Copyright (c) 2014 IBM Corporation and/or its affiliates. All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
The go_ibm_db is an asynchronous/synchronous interface for GoLang to IBM DB2.
Following are the steps to installation in your system.
This go_ibm_db driver has been tested on 64-bit/32-bit IBM Linux, MacOS and Windows.
Download the
GoLang Linux binaries or Go Latest binaries and
extract the file, for example into /mygo
:
cd /mygo
wget -c https://golang.org/dl/go1.20.5.linux-amd64.tar.gz
tar -xzf go1.20.5.linux-amd64.tar.gz
Set PATH to include Go:
export PATH=/mygo/go/bin:$PATH
Following are the steps to install go_ibm_db from github.
using directory /goapp
for example.
1. mkdir goapp
2. cd goapp
3. go install github.com/ibmdb/go_ibm_db/installer@latest
or
go install github.com/ibmdb/go_ibm_db/[email protected]
It's Done.
1. mkdir goapp
2. cd goapp
3. git clone https://github.com/ibmdb/go_ibm_db/
Download clidriver in your system, use below command: go to installer folder where go_ibm_db is downloaded in your system (Example: /home/uname/go/src/github.com/ibmdb/go_ibm_db/installer or /home/uname/goapp/go_ibm_db/installer where uname is the username) and run setup.go file (go run setup.go)
export IBM_DB_HOME=/home/uname/clidriver
export CGO_CFLAGS=-I$IBM_DB_HOME/include
export CGO_LDFLAGS=-L$IBM_DB_HOME/lib
export LD_LIBRARY_PATH=/home/uname/clidriver/lib
or
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$IBM_DB_HOME/lib
cd .../go_ibm_db/installer
source setenv.sh
Download the GoLang MacOS binaries or GoLang Latest binaries and extract the file.
1. mkdir goapp
2. cd goapp
3. go install github.com/ibmdb/go_ibm_db/installer@latest
or
go install github.com/ibmdb/go_ibm_db/[email protected]
It's Done.
1. mkdir goapp
2. cd goapp
3. git clone https://github.com/ibmdb/go_ibm_db/
Download clidriver in your system, use below command: go to installer folder where go_ibm_db is downloaded in your system (Example: /home/uname/go/src/github.com/ibmdb/go_ibm_db/installer or /home/uname/goapp/go_ibm_db/installer where uname is the username) and run setup.go file (go run setup.go)
export IBM_DB_HOME=/home/uname/clidriver
export CGO_CFLAGS=-I$IBM_DB_HOME/include
export CGO_LDFLAGS=-L$IBM_DB_HOME/lib
export DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:/home/uname/go/src/github.com/ibmdb/clidriver/lib
or
export DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:$IBM_DB_HOME/lib
cd .../go_ibm_db/installer
source setenv.sh
Download the Go Windows binary/installer or Go Latest binaries and install it.
Following are the steps to install go_ibm_db from github.
using directory /goapp
for example.
1. mkdir goapp
2. cd gopapp
3. go install github.com/ibmdb/go_ibm_db/installer@latest
or
go install github.com/ibmdb/go_ibm_db/[email protected]
1. mkdir goapp
2. cd goapp
3. git clone https://github.com/ibmdb/go_ibm_db/
Download clidriver in your system, go to installer folder where go_ibm_db is downloaded in your system, use below command: (Example: C:\Users\uname\go\src\github.com\ibmdb\go_ibm_db\installer or C:\goapp\go_ibm_db\installer where uname is the username ) and run setup.go file (go run setup.go).
set IBM_DB_HOME=C:\Users\uname\go\src\github.com\ibmdb\clidriver
set PATH=%PATH%;C:\Users\uname\go\src\github.com\ibmdb\clidriver\bin
or
set PATH=%PATH%;%IBM_DB_HOME%\bin
cd .../go_ibm_db/installer
Run setenvwin.bat
It's Done.
- Download platform specific clidriver from https://public.dhe.ibm.com/ibmdl/export/pub/software/data/db2/drivers/odbc_cli/ , untar/unzip it and set
IBM_DB_HOME
environmental variable to full path of extracted 'clidriver' directory, for example if clidriver is extracted as:/home/mysystem/clidriver
, then set system level environment variableIBM_DB_HOME=/home/mysystem/clidriver
.
Warning: If you use the ARM version of homebrew (as recommended for M1/M2 chip systems) you will get the following error message:
$ brew install gcc-12
Error: Cannot install in Homebrew on ARM processor in Intel default prefix (/usr/local)!
Please create a new installation in /opt/homebrew using one of the
"Alternative Installs" from:
https://docs.brew.sh/Installation
You can migrate your previously installed formula list with:
brew bundle dump
Install gcc@12
using homebrew (note: the x86_64 version of homebrew is needed for this, not the recommended ARM based homebrew)
. The clearest instructions on how to install and use the x86_64
version of homebrew
is by following below steps:
- My arm64/M1 brew is installed here:
$ which brew
/opt/homebrew/bin/brew
- Step 1. Install x86_64 brew under /usr/local/bin/brew
arch -x86_64 /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
- Step 2. Create an alias for the x86_64 brew I added this to my ~/.bashrc as below:
# brew hack for x86_64
alias brew64='arch -x86_64 /usr/local/bin/brew'
- Then install gcc@12 using the x86_64 homebrew:
brew64 install gcc@12
- Now find location of
lib/gcc/12/libstdc++.6.dylib
file in your system. It should be inside/usr/local/homebrew/lib/gcc/12
or/usr/local/lib/gcc/12
or/usr/local/homebrew/Cellar/gcc@12/12.2.0/lib/gcc/12
or something similar. You need to find the correct path. Suppose path of gcc lib is/usr/local/homebrew/lib/gcc/12
. Then update your .bashrc/.zshrc file with below line
export DYLD_LIBRARY_PATH=/usr/local/homebrew/lib/gcc/12:$DYLD_LIBRARY_PATH