Calculating Zone not working any more [pyETO: calculate_et_for_day] missing Minimum/Maximum Temperature #471
Comments
schmeggspert
changed the title
|
Are you certain you are on 2024.8.0 and not one of the betas? Please clear your browser cache to make sure you have the right version installed. |
|
Yes, I’m sure I’ve never installed any beta as well as I cleared my browser history and double checked. |
|
OK thanks for letting me know. I think this is an issue I actually fixed in a beta. It's likely because there is just one data point. Try updating multiple times before calculating. |
|
Thx for the hint! When I’m updating multiple times the error is not shown up but the duration is not calculated - it keep 0 |
|
Same issue here. Data is available but calculation is always 0. I'll try to install a beta to see if it is sorted out. |
|
Updated to 2024.8.1-beta8 solves the issue 👍 |
|
Updated to 2024.8.1-beta8, nothing changed for me... calculate still does not change anything... |
didn't help either.. |
OK, please post a diag file. |
I uninstalled and reinstalled 2024.8.0 again - now It is calculating when there is more than one datapoints. With the beta version I don’t receive any error log message again. |
|
@schmeggspert I strongly suspect a browser cache issue here. Glad it works now. |
|
It still does not work for me... even after updating to the latest version v2024.8.2. 2024-08-26 23:31:35.675 ERROR (SyncWorker_19) [homeassistant] Error doing job: Task exception was never retrieved (None) |
|
as requested before @akcasoy please post your diag file or storage file |
|
I have now deleted the integration and installed again.. the problem still exists :/ |
|
I'm having the same issue. It worked up until yesterday then quit. I looked at my logs and it's showing an error with the Pirateweather pressure value causing an pyETO error. I tried to manually set a value but it's not taking that either. Editing When I select the sensors it seems to default to static value but does not save entry. If I select Weather Service, go to another tab and come back to the sensor tab, it goes back to a blank static selection. 2024-08-28 20:22:40.871 ERROR (SyncWorker_3) [homeassistant.core] unable to convert unknown to float. Please check the source sensor is available. |
|
I deleted and reinstalled v2024.8.2 with no change. Reinstalled v2024.8.0 with no change. I deleted the directory and restored from a weekly backup to v2024.8.0 and it's back working. I will hold off on upgrading again to v2024.8.2. |
|
I will never update this integration on the first new release days.. |
It would have been very helpful if you had given more info on your config, which versions you had installed (especially beta versions) etc. Glad you got it resolved though. |
Did you have a beta version installed before? |
|
Unfortunately, although I thought it was corrected, it only worked one time. I am back in the same shape now. Sent from my iPhoneOn Aug 30, 2024, at 11:54 AM, Jeroen ter Heerdt ***@***.***> wrote:
I have now deleted the integration and installed again.. the problem still exists :/ Here is my diagnostic file. config_entry-smart_irrigation-01J68AR5AMMW69BK3WJNF8D63A.json
Did you have a beta version installed before?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
Asking again: did you ever have a beta version installed? |
|
I don’t think so. Sent from my iPhoneOn Aug 30, 2024, at 2:23 PM, Jeroen ter Heerdt ***@***.***> wrote:
Unfortunately, although I thought it was corrected, it only worked one time. I am back in the same shape now. Sent from my iPhoneOn Aug 30, 2024, at 11:54 AM, Jeroen ter Heerdt @.> wrote: I have now deleted the integration and installed again.. the problem still exists :/ Here is my diagnostic file. config_entry-smart_irrigation-01J68AR5AMMW69BK3WJNF8D63A.json Did you have a beta version installed before? —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.>
Asking again: did you ever have a beta version installed?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
What happened?
Zones are not calculated any more. Trying to press update and calculate but there was a log entry created that Minimum/Maximum temperature not available.
I'm using Smart Irrigation with Openweather integration.
I also tried to reinstall/reconfigure Smart Irrigation without any impact.
Version Information:
Core 2024.8.2
Supervisor 2024.08.0
Operating System 13.0
Frontend 20240809.0
Smart Irrigation v2024.8.0
How to reproduce
Pressing update/calculate
Relevant log output
Which version are you running?
v2024.8.0
Diagnostics file
Additional information
{
"home_assistant": {
"installation_type": "Home Assistant OS",
"version": "2024.8.2",
"dev": false,
"hassio": true,
"virtualenv": false,
"python_version": "3.12.4",
"docker": true,
"arch": "aarch64",
"timezone": "Europe/Vienna",
"os_name": "Linux",
"os_version": "6.6.31-haos-raspi",
"supervisor": "2024.08.0",
"host_os": "Home Assistant OS 13.0",
"docker_version": "26.1.4",
"chassis": "embedded",
"run_as_root": true
},
"custom_components": {
"pyscript": {
"documentation": "https://github.com/custom-components/pyscript",
"version": "1.6.1",
"requirements": [
"croniter==2.0.2",
"watchdog==2.3.1"
]
},
"webuntis": {
"documentation": "https://github.com/JonasJoKuJonas/homeassistant-WebUntis/",
"version": "v1.1.4",
"requirements": [
"webuntis==0.1.22"
]
},
"tuya_local": {
"documentation": "https://github.com/make-all/tuya-local",
"version": "2024.7.1",
"requirements": [
"tinytuya==1.15.1",
"tuya-device-sharing-sdk>=0.1.9,<=0.2.99"
]
},
"presence_simulation": {
"documentation": "https://github.com/slashback100/presence_simulation",
"version": "4.9",
"requirements": []
},
"iaqualinkRobots": {
"documentation": "https://github.com/galletn/iaqualink/",
"version": "v0.3.1",
"requirements": []
},
"localtuya": {
"documentation": "https://github.com/xZetsubou/hass-localtuya/",
"version": "6.0.0",
"requirements": []
},
"delete": {
"documentation": "https://github.com/chomupashchuk/delete-file-home-assistant",
"version": "1.9",
"requirements": []
},
"files": {
"documentation": "https://github.com/TarheelGrad1998/files",
"version": "1.5",
"requirements": []
},
"smart_irrigation": {
"documentation": "https://github.com/jeroenterheerdt/HASmartIrrigation",
"version": "v2024.8.0",
"requirements": []
},
"alarmo": {
"documentation": "https://github.com/nielsfaber/alarmo",
"version": "v1.10.4",
"requirements": []
},
"solcast_solar": {
"documentation": "https://github.com/BJReplay/ha-solcast-solar",
"version": "v4.1.3",
"requirements": [
"aiohttp>=3.8.5",
"aiofiles>=24.1.0",
"datetime>=4.3",
"isodate>=0.6.1"
]
},
"hacs": {
"documentation": "https://hacs.xyz/docs/configuration/start",
"version": "1.34.0",
"requirements": [
"aiogithubapi>=22.10.1"
]
},
"iaqualink": {
"documentation": "https://www.home-assistant.io/integrations/iaqualink/",
"version": "1.2.1-exo",
"requirements": [
"git+https://github.com/martinfrench92/iaqualink-py.git@zs500#iaqualink==0.5.3"
]
},
"epex_spot": {
"documentation": "https://github.com/mampfes/ha_epex_spot",
"version": "2.3.8",
"requirements": [
"beautifulsoup4"
]
}
},
"integration_manifest": {
"domain": "smart_irrigation",
"name": "Smart Irrigation",
"codeowners": [
"jeroenterheerdt"
],
"config_flow": true,
"dependencies": [
"http",
"panel_custom"
],
"documentation": "https://github.com/jeroenterheerdt/HASmartIrrigation",
"iot_class": "local_push",
"issue_tracker": "https://github.com/jeroenterheerdt/HASmartIrrigation/issues",
"requirements": [],
"version": "v2024.8.0",
"is_built_in": false
},
"setup_times": {
"null": {
"setup": 0.00011762900001599519
},
"01J5FEF2Y6CPQ3G70H8V4SHHKW": {
"wait_import_platforms": -2.31501912600001,
"config_entry_setup": 2.416037100000011
}
},
"data": {
"use_weather_service": true,
"weather_service": "Open Weather Map",
"weather_service_api_key": "[redacted]",
"weather_service_api_version": null,
"store": {
"config": {
"calctime": "23:00",
"units": "metric",
"use_weather_service": true,
"weather_service": "Open Weather Map",
"autocalcenabled": true,
"autoupdateenabled": true,
"autoupdateschedule": "hours",
"autoupdatedelay": "0",
"autoupdateinterval": "1",
"autoclearenabled": true,
"cleardatatime": "23:59",
"starteventfiredtoday": false,
"continuousupdates": false
},
"mappings": [
{
"id": 0,
"name": "Standard Sensorgruppe",
"mappings": {
"Dewpoint": {
"source": "weather_service",
"sensorentity": "",
"unit": ""
},
"Evapotranspiration": {
"source": "none",
"sensorentity": "",
"unit": ""
},
"Humidity": {
"source": "weather_service",
"sensorentity": "",
"unit": ""
},
"Precipitation": {
"source": "weather_service",
"sensorentity": "",
"unit": ""
},
"Pressure": {
"source": "weather_service",
"sensorentity": "",
"unit": ""
},
"Solar Radiation": {
"source": "none",
"sensorentity": "",
"unit": ""
},
"Temperature": {
"source": "weather_service",
"sensorentity": "",
"unit": ""
},
"Windspeed": {
"source": "weather_service",
"sensorentity": "",
"unit": ""
}
},
"data": [],
"data_last_updated": "2024-08-17T08:33:42.405371"
}
],
"modules": [
{
"id": 0,
"name": "PyETO",
"description": "Die Berechnung der Verunstungsrate basiert auf der FAO56-Formel aus der PyETO-Bibliothek.",
"config": {
"forecast_days": "3",
"coastal": false,
"solrad_behavior": "4"
},
"schema": [
{
"type": "boolean",
"name": "coastal",
"optional": true,
"default": false
},
{
"type": "select",
"options": [
[
"1",
"EstimateFromTemp"
],
[
"2",
"EstimateFromSunHours"
],
[
"3",
"DontEstimate"
],
[
"4",
"EstimateFromSunHoursAndTemperature"
]
],
"name": "solrad_behavior",
"required": true,
"default": {
"__type": "<enum 'SOLRAD_behavior'>",
"repr": "<SOLRAD_behavior.EstimateFromTemp: '1'>"
}
},
{
"type": "integer",
"name": "forecast_days",
"optional": true,
"default": 0
}
]
}
],
"zones": [
{
"id": 1,
"name": "Garten",
"size": 33.0,
"throughput": 7.0,
"state": "automatic",
"bucket": 1.957504110755438,
"old_bucket": 1.957504110755438,
"delta": 0.0,
"duration": 0,
"module": 0,
"multiplier": 1.0,
"explanation": "Beachte: Diese Beschreibung nutzt '.' als Dezimalzeichen und zeigt gerundete Werte. Das Modul berechnete einen Evapotranspirationsmangel von 0.0. Der alte Vorrat war 2.0.
Der maximale Vorrat ist 50.0.Der neue Vorrat ist [alter_Vorrat]+[Ver\u00e4nderung]=2.0+0.0=2.0.
Wenn der Vorrat >= 0 ist, ist keine Bew\u00e4sserung n\u00f6tig und die Dauer ist gleich 0",
"mapping": 0,
"lead_time": 0.0,
"maximum_duration": 1800.0,
"maximum_bucket": 50,
"last_calculated": "2024-08-17T08:33:44.520105",
"last_updated": "2024-08-17T08:33:42.405371",
"number_of_data_points": 0
},
{
"id": 2,
"name": "Hochbeet",
"size": 2.0,
"throughput": 1.5,
"state": "automatic",
"bucket": 1.957504110755438,
"old_bucket": 1.957504110755438,
"delta": 0.0,
"duration": 0,
"module": 0,
"multiplier": 1.0,
"explanation": "Beachte: Diese Beschreibung nutzt '.' als Dezimalzeichen und zeigt gerundete Werte. Das Modul berechnete einen Evapotranspirationsmangel von 0.0. Der alte Vorrat war 2.0.
Der maximale Vorrat ist 50.0.Der neue Vorrat ist [alter_Vorrat]+[Ver\u00e4nderung]=2.0+0.0=2.0.
Wenn der Vorrat >= 0 ist, ist keine Bew\u00e4sserung n\u00f6tig und die Dauer ist gleich 0",
"mapping": 0,
"lead_time": 0.0,
"maximum_duration": 1200.0,
"maximum_bucket": 50,
"last_calculated": "2024-08-17T08:33:44.546009",
"last_updated": "2024-08-17T08:33:42.405371",
"number_of_data_points": 0
},
{
"id": 3,
"name": "MicroDrip",
"size": 0.4,
"throughput": 0.0667,
"state": "automatic",
"bucket": 1.957504110755438,
"old_bucket": 1.957504110755438,
"delta": 0.0,
"duration": 0,
"module": 0,
"multiplier": 1.0,
"explanation": "Beachte: Diese Beschreibung nutzt '.' als Dezimalzeichen und zeigt gerundete Werte. Das Modul berechnete einen Evapotranspirationsmangel von 0.0. Der alte Vorrat war 2.0.
Der maximale Vorrat ist 50.0.Der neue Vorrat ist [alter_Vorrat]+[Ver\u00e4nderung]=2.0+0.0=2.0.
Wenn der Vorrat >= 0 ist, ist keine Bew\u00e4sserung n\u00f6tig und die Dauer ist gleich 0",
"mapping": 0,
"lead_time": 0.0,
"maximum_duration": 3600.0,
"maximum_bucket": 50,
"last_calculated": "2024-08-17T08:33:44.575073",
"last_updated": "2024-08-17T08:33:42.405371",
"number_of_data_points": 0
}
]
}
}
}
The text was updated successfully, but these errors were encountered: