Stops at 27%

[MarkRS-UK]

• **Etcher version:

• 1.19.21 (with fix as Error: (0 , h.requestMetadata) is not a function #4150 (comment))

• **Operating system and architecture: Fedora 38 (x86_64) Live USB stick onto Dell/Wyse Dx0Q "thin client"

• **Image flashed: haos x86_64 generic 13.1

• **What do you think should have happened: Install OS image on target ssd

• **What happened:

• Flash install goes along up to 27% and then stops.

• The disk (120 Gb) shows eight haos partitions, totalling ~1.8Gb and ~4Gb unallocated! Seems to have "lost" ~108Gb!

• Free space on Fedora installation shows as more than 1Gb.

• I have done this three or four times now, always with exactly this result, stops at 27%

• **Do you see any meaningful error information in the DevTools?

• No error. Console shows installation up to 27% without error then just stops.

[aceoffice]

I also face exactly the same problem!! stuck at 27%.. What I did was that I downloaded the WinZip software (trial version). Then I unzipped the the xz extension file, which later become the disc image file. I use this unzipped file to flash over to my NVME SSD via Balena Etcher. 100% Success.

[MarkRS-UK]

Thank you @aceoffice , that worked perfectly!
Now you mention it I see the HA installation guide does say to try that :(
I don't s'pose there's a fix for that, so I'll close this issue.