Close abandoned Wire and I2C issues

[stickbreaker]

@everslick can you close these Issues, they are no longer relevant.

• More than 32 bytes cannot be written via I2C #246 Fixed with RC1
• onReceive in Wire.h? #784 duplicate of I2C Slave not implemented #118
• Erro: I2c serial communcation problem #1093 fixed with RC1
• Wire.Begin(4,0) doesn't seem to work: Can GPIO0 mux with I2C clock(SCL)? #1236 Fixed with RC1, boot strapping pin problem
• ESP32 with Wifi messes up i2c bus reads (MPU6050) #1352 Fixed PR Improve I2C bus recovery of Interrupted READ cycle #1767
• 2 I2C ports #1438 Fixed, user coding error
• DEbug messages when using i2c #1558 Fixed PR Improve I2C bus recovery of Interrupted READ cycle #1767
• Trying to upload voice recognition code, and also helloworld is giving me issues, not sure what to do #1561 this one is just bizarre, it is abandoned and the OP was just acting silly
• i2c speed dropping down #1563 Fixed PR Improve I2C bus recovery of Interrupted READ cycle #1767
• [ESP32] I2C Interrupt problem since uprade to Espressif 1.1.0 #1588 fixed with PR Improve I2C bus recovery of Interrupted READ cycle #1767
• Sensor VEML770 data not change (Wire) #1657 fixed with PR ReSTART fix, with others #1717
• [i2c] MLX90614 #1694 fixed with PR ReSTART fix, with others #1717
• esp32-arduino I2C does not support slave mode? #1697 Duplicate of I2C Slave not implemented #118
• Update IDF to aaf1239 breaks Wire library endTransmission() #1725 request to change Wire.endTransmission(sendStop) parameter to byte, not accepted
• Conflict between accelerometer MPU-9265 and Oled SSD1306 #1778 Problem with user's board/hardware

Chuck.

[everslick]

Will do so the next days... Thanks for your work!

[copercini]

@stickbreaker I closed all the issues on list, thanks for you work and organization =)

[bperrybap]

In #1725 I wasn't asking to change Wire.endTransmission(sendStop) parameter to use a byte parameter.
I was saying that endTransmission(0) and endTransmission(1) should work as it does in every other Arduino core.

[bperrybap]

PR created for issue #1725 : #1888