-
Notifications
You must be signed in to change notification settings - Fork 1
/
openwrt.patch
215 lines (214 loc) · 6.98 KB
/
openwrt.patch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
diff --git a/target/linux/ath79/dts/qca9533_yuncore_cpe830.dts b/target/linux/ath79/dts/qca9533_yuncore_cpe830.dts
new file mode 100644
index 0000000000000..3f22715c7a707
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_yuncore_cpe830.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "yuncore,cpe830", "qca,qca9533";
+ model = "YunCore/KuWfi CPE830(D)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ aliases {
+ label-mac-device = &wmac;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wifi {
+ label = "wifi";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan {
+ label = "wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "lan";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ link1 {
+ label = "link1";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "link2";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "link3";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ link4 {
+ label = "link4";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ cal_art_1000: calibration@1000 {
+ reg = <0x1000 0x440>;
+ };
+ };
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+ phy-handle = <&swphy4>;
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+};
+
+ð1 {
+ status = "okay";
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+ status = "okay";
+ nvmem-cells = <&cal_art_1000>;
+ nvmem-cell-names = "calibration";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 143309a8b242f..2b2a48c088600 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -543,6 +543,15 @@ yuncore,a770)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x10"
;;
+yuncore,cpe830)
+ ucidef_set_led_netdev "wan" "WAN" "wan" "eth1"
+ ucidef_set_led_switch "lan" "LAN" "lan" "eth0"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "link1" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "link2" "wlan0" "26" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "link3" "wlan0" "51" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "link4" "wlan0" "76" "100"
+ ;;
zbtlink,zbt-wd323)
ucidef_set_led_switch "lan1" "LAN1" "orange:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "orange:lan2" "switch0" "0x08"
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 459d595a425fc..2d4ee9d936f6e 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -3228,6 +3228,19 @@ define Device/yuncore_xd3200
endef
TARGET_DEVICES += yuncore_xd3200
+define Device/yuncore_cpe830
+ SOC := qca9533
+ DEVICE_VENDOR := YunCore
+ DEVICE_MODEL := CPE830(D)
+ DEVICE_ALT0_VENDOR = KuWfi
+ DEVICE_ALT0_MODEL = CPE830(D)
+ IMAGE_SIZE := 16000k
+ IMAGES += tftp.bin
+ IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
+ DEVICE_PACKAGES := rssileds kmod-ath9k -swconfig
+endef
+TARGET_DEVICES += yuncore_cpe830
+
define Device/yuncore_xd4200
SOC := qca9563
DEVICE_VENDOR := YunCore