S1F1-MM.json

{
"Configuration_adv.h" : [
  {
    "op": "CustomVal",
    "searchfor": "E0_AUTO_FAN_PIN",
    "value": "FAN1_PIN",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "CustomVal",
    "searchfor": "RETRACT_LENGTH",
    "value": "1",
    "comment": "MRiscoC Directdrive"
  }
],
"Configuration.h" : [
  {
    "op": "Custom",
    "searchfor": "MOTHERBOARD",
    "mask" : ".*",
    "value": "BOARD_CREALITY_V24S1_301",
    "comment": "Ender 3S1 v301"
  },
  {
    "op": "Custom",
    "searchfor": "X_MIN_ENDSTOP_INVERTING",
    "mask" : "false",
    "value": "true",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Custom",
    "searchfor": "Y_MIN_ENDSTOP_INVERTING",
    "mask" : "false",
    "value": "true",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Custom",
    "searchfor": "Z_MIN_ENDSTOP_INVERTING",
    "mask" : "false",
    "value": "true",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Custom",
    "searchfor": "DEFAULT_AXIS_STEPS_PER_UNIT",
    "mask": "{.*}",
    "value":"{ 80, 80, 400, 424.9 }"
  },
  {
    "op": "Enable",
    "searchfor": "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Disable",
    "searchfor": "USE_PROBE_FOR_Z_HOMING",
    "comment": "Ender3S1 Configs"   
  },
  {
    "op": "Enable",
    "searchfor": "PROBE_MANUALLY",
    "comment": "Ender3S1 Manual mesh version"
  },
  {
    "op": "Custom",
    "searchfor": "NOZZLE_TO_PROBE_OFFSET",
    "mask": "{.*}",
    "value":"{ 0, 0, 0 }",
    "comment": "Ender3S1 Manual mesh use the nozzle as probe"
  },
  {
    "op": "CustomVal",
    "searchfor": "PROBING_MARGIN",
    "value": "25"
  },
  {
    "op": "CustomVal",
    "searchfor": "Z_CLEARANCE_DEPLOY_PROBE",
    "value": "10",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "CustomVal",
    "searchfor": "Z_CLEARANCE_BETWEEN_PROBES",
    "value": "5",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "CustomVal",
    "searchfor": "Z_CLEARANCE_MULTI_PROBE",
    "value": "5",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "CustomVal",
    "searchfor": "Z_PROBE_LOW_POINT",
    "value": "-2",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Enable",
    "searchfor": "MESH_BED_LEVELING",
    "comment": "Ender3S1 Manual Mesh"
  },
  {
    "op": "CustomVal",
    "searchfor": "LEVELING_NOZZLE_TEMP",
    "value": "  175",
    "comment": "Ender3S1 Preheat nozzle without oozing"

  },
  {
    "op": "Custom",
    "searchfor": "FIL_RUNOUT_STATE",
    "mask": "LOW",
    "value":"HIGH",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Disable",
    "searchfor": "FIL_RUNOUT_PULLUP",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Enable",
    "searchfor": "FIL_RUNOUT_PULLDOWN",
    "comment": "Ender3S1 Configs"
  },
    {
    "op": "Custom",
    "searchfor": "NOZZLE_PARK_POINT",
    "mask": "{.*}",
    "value":"{ (X_MAX_POS - 2), (Y_MAX_POS - 2), 20 }"
  },
  {
    "op": "CustomVal",
    "searchfor": "X_BED_SIZE",
    "value": "220"
  },
  {
    "op": "CustomVal",
    "searchfor": "Y_BED_SIZE",
    "value": "220"
  },
  {
    "op": "Custom",
    "searchfor": "X_MIN_POS",
    "mask": ".+",
    "value": "-10",
    "comment": "MRiscoC Stock physical limit"
  },
  {
    "op": "Custom",
    "searchfor": "Y_MIN_POS",
    "mask": ".+",
    "value": "-8",
    "comment": "MRiscoC Stock physical limit"
  },
  {
    "op": "CustomVal",
    "searchfor": "Z_MAX_POS",
    "value": "270"
  },
  {
    "op": "CustomVal",
    "searchfor": "Y_MAX_POS",
    "value": "220"
  },
  {
    "op": "CustomVal",
    "searchfor": "X_MAX_POS",
    "value": "230"
  },
  {
    "op": "CustomVal",
    "searchfor": "DEFAULT_XJERK",
    "value": "5"
  },
  {
    "op": "CustomVal",
    "searchfor": "DEFAULT_YJERK",
    "value": "5"
  },
  {
    "op": "CustomVal",
    "searchfor": "DEFAULT_ZJERK",
    "value": "0.3"
  },
  {
    "op": "CustomVal",
    "searchfor": "GRID_MAX_POINTS_X",
    "value": "4"
  },
  {
    "op": "CustomVal",
    "searchfor": "BED_MAXTEMP",
    "value": "110"
  },
  {
    "op": "CustomVal",
    "searchfor": "DEFAULT_Kp",
    "value": "17.10"
  },
  {
    "op": "CustomVal",
    "searchfor": "DEFAULT_Ki",
    "value": "1.39"
  },
  {
    "op": "CustomVal",
    "searchfor": "DEFAULT_Kd",
    "value": "52.79"
  },
  {
    "op": "CustomVal",
    "searchfor": "DEFAULT_bedKp",
    "value": "54.86"
  },
  {
    "op": "CustomVal",
    "searchfor": "DEFAULT_bedKi",
    "value": "10.06"
  },
  {
    "op": "CustomVal",
    "searchfor": "DEFAULT_bedKd",
    "value": "199.38"
  },
  {
    "op": "Disable",
    "searchfor": "ENDSTOPPULLUPS",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Enable",
    "searchfor": "ENDSTOPPULLUP_ZMIN",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Enable",
    "searchfor": "ENDSTOPPULLUP_ZMIN_PROBE",
    "comment": "Ender3S1 Configs"
  },
  {
    "op": "Enable",
    "searchfor": "PREHEAT_BEFORE_LEVELING"
  },
  {
    "op": "Disable",
    "searchfor": "ABL_BILINEAR_SUBDIVISION",
    "comment": "Ender3S1 Configs, disabled by incompatibility with bed visualizer"
  },
  {
    "op": "CustomVal",
    "searchfor": "BILINEAR_SUBDIVISIONS",
    "value": "5",
    "comment": "Ender3S1 Configs"
  }
],
"Version.h" : [
  {
    "op": "Custom",
    "searchfor": "MACHINE_NAME",
    "mask": ".+",
    "value": "\"Ender3S1\""
  }
]   
}