immersion-monitor.yaml

esphome:
  name: immersion-monitor

esp8266:
  board: esp8285

# Enable logging
logger:
  baud_rate: 0

# Enable Home Assistant API
api:

ota:
  password: !secret ota_password

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Immersion-Monitor"
    password: !secret fallback_password

captive_portal:

uart:
  rx_pin: RX
  baud_rate: 4800

sensor:
  - platform: cse7766
    current:
      name: "Immersion Current"
    voltage:
      name: "Immersion Voltage"
    power:
      name: "Immersion Power"
    energy:
      name: "Immersion Energy"
    update_interval: 5s
    
binary_sensor:
  - platform: gpio
    id: bttn
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    on_press:
      - switch.toggle: relay

switch:
  - platform: gpio
    name: "Immersion Monitor"
    pin: GPIO12
    id: relay