READMED.md

Todo

reminder

Send HTML GET request from the py

 curl -X GET http://192.168.42.42:14999/okok

temperature sensor

enable 1-wire in raspi-config
sudo pip3 install w1thermsensor

Setup

add to /etc/wpa_supplicant/:

network={
 scan_ssid=1
 ssid="free wifi"
 psk="qwertzuiop"
}

in /boot

touch ssh in boot folder

open a terminal

sudo apt update && sudo apt upgrade -y

sudo apt install git

git clone https://github.com/Lu-ni/escape-room.git

sudo apt install python3-pip

sudo pip3 install w1thermsensor

sudo rasp-config
 ->inteface -> enable one-wire

sudo apt-get install rpi.gpio

in /etc/dhcpcd.conf add the following to the end of the file.

interface eth0

static ip_address=192.168.0.10/24
static routers=192.168.0.1
static domain_name_servers=192.168.0.1

sudo chmod 644 /lib/systemd/system/sample.service

Step 2 – Configure systemd

Now the unit file has been defined we can tell systemd to start it during the boot sequence :

sudo systemctl daemon-reload
sudo systemctl enable sample.service

Reboot the Pi and your custom service should run: