KlipperScreen.conf

[printer ČeBe V2.1070]

titlebar_items: chamber, bed_corner
[preheat PLA]
bed = 40
extruder = 195

[preheat ABS]
bed = 90
extruder = 220

[menu __main]
name: {{ gettext('Main Menu') }}

[menu __main homing]
name: {{ gettext('Homing') }}
icon: home

#[menu __main preheat]
#name: {{ gettext('Preheat') }}
#icon: heat-up
#panel: preheat

[menu __main actions]
name: {{ gettext('Actions') }}
icon: move

[menu __main config]
name: {{ gettext('Configuration') }}
icon: settings

[menu __main print]
name: {{ gettext('Print') }}
icon: print
panel: print

[menu __main standby]
name: Standby
icon: shutdown
method: printer.gcode.script
params: {"script":"STANDBY"}

[menu __main homing homeall]
name: {{ gettext('Home All') }}
icon: home
method: printer.gcode.script
params: {"script":"G28"}

[menu __main homing homex]
name: {{ gettext('Home X') }}
icon: home-x
method: printer.gcode.script
params: {"script":"G28 X"}

[menu __main homing homey]
name: {{ gettext('Home Y') }}
icon: home-y
method: printer.gcode.script
params: {"script":"G28 Y"}

[menu __main homing homez]
name: {{ gettext('Home Z') }}
icon: home-z
method: printer.gcode.script
params: {"script":"G28 Z"}

[menu __main homing homexy]
name: {{ gettext('Home XY') }}
icon: home
method: printer.gcode.script
params: {"script":"G28 X Y"}

[menu __main homing quad_gantry_level]
name: {{ gettext('Quad Gantry Level') }}
icon: home-z
method: printer.gcode.script
params: {"script":"QUAD_GANTRY_LEVEL"}
enable: {{ printer.quad_gantry_level is defined }}

[menu __main actions move]
name: {{ gettext('Move') }}
icon: move
panel: move

[menu __main actions extrude]
name: {{ gettext('Extrude') }}
icon: filament
panel: extrude

[menu __main actions fan]
name: {{ gettext('Fan') }}
icon: fan
panel: fan

[menu __main actions temperature]
name: {{ gettext('Temperature') }}
icon: heat-up
panel: temperature

[menu __main actions macros]
name: {{ gettext('Macros') }}
icon: custom-script
panel: gcode_macros
enable: {{ printer.gcode_macros.count > 0 }}

[menu __main actions power]
name: {{ gettext('Power') }}
icon: shutdown
panel: power
enable: {{ printer.power_devices.count > 0 }}

[menu __main actions disablemotors]
name: {{ gettext('Disable Motors') }}
icon: motor-off
method: printer.gcode.script
params: {"script":"M18"}

[menu __main actions console]
name: {{ gettext('Console') }}
icon: console
panel: console

[menu __main config bedmesh]
name: {{ gettext('Bed Mesh') }}
icon: bed-level
panel: bed_mesh
enable: {{ printer.bed_mesh is defined }}

[menu __main config zoffset]
name: {{ gettext('Z Calibrate') }}
icon: z-farther
panel: zcalibrate
enable: {{ ((printer.bltouch != False) or (printer.probe != False)) }}

[menu __main config limits]
name: {{ gettext('Limits') }}
icon: fine-tune
panel: limits

[menu __main config network]
name: {{ gettext('Network') }}
icon: network
panel: network

[menu __main config system]
name: {{ gettext('System') }}
icon: info
panel: system

[menu __main config save]
name: {{ gettext('Save Config') }}
icon: complete
method: printer.gcode.script
params: {"script":"SAVE_CONFIG"}
confirm:
    {{ gettext('Save configuration.') }}

    {{ gettext('Klipper will reboot') }}

[menu __main config settings]
name: {{ gettext('Settings') }}
icon: settings
panel: settings

[menu __print]
name: {{ gettext('Print Control') }}

[menu __print temperature]
name: {{ gettext('Temperature') }}
icon: heat-up
panel: temperature

[menu __print fan]
name: {{ gettext('Fan') }}
icon: fan
panel: fan

[menu __print extrude]
name: {{ gettext('Extrude') }}
icon: filament
panel: extrude
enable: {{ printer.pause_resume.is_paused == True }}

[menu __print power]
name: {{ gettext('Power') }}
icon: shutdown
panel: power
enable: {{ printer.power_devices.count > 0 }}

[menu __print macros]
name: {{ gettext('Macros') }}
icon: custom-script
panel: gcode_macros
enable: {{ printer.gcode_macros.count > 0 }}

[menu __print console]
name: {{ gettext('Console') }}
icon: console
panel: console

[menu __print limits]
name: {{ gettext('Limits') }}
icon: fine-tune
panel: limits

[menu __print network]
name: {{ gettext('Network') }}
icon: network
panel: network

[menu __print system]
name: {{ gettext('System') }}
icon: info
panel: system

[menu __print settings]
name: {{ gettext('Settings') }}
icon: settings
panel: settings

[menu __splashscreen]
name: {{ gettext('Menu') }}

[menu __splashscreen power]
name: {{ gettext('Power') }}
icon: shutdown
panel: power
enable: {{ printer.power_devices.count > 0 }}

[menu __splashscreen network]
name: {{ gettext('Network') }}
icon: network
panel: network

[menu __splashscreen system]
name: {{ gettext('System') }}
icon: info
panel: system

[menu __splashscreen settings]
name: {{ gettext('Settings') }}
icon: settings
panel: settings

[menu __main actions light]
name: Light
icon: home

[menu __main actions light led_light]
name: Light
icon: magnet-on
method: printer.gcode.script
params: {"script":"LED_LIGHT"}

[menu __main actions light led_rgb]
name: RGB
icon: magnet-on
method: printer.gcode.script
params: {"script":"LED_RGB"}

[menu __main actions light led_disco]
name: Disco
icon: magnet-on
method: printer.gcode.script
params: {"script":"LED_DISCO"}

[menu __main actions light led_dark]
name: Darkness
icon: stop
method: printer.gcode.script
params: {"script":"LED_DARK"}

#[menu __print Light]
# To build a sub-menu of this menu item, you would next use [menu __main my_menu_item sub_menu_item]
#name: Light
#icon: magnet-on

#[menu __print Light LED_LIGHT]
# To build a sub-menu of this menu item, you would next use [menu __main my_menu_item sub_menu_item]
#name: Light
#icon: open
#method: printer.gcode.script
#params: {"script":"LED_LIGHT"}

#[menu __print Light LED_RGB]
# To build a sub-menu of this menu item, you would next use [menu __main my_menu_item sub_menu_item]
#name: RGB
#icon: open
#method: printer.gcode.script
#params: {"script":"LED_RGB"}

#[menu __print Light LED_DISCO]
# To build a sub-menu of this menu item, you would next use [menu __main my_menu_item sub_menu_item]
#name: Disco
#icon: open
#method: printer.gcode.script
#params: {"script":"LED_DISCO"}

#[menu __print Light LED_DARK]
# To build a sub-menu of this menu item, you would next use [menu __main my_menu_item sub_menu_item]
#name: Darkness
#icon: stop
#method: printer.gcode.script
#params: {"script":"LED_DARK"}

#~# --- Do not edit below this line. This section is auto generated --- #~#
#~#
#~# [main]
#~# language = en
#~# theme = material-darker
#~# show_heater_power = True
#~# print_sort_dir = date_desc
#~# 
#~# [displayed_macros ČeBe V2.1070]
#~# ab_speed_test = False
#~# after_layer_change = False
#~# bed_mesh_area = False
#~# bed_mesh_calibrate = False
#~# check_flexplate = False
#~# cancel_print = False
#~# before_layer_change = False
#~# get_timelapse_setup = False
#~# hyperlapse = False
#~# led_all_effects = False
#~# led_disco = False
#~# led_heating_bed = False
#~# led_heating_extruder = False
#~# led_kitt = False
#~# logo_purge = False
#~# dump_warnings = False
#~# g32 = False
#~# test_stream_delay = False
#~# m600 = False
#~# timelapse_render = False
#~# timelapse_take_frame = False
#~# pause = False
#~# print_end = False
#~# print_start = False
#~# m141 = False
#~# resume = False
#~# m900 = False
#~# pressure_advance_calibration = False
#~# standby = False
#~# 
#~# [graph ČeBe V2.1070]
#~# temperature_sensor raspberry_pi = False
#~# temperature_fan controller = False
#~#