CMakeLists-vs2013.txt

#
# CMakeLists.txt --- CMake input file for linrad
#
# Copyright (c) 2014 Juergen Kahrs
#
# Permission is hereby granted, free of charge, to any person 
# obtaining a copy of this software and associated documentation 
# files (the "Software"), to deal in the Software without restriction, 
# including without limitation the rights to use, copy, modify, 
# merge, publish, distribute, sublicense, and/or sell copies of 
# the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be 
# included in all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 
# OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 
# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE 
# OR OTHER DEALINGS IN THE SOFTWARE.

## process this file with CMake to produce Makefile

# Support for NASM is available only with CMake 2.8.8 or later.
cmake_minimum_required (VERSION 2.6)
project (linrad)

# Read file vernr.h and extract the parts of the version number.
FILE(   READ  vernr.h VERNR_H )
STRING( REGEX MATCH   "PROGRAM_NAME \"Linrad-[0-9][0-9].[0-9][0-9]" LINRAD_VERSION        "${VERNR_H}")
STRING( REGEX REPLACE "PROGRAM_NAME \"Linrad-"                  ""  LINRAD_VERSION        "${LINRAD_VERSION}")
STRING( REGEX REPLACE "([0-9][0-9]).[0-9][0-9]"              "\\1"  LINRAD_MAJOR_VERSION  "${LINRAD_VERSION}")
STRING( REGEX REPLACE "[0-9][0-9].([0-9][0-9])"              "\\1"  LINRAD_MINOR_VERSION  "${LINRAD_VERSION}")
STRING( REGEX REPLACE "[0-9][0-9].[0-9][0-9](.*)"            "\\1"  LINRAD_BUGFIX_VERSION "${LINRAD_VERSION}")

include(CheckIncludeFile)
include(CheckTypeSize)
include(CheckLibraryExists)
include(CheckPrototypeDefinition)
set(CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/cmake")
# Set build type. We do this only to prevent compile flag -O3.
set(CMAKE_BUILD_TYPE Debug)

# Create empty files to be included by the .c sources.
# Instead of using these files we will set auto-detected definitions below.
file(WRITE ${CMAKE_SOURCE_DIR}/conf.h  "/* empty file, all settings defined by CMake. */\n" )
file(WRITE ${CMAKE_SOURCE_DIR}/lconf.h "/* empty file, all settings defined by CMake. */\n" )

set(EXTRA_LIBS "")
set(EXTRA_LIB_LOC "")

#set(CMAKE_THREAD_PREFER_PTHREAD 1)
#include(FindThreads)
#if (NOT CMAKE_USE_PTHREADS_INIT)
#  message(STATUS " Couldn't find pthreads")
#endif()

#file(WRITE ${CMAKE_SOURCE_DIR}/conf.h  "#include <sys/ioctl.h>\n" )
#file(WRITE ${CMAKE_SOURCE_DIR}/lconf.h "#include <sys/ioctl.h>\n" )
file(WRITE ${CMAKE_SOURCE_DIR}/conf.h  "\n" )
file(WRITE ${CMAKE_SOURCE_DIR}/lconf.h "\n" )

add_definitions(-DSHM_INSTALLED=0)
add_definitions(-DOPENCL_PRESENT=0)
set(OPENCL_FOUND 0)

add_definitions(-DOSNUM=2)
add_definitions(-DDARWIN=0)
add_definitions(-DIA64=0)

# Set CPU to ARM regardless of actual platform.
# This is necessary to avoid the usage of assembly language sources.
set (CPU "CPU_ARM")
message(STATUS "Found CPU type \"${CMAKE_SYSTEM_PROCESSOR}\" on target system")
add_definitions(-DCPU=${CPU})
add_definitions(-DALSA_LIBNAME=\"asound\")
add_definitions(-DFTDI_LIBNAME=\"ftdi\")
add_definitions(-DLIBUSB0_LIBNAME=\"loadusb\")
add_definitions(-DLIBUSB1_LIBNAME=\"libusb-1.0\")
add_definitions(-DUDEV_LIBNAME=\"libudev\")
add_definitions(-DBLADERF_LIBNAME=\"bladeRF\")
add_definitions(-DMIRISDR_LIBNAME=\"mirisdr\")
add_definitions(-DPERSEUS_LIBNAME=\"perseus-sdr\")
add_definitions(-DRTLSDR_LIBNAME=\"rtlsdr\")
add_definitions(-DFDMS1_LIBNAME=\"fdms1\")
add_definitions(-DAIRSPY_LIBNAME=\"airspy\")
add_definitions(-DPORTAUDIO_PRESENT=0)
add_definitions(-DPA_LINUX_REALTIME=0)
add_definitions(-DPA_LIBNAME=\"portaudio\")
add_definitions(-DHAVE_OSS=0)
add_definitions(-DSOFT66_LIBNAME=\"soft66\")
add_definitions(-DPCI_LIBNAME=\"wd_dask\")

# This list of files should be sorted later
# so that the sequence makes sense to a reader.
set (LINRAD_SOURCES
  ui.c
  uivar.c
  screen.c
  mouse.c
  fonts.c
  screenvar.c
  screensub.c
  sigvar.c
  modesub.c
  palette.c
  extio.c
  thrvar.c
  tx.c
  txssb.c
  txvar.c
  hwaredriver.c
  wide_graph.c
  pol_graph.c
  afc_graph.c
  afcsub.c
  coh_osc.c
  network.c
  eme.c
  help.c
  wxsys.c
  keyboard_var.c
  powtvar.c
  powtim.c
  tx_graph.c
  fft0.c
  fft1.c
  fft1_re.c
  fft2.c
  fft3.c
  fft3var.c
  llsqvar.c
  fft1var.c
  fft2var.c
  fft3var.c
  calvar.c
  caliq.c
  calsub.c
  selvar.c
  buf.c
  blnkvar.c
  coherent.c
  cohsub.c
  freq_control.c
  gifsave.c
  calsub2.c
  llsq.c
  cwspeed.c
  cwdetect.c
  sdrip.c
  sdrvar.c
  baseb_graph.c
  wse.c
  hires_graph.c
  meter_graph.c
  rxin.c
  rxout.c
  wcw.c
  mix1.c
  menu.c
  tune.c
  morse.c
  calibrate.c
  spur.c
  spursub.c
  timing.c
  excalibur.c
  sdr14.c
  radar.c
  timf2.c
  pavar.c
  blank1.c
  mix2.c
  fm.c
  adtest.c
  perseus.c
  sellim.c
  txtest.c
  elektor.c
  fcdpp.c
  si570.c
  usb2lpt.c
  rtl2832.c
  bladerf.c
  mirics.c
  pcie9842.c
  pa.c
  hwaredriver.c
  openhpsdr.c
  httpd.c
  afedri.c
  soft66.c
  affinity.c
  loadusb.c
  elad.c
  airspy.c
  soundcard.c
)
 
#  set(LINRAD_SOURCES ${LINRAD_SOURCES} html_server.c)
#  add_definitions(-DSERVER=1)

add_definitions(-DLUSERS_ROUTINES_PRESENT=0)
add_definitions(-DWUSERS_ROUTINES_PRESENT=0)
add_definitions(-DLUSERS_DEFINES_PRESENT=0)
add_definitions(-DWUSERS_DEFINES_PRESENT=0)
add_definitions(-DUSERS_EXTRA_PRESENT=0)

add_definitions(-D_CRT_SECURE_NO_WARNINGS)

#set(LINRAD_SOURCES ${LINRAD_SOURCES} split.s fft2mmxa.s fft2mmxb.s fft2mmxc.s fftasm.s getiq.s simdasm.s hware.s  )
set(LINRAD_SOURCES ${LINRAD_SOURCES} csplit.c)

set(LINRAD_SOURCES ${LINRAD_SOURCES} wmain.c wsys.c winvar.c wsetad.c wsdr.c hidwin.c)
set(EXTRA_LIBS ${EXTRA_LIBS} ws2_32 winmm gdi32 setupapi ole32)

# Build clinrad, the only executable that can be built with CMake.
# clinrad uses xmain.c as the main program.
# Therefore clinrad should behave exactly as xlinrad.
add_executable (clinrad ${LINRAD_SOURCES})
#add_definitions(-Wall -Werror)
#target_link_libraries (clinrad m ${CMAKE_THREAD_LIBS_INIT} ${CMAKE_DL_LIBS} ${EXTRA_LIBS})
target_link_libraries (clinrad ${CMAKE_THREAD_LIBS_INIT} ${CMAKE_DL_LIBS} ${EXTRA_LIBS})