example_esp32h2.yaml

esphome:
  name: zb-example-h2
  platformio_options:
    platform: https://github.com/luar123/platform-espressif32H2/archive/refs/tags/v6.6.1.0.zip

external_components:
  - source: components
    components: [ zigbee ]

esp32:
  board: esp32-h2-devkitm-1
  flash_size: 4MB
  partitions: partitions_zb.csv
  framework:
    type: esp-idf
    version: 5.2.1
    sdkconfig_options:
      CONFIG_ESPTOOLPY_FLASHSIZE_4MB: y
  variant: esp32h2

# Enable logging
logger:
  hardware_uart: UART0

globals:
   - id: color_x
     type: float
     restore_value: no
     initial_value: '0'
   - id: color_y
     type: float
     restore_value: no
     initial_value: '0'

sensor:
  - platform: internal_temperature
    name: "Internal Temperature"
    id: "temp"
    filters:
      - delta: 0.1
    on_value:
      then:
        - zigbee.setAttr:
            id: zb
            endpoint: 2
            cluster: TEMP_MEASUREMENT
            attribute: 0x0
            value: !lambda "return x*100;"

zigbee:
  id: "zb"
  endpoints:
    - num: 1
      device_type: COLOR_DIMMABLE_LIGHT
      clusters:
        - id: ON_OFF
          attributes:
            - id: 0
              type: bool
              on_value:
                then:
                  - light.control:
                      id: light_1
                      state: !lambda "return (bool)x;"
        - id: LEVEL_CONTROL
          attributes:
            - id: 0
              type: U8
              on_value:
                then:
                  - light.control:
                      id: light_1
                      brightness: !lambda "return ((float)x)/255;"
        - id: COLOR_CONTROL
          attributes:
            - id: 3
              type: U16
              on_value:
                then:
                  - lambda: id(color_x) = (float)x/65536;
                  - light.control:
                      id: light_1
                      red: !lambda "return zigbee::get_r_from_xy(id(color_x), id(color_y));"
                      green: !lambda "return zigbee::get_g_from_xy(id(color_x), id(color_y));"
                      blue: !lambda "return zigbee::get_b_from_xy(id(color_x), id(color_y));"
            - id: 4
              type: U16
              on_value:
                then:
                  - lambda: id(color_y) = (float)x/65536;
                  - light.control:
                      id: light_1
                      red: !lambda "return zigbee::get_r_from_xy(id(color_x), id(color_y));"
                      green: !lambda "return zigbee::get_g_from_xy(id(color_x), id(color_y));"
                      blue: !lambda "return zigbee::get_b_from_xy(id(color_x), id(color_y));"
    - device_type: TEMPERATURE_SENSOR
      num: 2
      clusters:
        - id: REL_HUMIDITY_MEASUREMENT
          attributes:
            - id: 0
              type: U16
              report: true
              value: 200
        - id: TEMP_MEASUREMENT
          attributes:
            - id: 0x0
              type: S16
              report: true
              value: 100
  on_join:
    then:
      - logger.log: "Joined network"

light:
  - platform: esp32_rmt_led_strip
    rgb_order: GRB
    pin: 8
    num_leds: 1
    rmt_channel: 0
    id: light_1
    bit0_high: 100ns # rmt clk freq seems to be different on H2
    bit0_low: 300ns
    bit1_high: 300ns
    bit1_low: 100ns

binary_sensor:
  - platform: gpio
    pin:
      number: 9
      mode:
        input: true
        pullup: true
      inverted: true
    id: button_1
    on_press:
      then:
        - zigbee.report: zb
    on_click:
      min_length: 5s
      max_length: 20s
      then:
        - zigbee.reset: zb