test-job.yaml

name: Go-build-and-test

on:
  push:
    branches:
    - master
  pull_request:
    branches: [ master ]

jobs:
  lint:
    name: Lint
    runs-on: ubuntu-latest
    steps:
    - name: Set up Go
      uses: actions/setup-go@v3
      with:
        # Use the same go version with build job
        go-version: '1.20'

    - name: Check out code into the Go module directory
      uses: actions/checkout@v2
      with:
        # When checking out the repository that
        # triggered a workflow, this defaults to the reference or SHA for that event.
        # Default value should work for both pull_request and merge(push) event.
        ref: ${{github.event.pull_request.head.sha}}

    - name: Install goimports and gofumpt
      run: |
        go install golang.org/x/tools/cmd/goimports@latest
        go install mvdan.cc/gofumpt@v0.3.1

    - name: Run gofmt
      uses: Jerome1337/gofmt-action@v1.0.4
      with:
        gofmt-path: 'apiserver cli ray-operator'
        gofmt-flags: '-l -d -s'

    - name: Run linter against ray operator
      uses: golangci/golangci-lint-action@v2
      with:
          # Optional: version of golangci-lint to use in form of v1.2 or v1.2.3 or `latest` to use the latest version
          version: v1.54.1

          # Optional: working directory, useful for monorepos
          working-directory: ./ray-operator

          # Optional: golangci-lint command line arguments.
          # args: --issues-exit-code=0
          args: --timeout=3m

          # Optional: show only new issues if it's a pull request. The default value is `false`.
          # only-new-issues: true

          # Optional: if set to true then the action will use pre-installed Go.
          skip-go-installation: true

          # Optional: if set to true then the action don't cache or restore ~/go/pkg.
          skip-pkg-cache: true

          # Optional: if set to true then the action don't cache or restore ~/.cache/go-build.
          # skip-build-cache: true

    - name: Run linter against apiserver
      uses: golangci/golangci-lint-action@v2
      with:
        version: v1.54.1
        working-directory: ./apiserver
        args: --timeout=3m --exclude='SA1019'
        skip-go-installation: true
        skip-pkg-cache: true

    - name: Run linter against cli
      uses: golangci/golangci-lint-action@v2
      with:
        version: v1.54.1
        working-directory: ./cli
        args: --timeout=3m
        skip-go-installation: true
        skip-pkg-cache: true

    - name: Run goimports
      run: test -z "$(set -o pipefail && $(go env GOPATH)/bin/goimports -l apiserver/ cli/ $(find ./ray-operator -name "*.go" | grep -v zz_generated.deepcopy.go) | tee goimports.out)" || { cat goimports.out && exit 1; }

    - name: Open this to see how to fix goimports if it fails
      run: |
        echo "Run command 'goimports -w apiserver/ cli/ $(find ./ray-operator -name "*.go" | grep -v zz_generated.deepcopy.go)' to correct your code format."
        echo "Proposed format changes:"
        $(go env GOPATH)/bin/goimports -d apiserver/ cli/ $(find ./ray-operator -name "*.go" | grep -v zz_generated.deepcopy.go)
      if: failure()

    - name: Run gofumpt
      run: test -z "$(set -o pipefail && $(go env GOPATH)/bin/gofumpt -l apiserver/ ray-operator/ cli/ | tee gofumpt.out)" || { cat gofumpt.out && exit 1; }

    - name: Open this to see how to fix gofumpt if it fails
      run: |
        echo "Run command 'gofumpt -w apiserver/ ray-operator/ cli/' to correct your code format."
        echo "Proposed format changes:"
        $(go env GOPATH)/bin/gofumpt -d apiserver/ ray-operator/ cli/
      if: failure()

  build_apiserver:
    env:
      working-directory: ./apiserver
      cli-working-directory: ./cli
    name: Build Apiserver, CLI Binaries and Docker Images
    runs-on: ubuntu-latest
    steps:
      - name: Set up Go
        uses: actions/setup-go@v3
        with:
          go-version: '1.20'

      - name: Check out code into the Go module directory
        uses: actions/checkout@v2
        with:
          # When checking out the repository that
          # triggered a workflow, this defaults to the reference or SHA for that event.
          # Default value should work for both pull_request and merge(push) event.
          ref: ${{github.event.pull_request.head.sha}}

      - name: list directories
        working-directory: ${{env.working-directory}}
        run: |
          pwd
          ls -R

      - name: install kubebuilder
        run: |
          wget https://github.com/kubernetes-sigs/kubebuilder/releases/download/v3.0.0/kubebuilder_$(go env GOOS)_$(go env GOARCH)
          sudo mv kubebuilder_$(go env GOOS)_$(go env GOARCH) /usr/local/bin/kubebuilder

      - name: Get revision SHA
        id: vars
        run: echo "::set-output name=sha_short::$(git rev-parse --short HEAD)"

      - name: Get dependencies
        run: go mod download
        working-directory: ${{env.working-directory}}

      - name: Build
        run: go build ./...
        working-directory: ${{env.working-directory}}

      - name: Test
        run: go test ./pkg/... ./cmd/... -race -parallel 4
        working-directory: ${{env.working-directory}}

      - name: Set up Docker
        uses: docker-practice/actions-setup-docker@master

      - name: Build Docker Image - Apiserver
        run: |
          docker build -t kuberay/apiserver:${{ steps.vars.outputs.sha_short }} -f apiserver/Dockerfile .
          docker save -o /tmp/apiserver.tar kuberay/apiserver:${{ steps.vars.outputs.sha_short }}

      - name: Upload Artifact Apiserver
        uses: actions/upload-artifact@v2
        with:
          name: apiserver_img
          path: /tmp/apiserver.tar

      - name: Log in to Docker Hub
        uses: docker/login-action@v2
        with:
          username: ${{ secrets.DOCKER_USERNAME }}
          password: ${{ secrets.DOCKER_PASSWORD }}
        if: contains(fromJson('["refs/heads/master"]'), github.ref)

      - name: Push Apiserver to DockerHub
        run: |
          docker push kuberay/apiserver:${{ steps.vars.outputs.sha_short }};
          docker image tag kuberay/apiserver:${{ steps.vars.outputs.sha_short }} kuberay/apiserver:nightly;
          docker push kuberay/apiserver:nightly
        if: contains(fromJson('["refs/heads/master"]'), github.ref)

      - name: Log in to Quay.io
        uses: docker/login-action@v2
        with:
          registry: quay.io
          username: ${{ secrets.QUAY_USERNAME }}
          password: ${{ secrets.QUAY_ROBOT_TOKEN }}
        if: contains(fromJson('["refs/heads/master"]'), github.ref)

      - name: Push Apiserver to Quay.io
        run: |
          docker image tag kuberay/apiserver:${{ steps.vars.outputs.sha_short }} quay.io/kuberay/apiserver:${{ steps.vars.outputs.sha_short }};
          docker push quay.io/kuberay/apiserver:${{ steps.vars.outputs.sha_short }};
          docker image tag kuberay/apiserver:${{ steps.vars.outputs.sha_short }} quay.io/kuberay/apiserver:nightly;
          docker push quay.io/kuberay/apiserver:nightly
        if: contains(fromJson('["refs/heads/master"]'), github.ref)

      - name: Build CLI
        run: go build -o kuberay -a main.go
        working-directory: ${{env.cli-working-directory}}

  build_operator:
    env:
      working-directory: ./ray-operator
    name: Build Operator Binaries and Docker Images
    runs-on: ubuntu-latest
    steps:

    - name: Set up Go
      uses: actions/setup-go@v3
      with:
        go-version: '1.20'

    - name: Check out code into the Go module directory
      uses: actions/checkout@v2
      with:
        # When checking out the repository that
        # triggered a workflow, this defaults to the reference or SHA for that event.
        # Default value should work for both pull_request and merge(push) event.
        ref: ${{github.event.pull_request.head.sha}}

    - name: list directories
      working-directory: ${{env.working-directory}}
      run: |
        pwd
        ls -R

    - name: install kubebuilder
      run: |
        wget https://github.com/kubernetes-sigs/kubebuilder/releases/download/v3.0.0/kubebuilder_$(go env GOOS)_$(go env GOARCH)
        sudo mv kubebuilder_$(go env GOOS)_$(go env GOARCH) /usr/local/bin/kubebuilder

    - name: Get revision SHA
      id: vars
      run: echo "::set-output name=sha_short::$(git rev-parse --short HEAD)"

    - name: Get dependencies
      run: go mod download
      working-directory: ${{env.working-directory}}

    - name: Build
      run: make build
      working-directory: ${{env.working-directory}}

    - name: Test
      run: make test
      working-directory: ${{env.working-directory}}

    - name: Set up Docker
      uses: docker-practice/actions-setup-docker@master

    - name: Build Docker Image - Operator
      run: |
        IMG=kuberay/operator:${{ steps.vars.outputs.sha_short }} make docker-image
        docker save -o /tmp/operator.tar kuberay/operator:${{ steps.vars.outputs.sha_short }}
      working-directory: ${{env.working-directory}}

    - name: Upload Artifact Operator
      uses: actions/upload-artifact@v2
      with:
        name: operator_img
        path: /tmp/operator.tar

    - name: Log in to Docker Hub
      uses: docker/login-action@v2
      with:
        username: ${{ secrets.DOCKER_USERNAME }}
        password: ${{ secrets.DOCKER_PASSWORD }}
      if: contains(fromJson('["refs/heads/master"]'), github.ref)

    - name: Push Operator to DockerHub
      run: |
        docker push kuberay/operator:${{ steps.vars.outputs.sha_short }};
        docker image tag kuberay/operator:${{ steps.vars.outputs.sha_short }} kuberay/operator:nightly;
        docker push kuberay/operator:nightly
      if: contains(fromJson('["refs/heads/master"]'), github.ref)

    - name: Log in to Quay.io
      uses: docker/login-action@v2
      with:
        registry: quay.io
        username: ${{ secrets.QUAY_USERNAME }}
        password: ${{ secrets.QUAY_ROBOT_TOKEN }}
      if: contains(fromJson('["refs/heads/master"]'), github.ref)

    - name: Push Operator to Quay.io
      run: |
        docker image tag kuberay/operator:${{ steps.vars.outputs.sha_short }} quay.io/kuberay/operator:${{ steps.vars.outputs.sha_short }};
        docker push quay.io/kuberay/operator:${{ steps.vars.outputs.sha_short }};
        docker image tag kuberay/operator:${{ steps.vars.outputs.sha_short }} quay.io/kuberay/operator:nightly;
        docker push quay.io/kuberay/operator:nightly
      if: contains(fromJson('["refs/heads/master"]'), github.ref)

  test-compatibility-2_5_0:
    needs:
      - build_operator
      - build_apiserver
      - lint
    runs-on: ubuntu-latest
    name: Compatibility Test - 2.5.0
    steps:
      - name: Check out code into the Go module directory
        uses: actions/checkout@v2
        with:
          # When checking out the repository that
          # triggered a workflow, this defaults to the reference or SHA for that event.
          # Default value should work for both pull_request and merge(push) event.
          ref: ${{github.event.pull_request.head.sha}}

      - uses: ./.github/workflows/actions/compatibility
        with:
          ray_version: 2.5.0

  test-compatibility-2_6_3:
    needs:
      - build_operator
      - build_apiserver
      - lint
    runs-on: ubuntu-latest
    name: Compatibility Test - 2.6.3
    steps:
      - name: Check out code into the Go module directory
        uses: actions/checkout@v2
        with:
          # When checking out the repository that
          # triggered a workflow, this defaults to the reference or SHA for that event.
          # Default value should work for both pull_request and merge(push) event.
          ref: ${{github.event.pull_request.head.sha}}

      - uses: ./.github/workflows/actions/compatibility
        with:
          ray_version: 2.6.3

  test-compatibility-2_7_0:
    needs:
      - build_operator
      - build_apiserver
      - lint
    runs-on: ubuntu-latest
    name: Compatibility Test - 2.7.0
    steps:
      - name: Check out code into the Go module directory
        uses: actions/checkout@v2
        with:
          # When checking out the repository that
          # triggered a workflow, this defaults to the reference or SHA for that event.
          # Default value should work for both pull_request and merge(push) event.
          ref: ${{github.event.pull_request.head.sha}}

      - uses: ./.github/workflows/actions/compatibility
        with:
          ray_version: 2.7.0

  test-compatibility-2_8_0:
    needs:
      - build_operator
      - build_apiserver
      - lint
    runs-on: ubuntu-latest
    name: Compatibility Test - 2.8.0
    steps:
      - name: Check out code into the Go module directory
        uses: actions/checkout@v2
        with:
          # When checking out the repository that
          # triggered a workflow, this defaults to the reference or SHA for that event.
          # Default value should work for both pull_request and merge(push) event.
          ref: ${{github.event.pull_request.head.sha}}

      - uses: ./.github/workflows/actions/compatibility
        with:
          ray_version: 2.8.0

  test-compatibility-nightly:
    needs:
      - build_operator
      - build_apiserver
      - lint
    runs-on: ubuntu-latest
    name: Compatibility Test - Nightly
    steps:
      - name: Check out code into the Go module directory
        uses: actions/checkout@v2
        with:
          # When checking out the repository that
          # triggered a workflow, this defaults to the reference or SHA for that event.
          # Default value should work for both pull_request and merge(push) event.
          ref: ${{github.event.pull_request.head.sha}}

      - uses: ./.github/workflows/actions/compatibility
        with:
          ray_version: nightly

  python-client-test:
    runs-on: ubuntu-latest
    name: Python Client Test
    steps:
      - name: Set up Docker
        uses: docker-practice/actions-setup-docker@master

      - name: Install Kind
        run: |
          curl -Lo ./kind https://kind.sigs.k8s.io/dl/v0.11.1/kind-linux-amd64
          chmod +x ./kind
          sudo mv ./kind /usr/local/bin/kind
          kind create cluster
        shell: bash

      - name: Checkout Python
        uses: actions/checkout@v2

      - name: Setup Python
        uses: actions/setup-python@v2
        with:
          python-version: '3.x'

      - name: Install package and run unittest for Python client
        working-directory: ./clients/python-client
        run: |
          pip install -e .
          python3 -m unittest discover 'python_client_test/'