arista.eos.eos_ntp_global_module.rst

arista.eos.eos_ntp_global

Manages ntp resource module

Version added: 3.1.0

• Synopsis
• Parameters
• Notes
• Examples
• Return Values
• Status

Synopsis

• This module configures and manages the attributes of ntp on Arista EOS platforms.

Parameters

Parameter					Choices/Defaults	Comments
config dictionary						A dictionary of ntp options
	authenticate dictionary					Require authentication for NTP synchronization.
		enable boolean			Choices: no yes	Enable authentication for NTP synchronization.
		servers boolean			Choices: no yes	Authentication required only for incoming NTP server responses.
	authentication_keys list / elements=dictionary					Define a key to use for authentication.
		algorithm string			Choices: md5 sha1	hash algorithm,
		encryption integer			Choices: 0 7	key type
		id integer				key identifier.
		key string				Unobfuscated key string.
	local_interface string					Configure the interface from which the IP source address is taken.
	qos_dscp integer					Set DSCP value in IP header
	serve dictionary					Configure the switch as an NTP server.
		access_lists list / elements=dictionary				Configure access control list.
			acls list / elements=dictionary			Access lists to be configured under the afi
				acl_name string		Name of the access list.
				direction string	Choices: in out	direction for the packets.
				vrf string		VRF in which to apply the access control list.
			afi string			ip/ipv6 config commands.
		all boolean			Choices: no yes	Service NTP requests received on any interface.
	servers list / elements=dictionary					Configure NTP server to synchronize to.
		burst boolean			Choices: no yes	Send a burst of packets instead of the usual one.
		iburst boolean			Choices: no yes	Send bursts of packets until the server is reached
		key_id integer				Set a key to use for authentication.
		local_interface string				Configure the interface from which the IP source address is taken.
		maxpoll integer				Maximum poll interval.
		minpoll integer				Minimum poll interval.
		prefer boolean			Choices: no yes	Mark this server as preferred.
		server string / required				Hostname or A.B.C.D or A:B:C:D:E:F:G:H.
		source string				Configure the interface from which the IP source address is taken.
		version integer				NTP version.
		vrf string				vrf name.
	trusted_key string					Configure the set of keys that are accepted for incoming messages
running_config string						This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section ntp. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string					Choices: deleted merged ← overridden replaced gathered rendered parsed	The state the configuration should be left in. The states replaced and overridden have identical behaviour for this module. Please refer to examples for more details.

Notes

Note

• Tested against Arista EOS 4.24.60M
• This module works with connection network_cli. See the https://docs.ansible.com/ansible/latest/network/user_guide/platform_eos.html.

Examples

# Using merged

# Before state:
# -------------
# localhost(config)#show running-config | section ntp
# localhost(config)#

- name: Merge provided configuration with device configuration
  arista.eos.eos_ntp_global:
    config:
      authenticate:
        enable: true
      authentication_keys:
        - id: 2
          algorithm: "sha1"
          encryption: 7
          key: "123456"
        - id: 23
          algorithm: "md5"
          encryption: 7
          key: "123456"
      local_interface: "Ethernet1"
      qos_dscp: 10
      trusted_key: 23
      servers:
        - server: "10.1.1.1"
          vrf: "vrf01"
          burst: true
          prefer: true
        - server: "25.1.1.1"
          vrf: "vrf01"
          maxpoll: 15
          key_id: 2
      serve:
        access_lists:
          - afi: "ip"
            acls:
              - acl_name: "acl01"
                direction: "in"
          - afi: "ipv6"
            acls:
              - acl_name: "acl02"
                direction: "in"

# After State

# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#
#
#
# Module Execution:
# "after": {
#         "authenticate": {
#             "enable": true
#         },
#         "authentication_keys": [
#             {
#                 "algorithm": "sha1",
#                 "encryption": 7,
#                 "id": 2,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             },
#             {
#                 "algorithm": "md5",
#                 "encryption": 7,
#                 "id": 23,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             }
#         ],
#         "local_interface": "Ethernet1",
#         "qos_dscp": 10,
#         "serve": {
#             "access_lists": [
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl01",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ip"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl02",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ]
#         },
#         "servers": [
#             {
#                 "burst": true,
#                 "prefer": true,
#                 "server": "10.1.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "key_id": 2,
#                 "maxpoll": 15,
#                 "server": "25.1.1.1",
#                 "vrf": "vrf01"
#             }
#         ],
#         "trusted_key": "23"
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#         "ntp serve ip access-group acl01 in",
#         "ntp serve ipv6 access-group acl02 in",
#         "ntp authentication-key 2 sha1 7 ********",
#         "ntp authentication-key 23 md5 7 ********",
#         "ntp server vrf vrf01 10.1.1.1 burst prefer",
#         "ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#         "ntp authenticate",
#         "ntp local-interface Ethernet1",
#         "ntp qos dscp 10",
#         "ntp trusted-key 23"
#     ],

# Using Replaced

# Before State

# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#

- name: Replace
  arista.eos.eos_ntp_global:
    config:
      qos_dscp: 15
      authentication_keys:
        - id: 2
          algorithm: "md5"
          encryption: 7
          key: "123456"
      servers:
        - server: "11.21.1.1"
          vrf: "vrf01"
          burst: true
          prefer: true
          minpoll: 13
      serve:
        access_lists:
          - afi: "ip"
            acls:
              - acl_name: "acl03"
                direction: "in"
    state: replaced

# After State:
# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 md5 7 123456
# ntp qos dscp 15
# ntp server vrf vrf01 11.21.1.1 prefer burst minpoll 13
# ntp serve ip access-group acl03 in
# localhost(config)#
#
#
# Module Execution:
# "after": {
#        "authentication_keys": [
#            {
#                "algorithm": "md5",
#                "encryption": 7,
#                "id": 2,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            }
#        ],
#        "qos_dscp": 15,
#        "serve": {
#            "access_lists": [
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl03",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ip"
#                }
#            ]
#        },
#        "servers": [
#            {
#                "burst": true,
#                "minpoll": 13,
#                "prefer": true,
#                "server": "11.21.1.1",
#                "vrf": "vrf01"
#            }
#        ]
#    },
#    "before": {
#        "authenticate": {
#            "enable": true
#        },
#        "authentication_keys": [
#            {
#                "algorithm": "sha1",
#                "encryption": 7,
#                "id": 2,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            },
#            {
#                "algorithm": "md5",
#                "encryption": 7,
#                "id": 23,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            }
#        ],
#        "local_interface": "Ethernet1",
#        "qos_dscp": 10,
#        "serve": {
#            "access_lists": [
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl01",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ip"
#                },
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl02",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ipv6"
#                }
#            ]
#        },
#        "servers": [
#            {
#                "burst": true,
#                "prefer": true,
#                "server": "10.1.1.1",
#                "vrf": "vrf01"
#            },
#            {
#                "key_id": 2,
#                "maxpoll": 15,
#                "server": "25.1.1.1",
#                "vrf": "vrf01"
#            }
#        ],
#        "trusted_key": "23"
#    },
#    "changed": true,
#    "commands": [
#        "no ntp serve ip access-group acl01 in",
#        "no ntp serve ipv6 access-group acl02 in",
#        "no ntp authentication-key 23 md5 7 ********",
#        "no ntp server vrf vrf01 10.1.1.1 burst prefer",
#        "no ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#        "no ntp authenticate",
#        "no ntp local-interface Ethernet1",
#        "no ntp trusted-key 23",
#        "ntp serve ip access-group acl03 in",
#        "ntp authentication-key 2 md5 7 ********",
#        "ntp server vrf vrf01 11.21.1.1 burst minpoll 13 prefer",
#        "ntp qos dscp 15"
#    ],
#
# Using Overridden

# Before State

# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#

- name: Replace
  arista.eos.eos_ntp_global:
    config:
      qos_dscp: 15
      authentication_keys:
        - id: 2
          algorithm: "md5"
          encryption: 7
          key: "123456"
      servers:
        - server: "11.21.1.1"
          vrf: "vrf01"
          burst: true
          prefer: true
          minpoll: 13
      serve:
        access_lists:
          - afi: "ip"
            acls:
              - acl_name: "acl03"
                direction: "in"
    state: overridden

# After State:
# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 md5 7 123456
# ntp qos dscp 15
# ntp server vrf vrf01 11.21.1.1 prefer burst minpoll 13
# ntp serve ip access-group acl03 in
# localhost(config)#
#
#
# Module Execution:
# "after": {
#        "authentication_keys": [
#            {
#                "algorithm": "md5",
#                "encryption": 7,
#                "id": 2,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            }
#        ],
#        "qos_dscp": 15,
#        "serve": {
#            "access_lists": [
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl03",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ip"
#                }
#            ]
#        },
#        "servers": [
#            {
#                "burst": true,
#                "minpoll": 13,
#                "prefer": true,
#                "server": "11.21.1.1",
#                "vrf": "vrf01"
#            }
#        ]
#    },
#    "before": {
#        "authenticate": {
#            "enable": true
#        },
#        "authentication_keys": [
#            {
#                "algorithm": "sha1",
#                "encryption": 7,
#                "id": 2,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            },
#            {
#                "algorithm": "md5",
#                "encryption": 7,
#                "id": 23,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            }
#        ],
#        "local_interface": "Ethernet1",
#        "qos_dscp": 10,
#        "serve": {
#            "access_lists": [
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl01",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ip"
#                },
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl02",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ipv6"
#                }
#            ]
#        },
#        "servers": [
#            {
#                "burst": true,
#                "prefer": true,
#                "server": "10.1.1.1",
#                "vrf": "vrf01"
#            },
#            {
#                "key_id": 2,
#                "maxpoll": 15,
#                "server": "25.1.1.1",
#                "vrf": "vrf01"
#            }
#        ],
#        "trusted_key": "23"
#    },
#    "changed": true,
#    "commands": [
#        "no ntp serve ip access-group acl01 in",
#        "no ntp serve ipv6 access-group acl02 in",
#        "no ntp authentication-key 23 md5 7 ********",
#        "no ntp server vrf vrf01 10.1.1.1 burst prefer",
#        "no ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#        "no ntp authenticate",
#        "no ntp local-interface Ethernet1",
#        "no ntp trusted-key 23",
#        "ntp serve ip access-group acl03 in",
#        "ntp authentication-key 2 md5 7 ********",
#        "ntp server vrf vrf01 11.21.1.1 burst minpoll 13 prefer",
#        "ntp qos dscp 15"
#    ],
#

# using deleted:
# Before State

# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 11.21.1.1 prefer burst minpoll 13
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#

- name: Delete  ntp-global
  arista.eos.eos_ntp_global:
    state: deleted

# After State:
#  localhost(config)#show running-config | section ntp
# localhost(config)#
#
#
# # Module Execution
# "after": {},
#     "before": {
#         "authenticate": {
#             "enable": true
#         },
#         "authentication_keys": [
#             {
#                 "algorithm": "sha1",
#                 "encryption": 7,
#                 "id": 2,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             },
#             {
#                 "algorithm": "md5",
#                 "encryption": 7,
#                 "id": 23,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             }
#         ],
#         "local_interface": "Ethernet1",
#         "qos_dscp": 10,
#         "serve": {
#             "access_lists": [
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl01",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ip"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl02",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ]
#         },
#         "servers": [
#             {
#                 "burst": true,
#                 "prefer": true,
#                 "server": "10.1.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "burst": true,
#                 "minpoll": 13,
#                 "prefer": true,
#                 "server": "11.21.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "key": 2,
#                 "maxpoll": 15,
#                 "server": "25.1.1.1",
#                 "vrf": "vrf01"
#             }
#         ],
#         "trusted_key": "23"
#     },
#     "changed": true,
#     "commands": [
#         "no ntp serve ip access-group acl01 in",
#         "no ntp serve ipv6 access-group acl02 in",
#         "no ntp authentication-key 2 sha1 7 ********",
#         "no ntp authentication-key 23 md5 7 ********",
#         "no ntp server vrf vrf01 10.1.1.1 burst prefer",
#         "no ntp server vrf vrf01 11.21.1.1 burst minpoll 13 prefer",
#         "no ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#         "no ntp authenticate",
#         "no ntp local-interface Ethernet1",
#         "no ntp qos dscp 10",
#         "no ntp trusted-key 23"
#     ],
#

# Using parsed:
# parsed.cfg
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 11.21.1.1 prefer burst minpoll 13
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in

- name: parse configs
  arista.eos.eos_ntp_global:
    running_config: "{{ lookup('file', './parsed_ntp_global.cfg') }}"
    state: parsed
  tags:
    - parsed

# Module Execution
# "parsed": {
#         "authenticate": {
#             "enable": true
#         },
#         "authentication_keys": [
#             {
#                 "algorithm": "sha1",
#                 "encryption": 7,
#                 "id": 2,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             },
#             {
#                 "algorithm": "md5",
#                 "encryption": 7,
#                 "id": 23,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             }
#         ],
#         "local_interface": "Ethernet1",
#         "qos_dscp": 10,
#         "serve": {
#             "access_lists": [
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl01",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ip"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl02",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ]
#         },
#         "servers": [
#             {
#                 "burst": true,
#                 "prefer": true,
#                 "server": "10.1.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "burst": true,
#                 "minpoll": 13,
#                 "prefer": true,
#                 "server": "11.21.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "key": 2,
#                 "maxpoll": 15,
#                 "server": "25.1.1.1",
#                 "vrf": "vrf01"
#             }
#         ],
#         "trusted_key": "23"
#     }
# }

# using Gathered
# Device config:
# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#

- name: gather configs
  arista.eos.eos_ntp_global:
    state: gathered
  tags:
    - gathered

# Module Execution

#   "gathered": {
#         "authenticate": {
#             "enable": true
#         },
#         "authentication_keys": [
#             {
#                 "algorithm": "sha1",
#                 "encryption": 7,
#                 "id": 2,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             },
#             {
#                 "algorithm": "md5",
#                 "encryption": 7,
#                 "id": 23,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             }
#         ],
#         "local_interface": "Ethernet1",
#         "qos_dscp": 10,
#         "serve": {
#             "access_lists": [
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl01",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ip"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl02",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ]
#         },
#         "servers": [
#             {
#                 "burst": true,
#                 "prefer": true,
#                 "server": "10.1.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "key_id": 2,
#                 "maxpoll": 15,
#                 "server": "25.1.1.1",
#                 "vrf": "vrf01"
#             }
#         ],
#         "trusted_key": "23"
#     },
#     "invocation": {
#         "module_args": {
#             "config": null,
#             "running_config": null,
#             "state": "gathered"
#         }
#     }
# }

# using rendered:

- name: Render provided configuration
  arista.eos.eos_ntp_global:
    config:
      authenticate:
        enable: true
      authentication_keys:
        - id: 2
          algorithm: "sha1"
          encryption: 7
          key: "123456"
        - id: 23
          algorithm: "md5"
          encryption: 7
          key: "123456"
      local_interface: "Ethernet1"
      qos_dscp: 10
      trusted_key: 23
      servers:
        - server: "10.1.1.1"
          vrf: "vrf01"
          burst: true
          prefer: true
        - server: "25.1.1.1"
          vrf: "vrf01"
          maxpoll: 15
          key_id: 2
      serve:
        access_lists:
          - afi: "ip"
            acls:
              - acl_name: "acl01"
                direction: "in"
          - afi: "ipv6"
            acls:
              - acl_name: "acl02"
                direction: "in"
    state: rendered

# Module Execution:
# "rendered": [
#         "ntp serve ip access-group acl01 in",
#         "ntp serve ipv6 access-group acl02 in",
#         "ntp authentication-key 2 sha1 7 ********",
#         "ntp authentication-key 23 md5 7 ********",
#         "ntp server vrf vrf01 10.1.1.1 burst prefer",
#         "ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#         "ntp authenticate",
#         "ntp local-interface Ethernet1",
#         "ntp qos dscp 10",
#         "ntp trusted-key 23"
#     ]
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after dictionary	when changed	The resulting configuration after module execution. Sample: This output will always be in the same format as the module argspec.
before dictionary	when state is merged, replaced, overridden, deleted or purged	The configuration prior to the module execution. Sample: This output will always be in the same format as the module argspec.
commands list	when state is merged, replaced, overridden, deleted or purged	The set of commands pushed to the remote device. Sample: ['ntp master stratum 2', 'ntp peer 198.51.100.1 use-vrf test maxpoll 7', 'ntp authentication-key 10 md5 wawyhanx2 7', 'ntp access-group peer PeerAcl1', 'ntp access-group peer PeerAcl2', 'ntp access-group query-only QueryAcl1']
gathered list	when state is gathered	Facts about the network resource gathered from the remote device as structured data. Sample: This output will always be in the same format as the module argspec.
parsed list	when state is parsed	The device native config provided in running_config option parsed into structured data as per module argspec. Sample: This output will always be in the same format as the module argspec.
rendered list	when state is rendered	The provided configuration in the task rendered in device-native format (offline). Sample: ['ntp authentication-key 2 sha1 7 123456', 'ntp authentication-key 23 md5 7 123456', 'ntp trusted-key 23', 'ntp authenticate', 'ntp local-interface Ethernet1', 'ntp qos dscp 10', 'ntp server vrf vrf01 10.1.1.1 prefer burst', 'ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2', 'ntp serve ip access-group acl01 in', 'ntp serve ipv6 access-group acl02 in']

Status

Authors

• Gomathi Selvi Srinivasan (@GomathiselviS)