Skip to content

Latest commit

 

History

History
234 lines (181 loc) · 14.9 KB

WebsocketAPIV3.md

File metadata and controls

234 lines (181 loc) · 14.9 KB
Raw

WebSocket protocol v3 details

WebSocket Protocol v3 requires an Exasol version of at least 7.1.0. It follows the RFC 6455 document of the IETF.

The Exasol connection server identifies the initial GET request by the client. This request contains information about the used protocol version. Depending on this information the matching login and protocol class is chosen.

After the handshake the process is identical to a connection using the standard drivers like JDBC or ODBC: The connection server listens to incoming messages and forwards the requests to the database.

Table of contents

Changes

Date Exasol Version Change Issue
2021.06.22 7.1.0 Autocommit was enabled by default for sessions in Exasol 7.1+. See Attributes for details.
Autocommit can be disabled in order to restore the previous behavior. Please see the driver's documentation on how to do this.		 EXASOL-2908
2021.05.18 7.1.0 OpenID Connect support was added as a login option. See loginToken and subLoginToken for details.
To login using an OpenID refresh token in compatibility mode, see login and subLogin.		 EXASOL-2867

Command summary

Connection-related commands

The following commands are used to connect to Exasol, disconnect from Exasol, and query the hosts of an Exasol cluster.

Command Description
disconnect Closes a connection to Exasol
enterParallel Opens subconnections for parallel execution
⚠️ Deprecated, please use requestParallelConnections instead.
getHosts Gets the hosts in a cluster
login Establishes a connection to Exasol
loginToken Establishes a connection to Exasol using an OpenID token
subLogin Establishes a subconnection to Exasol
subLoginToken Establishes a subconnection to Exasol using an OpenID token

Session-related commands

The following commands are used for actions that a user would typically perform after an Exasol session has been established. These commands are responsible for executing queries and statements, reading result sets, and getting and setting session attributes.

Command Description
abortQuery Aborts a running query
closePreparedStatement Closes a prepared statement
closeResultSet Closes a result set
createPreparedStatement Creates a prepared statement
execute Executes an SQL statement
executeBatch Executes multiple SQL statements as a batch
executePreparedStatement Executes a prepared statement
fetch Retrieves data from a result set
getAttributes Gets the session attribute values
getOffset Gets the row offset of a result set
getResultSetHeader Gets a result set header
setAttributes Sets the given session attribute values

Metadata-related commands

The following commands are used to query metadata in Exasol. The commands and their behavior are very similar to methods in the JDBC standard.

Command Description
getColumnPrivileges Gets column privilege descriptions
getColumns Gets column descriptions
getConnections Gets connection descriptions
getFunctions Gets function descriptions
getKeywords Gets SQL keywords
getPrimaryKeys Gets primary key descriptions
getProperties Gets database properties
getRoles Gets role descriptions
getSchemas Gets schema descriptions
getScripts Gets script descriptions
getTablePrivileges Gets table privilege descriptions
getTables Gets table descriptions
getTableTypes Gets supported table types
getTypeInfo Gets supported data types
getUsers Gets user descriptions

Attributes: Session and database properties

Attributes can be queried with the getAttributes command and some of them can be modified with the setAttributes command. Modified attributes are included in command replies.

Name JSON value Read-only Committable Description
autocommit true | false no no If true, commit() will be executed automatically after each statement. If false, commit() and rollback() must be executed manually.
compressionEnabled true | false yes no If true, the WebSocket data frame payload data is compressed. If false, it is not compressed.
currentSchema string no yes Current schema name
dateFormat string yes yes Date format
dateLanguage string yes yes Language used for the day and month of dates.
datetimeFormat string yes yes Timestamp format
defaultLikeEscapeCharacter string yes yes Escape character in LIKE expressions.
feedbackInterval number no no Time interval (in seconds) specifying how often heartbeat/feedback packets are sent to the client during query execution.
numericCharacters string no yes Characters specifying the group and decimal separators (NLS_NUMERIC_CHARACTERS). For example, ",." would result in "123,456,789.123".
openTransaction true | false yes no If true, a transaction is open. If false, a transaction is not open.
queryTimeout number no yes Query timeout value (in seconds). If a query runs longer than the specified time, it will be aborted.
resultSetMaxRows number no no Maximum number of result set rows returned, 0 (default) means no limit. Only applicable to execute, executeBatch and executePreparedStatement.
snapshotTransactionsEnabled true | false no no If true, snapshot transactions will be used. If false, they will not be used.
timestampUtcEnabled true | false no no If true, timestamps will be converted to UTC. If false, UTC will not be used.
timezone string yes yes Timezone of the session.
timeZoneBehavior string yes yes Specifies the conversion behavior of UTC timestamps to local timestamps when the time value occurs during a time shift because of daylight saving time (TIME_ZONE_BEHAVIOR).

Attributes are specified as an object of name/value pairs. Multiple attributes are separated by a comma.

Attribute JSON format

 {
     // name: value
     <string>: <string | number | true | false>
 }

Data Types: Type names and properties

The following data types and properties can be used to specify column types in the executePreparedStatement request.

Type Required Properties Optional Properties
BOOLEAN
CHAR size
DATE
DECIMAL precision, scale
DOUBLE
GEOMETRY
HASHTYPE
INTERVAL DAY TO SECOND precision, fraction
INTERVAL YEAR TO MONTH precision
TIMESTAMP withLocalTimeZone
TIMESTAMP WITH LOCAL TIME ZONE withLocalTimeZone
VARCHAR size

The following data types and properties are used to specify column types in responses from Exasol.

Type Properties
BOOLEAN
CHAR size, characterSet
DATE size
DECIMAL precision, scale
DOUBLE
GEOMETRY size, srid
HASHTYPE size
INTERVAL DAY TO SECOND size, precision, fraction
INTERVAL YEAR TO MONTH size, precision
TIMESTAMP size, withLocalTimeZone
TIMESTAMP WITH LOCAL TIME ZONE size, withLocalTimeZone
VARCHAR size, characterSet

Compression

The data in the WebSocket data frames may be compressed using zlib. In order to enable compression, the client must set the useCompression field in the login command to true. If compression is enabled during login, all messages sent and received after login completion must be binary data frames, in which the payload data (i.e., command request/response) is zlib-compressed.

Heartbeat/Feedback messages

The feedbackInterval session attribute specifies how often (in seconds) unidirectional heartbeat/feedback messages are sent to the client during query execution. These messages are sent using Pong WebSocket control frames (see RFC 6455), and thus a response is not expected.

The client may send Ping WebSocket control frames (see RFC 6455) to Exasol, for example, as client-initiated keepalives. Exasol will respond to a Ping frame with a Pong response.

Exasol will not send Ping frames to the client.

Subconnections

Introduction

Subconnections are additional connections to Exasol cluster nodes which can be created by the client. There are two main reasons to create and use subconnections.

  1. Read a result set in parallel: fetch can be called in parallel by each of the subconnections to read a result set.
  2. INSERT data in parallel: executePreparedStatement can be called in parallel on each of the subconnections to INSERT various data. Please note that the same prepared statement (see createPreparedStatement) must be executed on all subconnections.

Here, parallel refers to the node-wise reading/inserting of data. For example, if there is a subconnection for each node (i.e., the number of subconnections equals the number of cluster nodes), then each subconnection will read/insert data locally from/into its node.

Fetching a result set from Exasol can be done easily using the main connection. In this scenario, the Exasol cluster nodes will automatically send their data to the node which is connected to the client. This node then sends the combined data as a single result set. Thus, the client does not need to be aware of any data sharing/communication among the Exasol cluster nodes.

However, for performance-critical scenarios, a significant performance gain can be acheived by using subconnections to fetch/insert data directly from/into multiple Exasol cluster nodes in parallel. Thus, instead of all the data going through the single main connection, the data can flow through multiple subconnections from/to different Exasol nodes in parallel.

Please note that subconnections are only useful for multi-node Exasol clusters. With a single-node Exasol instance, the subconnection would basically be a duplicate of the main connection.

How to create and use subconnections

Subconnections are created using the enterParallel command. The number of requested subconnections can be specified by the user, and the number of subconnections actually opened is given in the enterParallel response. Please note that the maximum number of subconnections is equal to the number of nodes in the Exasol cluster. For example, if the user has an eight-node cluster and requests 1,000 subconnections, only eight subconnections will be opened. As a general rule, the number of subconnections should usually be equal to the number of nodes in the Exasol cluster, which ensures one subconnection per node. After the subconnections have been created, the subLogin or subLoginToken command should be used to login to each subconnection. Note: Failing to login to all subconnections will cause the login to hang. After this, they are ready for use.

⚠️ Please note: autocommit should be disabled before opening any subconnections. After closing the subconnections, it can be re-enabled.

Any command can be executed on subconnections; however, there is a significant difference in how they can be executed. The only two commands which can be executed ansynchronously on subconnections (i.e., not executed on all subconnections at the same time) are fetch and executePreparedStatement. All other commands are synchronous, meaning the same command must be executed on all subconnections at the same time. For example, if the execute command is not called on all subconnections, the call will hang and eventually fail because of a time out.

⚠️ Please note: different statements cannot be run in parallel using subconnections.

After a subconnection is no longer needed, the disconnect command should be called and the WebSocket for it closed as normal. Please note that subconnections can be reused for multiple statements.

Example

The following is an example of how to create, use, and close subconnections to fetch a result set from an executed prepared statement. If subconnections have already been created or are needed afterwards, the enterParallel, subLogin, and disconnect commands may be ignored.

  1. On main connection:

  2. On subconnections:

  3. On main connection:

  4. On subconnections:

  5. On main connection: