Skip to content
This repository has been archived by the owner on Nov 29, 2017. It is now read-only.

Latest commit

 

History

History
199 lines (151 loc) · 9.18 KB

ChangeLog.md

File metadata and controls

199 lines (151 loc) · 9.18 KB
Raw

Change Log

bosh-bootstrap is a command line tool that you can run on your laptop and automatically get a Micro BOSH deployed on AWS, OpenStack, or vSphere.

gem install bosh-bootstrap
bosh-bootstrap deploy

v0.18.1

  • [all] unping fog version

v0.18

  • [aws-openstack] added support for custom ntp servers
  • [all] configure ntp for microbosh VM as well as for VM's spawned by the director

v0.17.1

  • use light stemcells by default in aws

v0.17

  • [aws-openstack] Added proxy support
  • Bump vm size to m3
  • [aws] use light stemcell

v0.16

  • [aws] Enable the resurrector by default
  • Bump the size of the permanent disk on the microbosh from 16GB to 32GB
  • Fix deprecated calls to :should in tests
  • Remove instructions regarding explicit install of fog, as it is no longer necessary
  • Require cyoi 0.11.3 for a bug fix regarding microbosh security groups [v0.16.1]
  • Allow openstack state timeout to be configurable

v0.15

  • No more separate Gemfile and ugly bundle install step; thanks to BOSH CLI upgrading its dependencies sufficiently so as not to clash with bosh-bootstrap
  • This allows inclusion in the traveling-bosh project

v0.14

  • default target directory is current director, rather than ~/.microbosh
  • fixed to use new stemcells
  • [aws] VPC support - detects if VPCs available and allows selection, then select of subset, then creates security groups into the VPC
  • [aws vpc] network type: manual for vpc
  • [aws] reuse existing bosh stemcell AMIs - automatically detects if a stemcell has been uploaded/converted into an AMI [v0.14.2]
  • [openstack] reuse existing bosh stemcell images - automatically detects if a stemcell has been uploaded/converted into an OpenStack image [v0.14.3]
  • [aws vpc] security groups are uniquely named per VPC [v0.14.4]
  • [aws vpc] added dns recursor to vpc [v0.14.5]
  • added ability to set dns recursor [v0.14.5]

v0.13

  • [openstack] Neutron support - detects that Neutron is available and prompts for which subnet to use
  • [openstack] Boot from volume - prompt for which images should be used (QCOW2 vs RAW) and configure MicroBOSH to use boot_from_volume if RAW format required
  • only create 3 security groups instead of many (fix for new AWS accounts and OpenStack tenants with small quotas)
  • testing for ruby 2.1.0; though BOSH still requires 1.9.3 at time of writing
  • upgrade rspec for 3.0 and using expect/to syntax
  • ignore SSL verification [v0.13.1] - to be made optional in future
  • loosen requirement on cyoi to major version [v0.13.2]

v0.12

  • vSphere support [thanks Matt Stine!!]

v0.11

  • Complete rewrite of bosh-bootstrap in orphan branch
  • CodeClimate score changed from 0.82 to 3.85
  • Initial support for AWS EC2; WIP for OpenStack; initial unit tests for vSphere
  • Interactive Q&A is extracted into cyoi (choose-your-own-infrastructure) library
  • Accessing settings is much cleaner; functionality moved into fork of settingslogic called readwritesettings
  • Inception VM/server is now provisioned via separate CLI project inception-server
  • AWS/us-east-1 uses public AMIs; other regions & other CPIs use stemcells
  • CLI via bosh plugin (bosh bootstrap) rather than a stand alone CLI (bosh-bootstrap)
  • Added ssh action to ssh into the microbosh
  • Added delete actions to delete the microbosh (but not the IP address and security groups)
  • Add back bosh-bootstrap CLI & remove bosh_cli dependency (v0.11.1)
  • Specify which AWS AZ to use via provider.az in settings.yml (v0.11.2)
  • Support for OpenStack (also in cyoi 0.4.3) thanks to Ferdy! (v0.11.3)
  • Ensure CLI loads bundler (v0.11.4)
  • rubygem users should be able to install & run from rubygems instead of source workaround (v0.11.5)
  • microbosh volume is smaller 4G and automatically fits on devstack/openstack (v0.11.5; thx @ryfow)
  • Security group bosh_agent_http renamed to bosh_agent_https, with same 6868 port for talking to bosh_agent running in https mode (bosh_agent_http can then be deleted) (v0.11.5)
  • Add port 53/dns security group (v0.11.6)
  • Port 53 open on UDP only as workaround for multi-region AWS (v0.11.7; thx @yudai)
  • Suppress bundler git "fatal" warnings (by converting ~/.microbosh into git repo) (v0.11.8)
  • Update to newer-er-er stemcell paths from Pivotal's s3 bucket (v0.11.9, v0.11.10)
  • Enlarge persistent disk from 4G to 16G (v0.11.11)
  • bosh_cli gems now on rubygems instead of pivotal s3 bucket (v0.11.12)
  • OpenStack improvements to reduce POST API throttling (v0.11.13)
  • Can now update a running microbosh (thanks @lookitup4me) (v0.11.14)
  • OpenStack uses commonly available m1.medium flavor instead of bespoke m1.microbosh (v0.11.14)
  • Properly enlarge persistent disk from 4G to 16G (v0.11.15)

v0.10

Available on branch v0.10.

Install using:

gem install bosh-bootstrap -v "~> 0.10.0"
  • Only using latest pre-release bosh gems & stemcells/amis - do not upgrade if you want the old 2012 gems
  • AWS us-east-1 uses a pre-built AMI for extra speed
  • AWS all regions are working (using pre-created stemcell)
  • OpenStack is now working (using pre-created stemcell)
  • deploy --create-inception chooses to create an inception VM
  • Using bosh_cli_plugin_micro (for bosh micro) was bosh_deployer
  • bosh-cloudfoundry gem installed with prerelease gems (fix in v0.10.1)
  • AWS inception VM gets its attached volume again (v1.10.2)

v0.9

  • v0.8 wasn't working for many people; and neither will v0.9; but its a move in the right direction.
  • Moving towards new 1.5.0 version of bosh that hasn't come out yet formally.
  • AWS us-east-1 will use a pre-created AMI. It saves about 10-15 minutes!
  • AWS other regions will use a pre-created stemcell. I haven't tested this well yet.
  • OpenStack support is still broken because you need to create your own stemcells and for that you need a 12.10 inception VM and that work isn't quite done yet.

v0.8

  • SSH keys used to access inception VM are now generated and stored within the ~/.bosh_bootstrap/ssh folder. This fixes many issues that many people were having (their keys had passphrases, their fog_default keypair was old). It also allows a manifest file to be shared between people as it contains the private key contents, and the private key file will be recreated if it is missing.
  • existing inception VMs' manifest.yml will be upgraded automatically and a backup file created (just in case)
  • tightening of net-ssh & net-scp gems to ensure the bosh-bootstrap gem can be installed [thx @mmb]
  • preinstall net-ssh/net-scp/fog on inception VM before installing bosh_deployer to fix in ability to install bosh_deployer 1.4.1 due to latest fog 1.10.0 release (v0.8.2)

v0.7

Notable:

  • For existing users: please run "deploy --upgrade-deps" as new inception package (runit) added; and jazor/yaml_command CLIs installed
  • Forces use of microbosh stemcell 0.8.1 which work with public gems (latest public stemcell does not work with public gems)

Added:

  • mosh command - connect to Inception VM on trains over flaky internet connections (use instead of ssh or tmux command) [thx @mrdavidlang]
  • upgrade-inception command - to perform an upgrade of the Inception VM without triggering a re-deploy of microbosh.

Changes:

  • Inception VM now installs rubygems 2.0.0 & bundler 1.3.0
  • Better idempotence for re-deploying microbosh - will delete&deploy after a failure; will deploy after a deletion.
  • Downloads ubuntu 10.04 ISO to speed up custom stemcell builds
  • Using redcard to ensure ruby 1.9 only
  • manifest.yml stores the name of the stemcell created from a custom stemcell build; no longer re-creates stemcell each time
  • git color is enabled on inception VM

Work in progress:

  • AWS VPC support was begin by the core bosh team; though work has stopped sadly.
  • Growing number of specs mostly using Fog.mock! mode; tests being run on travis

v0.7.1

  • Make "deploy --private-key" option work [thx @dpw]
  • Add hypervisor for OpenStack stemcells [thx @frodenas]
  • Don't fail if settings.fog_credentials.openstack_region doesn't exist
  • Fix README for changed location of bosh-release [thx @scottfrederick]
  • No need to show --latest-stemcell in README tutorial

v0.6

Highlights:

Additions:

  • tmux - if you have tmux installed, then you can SSH into inception VM with it (thx @mrdavidlang)
  • started a test suite; its small but growing! (thx @mrdavidlang for getting it started)

Bug fixes:

  • Fog::SSH uses explicit ssh key that was requested to access inception VM

Future thoughts:

  • I hate Settingslogic for read-write settings. It's really only a read-only settings DSL. It puts Ruby classes into the YAML. Probably going to rip it out.
  • I am so sorry I took so long to start writing tests. It always seemed such a hard thing to write tests for. But bosh-cloudfoundry project has had good success with internal tests; so we're migrating those ideas into this project.