diff --git a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
index 20b6a24891de..2f12a7f946a4 100644
--- a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
+++ b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
@@ -74,7 +74,8 @@
 #define UC1701_V5_RATIO(N)       (0x20 | ((N) & 0x7))
 #define UC1701_CONTRAST(N)       (0x81), (N)
 
-#define UC1701_COLUMN_ADR(N)     (0x10 | (((N) >> 4) & 0xF)), ((N) & 0xF)
+#define UC1701_COLUMN_HI(N)      (0x10 | (((N) >> 4) & 0xF))
+#define UC1701_COLUMN_ADR(N)     UC1701_COLUMN_HI(N), ((N) & 0xF)
 #define UC1701_PAGE_ADR(N)       (0xB0 | (N))
 #define UC1701_START_LINE(N)     (0x40 | (N))
 #define UC1701_INDICATOR(N)      (0xAC), (N)
@@ -83,43 +84,57 @@
 #define UC1701_BOOST_RATIO(N)    (0xF8), (N)
 
 static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = {
-  U8G_ESC_CS(0),              /* disable chip */
-  U8G_ESC_ADR(0),             /* instruction mode */
-  U8G_ESC_RST(1),             /* do reset low pulse with (1*16)+2 milliseconds */
-  U8G_ESC_CS(1),              /* enable chip */
-
-  UC1701_RESET(),             /* soft reset */
-  UC1701_START_LINE(0),       /* set display start line to 0 */
-  UC1701_ADC_REVERSE(0),      /* ADC set to reverse */
-  UC1701_OUT_MODE(1),         /* common output mode */
-  UC1701_INVERTED(0),         /* display normal, bit val 0: LCD pixel off. */
-  UC1701_BIAS_MODE(0),        /* LCD bias 1/9 */
-  UC1701_POWER_CONTROL(0x7),  /* all power control circuits on */
-  UC1701_BOOST_RATIO(0x0),    /* set booster ratio to 4x */
-  UC1701_V5_RATIO(3),         /* set V0 voltage resistor ratio to large */
-  UC1701_CONTRAST(0x27),      /* set contrast */
-  UC1701_INDICATOR(0),        /* indicator */
-  UC1701_ON(1),               /* display on */
-
-  U8G_ESC_CS(0),              /* disable chip */
-  U8G_ESC_DLY(100),           /* delay 100 ms */
-  U8G_ESC_CS(1),              /* enable chip */
-
-  UC1701_ALL_PIX(1),          /* display all points, ST7565 */
-  U8G_ESC_CS(0),              /* disable chip */
-  U8G_ESC_DLY(100),           /* delay 100 ms */
-  U8G_ESC_DLY(100),           /* delay 100 ms */
-  U8G_ESC_CS(1),              /* enable chip */
-  UC1701_ALL_PIX(0),          /* normal display */
-  U8G_ESC_CS(0),              /* disable chip */
-  U8G_ESC_END                 /* end of sequence */
+  U8G_ESC_CS(0),              // disable chip
+  U8G_ESC_ADR(0),             // instruction mode
+  U8G_ESC_RST(1),             // do reset low pulse with (1*16)+2 milliseconds
+  U8G_ESC_CS(1),              // enable chip
+
+  UC1701_RESET(),             // soft reset
+  UC1701_START_LINE(0),       // set display start line to 0
+  UC1701_ADC_REVERSE(0),      // ADC set to reverse
+  UC1701_OUT_MODE(1),         // common output mode
+  UC1701_INVERTED(0),         // display normal, bit val 0: LCD pixel off
+  UC1701_BIAS_MODE(0),        // LCD bias 1/9
+  UC1701_POWER_CONTROL(0x7),  // all power control circuits on
+  UC1701_BOOST_RATIO(0x0),    // set booster ratio to 4x
+  UC1701_V5_RATIO(3),         // set V0 voltage resistor ratio to large
+  UC1701_CONTRAST(0x27),      // set contrast
+  UC1701_INDICATOR(0),        // indicator disable
+  UC1701_ON(1),               // display on
+
+  U8G_ESC_CS(0),              // disable chip
+  U8G_ESC_DLY(100),           // delay 100 ms
+  U8G_ESC_CS(1),              // enable chip
+
+  UC1701_ALL_PIX(1),          // display all points, ST7565
+  U8G_ESC_CS(0),              // disable chip
+  U8G_ESC_DLY(100),           // delay 100 ms
+  U8G_ESC_DLY(100),           // delay 100 ms
+  U8G_ESC_CS(1),              // enable chip
+  UC1701_ALL_PIX(0),          // normal display
+  U8G_ESC_CS(0),              // disable chip
+  U8G_ESC_END                 // end of sequence
 };
 
 static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
-  U8G_ESC_ADR(0),             /* instruction mode */
-  U8G_ESC_CS(1),              /* enable chip */
-  UC1701_COLUMN_ADR(0),       /* address 0 */
-  U8G_ESC_END                 /* end of sequence */
+  U8G_ESC_ADR(0),             // instruction mode
+  U8G_ESC_CS(1),              // enable chip
+  #if ENABLED(MKS_MINI_12864)
+    UC1701_START_LINE(0),     // set display start line to 0
+    UC1701_ADC_REVERSE(0),    // ADC set to reverse
+    UC1701_OUT_MODE(1),       // common output mode
+    UC1701_INVERTED(0),       // display normal, bit val 0: LCD pixel off
+    UC1701_BIAS_MODE(0),      // LCD bias 1/9
+    UC1701_POWER_CONTROL(0x7),// all power control circuits on
+    UC1701_BOOST_RATIO(0x0),  // set booster ratio to 4x
+    UC1701_V5_RATIO(3),       // set V0 voltage resistor ratio to large
+    UC1701_INDICATOR(0),      // indicator disable
+    UC1701_ON(1),             // display on
+    UC1701_COLUMN_HI(0),      // set upper 4 bit of the col adr to 0
+  #else
+    UC1701_COLUMN_ADR(0),     // address 0
+  #endif
+  U8G_ESC_END                 // end of sequence
 };
 
 uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {