Skip to content

Latest commit

 

History

History
 
 

book

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
buildroot
buildroot
 
 
cflags
cflags
 
 
kernel
kernel
 
 
metadata
metadata
 
 
resources/boot-scripts
resources/boot-scripts
 
 
root_overlay
root_overlay
 
 
README.md
README.md
 
 

README.md

Pine64 PineBook

This configuration package pine64/book compiles a Skiff base operating system for the PineBook Pro.

References:

Getting Started

Set the comma-separated SKIFF_CONFIG variable:

$ export SKIFF_CONFIG=pine64/book,core/pinebook_gentoo
$ make configure                   # configure the system
$ make compile                     # build the system

Once the build is complete, it's time to flash the system. There are several approaches, please see the "Flashing" section in the common readme.

GentooLTO with KDE for Pinebook

Add core/pinebook_gentoo to enable the GentooLTO based KDE for Pinebook Pro.

Downloads the skiffos/skiff-core-gentoo-kde:pinebook-lto image at first boot, which contains an up-to-date GentooLTO (optimizations O3) installation with a variety of kde desktop apps, and lightdm / x11 pre-configured with Panfrost hardware acceleration.

XFCE with NixOS

Add core/nixos_xfce to SKIFF_CONFIG to enable "Skiff Core" with XFCE Desktop configured.

Flashing U-boot to Internal Emmc

Note: the PineBook will, on default, boot from the internal emmc with higher priority than the MicroSD card.

Skiff's u-boot with adjusted boot priority can be flashed to the emmc from a running pinebook system using two files from the images dir:

dd if=idbloader.img of=/dev/mmcblk0 seek=64 oflag=dsync
dd if=u-boot.itb of=/dev/mmcblk0 seek=16384 oflag=dsync

This will allow the system to boot from the SD card with higher priority than the internal emmc, if found containing a valid u-boot flash.

Recovering from broken u-boot flash

If, for some reason, the machine does not boot properly after flashing the emmc, you will need to use the following steps to force a boot to the microsd card:

  1. Power off the laptop.
  2. Remove the back plate.
  3. Switch the "emmc" switch to "off."
  4. Insert a working SD card.
  5. Power on the laptop.
  6. When the power LED lights, immediately switch the emmc to "on."

If done correctly, the EMMC will be available in the system booted to the working MicroSD card. The u-boot image on the emmc can then be flashed back to a working state from the running system.

Known Issues

The following are known upstream issues: