: 0x003F0000, size:    64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
  Compile Date/Time : Jul  1 2024 11:51:07
  Compile Host OS   : windows
  ESP-IDF Version   : v5.1.4-51-g442a798083-dirty
  Arduino Version   : 3.0.1
------------------------------------------
Board Info:
------------------------------------------
  Arduino Board     : ESP32S3_DEV
  Arduino Variant   : esp32s3
  Arduino FQBN      : esp32:esp32:esp32s3:UploadSpeed=921600,USBMode=hwcdc,CDCOnBoot=cdc,MSCOnBoot=default,DFUOnBoot=default,UploadMode=default,CPUFreq=240,FlashMode=qio,FlashSize=4M,PartitionScheme=default,DebugLevel=verbose,PSRAM=disabled,LoopCore=1,EventsCore=1,EraseFlash=none,JTAGAdapter=builtin,ZigbeeMode=default
============ Before Setup End ============
[  2605][I][esp32-hal-periman.c:141] perimanSetPinBus(): Pin 19 already has type USB_DM (45) with bus 0x3fc95e4c
[  2605][I][esp32-hal-periman.c:141] perimanSetPinBus(): Pin 20 already has type USB_DP (46) with bus 0x3fc95e4c
=========== After Setup Start ============
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   401172 B ( 391.8 KB)
  Free Bytes        :   365668 B ( 357.1 KB)
  Allocated Bytes   :    30392 B (  29.7 KB)
  Minimum Free Bytes:   360280 B ( 351.8 KB)
  Largest Free Block:   335860 B ( 328.0 KB)
------------------------------------------
GPIO Info:
------------------------------------------
  GPIO : BUS_TYPE[bus/unit][chan]
  --------------------------------------  
    19 : USB_DM
    20 : USB_DP
    43 : UART_TX[0]
    44 : UART_RX[0]
============ After Setup End =============

Screenshots

No response