- 1x left hand plate
- 1x left hand base
- 1x right-hand plate
- 1x right-hand base
- 1x logic PCB
- 42x switches, standard MX or Kailh PG1350 Chocolate
- 42x 1u keycaps
- Controller boards
- Split + wireless: 2x Nice!Nano
- Monoblock + wireless: 1x Nice!Nano
- Split + wired: 2x ProMicro (Elite-C and Proton-C not verified to work)
- Monoblock + wired: 1x ProMicro (Elite-C and Proton-C not verified to work)
- 2x reset switches, YD-3414, available on AliExpress
- 24x M2 screws. 4mm long, wafer head <0.5mm thick, available on AliExpress.
- 12x M2 cylindrical standoffs, <3.5mm diameter, available on AliExpress
- 7mm long for low-profile, Kailh PG1350 Chocolate switches
- 9mm long for standard, MX style switches
- 8x Non-slip feet, >1mm thick. The below self-adhesive silicone pads, which are marketed as nose pads for glasses, are extremely non-slip and an ideal thickness. Available on Amazon.
- (optional) 2x batteries. These must be smaller than 10mm wide x 44mm long x 5mm thick. 501040 batteries are the highest-capacity batteries I have found that fit. Available on AliExpress
- (optional) 2x 3.5mm TRRS jacks, PJ-320A, available on AliExpress
- (optional) 1x 3d printed left case, see print instructions
- (optional) 1x 3d printed right case, see print instructions
- (optional for wired+split) 1x 3.5mm TRS (mono) or TRRS (stereo) cable
- (optional) 84x Mill-Max sockets
- 7305, 0305-0 and 0305-1 only!
- 0305-2 sockets are too long and will NOT work!
