Skip to content

Latest commit

 

History

History
197 lines (136 loc) · 8.32 KB

README.md

File metadata and controls

197 lines (136 loc) · 8.32 KB

DigitalSTROM MQTT

This application allows you to set and react to any DigitalSTROM devices using MQTT.

You can set the output values using the command topic and get the current value using the state topic.

Migrating from version 1.x to version 2.x

See Migration from V1.x to V2.x

Motivation

DigitalSTROM system is built upon scenes. You press a button, and a scene starts. The scene can trigger as many output devices as you want. While this is fine for a standalone system, it’s really difficult to integrate with a more complex automation system. Basically, if you want the master of your automation to be an external system, you will have a bad time.

DigitalSTROM provides a REST api, but it’s not that easy to use since the structures of the element can be quite complex. There is also a notification endpoint that uses websocket to alert you of any value change. This app uses latest version of the REST API and the notification endpoint to provide a simple MQTT interface.

Currently, digitalSTROM integrations with home automation systems are rare and sometimes limited. The intent of this app is to solve this issue as all of them support MQTT.

Concept

The main goal of this application is to have direct access to the output devices (light, blinds,...) and be notified when something changes. All of this using MQTT as it’s widely used in home automation systems.

This application will not reflect the internal functioning of digitalSTROM. It will rather try to make an abstraction of it.

Technical

This app use the Smarthome API from digitalSTROM. It doesn't use the old json/device/ api. The documentation is sometimes lacking, so I had to browser various forum and discussion groups to find all the relevant information.

Configuration

You have two ways of configuring the app. Either using a config.yaml file next to the executable or with environment variables.

required property description default example
* DIGITALSTROM_HOST Ip address of the digitalstrom system 192.168.1.10
DIGITALSTROM_PORT Secure port of the rest API 8080
* DIGITALSTROM_API_KEY DigitalSTROM API key 782f...6075d
* MQTT_URL MQTT url tcp://192.168.1.20:1883
MQTT_USERNAME MQTT username myUser
MQTT_PASSWORD MQTT password 9TyVg74e5S
MQTT_TOPIC_PREFIX Topic prefix digitalstrom
MQTT_NORMALIZE_DEVICE_NAME Remove special chars from device name true
MQTT_RETAIN Retain MQTT messages true
REFRESH_AT_START should the states be refreshed at start true
LOG_LEVEL log level INFO TRACE,DEBUG,INFO,WARN,ERROR
INVERT_BLINDS_POSITION 100% is fully close false
HOME_ASSISTANT_DISCOVERY_ENABLED Whether or not publish MQTT Discovery messages for Home Assistant true
HOME_ASSISTANT_DISCOVERY_PREFIX Topic prefix where to publish the MQTT Discovery messaged for Home Assistant homeassistant
HOME_ASSISTANT_REMOVE_REGEXP_FROM_NAME Regular expression to remove from device names when announcing to Home Assistant "(light|cover)"

Obtaining the API key

There is a build-in tool to get the API key. You can run it with the following command:

./digitalstrom-mqtt -mode=get-api-key -host 192.168.1.x -username=dssadmin -password=XXX

Just copy the API key spilled out in the console in your config file. Be sure to save the key, you want be able to see it again and you will have to create another key. The key will then be visible in the digitalSTROM web api under System -> Access Authorization. You can also remove it from there if you want to.

To see all available option, you can do:

./digitalstrom-mqtt -h

From docker you can run this:

docker run --rm gaetancollaud/digitalstrom-mqtt -mode=get-api-key -host 192.168.1.x -username=dssadmin -password=XXX

Minimal config file

config.yaml

DIGITALSTROM_HOST: 192.168.1.x
DIGITALSTROM_API_KEY: XXX
MQTT_URL: tcp://192.168.1.X:1883

MQTT topic format

The topic format is as follows for the devices:

{prefix}/devices/{deviceName}/{channel}/{commandState}

The topic format is as follows for the meterings:

{prefix}/meterings/{deviceName}/{channel}/state

The server status topic is

{prefix}/server/status

How to run

Using the binary

Go to Releases, download and unzip the latest version for your OS. Create the config file as shown above.

Start the executable

./digitalstrom-mqtt

Using docker

docker run \
  -e DIGITALSTROM_HOST=192.168.1.x \
  -e DIGITALSTROM_API_KEY=XXX \
  -e MQTT_URL=tcp://192.168.1.X:1883 \
  gaetancollaud/digitalstrom-mqtt

Home automation integration examples

MQTT-Explorer

We recommend using https://mqtt-explorer.com/ if you want a simple interface for MQTT.

Topics

GE devices (lights)

digitalstrom/devices/DEVICE_NAME/brightness/state
digitalstrom/devices/DEVICE_NAME/brightness/command

GR devices (blinds)

digitalstrom/devices/DEVICE_NAME/shadePositionOutside/state
digitalstrom/devices/DEVICE_NAME/shadePositionOutside/command
digitalstrom/devices/DEVICE_NAME/shadeOpeningAngleOutside/state
digitalstrom/devices/DEVICE_NAME/shadeOpeningAngleOutside/command

dSS20 (controllers)

digitalstrom/meterings/chambres/consumptionW/state
digitalstrom/meterings/chambres/energyWs/state

Tested devices

digitalSTROM-MQTT was tested successfully with these devices:

  • dSM12
  • dSS20
  • GE-KM200
  • GE-TKM210
  • GE-UMV200 (see #22)
  • GE-KL200 (see #23)
  • SW-TKM200
  • SW-TKM210
  • GR-KL200
  • GR-KL210
  • GR-KL220
  • GN-KM200 (see #21)

Some devices are known to have issues or limitations:

Feel free to create an issue or to directly edit this file if you have tested this software with your devices.

Development

See CONTRIBUTION.md