From 0b47558a09ab4b21a11bff330b53818557522ffc Mon Sep 17 00:00:00 2001 From: chzj333 <53591189+chzj333@users.noreply.github.com> Date: Tue, 20 Aug 2019 16:05:12 +0800 Subject: [PATCH] New board STM32F407 (#14994) --- Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp | 23 +- Marlin/src/core/boards.h | 1 + Marlin/src/pins/pins.h | 2 + .../src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h | 254 ++++++++++++++++++ .../PlatformIO/boards/BigTree_Btt002.json | 65 +++++ platformio.ini | 24 +- 6 files changed, 358 insertions(+), 11 deletions(-) create mode 100644 Marlin/src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h create mode 100644 buildroot/share/PlatformIO/boards/BigTree_Btt002.json diff --git a/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp b/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp index b2df7a16a7f8..b2e1ebc17559 100644 --- a/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp +++ b/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp @@ -22,7 +22,6 @@ */ #if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) - #include "../../inc/MarlinConfig.h" #include @@ -73,16 +72,22 @@ void spiInit(uint8_t spiRate) { // Use datarates Marlin uses uint32_t clock; switch (spiRate) { - case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000 - case SPI_HALF_SPEED: clock = 5000000; break; - case SPI_QUARTER_SPEED: clock = 2500000; break; - case SPI_EIGHTH_SPEED: clock = 1250000; break; - case SPI_SPEED_5: clock = 625000; break; - case SPI_SPEED_6: clock = 300000; break; - default: - clock = 4000000; // Default from the SPI library + case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000 + case SPI_HALF_SPEED: clock = 5000000; break; + case SPI_QUARTER_SPEED: clock = 2500000; break; + case SPI_EIGHTH_SPEED: clock = 1250000; break; + case SPI_SPEED_5: clock = 625000; break; + case SPI_SPEED_6: clock = 300000; break; + default: + clock = 4000000; // Default from the SPI library } spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0); + #if defined(MISO_PIN) && defined(SDSS) && defined(MOSI_PIN) && defined(SCK_PIN) + SPI.setMISO(MISO_PIN); + SPI.setSSEL(SDSS); + SPI.setMOSI(MOSI_PIN); + SPI.setSCLK(SCK_PIN); + #endif SPI.begin(); } diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 7d02566247dc..4891ac0f07bd 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -290,6 +290,7 @@ #define BOARD_BLACK_STM32F407ZE 4205 // BLACK_STM32F407ZE #define BOARD_STEVAL 4206 // STEVAL-3DP001V1 3D PRINTER BOARD #define BOARD_BIGTREE_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG) +#define BOARD_BIGTREE_BTT002_V1_0 4208 // BigTreeTech BTT002 v1.0 (STM32F407VE) // // ARM Cortex M7 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index b0ac65528656..0cffa5988054 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -502,6 +502,8 @@ #include "stm32/pins_STEVAL.h" // STM32F4 env:STM32F4 #elif MB(BIGTREE_SKR_PRO_V1_1) #include "stm32/pins_BIGTREE_SKR_PRO_V1.1.h" // STM32F4 env:BIGTREE_SKR_PRO +#elif MB(BIGTREE_BTT002_V1_0) + #include "stm32/pins_BIGTREE_BTT002_V1.0.h" // STM32F4 env:BIGTREE_BTTOO2 // // ARM Cortex M7 diff --git a/Marlin/src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h b/Marlin/src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h new file mode 100644 index 000000000000..213ddd1a63a4 --- /dev/null +++ b/Marlin/src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h @@ -0,0 +1,254 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#ifndef TARGET_STM32F4 + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 3 || E_STEPPERS > 3 + #error "BIGTREE SKR Pro V1.1 supports up to 3 hotends / E-steppers." +#endif + +#define BOARD_NAME "BIGTREE Btt002 1.0" + +#define SRAM_EEPROM_EMULATION + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Servos +// +#define SERVO0_PIN PC3 + +// +// Limit Switches +// +#define X_MIN_PIN PD3 +#define X_MAX_PIN PD3 +#define Y_MIN_PIN PD2 +#define Y_MAX_PIN PD2 +#define Z_MIN_PIN PD1 +#define Z_MAX_PIN PD1 + +// +// Z Probe must be this pins ## +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN PD1 +#endif + +// +// Steppers +// +#define X_STEP_PIN PA9 +#define X_DIR_PIN PA10 +#define X_ENABLE_PIN PA8 +#ifndef X_CS_PIN + #define X_CS_PIN PE2 +#endif + +#define Y_STEP_PIN PC8 +#define Y_DIR_PIN PC9 +#define Y_ENABLE_PIN PC7 + #ifndef Y_CS_PIN + #define Y_CS_PIN PE3 +#endif + +#define Z_STEP_PIN PD15 +#define Z_DIR_PIN PC6 +#define Z_ENABLE_PIN PD14 +#ifndef Z_CS_PIN + #define Z_CS_PIN PE4 +#endif + +#define E0_STEP_PIN PD12 +#define E0_DIR_PIN PD13 +#define E0_ENABLE_PIN PD11 +#ifndef E0_CS_PIN + #define E0_CS_PIN PD7 +#endif + +/* +//SKR_PRO_V1.1 +#define E1_STEP_PIN PD15 +#define E1_DIR_PIN PE7 +#define E1_ENABLE_PIN PA3 +#ifndef E1_CS_PIN + #define E1_CS_PIN PG15 +#endif + +#define E2_STEP_PIN PD13 +#define E2_DIR_PIN PG9 +#define E2_ENABLE_PIN PF0 +#ifndef E2_CS_PIN + #define E2_CS_PIN PG12 +#endif +*/ +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PB15 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB14 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB13 + #endif +#endif + +#if HAS_TMC220x + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial ## + // + #define X_SERIAL_TX_PIN PE2 + #define X_SERIAL_RX_PIN PE2 + + #define Y_SERIAL_TX_PIN PE3 + #define Y_SERIAL_RX_PIN PE3 + + #define Z_SERIAL_TX_PIN PE4 + #define Z_SERIAL_RX_PIN PE4 + + #define E0_SERIAL_TX_PIN PD7 + #define E0_SERIAL_RX_PIN PD7 + + //#define E1_SERIAL_TX_PIN PD1 + //#define E1_SERIAL_RX_PIN PD1 + + //#define E2_SERIAL_TX_PIN PD6 + //#define E2_SERIAL_RX_PIN PD6 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA2 // T1 <-> E0 +#define TEMP_1_PIN PA0 // T2 <-> E1 +//#define TEMP_2_PIN PC2 // T3 <-> E2 SKR_PRO +#define TEMP_BED_PIN PA1 // T0 <-> Bed + +// +// Heaters / Fans +// +#define HEATER_0_PIN PE6 // Heater0 +//#define HEATER_1_PIN PD14 // Heater1 +//#define HEATER_2_PIN PB0 // Heater1 +#define HEATER_BED_PIN PE5 // Hotbed +#define FAN_PIN PB9 // Fan0 +#define FAN1_PIN PB8 // Fan1 +//#define FAN2_PIN PE6 // Fan2 + +// HAL SPI pins group +#define SCK_PIN PA5 // SPI SCLK +#define MYSSEL PA4 // SPI SSEL +#define MISO_PIN PA6 // SPI MISO +#define MOSI_PIN PA7 // SPI MOSI + +// +// Misc. Functions +// +#define SDSS PA4 + +/** + * -------------------------------------SKR_MK3----------------------------------------------- + * _____ _____ | + * PA3 | · · | GND 5V | · · | GND | + * NRESET | · · | PC4(SD_DET) (LCD_D7) PE13 | · · | PE12 (LCD_D6) | + * (MOSI)PA7 | · · | PB0(BTN_EN2) (LCD_D5) PE11 | · · | PE10 (LCD_D4) | + * (SD_SS)PA4 | · · | PC5(BTN_EN1) (LCD_RS) PE8 | · · | PE9 (LCD_EN) | + * (SCK)PA5 | · · | PA6(MISO) (BTN_ENC) PB1 | · · | PE7 (BEEPER) | + * ￣￣ ￣￣ | + * EXP2 EXP1 | + * --------------------------------------------------------------------------------------------- + */ +// +// LCDs and Controllers +// +#if HAS_SPI_LCD + #define BEEPER_PIN PE7 + #define BTN_ENC PB1 + + #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS PE12 + + #define BTN_EN1 PE9 + #define BTN_EN2 PE10 + + #define LCD_PINS_ENABLE PE13 + #define LCD_PINS_D4 PE11 + + #else + + #define LCD_PINS_RS PE8 + + #define BTN_EN1 PC5 + #define BTN_EN2 PB0 + #define SD_DETECT_PIN PC4 + + #define LCD_SDSS PA4 + + #define LCD_PINS_ENABLE PE9 + #define LCD_PINS_D4 PE10 + + #if ENABLED(ULTIPANEL) + #define LCD_PINS_D5 PE11 + #define LCD_PINS_D6 PE12 + #define LCD_PINS_D7 PE13 + #endif + + #endif + + // Alter timing for graphical display + #if HAS_GRAPHICAL_LCD + #ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(600) + #endif + #endif + +#endif // HAS_SPI_LCD diff --git a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json new file mode 100644 index 000000000000..95de3a6bcb9a --- /dev/null +++ b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json @@ -0,0 +1,65 @@ +{ + "build": { + "core": "stm32", + "cpu": "cortex-m4", + "extra_flags": "-DSTM32F407xx", + "f_cpu": "168000000L", + "hwids": [ + [ + "0x1EAF", + "0x0003" + ], + [ + "0x0483", + "0x3748" + ] + ], + "ldscript": "stm32f407xg.ld", + "mcu": "stm32f407vet6", + "variant": "BIGTREE_GENERIC_STM32F407_5X" + }, + "debug": { + "jlink_device": "STM32F407VE", + "openocd_target": "stm32f4x", + "svd_path": "STM32F40x.svd", + "tools": { + "stlink": { + "server": { + "arguments": [ + "-f", + "scripts/interface/stlink.cfg", + "-c", + "transport select hla_swd", + "-f", + "scripts/target/stm32f4x.cfg", + "-c", + "reset_config none" + ], + "executable": "bin/openocd", + "package": "tool-openocd" + } + } + } + }, + "frameworks": [ + "arduino", + "stm32cube" + ], + "name": "STM32F407VE (64k RAM. 512k Flash)", + "upload": { + "disable_flushing": false, + "maximum_ram_size": 65536, + "maximum_size": 524288, + "protocol": "stlink", + "protocols": [ + "stlink", + "dfu", + "jlink" + ], + "require_upload_port": true, + "use_1200bps_touch": false, + "wait_for_upload_port": false + }, + "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html", + "vendor": "Generic" +} diff --git a/platformio.ini b/platformio.ini index e04d369393d8..c4d20e9c986f 100644 --- a/platformio.ini +++ b/platformio.ini @@ -477,6 +477,26 @@ lib_ignore = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster src_filter = ${common.default_src_filter} + monitor_speed = 250000 +# +# BIGTREE_SKR_BTT002 (STM32F407VET6 ARM Cortex-M4) +# +[env:BIGTREE_BTT002] +platform = ststm32@5.4.3 +framework = arduino +board = BigTree_BTT002 +extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +build_flags = ${common.build_flags} + -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407VE\" + -DTARGET_STM32F4 -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000 + -DHAVE_HWSERIAL2 + -DHAVE_HWSERIAL3 + -DPIN_SERIAL2_RX=PD_6 + -DPIN_SERIAL2_TX=PD_5 +lib_deps = ${common.lib_deps} +lib_ignore = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster +src_filter = ${common.default_src_filter} + +monitor_speed = 250000 + # # Teensy 3.1 / 3.2 (ARM Cortex-M4) # @@ -516,7 +536,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py -DMCU_ST -DDEBUG_LEVEL=0 src_filter = ${common.default_src_filter} + #- -lib_ignore = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, TMC26XStepper, U8glib-HAL +lib_ignore = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL # # Espressif ESP32 @@ -531,7 +551,7 @@ upload_port = /dev/ttyUSB0 lib_deps = AsyncTCP=https://github.com/me-no-dev/AsyncTCP/archive/master.zip ESPAsyncWebServer=https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip -lib_ignore = TMC26XStepper, LiquidCrystal, LiquidTWI2, SailfishLCD, SailfishRGB_LED +lib_ignore = LiquidCrystal, LiquidTWI2, SailfishLCD, SailfishRGB_LED src_filter = ${common.default_src_filter} + #