Skip to content

Latest commit

 

History

History
356 lines (233 loc) · 12.5 KB

NEWS.rst

File metadata and controls

356 lines (233 loc) · 12.5 KB

Upgrade Guide

0.16.0

The ADIOS1 library is no longer developed in favor of ADIOS2. Consequently, ADIOS1 support was removed in openPMD-api 0.16.0 and newer. Please transition to ADIOS2.

For reading legacy ADIOS1 BP3 files, either use an older version of openPMD-api or the BP3 backend in ADIOS2. Note that ADIOS2 does not support compression in BP3 files.

pybind11 2.12.0 is now the minimally supported version for Python support.

0.15.0

Building openPMD-api now requires a compiler that supports C++17 or newer. MPark.Variant is not a dependency anymore (kudos and thanks for the great time!).

Python 3.10 & 3.11 are now supported, Python 3.6 is removed. openPMD-api now depends on toml11 3.7.1+. pybind11 2.10.1 is now the minimally supported version for Python support. Catch2 2.13.10 is now the minimally supported version for tests.

The following backend-specific members of the Dataset class have been removed: Dataset::setChunkSize(), Dataset::setCompression(), Dataset::setCustomTransform(), Dataset::chunkSize, Dataset::compression, Dataset::transform. They are replaced by backend-specific options in the JSON-based backend configuration. This can be passed in Dataset::options. The following configuration shows a compression configuration for ADIOS1 and ADIOS2:

{
  "adios1": {
    "dataset": {
      "transform": "blosc:compressor=zlib,shuffle=bit,lvl=1;nometa"
    }
  },
  "adios2": {
    "dataset": {
      "operators": [
        {
          "type": "zlib",
          "parameters": {
            "clevel": 9
          }
        }
      ]
    }
  }
}

Or alternatively, in TOML:

[adios1.dataset]
transform = "blosc:compressor=zlib,shuffle=bit,lvl=1;nometa"

[[adios2.dataset.operators]]
type = "zlib"
parameters.clevel = 9

The helper function shareRaw of the C++ API has been deprecated. In its stead, there are now new API calls RecordComponent::storeChunkRaw() and RecordComponent::loadChunkRaw.

The ADIOS1 backend is now deprecated, to be replaced fully with ADIOS2. Now is a good time to check if ADIOS2 is able to read old ADIOS1 datasets that you might have. Otherwise, openpmd-pipe can be used for conversion:

openpmd-pipe --infile adios1_dataset_%T.bp --inconfig 'backend = "adios1"' --outfile adios2_dataset_%T.bp --outconfig 'backend = "adios2"'

The class structure of Container and deriving classes has been reworked. Usage of the API generally stays the same, but code that relies on the concrete class structure might break.

The Iteration::closedByWriter() attribute has been deprecated as a leftover from the early streaming implementation.

Old:

double const * data;
recordComponent.storeChunk(shareRaw(data), offset, extent);

New:

double const * data;
recordComponent.storeChunkRaw(data, offset, extent);

Additionally, determineDatatype now accepts pointer types (raw and smart pointers):

Old:

std::vector<double> data;
Datatype dt = determineDatatype(shareRaw(data));

New:

std::vector<double> data;
Datatype dt = determineDatatype(data.data());

Note

determineDatatype does not directly accept determineDatatype(data), since it's unclear if the result from that call would be Datatype::DOUBLE or Datatype::VEC_DOUBLE.

In order to get the direct mapping between C++ type and openPMD datatype, use the template parameter of determineDatatype: determineDatatype<decltype(data)>() or determineDatatype<std::vector<double>>().

0.14.0

ADIOS 2.7.0 is now the minimally supported version for ADIOS2 support. Catch2 2.13.4 is now the minimally supported version for tests. pybind11 2.6.2 is now the minimally supported version for Python support.

In RecordComponent::loadChunk, the optional last argument targetUnitSI was removed as it has not been implemented yet and had thus no function.

0.13.0

Building openPMD-api now requires a compiler that supports C++14 or newer. Supported Python version are now 3.6 to 3.9. CMake 3.15.0 is now the minimally supported version for CMake.

Python

Reading the data_order of a mesh was broken. The old setter function (set_data_order) and read-only property (data_order) are now unified in a single, writable property:

import openpmd_api as io

series = io.Series("data%T.h5", io.Access.read_only)
rho = series.iterations[0].meshes["rho"]
rho.data_order = 'C'  # or 'F'

print(rho.data_order == 'C')  # True

Note: we recommend using 'C' order since version 2 of the openPMD-standard will simplify this option to 'C', too. For Fortran-ordered indices, please just invert the attributes axis_labels, grid_spacing and grid_global_offset accordingly.

The Iteration functions time, dt and time_unit_SI have been replaced with read-write properties of the same name, essentially without the ()-access. set_time, set_dt and set_time_unit_SI are now deprecated and will be removed in future versions of the library.

The already existing read-only Series properties openPMD, openPMD_extension, base_path, meshes_path, particles_path, particles_path, author, date, iteration_encoding, iteration_format and name are now declared as read-write properties. set_openPMD, set_openPMD_extension, set_base_path, set_meshes_path, set_particles_path, set_author, set_date, set_iteration_encoding, set_iteration_format and set_name are now deprecated and will be removed in future versions of the library.

The already existing read-only Mesh properties geometry, geometry_parameters, axis_labels, grid_spacing, grid_global_offset and grid_unit_SI are now declared as read-write properties. set_geometry, set_geometry_parameters, set_axis_labels, set_grid_spacing, set_grid_global_offset and set_grid_unit_SI are now deprecated and will be removed in future versions of the library.

The already existing read-only Attributable property comment is now declared as read-write properties. set_comment is now deprecated and will be removed in future versions of the library.

0.12.0-alpha

CMake 3.12.0 is now the minimally supported version for CMake. ADIOS 2.6.0 is now the minimally supported version for ADIOS2 support.

Python

The already existing read-only properties unit_dimension, unit_SI, and time_offset are now declared as read-write properties. set_unit_dimension, set_unit_SI, and set_time_offset are now deprecated and will be removed in future versions of the library.

Access_Type is now called Access. Using it by the old name is deprecated and will be removed in future versions of the library.

C++

AccessType is now called Access. Using it by the old name is deprecated and will be removed in future versions of the library.

0.11.0-alpha

ADIOS2 is now the default backend for .bp files. As soon as the ADIOS2 backend is enabled it will take precedence over a potentially also enabled ADIOS1 backend. In order to prefer the legacy ADIOS1 backend in such a situation, set an environment variable: export OPENPMD_BP_BACKEND="ADIOS1". Support for ADIOS1 is now deprecated.

Independent MPI-I/O is now the default in parallel HDF5. For the old default, collective parallel I/O, set the environment variable export OPENPMD_HDF5_INDEPENDENT="OFF". Collective parallel I/O makes more functionality, such as storeChunk and loadChunk, MPI-collective. HDF5 attribute writes are MPI-collective in either case, due to HDF5 restrictions.

Our Spack packages build the ADIOS2 backend now by default. Pass -adios2 to the Spack spec to disable it: spack install openpmd-api -adios2 (same for spack load -r).

The Series::setSoftwareVersion method is now deprecated and will be removed in future versions of the library. Use Series::setSoftware(name, version) instead. Similarly for the Python API, use Series.set_software instead of Series.set_software_version.

The automated example-download scripts have been moved from .travis/download_samples.sh (and .ps1) to share/openPMD/.

0.10.0-alpha

We added preliminary support for ADIOS2 in this release. As long as also the ADIOS1 backend is enabled it will take precedence for .bp files over the newer ADIOS2 backend. In order to enforce using the new ADIOS2 backend in such a situation, set an environment variable: export OPENPMD_BP_BACKEND="ADIOS2". We will change this default in upcoming releases to prefer ADIOS2.

The JSON backend is now always enabled. The CMake option -DopenPMD_USE_JSON has been removed (as it is always ON now).

Previously, omitting a file ending in the Series constructor chose a "dummy" no-operation file backend. This was confusing and instead a runtime error is now thrown.

0.9.0-alpha

We are now building a shared library by default. In order to keep build the old default, a static library, append -DBUILD_SHARED_LIBS=OFF to the cmake command.

0.7.0-alpha

Python

Module Name

Our module name has changed to be consistent with other openPMD projects:

# old name
import openPMD

# new name
import openpmd_api

store_chunk Method

The order of arguments in the store_chunk method for record components has changed. The new order allows to make use of defaults in many cases in order reduce complexity.

particlePos_x = np.random.rand(234).astype(np.float32)

d = Dataset(particlePos_x.dtype, extent=particlePos_x.shape)
electrons["position"]["x"].reset_dataset(d)

# old code
electrons["position"]["x"].store_chunk([0, ], particlePos_x.shape, particlePos_x)

# new code
electrons["position"]["x"].store_chunk(particlePos_x)
# implied defaults:
#                         .store_chunk(particlePos_x,
#                                      offset=[0, ],
#                                      extent=particlePos_x.shape)

load_chunk Method

The loadChunk<T> method with on-the-fly allocation has default arguments for offset and extent now. Called without arguments, it will read the whole record component.

E_x = series.iterations[100].meshes["E"]["x"]

# old code
all_data = E_x.load_chunk(np.zeros(E_x.shape), E_x.shape)

# new code
all_data = E_x.load_chunk()

series.flush()

C++

storeChunk Method

The order of arguments in the storeChunk method for record components has changed. The new order allows to make use of defaults in many cases in order reduce complexity.

std::vector< float > particlePos_x(234, 1.234);

Datatype datatype = determineDatatype(shareRaw(particlePos_x));
Extent extent = {particlePos_x.size()};
Dataset d = Dataset(datatype, extent);
electrons["position"]["x"].resetDataset(d);

// old code
electrons["position"]["x"].storeChunk({0}, extent, shareRaw(particlePos_x));

// new code
electrons["position"]["x"].storeChunk(particlePos_x);
/* implied defaults:
 *                        .storeChunk(shareRaw(particlePos_x),
 *                                    {0},
 *                                    {particlePos_x.size()})  */

loadChunk Method

The order of arguments in the pre-allocated data overload of the loadChunk method for record components has changed. The new order allows was introduced for consistency with storeChunk.

float loadOnePos;

// old code
electrons["position"]["x"].loadChunk({0}, {1}, shareRaw(&loadOnePos));

// new code
electrons["position"]["x"].loadChunk(shareRaw(&loadOnePos), {0}, {1});

series.flush();

The loadChunk<T> method with on-the-fly allocation got default arguments for offset and extent. Called without arguments, it will read the whole record component.

MeshRecordComponent E_x = series.iterations[100].meshes["E"]["x"];

// old code
auto all_data = E_x.loadChunk<double>({0, 0, 0}, E_x.getExtent());

// new code
auto all_data = E_x.loadChunk<double>();

series.flush();