Skip to content

Latest commit

 

History

History
37 lines (30 loc) · 1.11 KB

README.md

File metadata and controls

37 lines (30 loc) · 1.11 KB
Raw

bbq10pmod Kernel Module

Raspberry Pi

Wiring

Pi          -   Module
3V3         -   3V3
GND         -   GND
GPIO2/SDA1  -   SDA
GPIO3/SCL1  -   SCL
GPIO11      -   INT

Installation

Installing this Kernel Module on a Raspberry Pi is quite straight forward.

  • sudo apt-get update && sudo apt-get upgrade -y && sudo apt-get install git raspberrypi-kernel-headers
  • git clone https://github.com/arturo182/bbq10pmod_module.git && cd bbq10pmod_module
  • make && make dtbo
  • sudo cp bbq10pmod.ko /lib/modules/4.19.57+/kernel/drivers/i2c/bbq10pmod.ko
  • sudo cp i2c-bbq10pmod.dtbo /boot/overlays/
  • sudo sh -c "echo dtoverlay=i2c-bbq10pmod >> /boot/config.txt"
  • sudo sh -c "echo bbq10pmod >> /etc/modules"
  • sudo depmod
  • sudo reboot

After these steps you should have the PMOD working on your Raspberry Pi. You can check this via dmesg:

[    8.249265] i2c /dev entries driver
[    8.337603] bbq10pmod: loading out-of-tree module taints kernel.
[...]
[   16.524469] bbq10pmod_probe version: 0x02
[   16.536031] input: bbq10pmod as /devices/platform/soc/20804000.i2c/i2c-1/1-001f/input/input0